From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- arch/powerpc/boot/.gitignore | 47 + arch/powerpc/boot/44x.h | 13 + arch/powerpc/boot/4xx.c | 533 ++++++++++ arch/powerpc/boot/4xx.h | 26 + arch/powerpc/boot/Makefile | 499 +++++++++ arch/powerpc/boot/README | 11 + arch/powerpc/boot/addnote.c | 248 +++++ arch/powerpc/boot/bamboo.c | 45 + arch/powerpc/boot/cpm-serial.c | 295 ++++++ arch/powerpc/boot/crt0.S | 308 ++++++ arch/powerpc/boot/crtsavres.S | 233 ++++ arch/powerpc/boot/cuboot-52xx.c | 60 ++ arch/powerpc/boot/cuboot-824x.c | 50 + arch/powerpc/boot/cuboot-83xx.c | 56 + arch/powerpc/boot/cuboot-85xx-cpm2.c | 63 ++ arch/powerpc/boot/cuboot-85xx.c | 59 ++ arch/powerpc/boot/cuboot-8xx.c | 44 + arch/powerpc/boot/cuboot-amigaone.c | 32 + arch/powerpc/boot/cuboot-bamboo.c | 28 + arch/powerpc/boot/cuboot-ebony.c | 28 + arch/powerpc/boot/cuboot-katmai.c | 54 + arch/powerpc/boot/cuboot-pq2.c | 269 +++++ arch/powerpc/boot/cuboot-rainier.c | 54 + arch/powerpc/boot/cuboot-sam440ep.c | 46 + arch/powerpc/boot/cuboot-sequoia.c | 54 + arch/powerpc/boot/cuboot-taishan.c | 54 + arch/powerpc/boot/cuboot-warp.c | 35 + arch/powerpc/boot/cuboot-yosemite.c | 41 + arch/powerpc/boot/cuboot.c | 29 + arch/powerpc/boot/cuboot.h | 15 + arch/powerpc/boot/dcr.h | 197 ++++ arch/powerpc/boot/decompress.c | 143 +++ arch/powerpc/boot/devtree.c | 377 +++++++ arch/powerpc/boot/div64.S | 107 ++ arch/powerpc/boot/dts/Makefile | 78 ++ arch/powerpc/boot/dts/a3m071.dts | 138 +++ arch/powerpc/boot/dts/a4m072.dts | 147 +++ arch/powerpc/boot/dts/ac14xx.dts | 395 +++++++ arch/powerpc/boot/dts/adder875-redboot.dts | 179 ++++ arch/powerpc/boot/dts/adder875-uboot.dts | 178 ++++ arch/powerpc/boot/dts/akebono.dts | 415 ++++++++ arch/powerpc/boot/dts/amigaone.dts | 169 +++ arch/powerpc/boot/dts/arches.dts | 341 ++++++ arch/powerpc/boot/dts/asp834x-redboot.dts | 306 ++++++ arch/powerpc/boot/dts/bamboo.dts | 302 ++++++ arch/powerpc/boot/dts/bluestone.dts | 370 +++++++ arch/powerpc/boot/dts/canyonlands.dts | 548 ++++++++++ arch/powerpc/boot/dts/charon.dts | 232 ++++ arch/powerpc/boot/dts/cm5200.dts | 85 ++ arch/powerpc/boot/dts/currituck.dts | 242 +++++ arch/powerpc/boot/dts/digsy_mtc.dts | 149 +++ arch/powerpc/boot/dts/ebony.dts | 337 ++++++ arch/powerpc/boot/dts/eiger.dts | 427 ++++++++ arch/powerpc/boot/dts/ep8248e.dts | 199 ++++ arch/powerpc/boot/dts/ep88xc.dts | 209 ++++ arch/powerpc/boot/dts/fsl/Makefile | 46 + arch/powerpc/boot/dts/fsl/b4420qds.dts | 50 + arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 97 ++ arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 85 ++ arch/powerpc/boot/dts/fsl/b4860qds.dts | 117 +++ arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 284 +++++ arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 104 ++ arch/powerpc/boot/dts/fsl/b4qds.dtsi | 280 +++++ arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 487 +++++++++ arch/powerpc/boot/dts/fsl/bsc9131rdb.dts | 30 + arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi | 104 ++ arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi | 189 ++++ arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi | 62 ++ arch/powerpc/boot/dts/fsl/bsc9132qds.dts | 46 + arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi | 113 ++ arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 209 ++++ arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi | 67 ++ arch/powerpc/boot/dts/fsl/c293pcie.dts | 224 ++++ arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 189 ++++ arch/powerpc/boot/dts/fsl/c293si-pre.dtsi | 63 ++ arch/powerpc/boot/dts/fsl/cyrus_p5020.dts | 151 +++ arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi | 59 ++ arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi | 51 + arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi | 52 + arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi | 60 ++ arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi | 65 ++ arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 82 ++ arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 82 ++ arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi | 82 ++ arch/powerpc/boot/dts/fsl/ge_imp3a.dts | 251 +++++ arch/powerpc/boot/dts/fsl/gef_ppc9a.dts | 216 ++++ arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 234 +++++ arch/powerpc/boot/dts/fsl/gef_sbc610.dts | 214 ++++ arch/powerpc/boot/dts/fsl/kmcent2.dts | 339 ++++++ arch/powerpc/boot/dts/fsl/kmcoge4.dts | 216 ++++ arch/powerpc/boot/dts/fsl/mpc8536ds.dts | 105 ++ arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi | 244 +++++ arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts | 105 ++ arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi | 262 +++++ arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/mpc8544ds.dts | 103 ++ arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi | 207 ++++ arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi | 193 ++++ arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi | 161 +++ arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi | 67 ++ arch/powerpc/boot/dts/fsl/mpc8568mds.dts | 310 ++++++ arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | 270 +++++ arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/mpc8569mds.dts | 443 ++++++++ arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi | 304 ++++++ arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi | 67 ++ arch/powerpc/boot/dts/fsl/mpc8572ds.dts | 86 ++ arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi | 428 ++++++++ arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts | 86 ++ arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts | 78 ++ arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts | 111 ++ arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi | 198 ++++ arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi | 73 ++ arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi | 144 +++ arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi | 54 + arch/powerpc/boot/dts/fsl/mvme2500.dts | 276 +++++ arch/powerpc/boot/dts/fsl/mvme7100.dts | 148 +++ arch/powerpc/boot/dts/fsl/oca4080.dts | 145 +++ arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts | 19 + arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi | 85 ++ arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts | 46 + arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts | 47 + arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts | 74 ++ arch/powerpc/boot/dts/fsl/p1010rdb.dtsi | 217 ++++ arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi | 79 ++ arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi | 79 ++ arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 205 ++++ arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi | 67 ++ arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi | 151 +++ arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts | 89 ++ arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts | 89 ++ arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi | 247 +++++ arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts | 90 ++ arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts | 90 ++ .../boot/dts/fsl/p1020rdb-pc_camp_core0.dts | 60 ++ .../boot/dts/fsl/p1020rdb-pc_camp_core1.dts | 138 +++ arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts | 292 +++++ arch/powerpc/boot/dts/fsl/p1020rdb.dts | 62 ++ arch/powerpc/boot/dts/fsl/p1020rdb.dtsi | 246 +++++ arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts | 62 ++ arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 190 ++++ arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi | 71 ++ arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi | 140 +++ arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts | 89 ++ arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts | 89 ++ arch/powerpc/boot/dts/fsl/p1021mds.dts | 319 ++++++ arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi | 256 +++++ arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts | 96 ++ arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts | 96 ++ arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 252 +++++ arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi | 71 ++ arch/powerpc/boot/dts/fsl/p1022ds.dtsi | 239 +++++ arch/powerpc/boot/dts/fsl/p1022ds_32b.dts | 103 ++ arch/powerpc/boot/dts/fsl/p1022ds_36b.dts | 103 ++ arch/powerpc/boot/dts/fsl/p1022rdk.dts | 188 ++++ arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 252 +++++ arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 73 ++ arch/powerpc/boot/dts/fsl/p1023rdb.dts | 260 +++++ arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 307 ++++++ arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi | 79 ++ arch/powerpc/boot/dts/fsl/p1024rdb.dtsi | 228 ++++ arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts | 87 ++ arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts | 87 ++ arch/powerpc/boot/dts/fsl/p1025rdb.dtsi | 326 ++++++ arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts | 133 +++ arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts | 93 ++ arch/powerpc/boot/dts/fsl/p1025twr.dts | 95 ++ arch/powerpc/boot/dts/fsl/p1025twr.dtsi | 292 +++++ arch/powerpc/boot/dts/fsl/p2020ds.dts | 85 ++ arch/powerpc/boot/dts/fsl/p2020ds.dtsi | 327 ++++++ arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi | 241 +++++ arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts | 96 ++ arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts | 96 ++ arch/powerpc/boot/dts/fsl/p2020rdb.dts | 287 +++++ arch/powerpc/boot/dts/fsl/p2020si-post.dtsi | 218 ++++ arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi | 72 ++ arch/powerpc/boot/dts/fsl/p2041rdb.dts | 340 ++++++ arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 458 ++++++++ arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 130 +++ arch/powerpc/boot/dts/fsl/p3041ds.dts | 394 +++++++ arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 469 +++++++++ arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 131 +++ arch/powerpc/boot/dts/fsl/p4080ds.dts | 439 ++++++++ arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 492 +++++++++ arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 175 +++ arch/powerpc/boot/dts/fsl/p5020ds.dts | 394 +++++++ arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 478 +++++++++ arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 117 +++ arch/powerpc/boot/dts/fsl/p5040ds.dts | 486 +++++++++ arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 462 ++++++++ arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 143 +++ arch/powerpc/boot/dts/fsl/ppa8548.dts | 160 +++ arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi | 51 + arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi | 54 + arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi | 54 + arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi | 54 + arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi | 54 + arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi | 39 + arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 61 ++ arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 61 ++ arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 60 ++ arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi | 42 + arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi | 42 + arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi | 42 + arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi | 43 + arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi | 43 + arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi | 42 + arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 79 ++ arch/powerpc/boot/dts/fsl/pq3-power.dtsi | 19 + arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi | 40 + arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi | 40 + arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi | 43 + arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi | 45 + arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi | 45 + arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi | 45 + arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi | 67 ++ arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi | 41 + arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi | 90 ++ arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 39 + arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 39 + arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi | 66 ++ arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi | 51 + arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi | 51 + arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi | 40 + arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi | 62 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi | 104 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi | 61 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi | 104 ++ .../dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 73 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 77 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 77 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 45 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 45 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi | 109 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 77 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 77 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 76 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi | 109 ++ arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 99 ++ arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi | 53 + arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi | 53 + arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi | 106 ++ arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi | 149 +++ arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi | 101 ++ arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 ++ arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi | 68 ++ arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi | 39 + arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi | 39 + arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi | 101 ++ arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi | 110 ++ arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi | 110 ++ arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi | 119 +++ arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi | 119 +++ arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi | 57 + arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi | 41 + arch/powerpc/boot/dts/fsl/t1023rdb.dts | 232 ++++ arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 523 +++++++++ arch/powerpc/boot/dts/fsl/t1024qds.dts | 280 +++++ arch/powerpc/boot/dts/fsl/t1024rdb.dts | 268 +++++ arch/powerpc/boot/dts/fsl/t1024si-post.dtsi | 100 ++ arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi | 95 ++ arch/powerpc/boot/dts/fsl/t1040d4rdb.dts | 46 + arch/powerpc/boot/dts/fsl/t1040qds.dts | 46 + arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 29 + arch/powerpc/boot/dts/fsl/t1040rdb.dts | 188 ++++ arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 757 +++++++++++++ arch/powerpc/boot/dts/fsl/t1042d4rdb.dts | 105 ++ arch/powerpc/boot/dts/fsl/t1042qds.dts | 46 + arch/powerpc/boot/dts/fsl/t1042rdb.dts | 76 ++ arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts | 73 ++ arch/powerpc/boot/dts/fsl/t1042si-post.dtsi | 37 + arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi | 253 +++++ arch/powerpc/boot/dts/fsl/t104xqds.dtsi | 407 +++++++ arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 263 +++++ arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi | 115 ++ arch/powerpc/boot/dts/fsl/t2080qds.dts | 213 ++++ arch/powerpc/boot/dts/fsl/t2080rdb.dts | 122 +++ arch/powerpc/boot/dts/fsl/t2080si-post.dtsi | 69 ++ arch/powerpc/boot/dts/fsl/t2081qds.dts | 265 +++++ arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 677 ++++++++++++ arch/powerpc/boot/dts/fsl/t208xqds.dtsi | 277 +++++ arch/powerpc/boot/dts/fsl/t208xrdb.dtsi | 211 ++++ arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi | 110 ++ arch/powerpc/boot/dts/fsl/t4240qds.dts | 708 +++++++++++++ arch/powerpc/boot/dts/fsl/t4240rdb.dts | 363 +++++++ arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 1111 ++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 175 +++ arch/powerpc/boot/dts/fsp2.dts | 613 +++++++++++ arch/powerpc/boot/dts/gamecube.dts | 109 ++ arch/powerpc/boot/dts/glacier.dts | 576 ++++++++++ arch/powerpc/boot/dts/holly.dts | 196 ++++ arch/powerpc/boot/dts/icon.dts | 440 ++++++++ arch/powerpc/boot/dts/iss4xx-mpic.dts | 155 +++ arch/powerpc/boot/dts/iss4xx.dts | 116 ++ arch/powerpc/boot/dts/katmai.dts | 492 +++++++++ arch/powerpc/boot/dts/kmeter1.dts | 528 ++++++++++ arch/powerpc/boot/dts/ksi8560.dts | 346 ++++++ arch/powerpc/boot/dts/kuroboxHD.dts | 147 +++ arch/powerpc/boot/dts/kuroboxHG.dts | 147 +++ arch/powerpc/boot/dts/lite5200.dts | 304 ++++++ arch/powerpc/boot/dts/lite5200b.dts | 157 +++ arch/powerpc/boot/dts/media5200.dts | 142 +++ arch/powerpc/boot/dts/mgcoge.dts | 253 +++++ arch/powerpc/boot/dts/microwatt.dts | 255 +++++ arch/powerpc/boot/dts/motionpro.dts | 132 +++ arch/powerpc/boot/dts/mpc5121.dtsi | 526 +++++++++ arch/powerpc/boot/dts/mpc5121ads.dts | 174 +++ arch/powerpc/boot/dts/mpc5125twr.dts | 293 ++++++ arch/powerpc/boot/dts/mpc5200b.dtsi | 290 +++++ arch/powerpc/boot/dts/mpc8308_p1m.dts | 335 ++++++ arch/powerpc/boot/dts/mpc8308rdb.dts | 307 ++++++ arch/powerpc/boot/dts/mpc8313erdb.dts | 414 ++++++++ arch/powerpc/boot/dts/mpc8315erdb.dts | 494 +++++++++ arch/powerpc/boot/dts/mpc832x_rdb.dts | 363 +++++++ arch/powerpc/boot/dts/mpc8349emitx.dts | 421 ++++++++ arch/powerpc/boot/dts/mpc8349emitxgp.dts | 246 +++++ arch/powerpc/boot/dts/mpc836x_rdk.dts | 464 ++++++++ arch/powerpc/boot/dts/mpc8377_rdb.dts | 499 +++++++++ arch/powerpc/boot/dts/mpc8377_wlan.dts | 460 ++++++++ arch/powerpc/boot/dts/mpc8378_rdb.dts | 483 +++++++++ arch/powerpc/boot/dts/mpc8379_rdb.dts | 449 ++++++++ arch/powerpc/boot/dts/mpc866ads.dts | 186 ++++ arch/powerpc/boot/dts/mpc885ads.dts | 239 +++++ arch/powerpc/boot/dts/mucmc52.dts | 222 ++++ arch/powerpc/boot/dts/mvme5100.dts | 185 ++++ arch/powerpc/boot/dts/o2d.dts | 43 + arch/powerpc/boot/dts/o2d.dtsi | 112 ++ arch/powerpc/boot/dts/o2d300.dts | 48 + arch/powerpc/boot/dts/o2dnt2.dts | 44 + arch/powerpc/boot/dts/o2i.dts | 29 + arch/powerpc/boot/dts/o2mnt.dts | 29 + arch/powerpc/boot/dts/o3dnt.dts | 44 + arch/powerpc/boot/dts/pcm030.dts | 106 ++ arch/powerpc/boot/dts/pcm032.dts | 183 ++++ arch/powerpc/boot/dts/pdm360ng.dts | 195 ++++ arch/powerpc/boot/dts/ps3.dts | 58 + arch/powerpc/boot/dts/rainier.dts | 350 ++++++ arch/powerpc/boot/dts/redwood.dts | 368 +++++++ arch/powerpc/boot/dts/sam440ep.dts | 293 ++++++ arch/powerpc/boot/dts/sequoia.dts | 412 ++++++++ arch/powerpc/boot/dts/socrates.dts | 348 ++++++ arch/powerpc/boot/dts/storcenter.dts | 142 +++ arch/powerpc/boot/dts/stx_gp3_8560.dts | 302 ++++++ arch/powerpc/boot/dts/stxssa8555.dts | 376 +++++++ arch/powerpc/boot/dts/taishan.dts | 427 ++++++++ arch/powerpc/boot/dts/tqm5200.dts | 207 ++++ arch/powerpc/boot/dts/tqm8540.dts | 344 ++++++ arch/powerpc/boot/dts/tqm8541.dts | 324 ++++++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 495 +++++++++ arch/powerpc/boot/dts/tqm8548.dts | 495 +++++++++ arch/powerpc/boot/dts/tqm8555.dts | 324 ++++++ arch/powerpc/boot/dts/tqm8560.dts | 397 +++++++ arch/powerpc/boot/dts/tqm8xx.dts | 192 ++++ arch/powerpc/boot/dts/turris1x.dts | 520 +++++++++ arch/powerpc/boot/dts/uc101.dts | 152 +++ arch/powerpc/boot/dts/warp.dts | 307 ++++++ arch/powerpc/boot/dts/wii.dts | 272 +++++ arch/powerpc/boot/dts/xcalibur1501.dts | 693 ++++++++++++ arch/powerpc/boot/dts/xpedite5200.dts | 465 ++++++++ arch/powerpc/boot/dts/xpedite5200_xmon.dts | 505 +++++++++ arch/powerpc/boot/dts/xpedite5301.dts | 637 +++++++++++ arch/powerpc/boot/dts/xpedite5330.dts | 704 +++++++++++++ arch/powerpc/boot/dts/xpedite5370.dts | 635 +++++++++++ arch/powerpc/boot/dts/yosemite.dts | 332 ++++++ arch/powerpc/boot/ebony.c | 88 ++ arch/powerpc/boot/elf.h | 158 +++ arch/powerpc/boot/elf_util.c | 78 ++ arch/powerpc/boot/ep8248e.c | 52 + arch/powerpc/boot/ep88xc.c | 51 + arch/powerpc/boot/epapr-wrapper.c | 10 + arch/powerpc/boot/epapr.c | 63 ++ arch/powerpc/boot/fixed-head.S | 5 + arch/powerpc/boot/fixup-headers.sed | 12 + arch/powerpc/boot/fsl-soc.c | 54 + arch/powerpc/boot/fsl-soc.h | 9 + arch/powerpc/boot/gamecube-head.S | 106 ++ arch/powerpc/boot/gamecube.c | 30 + arch/powerpc/boot/hack-coff.c | 80 ++ arch/powerpc/boot/holly.c | 30 + arch/powerpc/boot/install.sh | 37 + arch/powerpc/boot/io.h | 103 ++ arch/powerpc/boot/libfdt-wrapper.c | 185 ++++ arch/powerpc/boot/libfdt_env.h | 27 + arch/powerpc/boot/main.c | 284 +++++ arch/powerpc/boot/microwatt.c | 24 + arch/powerpc/boot/mktree.c | 151 +++ arch/powerpc/boot/motload-head.S | 12 + arch/powerpc/boot/mpc52xx-psc.c | 65 ++ arch/powerpc/boot/mpc8xx.c | 78 ++ arch/powerpc/boot/mpc8xx.h | 12 + arch/powerpc/boot/mvme5100.c | 23 + arch/powerpc/boot/mvme7100.c | 54 + arch/powerpc/boot/ns16550.c | 84 ++ arch/powerpc/boot/of.c | 93 ++ arch/powerpc/boot/of.h | 47 + arch/powerpc/boot/ofconsole.c | 43 + arch/powerpc/boot/oflib.c | 219 ++++ arch/powerpc/boot/opal-calls.S | 67 ++ arch/powerpc/boot/opal.c | 97 ++ arch/powerpc/boot/ops.h | 259 +++++ arch/powerpc/boot/page.h | 30 + arch/powerpc/boot/planetcore.c | 130 +++ arch/powerpc/boot/planetcore.h | 47 + arch/powerpc/boot/ppc_asm.h | 97 ++ arch/powerpc/boot/ppcboot.h | 95 ++ arch/powerpc/boot/pq2.c | 99 ++ arch/powerpc/boot/pq2.h | 12 + arch/powerpc/boot/ps3-head.S | 72 ++ arch/powerpc/boot/ps3-hvcall.S | 174 +++ arch/powerpc/boot/ps3.c | 139 +++ arch/powerpc/boot/pseries-head.S | 9 + arch/powerpc/boot/redboot-83xx.c | 57 + arch/powerpc/boot/redboot-8xx.c | 55 + arch/powerpc/boot/redboot.h | 57 + arch/powerpc/boot/reg.h | 26 + arch/powerpc/boot/rs6000.h | 236 +++++ arch/powerpc/boot/serial.c | 152 +++ arch/powerpc/boot/simple_alloc.c | 151 +++ arch/powerpc/boot/simpleboot.c | 87 ++ arch/powerpc/boot/stdbool.h | 9 + arch/powerpc/boot/stdint.h | 9 + arch/powerpc/boot/stdio.c | 343 ++++++ arch/powerpc/boot/stdio.h | 17 + arch/powerpc/boot/stdlib.c | 42 + arch/powerpc/boot/stdlib.h | 7 + arch/powerpc/boot/string.S | 252 +++++ arch/powerpc/boot/string.h | 21 + arch/powerpc/boot/swab.h | 30 + arch/powerpc/boot/treeboot-akebono.c | 159 +++ arch/powerpc/boot/treeboot-bamboo.c | 40 + arch/powerpc/boot/treeboot-currituck.c | 115 ++ arch/powerpc/boot/treeboot-ebony.c | 29 + arch/powerpc/boot/treeboot-iss4xx.c | 73 ++ arch/powerpc/boot/types.h | 52 + arch/powerpc/boot/ugecon.c | 142 +++ arch/powerpc/boot/ugecon.h | 19 + arch/powerpc/boot/util.S | 67 ++ arch/powerpc/boot/wii-head.S | 137 +++ arch/powerpc/boot/wii.c | 153 +++ arch/powerpc/boot/wrapper | 578 ++++++++++ arch/powerpc/boot/xz_config.h | 57 + arch/powerpc/boot/zImage.coff.lds.S | 50 + arch/powerpc/boot/zImage.lds.S | 97 ++ arch/powerpc/boot/zImage.ps3.lds.S | 51 + 484 files changed, 79132 insertions(+) create mode 100644 arch/powerpc/boot/.gitignore create mode 100644 arch/powerpc/boot/44x.h create mode 100644 arch/powerpc/boot/4xx.c create mode 100644 arch/powerpc/boot/4xx.h create mode 100644 arch/powerpc/boot/Makefile create mode 100644 arch/powerpc/boot/README create mode 100644 arch/powerpc/boot/addnote.c create mode 100644 arch/powerpc/boot/bamboo.c create mode 100644 arch/powerpc/boot/cpm-serial.c create mode 100644 arch/powerpc/boot/crt0.S create mode 100644 arch/powerpc/boot/crtsavres.S create mode 100644 arch/powerpc/boot/cuboot-52xx.c create mode 100644 arch/powerpc/boot/cuboot-824x.c create mode 100644 arch/powerpc/boot/cuboot-83xx.c create mode 100644 arch/powerpc/boot/cuboot-85xx-cpm2.c create mode 100644 arch/powerpc/boot/cuboot-85xx.c create mode 100644 arch/powerpc/boot/cuboot-8xx.c create mode 100644 arch/powerpc/boot/cuboot-amigaone.c create mode 100644 arch/powerpc/boot/cuboot-bamboo.c create mode 100644 arch/powerpc/boot/cuboot-ebony.c create mode 100644 arch/powerpc/boot/cuboot-katmai.c create mode 100644 arch/powerpc/boot/cuboot-pq2.c create mode 100644 arch/powerpc/boot/cuboot-rainier.c create mode 100644 arch/powerpc/boot/cuboot-sam440ep.c create mode 100644 arch/powerpc/boot/cuboot-sequoia.c create mode 100644 arch/powerpc/boot/cuboot-taishan.c create mode 100644 arch/powerpc/boot/cuboot-warp.c create mode 100644 arch/powerpc/boot/cuboot-yosemite.c create mode 100644 arch/powerpc/boot/cuboot.c create mode 100644 arch/powerpc/boot/cuboot.h create mode 100644 arch/powerpc/boot/dcr.h create mode 100644 arch/powerpc/boot/decompress.c create mode 100644 arch/powerpc/boot/devtree.c create mode 100644 arch/powerpc/boot/div64.S create mode 100644 arch/powerpc/boot/dts/Makefile create mode 100644 arch/powerpc/boot/dts/a3m071.dts create mode 100644 arch/powerpc/boot/dts/a4m072.dts create mode 100644 arch/powerpc/boot/dts/ac14xx.dts create mode 100644 arch/powerpc/boot/dts/adder875-redboot.dts create mode 100644 arch/powerpc/boot/dts/adder875-uboot.dts create mode 100644 arch/powerpc/boot/dts/akebono.dts create mode 100644 arch/powerpc/boot/dts/amigaone.dts create mode 100644 arch/powerpc/boot/dts/arches.dts create mode 100644 arch/powerpc/boot/dts/asp834x-redboot.dts create mode 100644 arch/powerpc/boot/dts/bamboo.dts create mode 100644 arch/powerpc/boot/dts/bluestone.dts create mode 100644 arch/powerpc/boot/dts/canyonlands.dts create mode 100644 arch/powerpc/boot/dts/charon.dts create mode 100644 arch/powerpc/boot/dts/cm5200.dts create mode 100644 arch/powerpc/boot/dts/currituck.dts create mode 100644 arch/powerpc/boot/dts/digsy_mtc.dts create mode 100644 arch/powerpc/boot/dts/ebony.dts create mode 100644 arch/powerpc/boot/dts/eiger.dts create mode 100644 arch/powerpc/boot/dts/ep8248e.dts create mode 100644 arch/powerpc/boot/dts/ep88xc.dts create mode 100644 arch/powerpc/boot/dts/fsl/Makefile create mode 100644 arch/powerpc/boot/dts/fsl/b4420qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/b4860qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/b4qds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9131rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9132qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/c293pcie.dts create mode 100644 arch/powerpc/boot/dts/fsl/c293si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/cyrus_p5020.dts create mode 100644 arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/ge_imp3a.dts create mode 100644 arch/powerpc/boot/dts/fsl/gef_ppc9a.dts create mode 100644 arch/powerpc/boot/dts/fsl/gef_sbc310.dts create mode 100644 arch/powerpc/boot/dts/fsl/gef_sbc610.dts create mode 100644 arch/powerpc/boot/dts/fsl/kmcent2.dts create mode 100644 arch/powerpc/boot/dts/fsl/kmcoge4.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8568mds.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8569mds.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mvme2500.dts create mode 100644 arch/powerpc/boot/dts/fsl/mvme7100.dts create mode 100644 arch/powerpc/boot/dts/fsl/oca4080.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1021mds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1022ds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1022ds_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1022ds_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1022rdk.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1023rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1024rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1025rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1025twr.dts create mode 100644 arch/powerpc/boot/dts/fsl/p1025twr.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2020ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p2020ds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts create mode 100644 arch/powerpc/boot/dts/fsl/p2020rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2041rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p3041ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p4080ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p5020ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p5040ds.dts create mode 100644 arch/powerpc/boot/dts/fsl/p5040si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/ppa8548.dts create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-power.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t1023rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1023si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t1024qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1024rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1024si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t1040d4rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1040qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t1042d4rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1042qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1042rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts create mode 100644 arch/powerpc/boot/dts/fsl/t1042si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t104xqds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t104xrdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t2080qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t2080rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t2080si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t2081qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t208xqds.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t208xrdb.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t4240qds.dts create mode 100644 arch/powerpc/boot/dts/fsl/t4240rdb.dts create mode 100644 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/fsp2.dts create mode 100644 arch/powerpc/boot/dts/gamecube.dts create mode 100644 arch/powerpc/boot/dts/glacier.dts create mode 100644 arch/powerpc/boot/dts/holly.dts create mode 100644 arch/powerpc/boot/dts/icon.dts create mode 100644 arch/powerpc/boot/dts/iss4xx-mpic.dts create mode 100644 arch/powerpc/boot/dts/iss4xx.dts create mode 100644 arch/powerpc/boot/dts/katmai.dts create mode 100644 arch/powerpc/boot/dts/kmeter1.dts create mode 100644 arch/powerpc/boot/dts/ksi8560.dts create mode 100644 arch/powerpc/boot/dts/kuroboxHD.dts create mode 100644 arch/powerpc/boot/dts/kuroboxHG.dts create mode 100644 arch/powerpc/boot/dts/lite5200.dts create mode 100644 arch/powerpc/boot/dts/lite5200b.dts create mode 100644 arch/powerpc/boot/dts/media5200.dts create mode 100644 arch/powerpc/boot/dts/mgcoge.dts create mode 100644 arch/powerpc/boot/dts/microwatt.dts create mode 100644 arch/powerpc/boot/dts/motionpro.dts create mode 100644 arch/powerpc/boot/dts/mpc5121.dtsi create mode 100644 arch/powerpc/boot/dts/mpc5121ads.dts create mode 100644 arch/powerpc/boot/dts/mpc5125twr.dts create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi create mode 100644 arch/powerpc/boot/dts/mpc8308_p1m.dts create mode 100644 arch/powerpc/boot/dts/mpc8308rdb.dts create mode 100644 arch/powerpc/boot/dts/mpc8313erdb.dts create mode 100644 arch/powerpc/boot/dts/mpc8315erdb.dts create mode 100644 arch/powerpc/boot/dts/mpc832x_rdb.dts create mode 100644 arch/powerpc/boot/dts/mpc8349emitx.dts create mode 100644 arch/powerpc/boot/dts/mpc8349emitxgp.dts create mode 100644 arch/powerpc/boot/dts/mpc836x_rdk.dts create mode 100644 arch/powerpc/boot/dts/mpc8377_rdb.dts create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts create mode 100644 arch/powerpc/boot/dts/mpc8378_rdb.dts create mode 100644 arch/powerpc/boot/dts/mpc8379_rdb.dts create mode 100644 arch/powerpc/boot/dts/mpc866ads.dts create mode 100644 arch/powerpc/boot/dts/mpc885ads.dts create mode 100644 arch/powerpc/boot/dts/mucmc52.dts create mode 100644 arch/powerpc/boot/dts/mvme5100.dts create mode 100644 arch/powerpc/boot/dts/o2d.dts create mode 100644 arch/powerpc/boot/dts/o2d.dtsi create mode 100644 arch/powerpc/boot/dts/o2d300.dts create mode 100644 arch/powerpc/boot/dts/o2dnt2.dts create mode 100644 arch/powerpc/boot/dts/o2i.dts create mode 100644 arch/powerpc/boot/dts/o2mnt.dts create mode 100644 arch/powerpc/boot/dts/o3dnt.dts create mode 100644 arch/powerpc/boot/dts/pcm030.dts create mode 100644 arch/powerpc/boot/dts/pcm032.dts create mode 100644 arch/powerpc/boot/dts/pdm360ng.dts create mode 100644 arch/powerpc/boot/dts/ps3.dts create mode 100644 arch/powerpc/boot/dts/rainier.dts create mode 100644 arch/powerpc/boot/dts/redwood.dts create mode 100644 arch/powerpc/boot/dts/sam440ep.dts create mode 100644 arch/powerpc/boot/dts/sequoia.dts create mode 100644 arch/powerpc/boot/dts/socrates.dts create mode 100644 arch/powerpc/boot/dts/storcenter.dts create mode 100644 arch/powerpc/boot/dts/stx_gp3_8560.dts create mode 100644 arch/powerpc/boot/dts/stxssa8555.dts create mode 100644 arch/powerpc/boot/dts/taishan.dts create mode 100644 arch/powerpc/boot/dts/tqm5200.dts create mode 100644 arch/powerpc/boot/dts/tqm8540.dts create mode 100644 arch/powerpc/boot/dts/tqm8541.dts create mode 100644 arch/powerpc/boot/dts/tqm8548-bigflash.dts create mode 100644 arch/powerpc/boot/dts/tqm8548.dts create mode 100644 arch/powerpc/boot/dts/tqm8555.dts create mode 100644 arch/powerpc/boot/dts/tqm8560.dts create mode 100644 arch/powerpc/boot/dts/tqm8xx.dts create mode 100644 arch/powerpc/boot/dts/turris1x.dts create mode 100644 arch/powerpc/boot/dts/uc101.dts create mode 100644 arch/powerpc/boot/dts/warp.dts create mode 100644 arch/powerpc/boot/dts/wii.dts create mode 100644 arch/powerpc/boot/dts/xcalibur1501.dts create mode 100644 arch/powerpc/boot/dts/xpedite5200.dts create mode 100644 arch/powerpc/boot/dts/xpedite5200_xmon.dts create mode 100644 arch/powerpc/boot/dts/xpedite5301.dts create mode 100644 arch/powerpc/boot/dts/xpedite5330.dts create mode 100644 arch/powerpc/boot/dts/xpedite5370.dts create mode 100644 arch/powerpc/boot/dts/yosemite.dts create mode 100644 arch/powerpc/boot/ebony.c create mode 100644 arch/powerpc/boot/elf.h create mode 100644 arch/powerpc/boot/elf_util.c create mode 100644 arch/powerpc/boot/ep8248e.c create mode 100644 arch/powerpc/boot/ep88xc.c create mode 100644 arch/powerpc/boot/epapr-wrapper.c create mode 100644 arch/powerpc/boot/epapr.c create mode 100644 arch/powerpc/boot/fixed-head.S create mode 100644 arch/powerpc/boot/fixup-headers.sed create mode 100644 arch/powerpc/boot/fsl-soc.c create mode 100644 arch/powerpc/boot/fsl-soc.h create mode 100644 arch/powerpc/boot/gamecube-head.S create mode 100644 arch/powerpc/boot/gamecube.c create mode 100644 arch/powerpc/boot/hack-coff.c create mode 100644 arch/powerpc/boot/holly.c create mode 100755 arch/powerpc/boot/install.sh create mode 100644 arch/powerpc/boot/io.h create mode 100644 arch/powerpc/boot/libfdt-wrapper.c create mode 100644 arch/powerpc/boot/libfdt_env.h create mode 100644 arch/powerpc/boot/main.c create mode 100644 arch/powerpc/boot/microwatt.c create mode 100644 arch/powerpc/boot/mktree.c create mode 100644 arch/powerpc/boot/motload-head.S create mode 100644 arch/powerpc/boot/mpc52xx-psc.c create mode 100644 arch/powerpc/boot/mpc8xx.c create mode 100644 arch/powerpc/boot/mpc8xx.h create mode 100644 arch/powerpc/boot/mvme5100.c create mode 100644 arch/powerpc/boot/mvme7100.c create mode 100644 arch/powerpc/boot/ns16550.c create mode 100644 arch/powerpc/boot/of.c create mode 100644 arch/powerpc/boot/of.h create mode 100644 arch/powerpc/boot/ofconsole.c create mode 100644 arch/powerpc/boot/oflib.c create mode 100644 arch/powerpc/boot/opal-calls.S create mode 100644 arch/powerpc/boot/opal.c create mode 100644 arch/powerpc/boot/ops.h create mode 100644 arch/powerpc/boot/page.h create mode 100644 arch/powerpc/boot/planetcore.c create mode 100644 arch/powerpc/boot/planetcore.h create mode 100644 arch/powerpc/boot/ppc_asm.h create mode 100644 arch/powerpc/boot/ppcboot.h create mode 100644 arch/powerpc/boot/pq2.c create mode 100644 arch/powerpc/boot/pq2.h create mode 100644 arch/powerpc/boot/ps3-head.S create mode 100644 arch/powerpc/boot/ps3-hvcall.S create mode 100644 arch/powerpc/boot/ps3.c create mode 100644 arch/powerpc/boot/pseries-head.S create mode 100644 arch/powerpc/boot/redboot-83xx.c create mode 100644 arch/powerpc/boot/redboot-8xx.c create mode 100644 arch/powerpc/boot/redboot.h create mode 100644 arch/powerpc/boot/reg.h create mode 100644 arch/powerpc/boot/rs6000.h create mode 100644 arch/powerpc/boot/serial.c create mode 100644 arch/powerpc/boot/simple_alloc.c create mode 100644 arch/powerpc/boot/simpleboot.c create mode 100644 arch/powerpc/boot/stdbool.h create mode 100644 arch/powerpc/boot/stdint.h create mode 100644 arch/powerpc/boot/stdio.c create mode 100644 arch/powerpc/boot/stdio.h create mode 100644 arch/powerpc/boot/stdlib.c create mode 100644 arch/powerpc/boot/stdlib.h create mode 100644 arch/powerpc/boot/string.S create mode 100644 arch/powerpc/boot/string.h create mode 100644 arch/powerpc/boot/swab.h create mode 100644 arch/powerpc/boot/treeboot-akebono.c create mode 100644 arch/powerpc/boot/treeboot-bamboo.c create mode 100644 arch/powerpc/boot/treeboot-currituck.c create mode 100644 arch/powerpc/boot/treeboot-ebony.c create mode 100644 arch/powerpc/boot/treeboot-iss4xx.c create mode 100644 arch/powerpc/boot/types.h create mode 100644 arch/powerpc/boot/ugecon.c create mode 100644 arch/powerpc/boot/ugecon.h create mode 100644 arch/powerpc/boot/util.S create mode 100644 arch/powerpc/boot/wii-head.S create mode 100644 arch/powerpc/boot/wii.c create mode 100755 arch/powerpc/boot/wrapper create mode 100644 arch/powerpc/boot/xz_config.h create mode 100644 arch/powerpc/boot/zImage.coff.lds.S create mode 100644 arch/powerpc/boot/zImage.lds.S create mode 100644 arch/powerpc/boot/zImage.ps3.lds.S (limited to 'arch/powerpc/boot') diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore new file mode 100644 index 000000000..5a867f23f --- /dev/null +++ b/arch/powerpc/boot/.gitignore @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only +addnote +decompress_inflate.c +empty.c +hack-coff +inffast.c +inffast.h +inffixed.h +inflate.c +inflate.h +inftrees.c +inftrees.h +infutil.c +infutil.h +kernel-vmlinux.strip.c +kernel-vmlinux.strip.gz +mktree +otheros.bld +otheros-too-big.bld +uImage +cuImage.