From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- drivers/base/regmap/regmap-w1.c | 238 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 drivers/base/regmap/regmap-w1.c (limited to 'drivers/base/regmap/regmap-w1.c') diff --git a/drivers/base/regmap/regmap-w1.c b/drivers/base/regmap/regmap-w1.c new file mode 100644 index 000000000..29fd24f9c --- /dev/null +++ b/drivers/base/regmap/regmap-w1.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Register map access API - W1 (1-Wire) support +// +// Copyright (c) 2017 Radioavionica Corporation +// Author: Alex A. Mihaylov + +#include +#include +#include + +#include "internal.h" + +#define W1_CMD_READ_DATA 0x69 +#define W1_CMD_WRITE_DATA 0x6C + +/* + * 1-Wire slaves registers with addess 8 bit and data 8 bit + */ + +static int w1_reg_a8_v8_read(void *context, unsigned int reg, unsigned int *val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 255) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_READ_DATA); + w1_write_8(sl->master, reg); + *val = w1_read_8(sl->master); + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static int w1_reg_a8_v8_write(void *context, unsigned int reg, unsigned int val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 255) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_WRITE_DATA); + w1_write_8(sl->master, reg); + w1_write_8(sl->master, val); + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +/* + * 1-Wire slaves registers with addess 8 bit and data 16 bit + */ + +static int w1_reg_a8_v16_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 255) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_READ_DATA); + w1_write_8(sl->master, reg); + *val = w1_read_8(sl->master); + *val |= w1_read_8(sl->master)<<8; + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static int w1_reg_a8_v16_write(void *context, unsigned int reg, + unsigned int val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 255) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_WRITE_DATA); + w1_write_8(sl->master, reg); + w1_write_8(sl->master, val & 0x00FF); + w1_write_8(sl->master, val>>8 & 0x00FF); + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +/* + * 1-Wire slaves registers with addess 16 bit and data 16 bit + */ + +static int w1_reg_a16_v16_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 65535) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_READ_DATA); + w1_write_8(sl->master, reg & 0x00FF); + w1_write_8(sl->master, reg>>8 & 0x00FF); + *val = w1_read_8(sl->master); + *val |= w1_read_8(sl->master)<<8; + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static int w1_reg_a16_v16_write(void *context, unsigned int reg, + unsigned int val) +{ + struct device *dev = context; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + int ret = 0; + + if (reg > 65535) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + if (!w1_reset_select_slave(sl)) { + w1_write_8(sl->master, W1_CMD_WRITE_DATA); + w1_write_8(sl->master, reg & 0x00FF); + w1_write_8(sl->master, reg>>8 & 0x00FF); + w1_write_8(sl->master, val & 0x00FF); + w1_write_8(sl->master, val>>8 & 0x00FF); + } else { + ret = -ENODEV; + } + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +/* + * Various types of supported bus addressing + */ + +static const struct regmap_bus regmap_w1_bus_a8_v8 = { + .reg_read = w1_reg_a8_v8_read, + .reg_write = w1_reg_a8_v8_write, +}; + +static const struct regmap_bus regmap_w1_bus_a8_v16 = { + .reg_read = w1_reg_a8_v16_read, + .reg_write = w1_reg_a8_v16_write, +}; + +static const struct regmap_bus regmap_w1_bus_a16_v16 = { + .reg_read = w1_reg_a16_v16_read, + .reg_write = w1_reg_a16_v16_write, +}; + +static const struct regmap_bus *regmap_get_w1_bus(struct device *w1_dev, + const struct regmap_config *config) +{ + if (config->reg_bits == 8 && config->val_bits == 8) + return ®map_w1_bus_a8_v8; + + if (config->reg_bits == 8 && config->val_bits == 16) + return ®map_w1_bus_a8_v16; + + if (config->reg_bits == 16 && config->val_bits == 16) + return ®map_w1_bus_a16_v16; + + return ERR_PTR(-ENOTSUPP); +} + +struct regmap *__regmap_init_w1(struct device *w1_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + + const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __regmap_init(w1_dev, bus, w1_dev, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__regmap_init_w1); + +struct regmap *__devm_regmap_init_w1(struct device *w1_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + + const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __devm_regmap_init(w1_dev, bus, w1_dev, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__devm_regmap_init_w1); + +MODULE_DESCRIPTION("Register map access API - W1 (1-Wire) support"); +MODULE_LICENSE("GPL"); -- cgit v1.3.1