From 2bc6b218717b9d08f466f88209251d54bc09b207 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Tue, 22 Sep 2026 19:14:30 +0100 Subject: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits. Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9") Cc: stable@vger.kernel.org Signed-off-by: Fuad Tabba Reviewed-by: Anshuman Khandual Reviewed-by: Oliver Upton Signed-off-by: Will Deacon --- drivers/bcma/README | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 drivers/bcma/README (limited to 'drivers/bcma/README') diff --git a/drivers/bcma/README b/drivers/bcma/README new file mode 100644 index 000000000..f7e7ce46c --- /dev/null +++ b/drivers/bcma/README @@ -0,0 +1,19 @@ +Broadcom introduced new bus as replacement for older SSB. It is based on AMBA, +however from programming point of view there is nothing AMBA specific we use. + +Standard AMBA drivers are platform specific, have hardcoded addresses and use +AMBA standard fields like CID and PID. + +In case of Broadcom's cards every device consists of: +1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated + as standard AMBA device. Reading it's CID or PID can cause machine lockup. +2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID) + and PIDs (0x103BB369), but we do not use that info for anything. One of that + devices is used for managing Broadcom specific core. + +Addresses of AMBA devices are not hardcoded in driver and have to be read from +EPROM. + +In this situation we decided to introduce separated bus. It can contain up to +16 devices identified by Broadcom specific fields: manufacturer, id, revision +and class. -- cgit v1.3.1