* +dtbImage.* +treeImage.* +vmlinux.strip +zImage +zImage.initrd +zImage.bin.* +zImage.chrp +zImage.coff +zImage.epapr +zImage.holly +zImage.*lds +zImage.miboot +zImage.pmac +zImage.pseries +zconf.h +zlib.h +zutil.h +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_strerror.c +fdt_sw.c +fdt_wip.c +libfdt.h +libfdt_internal.h diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h new file mode 100644 index 000000000..9b15e5952 --- /dev/null +++ b/arch/powerpc/boot/44x.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PowerPC 44x related functions + * + * Copyright 2007 David Gibson, IBM Corporation. + */ +#ifndef _PPC_BOOT_44X_H_ +#define _PPC_BOOT_44X_H_ + +void ebony_init(void *mac0, void *mac1); +void bamboo_init(void *mac0, void *mac1); + +#endif /* _PPC_BOOT_44X_H_ */ diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c new file mode 100644 index 000000000..682ca3827 --- /dev/null +++ b/arch/powerpc/boot/4xx.c @@ -0,0 +1,533 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright (C) 2009 Wind River Systems, Inc. + * Updated for supporting PPC405EX on Kilauea. + * Tiejun Chen + */ +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "dcr.h" + +static unsigned long chip_11_errata(unsigned long memsize) +{ + unsigned long pvr; + + pvr = mfpvr(); + + switch (pvr & 0xf0000ff0) { + case 0x40000850: + case 0x400008d0: + case 0x200008d0: + memsize -= 4096; + break; + default: + break; + } + + return memsize; +} + +/* Read the 4xx SDRAM controller to get size of system memory. */ +void ibm4xx_sdram_fixup_memsize(void) +{ + int i; + unsigned long memsize, bank_config; + + memsize = 0; + for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { + bank_config = SDRAM0_READ(sdram_bxcr[i]); + if (bank_config & SDRAM_CONFIG_BANK_ENABLE) + memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); + } + + memsize = chip_11_errata(memsize); + dt_fixup_memory(0, memsize); +} + +/* Read the 440SPe MQ controller to get size of system memory. */ +#define DCRN_MQ0_B0BAS 0x40 +#define DCRN_MQ0_B1BAS 0x41 +#define DCRN_MQ0_B2BAS 0x42 +#define DCRN_MQ0_B3BAS 0x43 + +static u64 ibm440spe_decode_bas(u32 bas) +{ + u64 base = ((u64)(bas & 0xFFE00000u)) << 2; + + /* open coded because I'm paranoid about invalid values */ + switch ((bas >> 4) & 0xFFF) { + case 0: + return 0; + case 0xffc: + return base + 0x000800000ull; + case 0xff8: + return base + 0x001000000ull; + case 0xff0: + return base + 0x002000000ull; + case 0xfe0: + return base + 0x004000000ull; + case 0xfc0: + return base + 0x008000000ull; + case 0xf80: + return base + 0x010000000ull; + case 0xf00: + return base + 0x020000000ull; + case 0xe00: + return base + 0x040000000ull; + case 0xc00: + return base + 0x080000000ull; + case 0x800: + return base + 0x100000000ull; + } + printf("Memory BAS value 0x%08x unsupported !\n", bas); + return 0; +} + +void ibm440spe_fixup_memsize(void) +{ + u64 banktop, memsize = 0; + + /* Ultimately, we should directly construct the memory node + * so we are able to handle holes in the memory address space + */ + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS)); + if (banktop > memsize) + memsize = banktop; + + dt_fixup_memory(0, memsize); +} + + +/* 4xx DDR1/2 Denali memory controller support */ +/* DDR0 registers */ +#define DDR0_02 2 +#define DDR0_08 8 +#define DDR0_10 10 +#define DDR0_14 14 +#define DDR0_42 42 +#define DDR0_43 43 + +/* DDR0_02 */ +#define DDR_START 0x1 +#define DDR_START_SHIFT 0 +#define DDR_MAX_CS_REG 0x3 +#define DDR_MAX_CS_REG_SHIFT 24 +#define DDR_MAX_COL_REG 0xf +#define DDR_MAX_COL_REG_SHIFT 16 +#define DDR_MAX_ROW_REG 0xf +#define DDR_MAX_ROW_REG_SHIFT 8 +/* DDR0_08 */ +#define DDR_DDR2_MODE 0x1 +#define DDR_DDR2_MODE_SHIFT 0 +/* DDR0_10 */ +#define DDR_CS_MAP 0x3 +#define DDR_CS_MAP_SHIFT 8 +/* DDR0_14 */ +#define DDR_REDUC 0x1 +#define DDR_REDUC_SHIFT 16 +/* DDR0_42 */ +#define DDR_APIN 0x7 +#define DDR_APIN_SHIFT 24 +/* DDR0_43 */ +#define DDR_COL_SZ 0x7 +#define DDR_COL_SZ_SHIFT 8 +#define DDR_BANK8 0x1 +#define DDR_BANK8_SHIFT 0 + +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) + +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) +{ + void *devp; + char model[64]; + u32 val, cs; + + devp = finddevice("/"); + if (!devp) + goto read_cs; + + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: + /* get CS value */ + val = SDRAM0_READ(DDR0_10); + + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); + cs = 0; + while (val) { + if (val & 0x1) + cs++; + val = val >> 1; + } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); + if (!cs) + fatal("No memory installed\n"); + if (cs > max_cs) + fatal("DDR wrong CS configuration\n"); + + /* get data path bytes */ + val = SDRAM0_READ(DDR0_14); + + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) + dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ + + /* get address pins (rows) */ + val = SDRAM0_READ(DDR0_42); + + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); + if (row > max_row) + fatal("DDR wrong APIN configuration\n"); + row = max_row - row; + + /* get collomn size and banks */ + val = SDRAM0_READ(DDR0_43); + + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); + if (col > max_col) + fatal("DDR wrong COL configuration\n"); + col = max_col - col; + + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT)) + bank = 8; /* 8 banks */ + else + bank = 4; /* 4 banks */ + + memsize = cs * (1 << (col+row)) * bank * dpath; + memsize = chip_11_errata(memsize); + dt_fixup_memory(0, memsize); +} + +#define SPRN_DBCR0_44X 0x134 +#define DBCR0_RST_SYSTEM 0x30000000 + +void ibm44x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) + ); + +} + +#define EMAC_RESET 0x20000000 +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) +{ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't + * do this for us + */ + if (emac0) + *emac0 = EMAC_RESET; + if (emac1) + *emac1 = EMAC_RESET; + + mtdcr(DCRN_MAL0_CFG, MAL_RESET); + while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET) + ; /* loop until reset takes effect */ +} + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} + +/* Calculate 440GP clocks */ +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) +{ + u32 sys0 = mfdcr(DCRN_CPC0_SYS0); + u32 cr0 = mfdcr(DCRN_CPC0_CR0); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 opdv = CPC0_SYS0_OPDV(sys0); + u32 epdv = CPC0_SYS0_EPDV(sys0); + + if (sys0 & CPC0_SYS0_BYPASS) { + /* Bypass system PLL */ + cpu = plb = sys_clk; + } else { + if (sys0 & CPC0_SYS0_EXTSL) + /* PerClk */ + m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; + else + /* CPU clock */ + m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); + cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0); + plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0); + } + + opb = plb / opdv; + ebc = opb / epdv; + + /* FIXME: Check if this is for all 440GP, or just Ebony */ + if ((mfpvr() & 0xf0000fff) == 0x40000440) + /* Rev. B 440GP, use external system clock */ + tb = sys_clk; + else + /* Rev. C 440GP, errata force us to use internal clock */ + tb = cpu; + + if (cr0 & CPC0_CR0_U0EC) + /* External UART clock */ + uart0 = ser_clk; + else + /* Internal UART clock */ + uart0 = plb / CPC0_CR0_UDIV(cr0); + + if (cr0 & CPC0_CR0_U1EC) + /* External UART clock */ + uart1 = ser_clk; + else + /* Internal UART clock */ + uart1 = plb / CPC0_CR0_UDIV(cr0); + + printf("PPC440GP: SysClk = %dMHz (%x)\n\r", + (sys_clk + 500000) / 1000000, sys_clk); + + dt_fixup_cpu_clocks(cpu, tb, 0); + + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@40000200", uart0); + dt_fixup_clock("/plb/opb/serial@40000300", uart1); +} + +#define SPRN_CCR1 0x378 + +static inline u32 __fix_zero(u32 v, u32 def) +{ + return v ? v : def; +} + +static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk, + unsigned int tmr_clk, + int per_clk_from_opb) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + + /* Dividers */ + u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); + u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16); + u32 fwdvb = __fix_zero((plld >> 8) & 7, 8); + u32 lfbdv = __fix_zero(plld & 0x3f, 64); + u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8); + u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8); + u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4); + u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4); + + /* Input clocks for primary dividers */ + u32 clk_a, clk_b; + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco; + + /* Timebase */ + u32 ccr1, tb = tmr_clk; + + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv; + break; + case 1: + /* CPU */ + m = fwdva * pradv0; + break; + case 5: + /* PERClk */ + m = fwdvb * prbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + m *= fbdv; + vco = sys_clk * m; + clk_a = vco / fwdva; + clk_b = vco / fwdvb; + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + clk_a = clk_b = sys_clk; + } + + cpu = clk_a / pradv0; + plb = clk_b / prbdv0; + opb = plb / opbdv0; + ebc = (per_clk_from_opb ? opb : plb) / perdv0; + + /* Figure out timebase. Either CPU or default TmrClk */ + ccr1 = mfspr(SPRN_CCR1); + + /* If passed a 0 tmr_clk, force CPU clock */ + if (tb == 0) { + ccr1 &= ~0x80u; + mtspr(SPRN_CCR1, ccr1); + } + if ((ccr1 & 0x0080) == 0) + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + + return plb; +} + +static void eplike_fixup_uart_clk(int index, const char *path, + unsigned int ser_clk, + unsigned int plb_clk) +{ + unsigned int sdr; + unsigned int clock; + + switch (index) { + case 0: + sdr = SDR0_READ(DCRN_SDR0_UART0); + break; + case 1: + sdr = SDR0_READ(DCRN_SDR0_UART1); + break; + case 2: + sdr = SDR0_READ(DCRN_SDR0_UART2); + break; + case 3: + sdr = SDR0_READ(DCRN_SDR0_UART3); + break; + default: + return; + } + + if (sdr & 0x00800000u) + clock = ser_clk; + else + clock = plb_clk / __fix_zero(sdr & 0xff, 256); + + dt_fixup_clock(path, clock); +} + +void ibm440ep_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk); + eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk); +} + +void ibm440gx_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk); +} + +void ibm440spe_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h new file mode 100644 index 000000000..62df496b7 --- /dev/null +++ b/arch/powerpc/boot/4xx.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PowerPC 4xx related functions + * + * Copyright 2007 IBM Corporation. + * Josh Boyer + */ +#ifndef _POWERPC_BOOT_4XX_H_ +#define _POWERPC_BOOT_4XX_H_ + +void ibm4xx_sdram_fixup_memsize(void); +void ibm440spe_fixup_memsize(void); +void ibm4xx_denali_fixup_memsize(void); +void ibm44x_dbcr_reset(void); +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); +void ibm4xx_fixup_ebc_ranges(const char *ebc); + +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); +void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440gx_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440spe_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); + +#endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile new file mode 100644 index 000000000..7ee0fa2d3 --- /dev/null +++ b/arch/powerpc/boot/Makefile @@ -0,0 +1,499 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for making ELF bootable images for booting on CHRP +# using Open Firmware. +# +# Geert Uytterhoeven September 1997 +# +# Based on coffboot by Paul Mackerras +# Simplified for ppc64 by Todd Inglett +# +# NOTE: this code may be built for 32 bit in ELF32 format even though +# it packages a 64 bit kernel. We do this to simplify the +# bootloader and increase compatibility with OpenFirmware. +# +# To this end we need to define BOOTCC, etc, as the tools +# needed to build the 32 bit image. That's normally the same +# compiler for the rest of the kernel, with the -m32 flag added. +# To make it easier to setup a cross compiler, +# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE +# in the toplevel makefile. + +all: $(obj)/zImage + +ifdef CROSS32_COMPILE +ifdef CONFIG_CC_IS_CLANG + BOOTCC := $(CROSS32_COMPILE)clang +else + BOOTCC := $(CROSS32_COMPILE)gcc +endif + BOOTAR := $(CROSS32_COMPILE)ar +else + BOOTCC := $(CC) + BOOTAR := $(AR) +endif + +ifdef CONFIG_PPC64_BOOT_WRAPPER +BOOTTARGETFLAGS += -m64 +BOOTTARGETFLAGS += -mabi=elfv2 +ifdef CONFIG_PPC64_ELF_ABI_V2 +BOOTTARGETFLAGS += $(call cc-option,-mabi=elfv2) +endif +else +BOOTTARGETFLAGS := -m32 +endif + +ifdef CONFIG_TARGET_CPU_BOOL +BOOTTARGETFLAGS += -mcpu=$(CONFIG_TARGET_CPU) +else ifdef CONFIG_PPC64_BOOT_WRAPPER +ifdef CONFIG_CPU_LITTLE_ENDIAN +BOOTTARGETFLAGS += -mcpu=powerpc64le +else +BOOTTARGETFLAGS += -mcpu=powerpc64 +endif +endif + +$(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405 + +ifdef CONFIG_CPU_BIG_ENDIAN +BOOTTARGETFLAGS += -mbig-endian +else +BOOTTARGETFLAGS += -mlittle-endian +endif + +BOOTCPPFLAGS := -nostdinc $(LINUXINCLUDE) +BOOTCPPFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) + +BOOTCFLAGS := $(BOOTTARGETFLAGS) \ + $(CC_FLAGS_DIALECT) \ + -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -O2 \ + -msoft-float -mno-altivec -mno-vsx \ + $(call cc-option,-mno-prefixed) \ + $(call cc-option,-mno-pcrel) \ + $(call cc-option,-mno-mma) \ + $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ + -fomit-frame-pointer -fno-builtin -fPIC + +BOOTAFLAGS := $(BOOTTARGETFLAGS) -D__ASSEMBLY__ + +BOOTARFLAGS := -crD + +ifdef CONFIG_CC_IS_CLANG +BOOTCFLAGS += $(CLANG_FLAGS) +BOOTAFLAGS += $(CLANG_FLAGS) +endif + +ifdef CONFIG_DEBUG_INFO +BOOTCFLAGS += -g +endif + +ifeq ($(call cc-option-yn, -fstack-protector),y) +BOOTCFLAGS += -fno-stack-protector +endif + +BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h +BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) + +DTC_FLAGS ?= -p 1024 + +# The pre-boot decompressors pull in a lot of kernel headers and other source +# files. This creates a bit of a dependency headache since we need to copy +# these files into the build dir, fix up any includes and ensure that dependent +# files are copied in the right order. + +# these need to be separate variables because they are copied out of different +# directories in the kernel tree. Sure you COULD merge them, but it's a +# cure-is-worse-than-disease situation. +zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c +zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c +zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h +zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h + +$(addprefix $(obj)/, decompress.o): \ + $(addprefix $(obj)/,$(zlib-decomp-y)) + +$(addprefix $(obj)/, $(zlib-decomp-y)): \ + $(addprefix $(obj)/,$(zliblinuxheader-y)) \ + $(addprefix $(obj)/,$(zlibheader-y)) \ + $(addprefix $(obj)/,$(zlib-y)) + +$(addprefix $(obj)/,$(zlib-y)): \ + $(addprefix $(obj)/,$(zliblinuxheader-y)) \ + $(addprefix $(obj)/,$(zlibheader-y)) + +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ + treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + +src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ + $(libfdt) libfdt-wrapper.c \ + ns16550.c serial.c simple_alloc.c div64.S util.S \ + elf_util.c $(zlib-y) devtree.c stdlib.c \ + oflib.c ofconsole.c cuboot.c + +src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c +src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c +ifndef CONFIG_PPC64_BOOT_WRAPPER +src-wlib-y += crtsavres.S +endif +src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c +src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c +src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c +src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c +src-wlib-$(CONFIG_CPM) += cpm-serial.c + +src-plat-y := of.c epapr.c +src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ + cuboot-bamboo.c cuboot-sam440ep.c \ + cuboot-sequoia.c cuboot-rainier.c \ + cuboot-taishan.c cuboot-katmai.c \ + cuboot-warp.c cuboot-yosemite.c \ + treeboot-iss4xx.c treeboot-currituck.c \ + treeboot-akebono.c \ + simpleboot.c fixed-head.S +src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c +src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c +src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c +src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c +src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c +src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c \ + gamecube-head.S gamecube.c \ + wii-head.S wii.c holly.c \ + fixed-head.S mvme5100.c +src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c +src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c +src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c +src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S +src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S +src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c + +src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c + +src-wlib := $(sort $(src-wlib-y)) +src-plat := $(sort $(src-plat-y)) +src-boot := $(src-wlib) $(src-plat) empty.c + +src-boot := $(addprefix $(obj)/, $(src-boot)) +obj-boot := $(addsuffix .o, $(basename $(src-boot))) +obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) +obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) +obj-plat: $(libfdt) + +quiet_cmd_copy_kern_src = COPY $@ + cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ + +$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% + $(call cmd,copy_kern_src) + +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + +$(obj)/empty.c: + $(Q)touch $@ + +$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S + $(Q)cp $< $@ + +clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ + $(zlib-decomp-) $(libfdt) $(libfdtheader) \ + empty.c zImage.coff.lds zImage.ps3.lds zImage.lds + +quiet_cmd_bootcc = BOOTCC $@ + cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTCFLAGS) -c -o $@ $< + +quiet_cmd_bootas = BOOTAS $@ + cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTAFLAGS) -c -o $@ $< + +quiet_cmd_bootar = BOOTAR $@ + cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ + +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) +$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,bootcc) +$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,bootas) + +$(obj)/wrapper.a: $(obj-wlib) FORCE + $(call if_changed,bootar) + +hostprogs := addnote hack-coff mktree + +targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds +always-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ + $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds + +dtstree := $(src)/dts + +wrapper := $(src)/wrapper +wrapperbits := $(always-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ + $(wrapper) FORCE + +############# +# Bits for building various flavours of zImage + +ifneq ($(CROSS32_COMPILE),) +CROSSWRAP := -C "$(CROSS32_COMPILE)" +else +ifneq ($(CROSS_COMPILE),) +CROSSWRAP := -C "$(CROSS_COMPILE)" +endif +endif + +compressor-$(CONFIG_KERNEL_GZIP) := gz +compressor-$(CONFIG_KERNEL_XZ) := xz +compressor-$(CONFIG_KERNEL_LZMA) := lzma +compressor-$(CONFIG_KERNEL_LZO) := lzo + +# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd +quiet_cmd_wrap = WRAP $@ + cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ + $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ + vmlinux + +image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_POWERNV) += zImage.pseries +image-$(CONFIG_PPC_PS3) += dtbImage.ps3 +image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_EFIKA) += zImage.chrp +image-$(CONFIG_PPC_PMAC) += zImage.pmac +image-$(CONFIG_PPC_HOLLY) += dtbImage.holly +image-$(CONFIG_DEFAULT_UIMAGE) += uImage +image-$(CONFIG_EPAPR_BOOT) += zImage.epapr + +# +# Targets which embed a device tree blob +# +# Theses are default targets to build images which embed device tree blobs. +# They are only required on boards which do not have FDT support in firmware. +# Boards with newish u-boot firmware can use the uImage target above +# + +# Board ports in arch/powerpc/platform/44x/Kconfig +image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo +image-$(CONFIG_SAM440EP) += cuImage.sam440ep +image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_RAINIER) += cuImage.rainier +image-$(CONFIG_TAISHAN) += cuImage.taishan +image-$(CONFIG_KATMAI) += cuImage.katmai +image-$(CONFIG_WARP) += cuImage.warp +image-$(CONFIG_YOSEMITE) += cuImage.yosemite +image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ + treeImage.iss4xx-mpic +image-$(CONFIG_CURRITUCK) += treeImage.currituck +image-$(CONFIG_AKEBONO) += treeImage.akebono + +# Board ports in arch/powerpc/platform/8xx/Kconfig +image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc +image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ + dtbImage.adder875-redboot + +# Board ports in arch/powerpc/platform/52xx/Kconfig +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b +image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 + +# Board ports in arch/powerpc/platform/82xx/Kconfig +image-$(CONFIG_EP8248E) += dtbImage.ep8248e + +# Board ports in arch/powerpc/platform/83xx/Kconfig +image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb +image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ + cuImage.mpc8349emitxgp +image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot + +# Board ports in arch/powerpc/platform/85xx/Kconfig +image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds +image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ + cuImage.mpc8572ds +image-$(CONFIG_TQM8540) += cuImage.tqm8540 +image-$(CONFIG_TQM8541) += cuImage.tqm8541 +image-$(CONFIG_TQM8548) += cuImage.tqm8548 +image-$(CONFIG_TQM8555) += cuImage.tqm8555 +image-$(CONFIG_TQM8560) += cuImage.tqm8560 +image-$(CONFIG_KSI8560) += cuImage.ksi8560 + +# Board ports in arch/powerpc/platform/86xx/Kconfig +image-$(CONFIG_MVME7100) += dtbImage.mvme7100 + +# Board ports in arch/powerpc/platform/embedded6xx/Kconfig +image-$(CONFIG_STORCENTER) += cuImage.storcenter +image-$(CONFIG_GAMECUBE) += dtbImage.gamecube +image-$(CONFIG_WII) += dtbImage.wii +image-$(CONFIG_MVME5100) += dtbImage.mvme5100 + +# Board port in arch/powerpc/platform/amigaone/Kconfig +image-$(CONFIG_AMIGAONE) += cuImage.amigaone + +image-$(CONFIG_PPC_MICROWATT) += dtbImage.microwatt + +# For 32-bit powermacs, build the COFF and miboot images +# as well as the ELF images. +ifdef CONFIG_PPC32 +image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot +endif + +# Allow extra targets to be added to the defconfig +image-y += $(CONFIG_EXTRA_TARGETS) + +initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) +initrd-y := $(patsubst zImage%, zImage.initrd%, \ + $(patsubst dtbImage%, dtbImage.initrd%, \ + $(patsubst simpleImage%, simpleImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) +initrd-y := $(filter-out $(image-y), $(initrd-y)) +targets += $(image-y) $(initrd-y) +targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ + $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) +targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ + $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) + +$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz + +# Don't put the ramdisk on the pattern rule; when its missing make will try +# the pattern rule with less dependencies that also matches (even with the +# hard dependency listed). +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) + +$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) + +# dtbImage% - a dtbImage is a zImage with an embedded device tree blob +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) + +# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) +# prefix +$(obj)/vmlinux.strip: vmlinux + $(STRIP) -s -R .comment $< -o $@ + +$(obj)/uImage: vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,uboot) + +$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) + +# Needed for the above targets to work with dts/fsl/ files +$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb + @cp $< $@ + +# If there isn't a platform selected then just strip the vmlinux. +ifeq (,$(image-y)) +image-y := vmlinux.strip +endif + +$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) + $(Q)rm -f $@; ln $< $@ +$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) + $(Q)rm -f $@; ln $< $@ + +# anything not in $(targets) +clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ + zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ + zImage.miboot zImage.pmac zImage.pseries \ + simpleImage.* otheros.bld + +# clean up files cached by wrapper +clean-kernel-base := vmlinux.strip vmlinux.bin +clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) +clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) +# clean-files are relative to $(obj). +clean-files += $(addprefix ../../../, $(clean-kernel)) + +WRAPPER_OBJDIR := /usr/lib/kernel-wrapper +WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts +WRAPPER_BINDIR := /usr/sbin +INSTALL := install + +extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(always-y)) +hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) +wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper +dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) + +all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) + +quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_mkdir = mkdir -p $@ + +quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) + cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) + cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ + +quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ + sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ + -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ + + +$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): + $(call cmd,mkdir) + +$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) + $(call cmd,install) + +$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_exe) + +$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) + $(call cmd,install_dts) + +$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_wrapper) + +$(obj)/bootwrapper_install: $(all-installed) diff --git a/arch/powerpc/boot/README b/arch/powerpc/boot/README new file mode 100644 index 000000000..3e1105876 --- /dev/null +++ b/arch/powerpc/boot/README @@ -0,0 +1,11 @@ + +To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary: + +objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz +objcopy -j .kernel:System.map -O binary zImage System.map.gz +objcopy -j .kernel:.config -O binary zImage config.gz +objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz + + + Peter + diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c new file mode 100644 index 000000000..787049274 --- /dev/null +++ b/arch/powerpc/boot/addnote.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Program to hack in a PT_NOTE program header entry in an ELF file. + * This is needed for OF on RS/6000s to load an image correctly. + * Note that OF needs a program header entry for the note, not an + * ELF section. + * + * Copyright 2000 Paul Mackerras. + * + * Adapted for 64 bit little endian images by Andrew Tauferner. + * + * Usage: addnote zImage + */ +#include +#include +#include +#include +#include + +/* CHRP note section */ +static const char arch[] = "PowerPC"; + +#define N_DESCR 6 +unsigned int descr[N_DESCR] = { + 0xffffffff, /* real-mode = true */ + 0x02000000, /* real-base, i.e. where we expect OF to be */ + 0xffffffff, /* real-size */ + 0xffffffff, /* virt-base */ + 0xffffffff, /* virt-size */ + 0x4000, /* load-base */ +}; + +/* RPA note section */ +static const char rpaname[] = "IBM,RPA-Client-Config"; + +/* + * Note: setting ignore_my_client_config *should* mean that OF ignores + * all the other fields, but there is a firmware bug which means that + * it looks at the splpar field at least. So these values need to be + * reasonable. + */ +#define N_RPA_DESCR 8 +unsigned int rpanote[N_RPA_DESCR] = { + 0, /* lparaffinity */ + 64, /* min_rmo_size */ + 0, /* min_rmo_percent */ + 40, /* max_pft_size */ + 1, /* splpar */ + -1, /* min_load */ + 0, /* new_mem_def */ + 1, /* ignore_my_client_config */ +}; + +#define ROUNDUP(len) (((len) + 3) & ~3) + +unsigned char buf[1024]; +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 +static int e_data = ELFDATA2MSB; +#define ELFCLASS32 1 +#define ELFCLASS64 2 +static int e_class = ELFCLASS32; + +#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) +#define GET_32BE(off) ((GET_16BE(off) << 16U) + GET_16BE((off)+2U)) +#define GET_64BE(off) ((((unsigned long long)GET_32BE(off)) << 32ULL) + \ + ((unsigned long long)GET_32BE((off)+4ULL))) +#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \ + buf[(off) + 1] = (v) & 0xff) +#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v))) +#define PUT_64BE(off, v)((PUT_32BE((off), (unsigned long long)(v) >> 32L), \ + PUT_32BE((off) + 4, (unsigned long long)(v)))) + +#define GET_16LE(off) ((buf[off]) + (buf[(off)+1] << 8)) +#define GET_32LE(off) (GET_16LE(off) + (GET_16LE((off)+2U) << 16U)) +#define GET_64LE(off) ((unsigned long long)GET_32LE(off) + \ + (((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL)) +#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \ + buf[(off) + 1] = ((v) >> 8) & 0xff) +#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L)) +#define PUT_64LE(off, v) (PUT_32LE((off), (unsigned long long)(v)), \ + PUT_32LE((off) + 4, (unsigned long long)(v) >> 32L)) + +#define GET_16(off) (e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off)) +#define GET_32(off) (e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off)) +#define GET_64(off) (e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off)) +#define PUT_16(off, v) (e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \ + PUT_16LE(off, v)) +#define PUT_32(off, v) (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \ + PUT_32LE(off, v)) +#define PUT_64(off, v) (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \ + PUT_64LE(off, v)) + +/* Structure of an ELF file */ +#define E_IDENT 0 /* ELF header */ +#define E_PHOFF (e_class == ELFCLASS32 ? 28 : 32) +#define E_PHENTSIZE (e_class == ELFCLASS32 ? 42 : 54) +#define E_PHNUM (e_class == ELFCLASS32 ? 44 : 56) +#define E_HSIZE (e_class == ELFCLASS32 ? 52 : 64) + +#define EI_MAGIC 0 /* offsets in E_IDENT area */ +#define EI_CLASS 4 +#define EI_DATA 5 + +#define PH_TYPE 0 /* ELF program header */ +#define PH_OFFSET (e_class == ELFCLASS32 ? 4 : 8) +#define PH_FILESZ (e_class == ELFCLASS32 ? 16 : 32) +#define PH_HSIZE (e_class == ELFCLASS32 ? 32 : 56) + +#define PT_NOTE 4 /* Program header type = note */ + + +unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; + +int +main(int ac, char **av) +{ + int fd, n, i; + unsigned long ph, ps, np; + long nnote, nnote2, ns; + + if (ac != 2) { + fprintf(stderr, "Usage: %s elf-file\n", av[0]); + exit(1); + } + fd = open(av[1], O_RDWR); + if (fd < 0) { + perror(av[1]); + exit(1); + } + + nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); + nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); + + n = read(fd, buf, sizeof(buf)); + if (n < 0) { + perror("read"); + exit(1); + } + + if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) + goto notelf; + e_class = buf[E_IDENT+EI_CLASS]; + if (e_class != ELFCLASS32 && e_class != ELFCLASS64) + goto notelf; + e_data = buf[E_IDENT+EI_DATA]; + if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB) + goto notelf; + if (n < E_HSIZE) + goto notelf; + + ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF)); + ps = GET_16(E_PHENTSIZE); + np = GET_16(E_PHNUM); + if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) + goto notelf; + if (ph + (np + 2) * ps + nnote + nnote2 > n) + goto nospace; + + for (i = 0; i < np; ++i) { + if (GET_32(ph + PH_TYPE) == PT_NOTE) { + fprintf(stderr, "%s already has a note entry\n", + av[1]); + exit(0); + } + ph += ps; + } + + /* XXX check that the area we want to use is all zeroes */ + for (i = 0; i < 2 * ps + nnote + nnote2; ++i) + if (buf[ph + i] != 0) + goto nospace; + + /* fill in the program header entry */ + ns = ph + 2 * ps; + PUT_32(ph + PH_TYPE, PT_NOTE); + if (e_class == ELFCLASS32) + PUT_32(ph + PH_OFFSET, ns); + else + PUT_64(ph + PH_OFFSET, ns); + + if (e_class == ELFCLASS32) + PUT_32(ph + PH_FILESZ, nnote); + else + PUT_64(ph + PH_FILESZ, nnote); + + /* fill in the note area we point to */ + /* XXX we should probably make this a proper section */ + PUT_32(ns, strlen(arch) + 1); + PUT_32(ns + 4, N_DESCR * 4); + PUT_32(ns + 8, 0x1275); + strcpy((char *) &buf[ns + 12], arch); + ns += 12 + strlen(arch) + 1; + for (i = 0; i < N_DESCR; ++i, ns += 4) + PUT_32BE(ns, descr[i]); + + /* fill in the second program header entry and the RPA note area */ + ph += ps; + PUT_32(ph + PH_TYPE, PT_NOTE); + if (e_class == ELFCLASS32) + PUT_32(ph + PH_OFFSET, ns); + else + PUT_64(ph + PH_OFFSET, ns); + + if (e_class == ELFCLASS32) + PUT_32(ph + PH_FILESZ, nnote); + else + PUT_64(ph + PH_FILESZ, nnote2); + + /* fill in the note area we point to */ + PUT_32(ns, strlen(rpaname) + 1); + PUT_32(ns + 4, sizeof(rpanote)); + PUT_32(ns + 8, 0x12759999); + strcpy((char *) &buf[ns + 12], rpaname); + ns += 12 + ROUNDUP(strlen(rpaname) + 1); + for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) + PUT_32BE(ns, rpanote[i]); + + /* Update the number of program headers */ + PUT_16(E_PHNUM, np + 2); + + /* write back */ + i = lseek(fd, (long) 0, SEEK_SET); + if (i < 0) { + perror("lseek"); + exit(1); + } + i = write(fd, buf, n); + if (i < 0) { + perror("write"); + exit(1); + } + if (i < n) { + fprintf(stderr, "%s: write truncated\n", av[1]); + exit(1); + } + + exit(0); + + notelf: + fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]); + exit(1); + + nospace: + fprintf(stderr, "sorry, I can't find space in %s to put the note\n", + av[1]); + exit(1); +} diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c new file mode 100644 index 000000000..dcdfa586a --- /dev/null +++ b/arch/powerpc/boot/bamboo.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * Clocking code based on code by: + * Stefan Roese + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" + +static u8 *bamboo_mac0, *bamboo_mac1; + +static void bamboo_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0); + dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1); +} + +void bamboo_init(void *mac0, void *mac1) +{ + platform_ops.fixups = bamboo_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + bamboo_mac0 = mac0; + bamboo_mac1 = mac1; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c new file mode 100644 index 000000000..dfb56829c --- /dev/null +++ b/arch/powerpc/boot/cpm-serial.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CPM serial console support. + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" +#include "page.h" + +struct cpm_scc { + u32 gsmrl; + u32 gsmrh; + u16 psmr; + u8 res1[2]; + u16 todr; + u16 dsr; + u16 scce; + u8 res2[2]; + u16 sccm; + u8 res3; + u8 sccs; + u8 res4[8]; +}; + +struct cpm_smc { + u8 res1[2]; + u16 smcmr; + u8 res2[2]; + u8 smce; + u8 res3[3]; + u8 smcm; + u8 res4[5]; +}; + +struct cpm_param { + u16 rbase; + u16 tbase; + u8 rfcr; + u8 tfcr; + u16 mrblr; + u32 rstate; + u8 res1[4]; + u16 rbptr; + u8 res2[6]; + u32 tstate; + u8 res3[4]; + u16 tbptr; + u8 res4[6]; + u16 maxidl; + u16 idlc; + u16 brkln; + u16 brkec; + u16 brkcr; + u16 rmask; + u8 res5[4]; +}; + +struct cpm_bd { + u16 sc; /* Status and Control */ + u16 len; /* Data length in buffer */ + u8 *addr; /* Buffer address in host memory */ +}; + +static void *cpcr; +static struct cpm_param *param; +static struct cpm_smc *smc; +static struct cpm_scc *scc; +static struct cpm_bd *tbdf, *rbdf; +static u32 cpm_cmd; +static void *cbd_addr; +static u32 cbd_offset; + +static void (*do_cmd)(int op); +static void (*enable_port)(void); +static void (*disable_port)(void); + +#define CPM_CMD_STOP_TX 4 +#define CPM_CMD_RESTART_TX 6 +#define CPM_CMD_INIT_RX_TX 0 + +static void cpm1_cmd(int op) +{ + while (in_be16(cpcr) & 1) + ; + + out_be16(cpcr, (op << 8) | cpm_cmd | 1); + + while (in_be16(cpcr) & 1) + ; +} + +static void cpm2_cmd(int op) +{ + while (in_be32(cpcr) & 0x10000) + ; + + out_be32(cpcr, op | cpm_cmd | 0x10000); + + while (in_be32(cpcr) & 0x10000) + ; +} + +static void smc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3); +} + +static void scc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30); +} + +static void smc_enable_port(void) +{ + out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3); + do_cmd(CPM_CMD_RESTART_TX); +} + +static void scc_enable_port(void) +{ + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30); + do_cmd(CPM_CMD_RESTART_TX); +} + +static int cpm_serial_open(void) +{ + disable_port(); + + out_8(¶m->rfcr, 0x10); + out_8(¶m->tfcr, 0x10); + out_be16(¶m->mrblr, 1); + out_be16(¶m->maxidl, 0); + out_be16(¶m->brkec, 0); + out_be16(¶m->brkln, 0); + out_be16(¶m->brkcr, 0); + + rbdf = cbd_addr; + rbdf->addr = (u8 *)rbdf - 1; + rbdf->sc = 0xa000; + rbdf->len = 1; + + tbdf = rbdf + 1; + tbdf->addr = (u8 *)rbdf - 2; + tbdf->sc = 0x2000; + tbdf->len = 1; + + sync(); + out_be16(¶m->rbase, cbd_offset); + out_be16(¶m->tbase, cbd_offset + sizeof(struct cpm_bd)); + + do_cmd(CPM_CMD_INIT_RX_TX); + + enable_port(); + return 0; +} + +static void cpm_serial_putc(unsigned char c) +{ + while (tbdf->sc & 0x8000) + barrier(); + + sync(); + + tbdf->addr[0] = c; + eieio(); + tbdf->sc |= 0x8000; +} + +static unsigned char cpm_serial_tstc(void) +{ + barrier(); + return !