From 33a154a96e71a34a1bcca9f40da343dbbf7b38b4 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 1 Oct 2026 14:52:55 +0000 Subject: selftests/bpf: Test packet range of pointers sharing an id Add tests where two packet pointers share an id and tightening one pointer's umax from its var_off would put it less than their constant distance from the other's umax: with an index & 0x38 capped at 50, the base pointer keeps umax 50, so the pointer 8 bytes further on must keep umax 58, even though its known bits allow at most 56. These refused a valid program or accepted an out-of-bounds access before the fix: - check the advanced copy, load through the base: valid, was refused; - check the base, load the byte at base + 1 through a copy advanced by 8: was accepted; - check base + 4, load 4 bytes at base + 2 through base + 8: reads two bytes past the checked range, was accepted; - the same as the second with data_meta pointers checked against data: was accepted. These pass with and without the fix and cover nearby paths: - subtract an unknown scalar from a checked pointer and load below it (the range is kept across a new id); - reach a load through two paths whose checks cover 8 and 7 bytes after the loaded pointer; the second path must not be pruned by the first; - spill a copy of a pointer, check the pointer, fill the copy and load one byte past the checked range: the load is refused, and the copy has the range of the check. Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20261001145255.855630-2-alexei.starovoitov@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi --- drivers/acpi/thermal_lib.c | 166 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 drivers/acpi/thermal_lib.c (limited to 'drivers/acpi/thermal_lib.c') diff --git a/drivers/acpi/thermal_lib.c b/drivers/acpi/thermal_lib.c new file mode 100644 index 000000000..f81591927 --- /dev/null +++ b/drivers/acpi/thermal_lib.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2023 Linaro Limited + * Copyright 2023 Intel Corporation + * + * Library routines for retrieving trip point temperature values from the + * platform firmware via ACPI. + */ +#include +#include +#include +#include "internal.h" + +/* + * Minimum temperature for full military grade is 218°K (-55°C) and + * max temperature is 448°K (175°C). We can consider those values as + * the boundaries for the [trips] temperature returned by the + * firmware. Any values out of these boundaries may be considered + * bogus and we can assume the firmware has no data to provide. + */ +#define TEMP_MIN_DECIK 2180ULL +#define TEMP_MAX_DECIK 4480ULL + +static int acpi_trip_temp(struct acpi_device *adev, char *obj_name, + int *ret_temp) +{ + unsigned long long temp; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, obj_name, NULL, &temp); + if (ACPI_FAILURE(status)) { + acpi_handle_debug(adev->handle, "%s evaluation failed\n", obj_name); + return -ENODATA; + } + + if (temp >= TEMP_MIN_DECIK && temp <= TEMP_MAX_DECIK) { + *ret_temp = temp; + } else { + acpi_handle_debug(adev->handle, "%s result %llu out of range\n", + obj_name, temp); + *ret_temp = THERMAL_TEMP_INVALID; + } + + return 0; +} + +int acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp) +{ + char obj_name[] = {'_', 'A', 'C', '0' + id, '\0'}; + + if (id < 0 || id > 9) + return -EINVAL; + + return acpi_trip_temp(adev, obj_name, ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_active_trip_temp, "ACPI_THERMAL"); + +int acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_PSV", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_passive_trip_temp, "ACPI_THERMAL"); + +int acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_HOT", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_hot_trip_temp, "ACPI_THERMAL"); + +int acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_CRT", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_critical_trip_temp, "ACPI_THERMAL"); + +static int thermal_temp(int error, int temp_decik, int *ret_temp) +{ + if (error) + return error; + + if (temp_decik == THERMAL_TEMP_INVALID) + *ret_temp = THERMAL_TEMP_INVALID; + else + *ret_temp = deci_kelvin_to_millicelsius(temp_decik); + + return 0; +} + +/** + * thermal_acpi_active_trip_temp - Retrieve active trip point temperature + * @adev: Target thermal zone ACPI device object. + * @id: Active cooling level (0 - 9). + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _ACx object for the thermal zone represented by @adev to obtain + * the temperature of the active cooling trip point corresponding to the active + * cooling level given by @id. + * + * Return 0 on success or a negative error value on failure. + */ +int thermal_acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_active_trip_temp(adev, id, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_active_trip_temp); + +/** + * thermal_acpi_passive_trip_temp - Retrieve passive trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _PSV object for the thermal zone represented by @adev to obtain + * the temperature of the passive cooling trip point. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_passive_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_passive_trip_temp); + +/** + * thermal_acpi_hot_trip_temp - Retrieve hot trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _HOT object for the thermal zone represented by @adev to obtain + * the temperature of the trip point at which the system is expected to be put + * into the S4 sleep state. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_hot_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_hot_trip_temp); + +/** + * thermal_acpi_critical_trip_temp - Retrieve critical trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _CRT object for the thermal zone represented by @adev to obtain + * the temperature of the critical cooling trip point. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_critical_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_critical_trip_temp); -- cgit v1.3.1