(rbdf->sc & 0x8000); +} + +static unsigned char cpm_serial_getc(void) +{ + unsigned char c; + + while (!cpm_serial_tstc()) + ; + + sync(); + c = rbdf->addr[0]; + eieio(); + rbdf->sc |= 0x8000; + + return c; +} + +int cpm_console_init(void *devp, struct serial_console_data *scdp) +{ + void *vreg[2]; + u32 reg[2]; + int is_smc = 0, is_cpm2 = 0; + void *parent, *muram; + void *muram_addr; + unsigned long muram_offset, muram_size; + + if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { + is_smc = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) { + is_cpm2 = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) { + is_cpm2 = 1; + is_smc = 1; + } + + if (is_smc) { + enable_port = smc_enable_port; + disable_port = smc_disable_port; + } else { + enable_port = scc_enable_port; + disable_port = scc_disable_port; + } + + if (is_cpm2) + do_cmd = cpm2_cmd; + else + do_cmd = cpm1_cmd; + + if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4) + return -1; + + if (dt_get_virtual_reg(devp, vreg, 2) < 2) + return -1; + + if (is_smc) + smc = vreg[0]; + else + scc = vreg[0]; + + param = vreg[1]; + + parent = get_parent(devp); + if (!parent) + return -1; + + if (dt_get_virtual_reg(parent, &cpcr, 1) < 1) + return -1; + + muram = finddevice("/soc/cpm/muram/data"); + if (!muram) + return -1; + + /* For bootwrapper-compatible device trees, we assume that the first + * entry has at least 128 bytes, and that #address-cells/#data-cells + * is one for both parent and child. + */ + + if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1) + return -1; + + if (getprop(muram, "reg", reg, 8) < 8) + return -1; + + muram_offset = reg[0]; + muram_size = reg[1]; + + /* Store the buffer descriptors at the end of the first muram chunk. + * For SMC ports on CPM2-based platforms, relocate the parameter RAM + * just before the buffer descriptors. + */ + + cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd); + + if (is_cpm2 && is_smc) { + u16 *smc_base = (u16 *)param; + u16 pram_offset; + + pram_offset = cbd_offset - 64; + pram_offset = _ALIGN_DOWN(pram_offset, 64); + + disable_port(); + out_be16(smc_base, pram_offset); + param = muram_addr - muram_offset + pram_offset; + } + + cbd_addr = muram_addr - muram_offset + cbd_offset; + + scdp->open = cpm_serial_open; + scdp->putc = cpm_serial_putc; + scdp->getc = cpm_serial_getc; + scdp->tstc = cpm_serial_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S new file mode 100644 index 000000000..121cab9d5 --- /dev/null +++ b/arch/powerpc/boot/crt0.S @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) Paul Mackerras 1997. + * + * Adapted for 64 bit LE PowerPC by Andrew Tauferner + */ + +#include "ppc_asm.h" + +RELA = 7 +RELASZ = 8 +RELAENT = 9 + + .data + /* A procedure descriptor used when booting this as a COFF file. + * When making COFF, this comes first in the link and we're + * linked at 0x500000. + */ + .globl _zimage_start_opd +_zimage_start_opd: + .long 0x500000, 0, 0, 0 + .text + b _zimage_start + +#ifdef __powerpc64__ +.balign 8 +p_start: .8byte _start +p_etext: .8byte _etext +p_bss_start: .8byte __bss_start +p_end: .8byte _end + +p_toc: .8byte .TOC. - p_base +p_dyn: .8byte __dynamic_start - p_base +p_rela: .8byte __rela_dyn_start - p_base +p_prom: .8byte 0 + .weak _platform_stack_top +p_pstack: .8byte _platform_stack_top +#else +p_start: .long _start +p_etext: .long _etext +p_bss_start: .long __bss_start +p_end: .long _end + + .weak _platform_stack_top +p_pstack: .long _platform_stack_top +#endif + + .weak _zimage_start +_zimage_start: + .globl _zimage_start_lib +_zimage_start_lib: + /* Work out the offset between the address we were linked at + and the address where we're running. */ + bcl 20,31,.+4 +p_base: mflr r10 /* r10 now points to runtime addr of p_base */ +#ifndef __powerpc64__ + /* grab the link address of the dynamic section in r11 */ + addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha + lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11) + cmpwi r11,0 + beq 3f /* if not linked -pie */ + /* get the runtime address of the dynamic section in r12 */ + .weak __dynamic_start + addis r12,r10,(__dynamic_start-p_base)@ha + addi r12,r12,(__dynamic_start-p_base)@l + subf r11,r11,r12 /* runtime - linktime offset */ + + /* The dynamic section contains a series of tagged entries. + * We need the RELA and RELACOUNT entries. */ + li r9,0 + li r0,0 +9: lwz r8,0(r12) /* get tag */ + cmpwi r8,0 + beq 10f /* end of list */ + cmpwi r8,RELA + bne 11f + lwz r9,4(r12) /* get RELA pointer in r9 */ + b 12f +11: cmpwi r8,RELASZ + bne .Lcheck_for_relaent + lwz r0,4(r12) /* get RELASZ value in r0 */ + b 12f +.Lcheck_for_relaent: + cmpwi r8,RELAENT + bne 12f + lwz r14,4(r12) /* get RELAENT value in r14 */ +12: addi r12,r12,8 + b 9b + + /* The relocation section contains a list of relocations. + * We now do the R_PPC_RELATIVE ones, which point to words + * which need to be initialized with addend + offset */ +10: /* skip relocation if we don't have both */ + cmpwi r0,0 + beq 3f + cmpwi r9,0 + beq 3f + cmpwi r14,0 + beq 3f + + add r9,r9,r11 /* Relocate RELA pointer */ + divwu r0,r0,r14 /* RELASZ / RELAENT */ + mtctr r0 +2: lbz r0,4+3(r9) /* ELF32_R_INFO(reloc->r_info) */ + cmpwi r0,22 /* R_PPC_RELATIVE */ + bne .Lnext + lwz r12,0(r9) /* reloc->r_offset */ + lwz r0,8(r9) /* reloc->r_addend */ + add r0,r0,r11 + stwx r0,r11,r12 +.Lnext: add r9,r9,r14 + bdnz 2b + + /* Do a cache flush for our text, in case the loader didn't */ +3: lwz r9,p_start-p_base(r10) /* note: these are relocated now */ + lwz r8,p_etext-p_base(r10) +4: dcbf r0,r9 + icbi r0,r9 + addi r9,r9,0x20 + cmplw cr0,r9,r8 + blt 4b + sync + isync + + /* Clear the BSS */ + lwz r9,p_bss_start-p_base(r10) + lwz r8,p_end-p_base(r10) + li r0,0 +5: stw r0,0(r9) + addi r9,r9,4 + cmplw cr0,r9,r8 + blt 5b + + /* Possibly set up a custom stack */ + lwz r8,p_pstack-p_base(r10) + cmpwi r8,0 + beq 6f + lwz r1,0(r8) + li r0,0 + stwu r0,-16(r1) /* establish a stack frame */ +6: +#else /* __powerpc64__ */ + /* Save the prom pointer at p_prom. */ + std r5,(p_prom-p_base)(r10) + + /* Set r2 to the TOC. */ + ld r2,(p_toc-p_base)(r10) + add r2,r2,r10 + + /* Grab the link address of the dynamic section in r11. */ + ld r11,-32768(r2) + cmpwi r11,0 + beq 3f /* if not linked -pie then no dynamic section */ + + ld r11,(p_dyn-p_base)(r10) + add r11,r11,r10 + ld r9,(p_rela-p_base)(r10) + add r9,r9,r10 + + li r13,0 + li r8,0 +9: ld r12,0(r11) /* get tag */ + cmpdi r12,0 + beq 12f /* end of list */ + cmpdi r12,RELA + bne 10f + ld r13,8(r11) /* get RELA pointer in r13 */ + b 11f +10: cmpwi r12,RELASZ + bne .Lcheck_for_relaent + lwz r8,8(r11) /* get RELASZ pointer in r8 */ + b 11f +.Lcheck_for_relaent: + cmpwi r12,RELAENT + bne 11f + lwz r14,8(r11) /* get RELAENT pointer in r14 */ +11: addi r11,r11,16 + b 9b +12: + cmpdi r13,0 /* check we have both RELA, RELASZ, RELAENT*/ + cmpdi cr1,r8,0 + beq 3f + beq cr1,3f + cmpdi r14,0 + beq 3f + + /* Calcuate the runtime offset. */ + subf r13,r13,r9 + + /* Run through the list of relocations and process the + * R_PPC64_RELATIVE ones. */ + divdu r8,r8,r14 /* RELASZ / RELAENT */ + mtctr r8 +13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */ + cmpdi r0,22 /* R_PPC64_RELATIVE */ + bne .Lnext + ld r12,0(r9) /* reloc->r_offset */ + ld r0,16(r9) /* reloc->r_addend */ + add r0,r0,r13 + stdx r0,r13,r12 +.Lnext: add r9,r9,r14 + bdnz 13b + + /* Do a cache flush for our text, in case the loader didn't */ +3: ld r9,p_start-p_base(r10) /* note: these are relocated now */ + ld r8,p_etext-p_base(r10) +4: dcbf r0,r9 + icbi r0,r9 + addi r9,r9,0x20 + cmpld cr0,r9,r8 + blt 4b + sync + isync + + /* Clear the BSS */ + ld r9,p_bss_start-p_base(r10) + ld r8,p_end-p_base(r10) + li r0,0 +5: std r0,0(r9) + addi r9,r9,8 + cmpld cr0,r9,r8 + blt 5b + + /* Possibly set up a custom stack */ + ld r8,p_pstack-p_base(r10) + cmpdi r8,0 + beq 6f + ld r1,0(r8) + li r0,0 + stdu r0,-112(r1) /* establish a stack frame */ +6: +#endif /* __powerpc64__ */ + /* Call platform_init() */ + bl platform_init + + /* Call start */ + b start + +#ifdef __powerpc64__ + +#define PROM_FRAME_SIZE 512 + +.macro OP_REGS op, width, start, end, base, offset + .Lreg=\start + .rept (\end - \start + 1) + \op .Lreg,\offset+\width*.Lreg(\base) + .Lreg=.Lreg+1 + .endr +.endm + +#define SAVE_GPRS(start, end, base) OP_REGS std, 8, start, end, base, 0 +#define REST_GPRS(start, end, base) OP_REGS ld, 8, start, end, base, 0 +#define SAVE_GPR(n, base) SAVE_GPRS(n, n, base) +#define REST_GPR(n, base) REST_GPRS(n, n, base) + +/* prom handles the jump into and return from firmware. The prom args pointer + is loaded in r3. */ +.globl prom +prom: + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + SAVE_GPR(2, r1) + SAVE_GPRS(13, 31, r1) + mfcr r10 + std r10,8*32(r1) + mfmsr r10 + std r10,8*33(r1) + + /* remove MSR_LE from msr but keep MSR_SF */ + mfmsr r10 + rldicr r10,r10,0,62 + mtsrr1 r10 + + /* Load FW address, set LR to label 1, and jump to FW */ + bcl 20,31,0f +0: mflr r10 + addi r11,r10,(1f-0b) + mtlr r11 + + ld r10,(p_prom-0b)(r10) + mtsrr0 r10 + + rfid + +1: /* Return from OF */ + FIXUP_ENDIAN + + /* Restore registers and return. */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r10,8*(33)(r1) + mtmsr r10 + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPRS(13, 31, r1) + ld r10,8*32(r1) + mtcr r10 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr +#endif diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S new file mode 100644 index 000000000..085fb2b9a --- /dev/null +++ b/arch/powerpc/boot/crtsavres.S @@ -0,0 +1,233 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + +#ifdef __powerpc64__ +#error "On PPC64, FPR save/restore functions are provided by the linker." +#endif + + .file "crtsavres.S" + .section ".text" + +#define _GLOBAL(name) \ + .type name,@function; \ + .globl name; \ +name: + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c new file mode 100644 index 000000000..b332056f2 --- /dev/null +++ b/arch/powerpc/boot/cuboot-52xx.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for MPC5200 + * + * Author: Grant Likely + * + * Copyright (c) 2007 Secret Lab Technologies Ltd. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "io.h" +#include "cuboot.h" + +#define TARGET_PPC_MPC52xx +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *soc, *reg; + int div; + u32 sysfreq; + + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (!soc) + soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr"); + if (!soc) + soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr"); + if (soc) { + setprop(soc, "bus-frequency", &bd.bi_ipbfreq, + sizeof(bd.bi_ipbfreq)); + + if (!dt_xlate_reg(soc, 0, (void*)®, NULL)) + return; + div = in_8(reg + 0x204) & 0x0020 ? 8 : 4; + sysfreq = bd.bi_busfreq * div; + setprop(soc, "system-frequency", &sysfreq, sizeof(sysfreq)); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-824x.c b/arch/powerpc/boot/cuboot-824x.c new file mode 100644 index 000000000..15818cb97 --- /dev/null +++ b/arch/powerpc/boot/cuboot-824x.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for 824x + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_824x +#include "ppcboot.h" + +static bd_t bd; + + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c new file mode 100644 index 000000000..4063c6263 --- /dev/null +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for 83xx + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_83xx +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-85xx-cpm2.c b/arch/powerpc/boot/cuboot-85xx-cpm2.c new file mode 100644 index 000000000..ac5115beb --- /dev/null +++ b/arch/powerpc/boot/cuboot-85xx-cpm2.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for 85xx + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_85xx +#define TARGET_CPM2 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *devp; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + devp = find_node_by_devtype(NULL, "soc"); + if (devp) { + void *serial = NULL; + + setprop(devp, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != devp) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } + + devp = find_node_by_compatible(NULL, "fsl,cpm2-brg"); + if (devp) + setprop(devp, "clock-frequency", &bd.bi_brgfreq, + sizeof(bd.bi_brgfreq)); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c new file mode 100644 index 000000000..1466cc63d --- /dev/null +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for 85xx + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_85xx +#define TARGET_HAS_ETH3 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); + dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c new file mode 100644 index 000000000..e4499fba5 --- /dev/null +++ b/arch/powerpc/boot/cuboot-8xx.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for 8xx + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_8xx +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-amigaone.c b/arch/powerpc/boot/cuboot-amigaone.c new file mode 100644 index 000000000..f3b6d6236 --- /dev/null +++ b/arch/powerpc/boot/cuboot-amigaone.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for AmigaOne + * + * Author: Gerhard Pircher (gerhard_pircher@gmx.net) + * + * Based on cuboot-83xx.c + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c new file mode 100644 index 000000000..a5dcf3091 --- /dev/null +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Bamboo + * + * Author: Josh Boyer + * + * Copyright 2007 IBM Corporation + * + * Based on cuboot-ebony.c + */ + +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + bamboo_init(&bd.bi_enetaddr, &bd.bi_enet1addr); +} diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c new file mode 100644 index 000000000..3e602ee0e --- /dev/null +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Ebony + * + * Author: David Gibson + * + * Copyright 2007 David Gibson, IBM Corporatio. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ebony_init(&bd.bi_enetaddr, &bd.bi_enet1addr); +} diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c new file mode 100644 index 000000000..034a748fd --- /dev/null +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Katmai + * + * Author: Hugh Blemings + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void katmai_fixups(void) +{ + unsigned long sysclk = 33333000; + + /* 440SP Clock logic is all but identical to 440GX + * so we just use that code for now at least + */ + ibm440spe_fixup_clocks(sysclk, 6 * 1843200, 0); + + ibm440spe_fixup_memsize(); + + dt_fixup_mac_address(0, bd.bi_enetaddr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = katmai_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c new file mode 100644 index 000000000..d32765c03 --- /dev/null +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for PowerQUICC II + * (a.k.a. 82xx with CPM, not the 8240 family of chips) + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "io.h" +#include "fsl-soc.h" + +#define TARGET_CPM2 +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +struct cs_range { + u32 csnum; + u32 base; /* must be zero */ + u32 addr; + u32 size; +}; + +struct pci_range { + u32 flags; + u32 pci_addr[2]; + u32 phys_addr; + u32 size[2]; +}; + +struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)]; +struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)]; + +/* Different versions of u-boot put the BCSR in different places, and + * some don't set up the PCI PIC at all, so we assume the device tree is + * sane and update the BRx registers appropriately. + * + * For any node defined as compatible with fsl,pq2-localbus, + * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus. + * Ranges must be for whole chip selects. + */ +static void update_cs_ranges(void) +{ + void *bus_node, *parent_node; + u32 *ctrl_addr; + unsigned long ctrl_size; + u32 naddr, nsize; + int len; + int i; + + bus_node = finddevice("/localbus"); + if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus")) + return; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 2 || nsize != 1) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr, + &ctrl_size)) + goto err; + + len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf)); + + for (i = 0; i < len / sizeof(struct cs_range); i++) { + u32 base, option; + int cs = cs_ranges_buf[i].csnum; + if (cs >= ctrl_size / 8) + goto err; + + if (cs_ranges_buf[i].base != 0) + goto err; + + base = in_be32(&ctrl_addr[cs * 2]); + + /* If CS is already valid, use the existing flags. + * Otherwise, guess a sane default. + */ + if (base & 1) { + base &= 0x7fff; + option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff; + } else { + base = 0x1801; + option = 0x10; + } + + out_be32(&ctrl_addr[cs * 2], 0); + out_be32(&ctrl_addr[cs * 2 + 1], + option | ~(cs_ranges_buf[i].size - 1)); + out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr); + } + + return; + +err: + printf("Bad /localbus node\r\n"); +} + +/* Older u-boots don't set PCI up properly. Update the hardware to match + * the device tree. The prefetch mem region and non-prefetch mem region + * must be contiguous in the host bus. As required by the PCI binding, + * PCI #addr/#size must be 3/2. The parent bus must be 1/1. Only + * 32-bit PCI is supported. All three region types (prefetchable mem, + * non-prefetchable mem, and I/O) must be present. + */ +static void fixup_pci(void) +{ + struct pci_range *mem = NULL, *mmio = NULL, + *io = NULL, *mem_base = NULL; + u32 *pci_regs[3]; + u8 *soc_regs; + int i, len; + void *node, *parent_node; + u32 naddr, nsize, mem_pow2, mem_mask; + + node = finddevice("/pci"); + if (!node || !dt_is_compatible(node, "fsl,pq2-pci")) + return; + + for (i = 0; i < 3; i++) + if (!dt_xlate_reg(node, i, + (unsigned long *)&pci_regs[i], NULL)) + goto err; + + soc_regs = (u8 *)fsl_get_immr(); + if (!soc_regs) + goto unhandled; + + dt_get_reg_format(node, &naddr, &nsize); + if (naddr != 3 || nsize != 2) + goto err; + + parent_node = get_parent(node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto unhandled; + + len = getprop(node, "ranges", pci_ranges_buf, + sizeof(pci_ranges_buf)); + + for (i = 0; i < len / sizeof(struct pci_range); i++) { + u32 flags = pci_ranges_buf[i].flags & 0x43000000; + + if (flags == 0x42000000) + mem = &pci_ranges_buf[i]; + else if (flags == 0x02000000) + mmio = &pci_ranges_buf[i]; + else if (flags == 0x01000000) + io = &pci_ranges_buf[i]; + } + + if (!mem || !mmio || !io) + goto unhandled; + if (mem->size[1] != mmio->size[1]) + goto unhandled; + if (mem->size[1] & (mem->size[1] - 1)) + goto unhandled; + if (io->size[1] & (io->size[1] - 1)) + goto unhandled; + + if (mem->phys_addr + mem->size[1] == mmio->phys_addr) + mem_base = mem; + else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) + mem_base = mmio; + else + goto unhandled; + + out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); + out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); + + out_be32(&pci_regs[1][1], io->phys_addr | 1); + out_be32(&pci_regs[2][1], ~(io->size[1] - 1)); + + out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12); + out_le32(&pci_regs[0][2], mem->phys_addr >> 12); + out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000); + + out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12); + out_le32(&pci_regs[0][8], mmio->phys_addr >> 12); + out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000); + + out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12); + out_le32(&pci_regs[0][14], io->phys_addr >> 12); + out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000); + + /* Inbound translation */ + out_le32(&pci_regs[0][58], 0); + out_le32(&pci_regs[0][60], 0); + + mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + mem_mask = ~(mem_pow2 - 1) >> 12; + out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask); + + /* If PCI is disabled, drive RST high to enable. */ + if (!(in_le32(&pci_regs[0][32]) & 1)) { + /* Tpvrh (Power valid to RST# high) 100 ms */ + udelay(100000); + + out_le32(&pci_regs[0][32], 1); + + /* Trhfa (RST# high to first cfg access) 2^25 clocks */ + udelay(1020000); + } + + /* Enable bus master and memory access */ + out_le32(&pci_regs[0][64], 0x80000004); + out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6); + + /* Park the bus on PCI, and elevate PCI's arbitration priority, + * as required by section 9.6 of the user's manual. + */ + out_8(&soc_regs[0x10028], 3); + out_be32((u32 *)&soc_regs[0x1002c], 0x01236745); + + return; + +err: + printf("Bad PCI node -- using existing firmware setup.\r\n"); + return; + +unhandled: + printf("Unsupported PCI node -- using existing firmware setup.\r\n"); +} + +static void pq2_platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &bd.bi_brgfreq, 4); + + update_cs_ranges(); + fixup_pci(); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = pq2_platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c new file mode 100644 index 000000000..046478544 --- /dev/null +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Rainier + * + * Valentine Barshak + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer + * Copyright IBM Corporation, 2007 + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void rainier_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = rainier_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-sam440ep.c b/arch/powerpc/boot/cuboot-sam440ep.c new file mode 100644 index 000000000..d875119e3 --- /dev/null +++ b/arch/powerpc/boot/cuboot-sam440ep.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Sam440ep based off bamboo.c code + * original copyrights below + * + * Author: Josh Boyer + * + * Copyright 2007 IBM Corporation + * + * Based on cuboot-ebony.c + * + * Modified from cuboot-bamboo.c for sam440ep: + * Copyright 2008 Giuseppe Coviello + */ + +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "4xx.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void sam440ep_fixups(void) +{ + unsigned long sysclk = 66666666; + + ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = sam440ep_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c new file mode 100644 index 000000000..e0285c20e --- /dev/null +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Sequoia + * + * Valentine Barshak + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer + * Copyright IBM Corporation, 2007 + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void sequoia_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = sequoia_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c new file mode 100644 index 000000000..3d40670b2 --- /dev/null +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Taishan + * + * Author: Hugh Blemings + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" + +#define TARGET_4xx +#define TARGET_44x +#define TARGET_440GX +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void taishan_fixups(void) +{ + /* FIXME: sysclk should be derived by reading the FPGA + registers */ + unsigned long sysclk = 33000000; + + ibm440gx_fixup_clocks(sysclk, 6 * 1843200, 25000000); + + ibm4xx_sdram_fixup_memsize(); + + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = taishan_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c new file mode 100644 index 000000000..1ec0fa284 --- /dev/null +++ b/arch/powerpc/boot/cuboot-warp.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan + */ + +#include "ops.h" +#include "4xx.h" +#include "cuboot.h" +#include "stdio.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void warp_fixups(void) +{ + ibm440ep_fixup_clocks(66000000, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = warp_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c new file mode 100644 index 000000000..ce3fdb737 --- /dev/null +++ b/arch/powerpc/boot/cuboot-yosemite.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Yosemite + * + * Author: Josh Boyer + * + * Copyright 2008 IBM Corporation + */ + +#include "ops.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void yosemite_fixups(void) +{ + unsigned long sysclk = 66666666; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = yosemite_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot.c b/arch/powerpc/boot/cuboot.c new file mode 100644 index 000000000..7f186658f --- /dev/null +++ b/arch/powerpc/boot/cuboot.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Compatibility for old (not device tree aware) U-Boot versions + * + * Author: Scott Wood + * Consolidated using macros by David Gibson + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" + +#include "ppcboot.h" + +void cuboot_init(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + unsigned long end_of_ram) +{ + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + loader_info.initrd_addr = r4; + loader_info.initrd_size = r4 ? r5 - r4 : 0; + loader_info.cmdline = (char *)r6; + loader_info.cmdline_len = r7 - r6; + + simple_alloc_init(_end, avail_ram - 1024*1024, 32, 64); +} diff --git a/arch/powerpc/boot/cuboot.h b/arch/powerpc/boot/cuboot.h new file mode 100644 index 000000000..c2b2c58ea --- /dev/null +++ b/arch/powerpc/boot/cuboot.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_CUBOOT_H_ +#define _PPC_BOOT_CUBOOT_H_ + +void cuboot_init(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + unsigned long end_of_ram); + +#define CUBOOT_INIT() \ + do { \ + memcpy(&bd, (bd_t *)r3, sizeof(bd)); \ + cuboot_init(r4, r5, r6, r7, bd.bi_memstart + bd.bi_memsize); \ + } while (0) + +#endif /* _PPC_BOOT_CUBOOT_H_ */ diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h new file mode 100644 index 000000000..91dc3a302 --- /dev/null +++ b/arch/powerpc/boot/dcr.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_DCR_H_ +#define _PPC_BOOT_DCR_H_ + +#define mfdcr(rn) \ + ({ \ + unsigned long rval; \ + asm volatile("mfdcr %0,%1" : "=r"(rval) : "i"(rn)); \ + rval; \ + }) +#define mtdcr(rn, val) \ + asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val)) +#define mfdcrx(rn) \ + ({ \ + unsigned long rval; \ + asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \ + rval; \ + }) +#define mtdcrx(rn, val) \ + ({ \ + asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \ + }) + +/* 440GP/440GX SDRAM controller DCRs */ +#define DCRN_SDRAM0_CFGADDR 0x010 +#define DCRN_SDRAM0_CFGDATA 0x011 + +#define SDRAM0_READ(offset) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mfdcr(DCRN_SDRAM0_CFGDATA); }) +#define SDRAM0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mtdcr(DCRN_SDRAM0_CFGDATA, data); }) + +#define SDRAM0_B0CR 0x40 +#define SDRAM0_B1CR 0x44 +#define SDRAM0_B2CR 0x48 +#define SDRAM0_B3CR 0x4c + +static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, + SDRAM0_B2CR, SDRAM0_B3CR }; + +#define SDRAM_CONFIG_BANK_ENABLE 0x00000001 +#define SDRAM_CONFIG_SIZE_MASK 0x000e0000 +#define SDRAM_CONFIG_BANK_SIZE(reg) \ + (0x00400000 << ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)) + +/* 440GP External Bus Controller (EBC) */ +#define DCRN_EBC0_CFGADDR 0x012 +#define DCRN_EBC0_CFGDATA 0x013 +#define EBC_NUM_BANKS 8 +#define EBC_B0CR 0x00 +#define EBC_B1CR 0x01 +#define EBC_B2CR 0x02 +#define EBC_B3CR 0x03 +#define EBC_B4CR 0x04 +#define EBC_B5CR 0x05 +#define EBC_B6CR 0x06 +#define EBC_B7CR 0x07 +#define EBC_BXCR(n) (n) +#define EBC_BXCR_BAS 0xfff00000 +#define EBC_BXCR_BS 0x000e0000 +#define EBC_BXCR_BANK_SIZE(reg) \ + (0x100000 << (((reg) & EBC_BXCR_BS) >> 17)) +#define EBC_BXCR_BU 0x00018000 +#define EBC_BXCR_BU_OFF 0x00000000 +#define EBC_BXCR_BU_RO 0x00008000 +#define EBC_BXCR_BU_WO 0x00010000 +#define EBC_BXCR_BU_RW 0x00018000 +#define EBC_BXCR_BW 0x00006000 +#define EBC_B0AP 0x10 +#define EBC_B1AP 0x11 +#define EBC_B2AP 0x12 +#define EBC_B3AP 0x13 +#define EBC_B4AP 0x14 +#define EBC_B5AP 0x15 +#define EBC_B6AP 0x16 +#define EBC_B7AP 0x17 +#define EBC_BXAP(n) (0x10+(n)) +#define EBC_BEAR 0x20 +#define EBC_BESR 0x21 +#define EBC_CFG 0x23 +#define EBC_CID 0x24 + +/* 440GP Clock, PM, chip control */ +#define DCRN_CPC0_SR 0x0b0 +#define DCRN_CPC0_ER 0x0b1 +#define DCRN_CPC0_FR 0x0b2 +#define DCRN_CPC0_SYS0 0x0e0 +#define CPC0_SYS0_TUNE 0xffc00000 +#define CPC0_SYS0_FBDV_MASK 0x003c0000 +#define CPC0_SYS0_FWDVA_MASK 0x00038000 +#define CPC0_SYS0_FWDVB_MASK 0x00007000 +#define CPC0_SYS0_OPDV_MASK 0x00000c00 +#define CPC0_SYS0_EPDV_MASK 0x00000300 +/* Helper macros to compute the actual clock divider values from the + * encodings in the CPC0 register */ +#define CPC0_SYS0_FBDV(reg) \ + ((((((reg) & CPC0_SYS0_FBDV_MASK) >> 18) - 1) & 0xf) + 1) +#define CPC0_SYS0_FWDVA(reg) \ + (8 - (((reg) & CPC0_SYS0_FWDVA_MASK) >> 15)) +#define CPC0_SYS0_FWDVB(reg) \ + (8 - (((reg) & CPC0_SYS0_FWDVB_MASK) >> 12)) +#define CPC0_SYS0_OPDV(reg) \ + ((((reg) & CPC0_SYS0_OPDV_MASK) >> 10) + 1) +#define CPC0_SYS0_EPDV(reg) \ + ((((reg) & CPC0_SYS0_EPDV_MASK) >> 8) + 1) +#define CPC0_SYS0_EXTSL 0x00000080 +#define CPC0_SYS0_RW_MASK 0x00000060 +#define CPC0_SYS0_RL 0x00000010 +#define CPC0_SYS0_ZMIISL_MASK 0x0000000c +#define CPC0_SYS0_BYPASS 0x00000002 +#define CPC0_SYS0_NTO1 0x00000001 +#define DCRN_CPC0_SYS1 0x0e1 +#define DCRN_CPC0_CUST0 0x0e2 +#define DCRN_CPC0_CUST1 0x0e3 +#define DCRN_CPC0_STRP0 0x0e4 +#define DCRN_CPC0_STRP1 0x0e5 +#define DCRN_CPC0_STRP2 0x0e6 +#define DCRN_CPC0_STRP3 0x0e7 +#define DCRN_CPC0_GPIO 0x0e8 +#define DCRN_CPC0_PLB 0x0e9 +#define DCRN_CPC0_CR1 0x0ea +#define DCRN_CPC0_CR0 0x0eb +#define CPC0_CR0_SWE 0x80000000 +#define CPC0_CR0_CETE 0x40000000 +#define CPC0_CR0_U1FCS 0x20000000 +#define CPC0_CR0_U0DTE 0x10000000 +#define CPC0_CR0_U0DRE 0x08000000 +#define CPC0_CR0_U0DC 0x04000000 +#define CPC0_CR0_U1DTE 0x02000000 +#define CPC0_CR0_U1DRE 0x01000000 +#define CPC0_CR0_U1DC 0x00800000 +#define CPC0_CR0_U0EC 0x00400000 +#define CPC0_CR0_U1EC 0x00200000 +#define CPC0_CR0_UDIV_MASK 0x001f0000 +#define CPC0_CR0_UDIV(reg) \ + ((((reg) & CPC0_CR0_UDIV_MASK) >> 16) + 1) +#define DCRN_CPC0_MIRQ0 0x0ec +#define DCRN_CPC0_MIRQ1 0x0ed +#define DCRN_CPC0_JTAGID 0x0ef + +#define DCRN_MAL0_CFG 0x180 +#define MAL_RESET 0x80000000 + +/* 440EP Clock/Power-on Reset regs */ +#define DCRN_CPR0_ADDR 0xc +#define DCRN_CPR0_DATA 0xd +#define CPR0_PLLD0 0x60 +#define CPR0_OPBD0 0xc0 +#define CPR0_PERD0 0xe0 +#define CPR0_PRIMBD0 0xa0 +#define CPR0_SCPID 0x120 +#define CPR0_PLLC0 0x40 + +/* 440GX/405EX Clock Control reg */ +#define DCRN_CPR0_CLKUPD 0x020 +#define DCRN_CPR0_PLLC 0x040 +#define DCRN_CPR0_PLLD 0x060 +#define DCRN_CPR0_PRIMAD 0x080 +#define DCRN_CPR0_PRIMBD 0x0a0 +#define DCRN_CPR0_OPBD 0x0c0 +#define DCRN_CPR0_PERD 0x0e0 +#define DCRN_CPR0_MALD 0x100 + +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +/* SDR read/write helper macros */ +#define SDR0_READ(offset) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mfdcr(DCRN_SDR0_CONFIG_DATA); }) +#define SDR0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mtdcr(DCRN_SDR0_CONFIG_DATA, data); }) + +#define DCRN_SDR0_UART0 0x0120 +#define DCRN_SDR0_UART1 0x0121 +#define DCRN_SDR0_UART2 0x0122 +#define DCRN_SDR0_UART3 0x0123 + + +/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */ + +#define DCRN_CPR0_CFGADDR 0xc +#define DCRN_CPR0_CFGDATA 0xd + +#define CPR0_READ(offset) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mfdcr(DCRN_CPR0_CFGDATA); }) +#define CPR0_WRITE(offset, data) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mtdcr(DCRN_CPR0_CFGDATA, data); }) + + + +#endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/decompress.c b/arch/powerpc/boot/decompress.c new file mode 100644 index 000000000..6835cb53f --- /dev/null +++ b/arch/powerpc/boot/decompress.c @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Wrapper around the kernel's pre-boot decompression library. + * + * Copyright (C) IBM Corporation 2016. + */ + +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "types.h" + +/* + * The decompressor_*.c files play #ifdef games so they can be used in both + * pre-boot and regular kernel code. We need these definitions to make the + * includes work. + */ + +#define STATIC static +#define INIT + +/* + * The build process will copy the required zlib source files and headers + * out of lib/ and "fix" the includes so they do not pull in other kernel + * headers. + */ + +#ifdef CONFIG_KERNEL_GZIP +# include "decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_XZ +# include "xz_config.h" +# include "../../../lib/decompress_unxz.c" +#endif + +/* globals for tracking the state of the decompression */ +static unsigned long decompressed_bytes; +static unsigned long limit; +static unsigned long skip; +static char *output_buffer; + +/* + * flush() is called by __decompress() when the decompressor's scratch buffer is + * full. + */ +static long flush(void *v, unsigned long buffer_size) +{ + unsigned long end = decompressed_bytes + buffer_size; + unsigned long size = buffer_size; + unsigned long offset = 0; + char *in = v; + char *out; + + /* + * if we hit our decompression limit, we need to fake an error to abort + * the in-progress decompression. + */ + if (decompressed_bytes >= limit) + return -1; + + /* skip this entire block */ + if (end <= skip) { + decompressed_bytes += buffer_size; + return buffer_size; + } + + /* skip some data at the start, but keep the rest of the block */ + if (decompressed_bytes < skip && end > skip) { + offset = skip - decompressed_bytes; + + in += offset; + size -= offset; + decompressed_bytes += offset; + } + + out = &output_buffer[decompressed_bytes - skip]; + size = min(decompressed_bytes + size, limit) - decompressed_bytes; + + memcpy(out, in, size); + decompressed_bytes += size; + + return buffer_size; +} + +static void print_err(char *s) +{ + /* suppress the "error" when we terminate the decompressor */ + if (decompressed_bytes >= limit) + return; + + printf("Decompression error: '%s'\n\r", s); +} + +/** + * partial_decompress - decompresses part or all of a compressed buffer + * @inbuf: input buffer + * @input_size: length of the input buffer + * @outbuf: output buffer + * @output_size: length of the output buffer + * @_skip: number of output bytes to ignore + * + * This function takes compressed data from inbuf, decompresses and write it to + * outbuf. Once output_size bytes are written to the output buffer, or the + * stream is exhausted the function will return the number of bytes that were + * decompressed. Otherwise it will return whatever error code the decompressor + * reported (NB: This is specific to each decompressor type). + * + * The skip functionality is mainly there so the program and discover + * the size of the compressed image so that it can ask firmware (if present) + * for an appropriately sized buffer. + */ +long partial_decompress(void *inbuf, unsigned long input_size, + void *outbuf, unsigned long output_size, unsigned long _skip) +{ + int ret; + + /* + * The skipped bytes needs to be included in the size of data we want + * to decompress. + */ + output_size += _skip; + + decompressed_bytes = 0; + output_buffer = outbuf; + limit = output_size; + skip = _skip; + + ret = __decompress(inbuf, input_size, NULL, flush, outbuf, + output_size, NULL, print_err); + + /* + * If decompression was aborted due to an actual error rather than + * a fake error that we used to abort, then we should report it. + */ + if (decompressed_bytes < limit) + return ret; + + return decompressed_bytes - skip; +} diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c new file mode 100644 index 000000000..58fbcfcc9 --- /dev/null +++ b/arch/powerpc/boot/devtree.c @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * devtree.c - convenience functions for device tree manipulation + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * Authors: David Gibson + * Scott Wood + */ +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "of.h" + +void dt_fixup_memory(u64 start, u64 size) +{ + void *root, *memory; + int naddr, nsize, i; + u32 memreg[4]; + + root = finddevice("/"); + if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0) + naddr = 2; + else + naddr = be32_to_cpu(naddr); + if (naddr < 1 || naddr > 2) + fatal("Can't cope with #address-cells == %d in /\n\r", naddr); + + if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0) + nsize = 1; + else + nsize = be32_to_cpu(nsize); + if (nsize < 1 || nsize > 2) + fatal("Can't cope with #size-cells == %d in /\n\r", nsize); + + i = 0; + if (naddr == 2) + memreg[i++] = cpu_to_be32(start >> 32); + memreg[i++] = cpu_to_be32(start & 0xffffffff); + if (nsize == 2) + memreg[i++] = cpu_to_be32(size >> 32); + memreg[i++] = cpu_to_be32(size & 0xffffffff); + + memory = finddevice("/memory"); + if (! memory) { + memory = create_node(NULL, "memory"); + setprop_str(memory, "device_type", "memory"); + } + + printf("Memory <- <0x%x", be32_to_cpu(memreg[0])); + for (i = 1; i < (naddr + nsize); i++) + printf(" 0x%x", be32_to_cpu(memreg[i])); + printf("> (%ldMB)\n\r", (unsigned long)(size >> 20)); + + setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32)); +} + +#define MHZ(x) ((x + 500000) / 1000000) + +void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) +{ + void *devp = NULL; + + printf("CPU clock-frequency <- 0x%x (%dMHz)\n\r", cpu, MHZ(cpu)); + printf("CPU timebase-frequency <- 0x%x (%dMHz)\n\r", tb, MHZ(tb)); + if (bus > 0) + printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus)); + + while ((devp = find_node_by_devtype(devp, "cpu"))) { + setprop_val(devp, "clock-frequency", cpu_to_be32(cpu)); + setprop_val(devp, "timebase-frequency", cpu_to_be32(tb)); + if (bus > 0) + setprop_val(devp, "bus-frequency", cpu_to_be32(bus)); + } + + timebase_period_ns = 1000000000 / tb; +} + +void dt_fixup_clock(const char *path, u32 freq) +{ + void *devp = finddevice(path); + + if (devp) { + printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq)); + setprop_val(devp, "clock-frequency", cpu_to_be32(freq)); + } +} + +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr) +{ + void *devp = find_node_by_alias(alias); + + if (devp) { + printf("%s: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias, + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + + setprop(devp, "local-mac-address", addr, 6); + } +} + +void dt_fixup_mac_address(u32 index, const u8 *addr) +{ + void *devp = find_node_by_prop_value(NULL, "linux,network-index", + (void*)&index, sizeof(index)); + + if (devp) { + printf("ENET%d: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", index, + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + + setprop(devp, "local-mac-address", addr, 6); + } +} + +void __dt_fixup_mac_addresses(u32 startindex, ...) +{ + va_list ap; + u32 index = startindex; + const u8 *addr; + + va_start(ap, startindex); + + while ((addr = va_arg(ap, const u8 *))) + dt_fixup_mac_address(index++, addr); + + va_end(ap); +} + +#define MAX_ADDR_CELLS 4 + +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) +{ + if (getprop(node, "#address-cells", naddr, 4) != 4) + *naddr = 2; + else + *naddr = be32_to_cpu(*naddr); + if (getprop(node, "#size-cells", nsize, 4) != 4) + *nsize = 1; + else + *nsize = be32_to_cpu(*nsize); +} + +static void copy_val(u32 *dest, u32 *src, int naddr) +{ + int pad = MAX_ADDR_CELLS - naddr; + + memset(dest, 0, pad * 4); + memcpy(dest + pad, src, naddr * 4); +} + +static int sub_reg(u32 *reg, u32 *sub) +{ + int i, borrow = 0; + + for (i = MAX_ADDR_CELLS - 1; i >= 0; i--) { + int prev_borrow = borrow; + borrow = reg[i] < sub[i] + prev_borrow; + reg[i] -= sub[i] + prev_borrow; + } + + return !borrow; +} + +static int add_reg(u32 *reg, u32 *add, int naddr) +{ + int i, carry = 0; + + for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) { + u64 tmp = (u64)be32_to_cpu(reg[i]) + be32_to_cpu(add[i]) + carry; + carry = tmp >> 32; + reg[i] = cpu_to_be32((u32)tmp); + } + + return !carry; +} + +/* It is assumed that if the first byte of reg fits in a + * range, then the whole reg block fits. + */ +static int compare_reg(u32 *reg, u32 *range, u32 *rangesize) +{ + int i; + u32 end; + + for (i = 0; i < MAX_ADDR_CELLS; i++) { + if (be32_to_cpu(reg[i]) < be32_to_cpu(range[i])) + return 0; + if (be32_to_cpu(reg[i]) > be32_to_cpu(range[i])) + break; + } + + for (i = 0; i < MAX_ADDR_CELLS; i++) { + end = be32_to_cpu(range[i]) + be32_to_cpu(rangesize[i]); + + if (be32_to_cpu(reg[i]) < end) + break; + if (be32_to_cpu(reg[i]) > end) + return 0; + } + + return reg[i] != end; +} + +/* reg must be MAX_ADDR_CELLS */ +static int find_range(u32 *reg, u32 *ranges, int nregaddr, + int naddr, int nsize, int buflen) +{ + int nrange = nregaddr + naddr + nsize; + int i; + + for (i = 0; i + nrange <= buflen; i += nrange) { + u32 range_addr[MAX_ADDR_CELLS]; + u32 range_size[MAX_ADDR_CELLS]; + + copy_val(range_addr, ranges + i, nregaddr); + copy_val(range_size, ranges + i + nregaddr + naddr, nsize); + + if (compare_reg(reg, range_addr, range_size)) + return i; + } + + return -1; +} + +/* Currently only generic buses without special encodings are supported. + * In particular, PCI is not supported. Also, only the beginning of the + * reg block is tracked; size is ignored except in ranges. + */ +static u32 prop_buf[MAX_PROP_LEN / 4]; + +static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, + unsigned long *size) +{ + u32 last_addr[MAX_ADDR_CELLS]; + u32 this_addr[MAX_ADDR_CELLS]; + void *parent; + u64 ret_addr, ret_size; + u32 naddr, nsize, prev_naddr, prev_nsize; + int buflen, offset; + + parent = get_parent(node); + if (!parent) + return 0; + + dt_get_reg_format(parent, &naddr, &nsize); + if (nsize > 2) + return 0; + + offset = (naddr + nsize) * res; + + if (reglen < offset + naddr + nsize || + MAX_PROP_LEN < (offset + naddr + nsize) * 4) + return 0; + + copy_val(last_addr, prop_buf + offset, naddr); + + ret_size = be32_to_cpu(prop_buf[offset + naddr]); + if (nsize == 2) { + ret_size <<= 32; + ret_size |= be32_to_cpu(prop_buf[offset + naddr + 1]); + } + + for (;;) { + prev_naddr = naddr; + prev_nsize = nsize; + node = parent; + + parent = get_parent(node); + if (!parent) + break; + + dt_get_reg_format(parent, &naddr, &nsize); + + buflen = getprop(node, "ranges", prop_buf, + sizeof(prop_buf)); + if (buflen == 0) + continue; + if (buflen < 0 || buflen > sizeof(prop_buf)) + return 0; + + offset = find_range(last_addr, prop_buf, prev_naddr, + naddr, prev_nsize, buflen / 4); + if (offset < 0) + return 0; + + copy_val(this_addr, prop_buf + offset, prev_naddr); + + if (!sub_reg(last_addr, this_addr)) + return 0; + + copy_val(this_addr, prop_buf + offset + prev_naddr, naddr); + + if (!add_reg(last_addr, this_addr, naddr)) + return 0; + } + + if (naddr > 2) + return 0; + + ret_addr = ((u64)be32_to_cpu(last_addr[2]) << 32) | be32_to_cpu(last_addr[3]); + if (sizeof(void *) == 4 && + (ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL || + ret_addr + ret_size > 0x100000000ULL)) + return 0; + + *addr = ret_addr; + if (size) + *size = ret_size; + + return 1; +} + +int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size) +{ + int reglen; + + reglen = getprop(node, "reg", prop_buf, sizeof(prop_buf)) / 4; + return dt_xlate(node, res, reglen, addr, size); +} + +int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr) +{ + + if (buflen > sizeof(prop_buf)) + return 0; + + memcpy(prop_buf, buf, buflen); + return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL); +} + +int dt_is_compatible(void *node, const char *compat) +{ + char *buf = (char *)prop_buf; + int len, pos; + + len = getprop(node, "compatible", buf, MAX_PROP_LEN); + if (len < 0) + return 0; + + for (pos = 0; pos < len; pos++) { + if (!strcmp(buf + pos, compat)) + return 1; + + pos += strnlen(&buf[pos], len - pos); + } + + return 0; +} + +int dt_get_virtual_reg(void *node, void **addr, int nres) +{ + unsigned long xaddr; + int n, i; + + n = getprop(node, "virtual-reg", addr, nres * 4); + if (n > 0) { + for (i = 0; i < n/4; i ++) + ((u32 *)addr)[i] = be32_to_cpu(((u32 *)addr)[i]); + return n / 4; + } + + for (n = 0; n < nres; n++) { + if (!dt_xlate_reg(node, n, &xaddr, NULL)) + break; + + addr[n] = (void *)xaddr; + } + + return n; +} + diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S new file mode 100644 index 000000000..4354928ed --- /dev/null +++ b/arch/powerpc/boot/div64.S @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Divide a 64-bit unsigned number by a 32-bit unsigned number. + * This routine assumes that the top 32 bits of the dividend are + * non-zero to start with. + * On entry, r3 points to the dividend, which get overwritten with + * the 64-bit quotient, and r4 contains the divisor. + * On exit, r3 contains the remainder. + * + * Copyright (C) 2002 Paul Mackerras, IBM Corp. + */ +#include "ppc_asm.h" + + .globl __div64_32 +__div64_32: + lwz r5,0(r3) # get the dividend into r5/r6 + lwz r6,4(r3) + cmplw r5,r4 + li r7,0 + li r8,0 + blt 1f + divwu r7,r5,r4 # if dividend.hi >= divisor, + mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor + subf. r5,r0,r5 # dividend.hi %= divisor + beq 3f +1: mr r11,r5 # here dividend.hi != 0 + andis. r0,r5,0xc000 + bne 2f + cntlzw r0,r5 # we are shifting the dividend right + li r10,-1 # to make it < 2^32, and shifting + srw r10,r10,r0 # the divisor right the same amount, + addc r9,r4,r10 # rounding up (so the estimate cannot + andc r11,r6,r10 # ever be too large, only too small) + andc r9,r9,r10 + addze r9,r9 + or r11,r5,r11 + rotlw r9,r9,r0 + rotlw r11,r11,r0 + divwu r11,r11,r9 # then we divide the shifted quantities +2: mullw r10,r11,r4 # to get an estimate of the quotient, + mulhwu r9,r11,r4 # multiply the estimate by the divisor, + subfc r6,r10,r6 # take the product from the divisor, + add r8,r8,r11 # and add the estimate to the accumulated + subfe. r5,r9,r5 # quotient + bne 1b +3: cmplw r6,r4 + blt 4f + divwu r0,r6,r4 # perform the remaining 32-bit division + mullw r10,r0,r4 # and get the remainder + add r8,r8,r0 + subf r6,r10,r6 +4: stw r7,0(r3) # return the quotient in *r3 + stw r8,4(r3) + mr r3,r6 # return the remainder in r3 + blr + +/* + * Extended precision shifts. + * + * Updated to be valid for shift counts from 0 to 63 inclusive. + * -- Gabriel + * + * R3/R4 has 64 bit value + * R5 has shift count + * result in R3/R4 + * + * ashrdi3: arithmetic right shift (sign propagation) + * lshrdi3: logical right shift + * ashldi3: left shift + */ + .globl __ashrdi3 +__ashrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 + sraw r7,r3,r7 # t2 = MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 + sraw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + + .globl __ashldi3 +__ashldi3: + subfic r6,r5,32 + slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count + addi r7,r5,32 # could be xori, or addi with -32 + srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) + slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) + or r3,r3,r6 # MSW |= t1 + slw r4,r4,r5 # LSW = LSW << count + or r3,r3,r7 # MSW |= t2 + blr + + .globl __lshrdi3 +__lshrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + srw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile new file mode 100644 index 000000000..1e61a951c --- /dev/null +++ b/arch/powerpc/boot/dts/Makefile @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 + +subdir-y += fsl + +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) + +# PPC44x platforms +dtb-$(CONFIG_PPC44x_SIMPLE) += arches.dtb bamboo.dtb bluestone.dtb glacier.dtb +dtb-$(CONFIG_PPC44x_SIMPLE) += eiger.dtb katmai.dtb rainier.dtb redwood.dtb +dtb-$(CONFIG_PPC44x_SIMPLE) += sequoia.dtb taishan.dtb yosemite.dtb icon.dtb +dtb-$(CONFIG_EBONY) += ebony.dtb +dtb-$(CONFIG_SAM440EP) += sam440ep.dtb +dtb-$(CONFIG_WARP) += warp.dtb +dtb-$(CONFIG_ISS4xx) += iss4xx.dtb iss4xx-mpic.dtb +dtb-$(CONFIG_CANYONLANDS) += canyonlands.dtb +dtb-$(CONFIG_CURRITUCK) += currituck.dtb +dtb-$(CONFIG_AKEBONO) += akebono.dtb +dtb-$(CONFIG_FSP2) += fsp2.dtb + +# Embedded 6xx platforms +dtb-$(CONFIG_LINKSTATION) += kuroboxHG.dtb kuroboxHD.dtb +dtb-$(CONFIG_STORCENTER) += storcenter.dtb +dtb-$(CONFIG_PPC_HOLLY) += holly.dtb +dtb-$(CONFIG_GAMECUBE) += gamecube.dtb +dtb-$(CONFIG_WII) += wii.dtb +dtb-$(CONFIG_MVME5100) += mvme5100.dtb + +# MPC8xx platforms +dtb-$(CONFIG_MPC885ADS) += mpc885ads.dtb +dtb-$(CONFIG_MPC86XADS) += mpc866ads.dtb +dtb-$(CONFIG_PPC_EP88XC) += ep88xc.dtb +dtb-$(CONFIG_PPC_ADDER875) += adder875-redboot.dtb adder875-uboot.dtb +dtb-$(CONFIG_TQM8XX) += tqm8xx.dtb + +# MPC512x platforms +dtb-$(CONFIG_MPC5121_ADS) += mpc5121ads.dtb +dtb-$(CONFIG_MPC512x_GENERIC) += mpc5125twr.dtb ac14xx.dts +dtb-$(CONFIG_PDM360NG) += pdm360ng.dtb + +# MPC5200 platforms +dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += a3m071.dtb a4m072.dtb charon.dtb cm5200.dtb +dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += digsy_mtc.dtb motionpro.dtb mucmc52.dtb +dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += o2d.dtb o2d300.dtb o2dnt2.dtb o2i.dtb +dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += o2mnt.dtb o3dnt.dtb pcm030.dtb pcm032.dtb +dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += tqm5200.dtb uc101.dtb +dtb-$(CONFIG_PPC_LITE5200) += lite5200.dtb lite5200b.dtb +dtb-$(CONFIG_PPC_MEDIA5200) += media5200.dtb + +# MPC82xx platforms +dtb-$(CONFIG_EP8248E) += ep8248e.dtb +dtb-$(CONFIG_MGCOGE) += mgcoge.dtb + +# MPC83xx platforms +dtb-$(CONFIG_MPC830x_RDB) += mpc8308rdb.dtb mpc8308_p1m.dtb +dtb-$(CONFIG_MPC831x_RDB) += mpc8313erdb.dtb mpc8315erdb.dtb +dtb-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.dtb +dtb-$(CONFIG_MPC834x_ITX) += mpc8349emitx.dtb mpc8349emitxgp.dtb +dtb-$(CONFIG_ASP834x) += asp834x-redboot.dtb +dtb-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.dtb +dtb-$(CONFIG_KMETER1) += kmeter1.dtb +dtb-$(CONFIG_MPC837x_RDB) += mpc8377_rdb.dtb mpc8378_rdb.dtb mpc8379_rdb.dtb +dtb-$(CONFIG_MPC837x_RDB) += mpc8377_wlan.dtb + +# MPC85xx platforms +dtb-$(CONFIG_STX_GP3) += stx_gp3_8560.dtb stxssa8555.dtb +dtb-$(CONFIG_TQM85xx) += tqm8540.dtb tqm8541.dtb tqm8548.dtb +dtb-$(CONFIG_TQM85xx) += tqm8548-bigflash.dtb tqm8555.dtb tqm8560.dtb +dtb-$(CONFIG_SOCRATES) += socrates.dtb +dtb-$(CONFIG_KSI8560) += ksi8560.dtb +dtb-$(CONFIG_XES_MPC85xx) += xcalibur1501.dtb xpedite5200.dtb +dtb-$(CONFIG_XES_MPC85xx) += xpedite5200_xmon.dtb xpedite5301.dtb +dtb-$(CONFIG_XES_MPC85xx) += xpedite5330.dtb xpedite5370.dtb +dtb-$(CONFIG_PPC_P2020) += turris1x.dtb + +# Misc. platforms +dtb-$(CONFIG_PPC_MICROWATT) += microwatt.dtb +dtb-$(CONFIG_AMIGAONE) += amigaone.dtb +dtb-$(CONFIG_PPC_PS3) += ps3.dtb diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts new file mode 100644 index 000000000..034cfd8aa --- /dev/null +++ b/arch/powerpc/boot/dts/a3m071.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * a3m071 board Device Tree Source + * + * Copyright 2012 Stefan Roese + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "anonymous,a3m071"; + compatible = "anonymous,a3m071"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + spi@f00 { + status = "disabled"; + }; + + usb: usb@1000 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + status = "disabled"; + }; + + psc@2400 { + status = "disabled"; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@3 { + reg = <0x03>; + }; + }; + + ata@3a00 { + status = "disabled"; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + status = "disabled"; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe9000000 0x00080000 + 5 0 0xe8000000 0x00010000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x0 0x02000000>; + compatible = "cfi-flash"; + bank-width = <2>; + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "env"; + reg = <0x00040000 0x00020000>; + }; + partition@60000 { + label = "dtb"; + reg = <0x00060000 0x00020000>; + }; + partition@80000 { + label = "kernel"; + reg = <0x00080000 0x00500000>; + }; + partition@580000 { + label = "root"; + reg = <0x00580000 0x00A80000>; + }; + }; + + fpga@3,0 { + compatible = "anonymous,a3m071-fpga"; + reg = <3 0x0 0x00080000 + 5 0x0 0x00010000>; + interrupts = <0 0 3>; /* level low */ + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts new file mode 100644 index 000000000..d4270a2ec --- /dev/null +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * a4m072 board Device Tree Source + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; + +/ { + model = "anonymous,a4m072"; + compatible = "anonymous,a4m072"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + cdm@200 { + fsl,init-ext-48mhz-en = <0x0>; + fsl,init-fd-enable = <0x01>; + fsl,init-fd-counters = <0x3333>; + }; + + spi@f00 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc@2400 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + interrupts = <1 2 0>; /* IRQ 2 active low */ + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2e { + compatible = "nsc,lm87"; + reg = <0x2e>; + }; + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0x62000000 0x00400000 + 2 0 0x64000000 0x00200000 + 3 0 0x66000000 0x01000000 + 6 0 0x68000000 0x01000000 + 7 0 0x6a000000 0x00000004>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + sram0@1,0 { + compatible = "mtd-ram"; + reg = <1 0x00000 0x00400000>; + bank-width = <2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xc000 0 0 1 &mpc5200_pic 1 3 3 + 0xc000 0 0 2 &mpc5200_pic 1 3 3 + 0xc000 0 0 3 &mpc5200_pic 1 3 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3>; + clock-frequency = <0>; /* From boot loader */ + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts new file mode 100644 index 000000000..5d8877e1f --- /dev/null +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for the MPC5121e based ac14xx board + * + * Copyright 2012 Anatolij Gustschin + */ + + +#include "mpc5121.dtsi" + +/ { + model = "ac14xx"; + compatible = "ifm,ac14xx", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial7; + spi4 = &spi4; + spi5 = &spi5; + }; + + cpus { + PowerPC,5121@0 { + timebase-frequency = <40000000>; /* 40 MHz (csb/4) */ + bus-frequency = <160000000>; /* 160 MHz csb bus */ + clock-frequency = <400000000>; /* 400 MHz ppc core */ + }; + }; + + memory { + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + nfc@40000000 { + status = "disabled"; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */ + 0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */ + 0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */ + 0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */ + 0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */ + 0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + label = "dtb-kernel-production"; + reg = <0x00000000 0x00400000>; + }; + partition@1 { + label = "filesystem-production"; + reg = <0x00400000 0x03400000>; + }; + + partition@2 { + label = "recovery"; + reg = <0x03800000 0x00700000>; + }; + + partition@3 { + label = "uboot-code"; + reg = <0x03f00000 0x00040000>; + }; + partition@4 { + label = "uboot-env1"; + reg = <0x03f40000 0x00020000>; + }; + partition@5 { + label = "uboot-env2"; + reg = <0x03f60000 0x00020000>; + }; + }; + + fram@1,0 { + compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq"; + reg = <1 0x00000000 0x00010000>; + }; + + asi@2,0 { + /* masters mapping: CS, CS offset, size */ + reg = <2 0x00000000 0x00080000 + 6 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "ifm,ac14xx-asi-fpga"; + gpios = < + &gpio_pic 26 0 /* prog */ + &gpio_pic 27 0 /* done */ + &gpio_pic 10 0 /* reset */ + >; + + master@1 { + interrupts = <20 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <2 0x00009000 0x00009100>; + label = "AS-i master 1"; + }; + + master@2 { + interrupts = <21 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <6 0x00009000 0x00009100>; + label = "AS-i master 2"; + }; + }; + + netx@3,0 { + compatible = "ifm,netx"; + reg = <0x3 0x00000000 0x00020000>; + chipselect = <3 0x00101140 0x00203100>; + interrupts = <17 0x8>; + gpios = <&gpio_pic 15 0>; + }; + + safety@5,0 { + compatible = "ifm,safety"; + reg = <0x5 0x00000000 0x00010000>; + chipselect = <5 0x00009000 0x00009100>; + interrupts = <22 0x2>; + interrupt-parent = <&gpio_pic>; + gpios = < + &gpio_pic 12 0 /* prog */ + &gpio_pic 11 0 /* done */ + >; + }; + }; + + clocks { + osc { + clock-frequency = <25000000>; + }; + }; + + soc@80000000 { + bus-frequency = <80000000>; /* 80 MHz ips bus */ + + clock@f00 { + compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; + }; + + /* + * GPIO PIC: + * interrupts cell = + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + gpio_pic: gpio@1100 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdhc@1500 { + cd-gpios = <&gpio_pic 23 0>; /* card detect */ + wp-gpios = <&gpio_pic 24 0>; /* write protect */ + wp-inverted; /* WP active high */ + }; + + i2c@1700 { + /* use Fast-mode */ + clock-frequency = <400000>; + + at24@30 { + compatible = "atmel,24c01"; + reg = <0x30>; + }; + + at24@31 { + compatible = "atmel,24c01"; + reg = <0x31>; + }; + + temp@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + }; + + at24@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + }; + + at24@51 { + compatible = "atmel,24c01"; + reg = <0x51>; + }; + + at24@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + + at24@53 { + compatible = "atmel,24c01"; + reg = <0x53>; + }; + + at24@54 { + compatible = "atmel,24c01"; + reg = <0x54>; + }; + + at24@55 { + compatible = "atmel,24c01"; + reg = <0x55>; + }; + + at24@56 { + compatible = "atmel,24c01"; + reg = <0x56>; + }; + + at24@57 { + compatible = "atmel,24c01"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + axe_pic: axe-base@2000 { + compatible = "fsl,mpc5121-axe-base"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + axe-app { + compatible = "fsl,mpc5121-axe-app"; + interrupt-parent = <&axe_pic>; + interrupts = < + /* soft interrupts */ + 0 0x0 1 0x0 2 0x0 3 0x0 + 4 0x0 5 0x0 6 0x0 7 0x0 + /* fifo interrupts */ + 8 0x0 9 0x0 10 0x0 11 0x0 + >; + }; + + display@2100 { + edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00 + 0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27 + 1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01 + 01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04 + 21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F + 3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45 + 54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10 + 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5]; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + enet: ethernet@2800 { + phy-handle = <&phy0>; + }; + + usb@3000 { + status = "disabled"; + }; + + usb@4000 { + status = "disabled"; + }; + + /* PSC3 serial port A, aka ttyPSC0 */ + serial0: psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + /* PSC4 in SPI mode */ + spi4: psc@11400 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <768>; + fsl,tx-fifo-size = <768>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio_pic 25 0>; + + flash: m25p128@0 { + compatible = "st,m25p128"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi-flash0"; + reg = <0x00000000 0x01000000>; + }; + }; + }; + + /* PSC5 in SPI mode */ + spi5: psc@11500 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,mode = "spi-master"; + fsl,rx-fifo-size = <128>; + fsl,tx-fifo-size = <128>; + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "ilitek,ili922x"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + }; + }; + + /* PSC7 serial port C, aka ttyPSC2 */ + serial7: psc@11700 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <1>; + gpio-activelow; + col-gpios-binary; + col-switch-delay-ms = <200>; + + col-gpios = <&gpio_pic 1 0>; /* pin1 */ + + row-gpios = <&gpio_pic 2 0 /* pin2 */ + &gpio_pic 3 0 /* pin3 */ + &gpio_pic 4 0>; /* pin4 */ + + linux,keymap = <0x0000006e /* FN LEFT */ + 0x01000067 /* UP */ + 0x02000066 /* FN RIGHT */ + 0x00010069 /* LEFT */ + 0x0101006a /* DOWN */ + 0x0201006c>; /* RIGHT */ + }; + }; + + leds { + compatible = "gpio-leds"; + + backlight { + label = "backlight"; + gpios = <&gpio_pic 0 0>; + default-state = "keep"; + }; + green { + label = "green"; + gpios = <&gpio_pic 18 0>; + default-state = "keep"; + }; + red { + label = "red"; + gpios = <&gpio_pic 19 0>; + default-state = "keep"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts new file mode 100644 index 000000000..b51c97abf --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for MPC885 ADS running RedBoot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0 0 0xfe000000 0x00800000 + 2 0 0xfa100000 0x00008000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfa200000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <50000000>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts new file mode 100644 index 000000000..ec776103f --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for MPC885 ADS running U-Boot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0 0 0xfe000000 0x01000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <50000000>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts new file mode 100644 index 000000000..343326c30 --- /dev/null +++ b/arch/powerpc/boot/dts/akebono.dts @@ -0,0 +1,415 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,akebono"; + compatible = "ibm,akebono", "ibm,476gtr"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "okay"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + single-cpu-affinity; + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + HSTA0: hsta@310000e0000 { + compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi"; + reg = <0x310 0x000e0000 0x0 0xf0>; + interrupt-parent = <&MPIC>; + interrupts = <108 0 + 109 0 + 110 0 + 111 0 + 112 0 + 113 0 + 114 0 + 115 0 + 116 0 + 117 0 + 118 0 + 119 0 + 120 0 + 121 0 + 122 0 + 123 0>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-476gtr", "ibm,mcmal2"; + dcr-reg = <0xc0000000 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&MPIC>; + interrupts = < /*TXEOB*/ 77 0x4 + /*RXEOB*/ 78 0x4 + /*SERR*/ 76 0x4 + /*TXDE*/ 79 0x4 + /*RXDE*/ 80 0x4>; + }; + + SATA0: sata@30000010000 { + compatible = "ibm,476gtr-ahci"; + reg = <0x300 0x00010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <93 2>; + }; + + EHCI0: usb@30010000000 { + compatible = "ibm,476gtr-ehci", "generic-ehci"; + reg = <0x300 0x10000000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <85 2>; + }; + + SD0: sd@30000000000 { + compatible = "ibm,476gtr-sdhci", "generic-sdhci"; + reg = <0x300 0x00000000 0x0 0x10000>; + interrupts = <91 2>; + interrupt-parent = <&MPIC>; + }; + + OHCI0: usb@30010010000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <89 1>; + }; + + OHCI1: usb@30010020000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10020000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <88 1>; + }; + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x0000033f 0x00000000 0x80000000 + 0x80000000 0x0000033f 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + RGMII0: emac-rgmii-wol@50004 { + compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol"; + reg = <0x50004 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@30000 { + device_type = "network"; + compatible = "ibm,emac-476gtr", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0x30000 0x78>; + + /* local-mac-address will normally be added by + * the wrapper. If your device doesn't support + * passing data to the wrapper (in the form + * local-mac-addr=) then you will need + * to set it manually here. */ + //local-mac-address = [000000000000]; + + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-wol-device = <&RGMII0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + UART0: serial@10000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000 0x00000008>; + virtual-reg = <0xe8010000>; + clock-frequency = <1851851>; + current-speed = <38400>; + interrupt-parent = <&MPIC>; + interrupts = <39 2>; + }; + + IIC0: i2c@0 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x0 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <37 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "st,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + + IIC1: i2c@100 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x100 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <38 2>; + #address-cells = <1>; + #size-cells = <0>; + avr@58 { + compatible = "ibm,akebono-avr"; + reg = <0x58>; + }; + }; + + FPGA0: fpga@ebc00000 { + compatible = "ibm,akebono-fpga"; + reg = <0xebc00000 0x8>; + }; + }; + + PCIE0: pcie@10100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xc0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; + }; + + PCIE1: pcie@20100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x100 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; + }; + + PCIE2: pcie@18100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xe0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; + }; + + PCIE3: pcie@28100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x3>; /* port number */ + reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x120 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>; + }; + }; + + chosen { + stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts new file mode 100644 index 000000000..5c68db36d --- /dev/null +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * AmigaOne Device Tree Source + * + * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) + */ + +/dts-v1/; + +/ { + model = "AmigaOne"; + compatible = "eyetech,amigaone"; + coherency-off; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33.3 MHz, from U-boot + clock-frequency = <0>; // From U-boot + bus-frequency = <0>; // From U-boot + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; // From U-boot + }; + + pci@80000000 { + device_type = "pci"; + compatible = "mai-logic,articia-s"; + bus-frequency = <33333333>; + bus-range = <0 0xff>; + ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O + 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory + 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) + // Configuration address and data register. + reg = <0xfec00cf8 4 + 0xfee00cfc 4>; + 8259-interrupt-acknowledge = <0xfef00000>; + // Do not define a interrupt-parent here, if there is no + // interrupt-map property. + #address-cells = <3>; + #size-cells = <2>; + + isa@7 { + device_type = "isa"; + compatible = "pciclass,0601"; + vendor-id = <0x00001106>; + device-id = <0x00000686>; + revision-id = <0x00000010>; + class-code = <0x00060100>; + subsystem-id = <0>; + subsystem-vendor-id = <0>; + devsel-speed = <0x00000001>; + min-grant = <0>; + max-latency = <0>; + /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + #interrupt-cells = <2>; + #address-cells = <2>; + #size-cells = <1>; + + dma-controller@0 { + compatible = "pnpPNP,200"; + reg = <1 0x00000000 0x00000020 + 1 0x00000080 0x00000010 + 1 0x000000c0 0x00000020>; + }; + + i8259: interrupt-controller@20 { + device_type = "interrupt-controller"; + compatible = "pnpPNP,000"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + reserved-interrupts = <2>; + #interrupt-cells = <2>; + }; + + timer@40 { + // Also adds pcspkr to platform devices. + compatible = "pnpPNP,100"; + reg = <1 0x00000040 0x00000020>; + }; + + 8042@60 { + device_type = "8042"; + reg = <1 0x00000060 0x00000001 + 1 0x00000064 0x00000001>; + interrupts = <1 3 12 3>; + #address-cells = <1>; + #size-cells = <0>; + + keyboard@0 { + compatible = "pnpPNP,303"; + reg = <0>; + }; + + mouse@1 { + compatible = "pnpPNP,f03"; + reg = <1>; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 0x00000070 0x00000002>; + interrupts = <8 3>; + }; + + serial@3f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000003f8 0x00000008>; + interrupts = <4 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + serial@2f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000002f8 0x00000008>; + interrupts = <3 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + parallel@378 { + device_type = "parallel"; + // No ECP support for now, otherwise add "pnpPNP,401". + compatible = "pnpPNP,400"; + reg = <1 0x00000378 0x00000003 + 1 0x00000778 0x00000003>; + }; + + fdc@3f0 { + device_type = "fdc"; + compatible = "pnpPNP,700"; + reg = <1 0x000003f0 0x00000008>; + interrupts = <6 3>; + #address-cells = <1>; + #size-cells = <0>; + + disk@0 { + reg = <0>; + }; + }; + }; + }; + + chosen { + stdout-path = "/pci@80000000/isa@7/serial@3f8"; + }; +}; diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts new file mode 100644 index 000000000..75a376a99 --- /dev/null +++ b/arch/powerpc/boot/dts/arches.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for AMCC Arches (dual 460GT board) + * + * (C) Copyright 2008 Applied Micro Circuits Corporation + * Victor Gallardo + * Adam Graham + * + * Based on the glacier.dts file + * Stefan Roese + * Copyright 2008 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,arches"; + compatible = "amcc,arches"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <3>; + num-rx-chans = <24>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x01b60000>; + }; + partition@1f60000 { + label = "env"; + reg = <0x01f60000 0x00040000>; + }; + partition@1fa0000 { + label = "u-boot"; + reg = <0x01fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + sttm@4a { + compatible = "ad,ad7414"; + reg = <0x4a>; + interrupt-parent = <&UIC1>; + interrupts = <0x0 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0xffffffff>; + gpcs-address = <0x0000000a>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0x00000000>; + gpcs-address = <0x0000000b>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "sgmii"; + phy-map = <0x00000001>; + gpcs-address = <0x0000000C>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts new file mode 100644 index 000000000..c541bd367 --- /dev/null +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Analogue & Micro ASP8347 Device Tree Source + * + * Copyright 2008 Codehermit + */ + +/dts-v1/; + +/ { + model = "Analogue & Micro ASP8347E"; + compatible = "analogue-and-micro,asp8347e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8347@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x8000000>; // 128MB at 0 + }; + + localbus@ff005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8347e-localbus", + "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xff005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = < + 0 0 0xf0000000 0x02000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc8349@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x00100000>; + reg = <0xff000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8347-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 08 e5 11 32 33 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 08 e5 11 32 34 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <400000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <400000000>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + chosen { + bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2"; + stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 000000000..b5861fa38 --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,302 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + * The chip also supports a larger memory range but + * it's not naturally aligned, so our code will break + */ + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 + + /* IDSEL 3 */ + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 + + /* IDSEL 4 */ + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 + >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts new file mode 100644 index 000000000..697159531 --- /dev/null +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -0,0 +1,370 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for Bluestone (APM821xx) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "apm,bluestone"; + compatible = "apm,bluestone"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm821xx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + OCM: ocm@400040000 { + compatible = "ibm,ocm"; + status = "okay"; + cell-index = <1>; + /* configured in U-Boot */ + reg = <4 0x00040000 0x8000>; /* 32K */ + }; + + SDR0: sdr { + compatible = "ibm,sdr-apm821xx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-apm821xx"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 + 0x030 0x008>; + cache-line-size = <32>; + cache-size = <262144>; + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-apm821xx"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + descriptor-memory = "ocm"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>; + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "env"; + reg = <0x00180000 0x00020000>; + }; + partition@1a0000 { + label = "u-boot"; + reg = <0x001a0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + /* 2Gb Nand Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x00000000 0x00C00000>; + }; + partition@c00000 { + label = "environment"; + reg = <0x00C00000 0x00B00000>; + }; + partition@1700000 { + label = "kernel"; + reg = <0x01700000 0x00E00000>; + }; + partition@2500000 { + label = "root"; + reg = <0x02500000 0x08200000>; + }; + partition@a700000 { + label = "device-tree"; + reg = <0x0A700000 0x00B00000>; + }; + partition@b200000 { + label = "config"; + reg = <0x0B200000 0x00D00000>; + }; + partition@bf00000 { + label = "diag"; + reg = <0x0BF00000 0x00C00000>; + }; + partition@cb00000 { + label = "vendor"; + reg = <0x0CB00000 0x3500000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; + sttm@4C { + compatible = "adm,adm1032"; + reg = <0x4C>; + interrupt-parent = <&UIC1>; + interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */ + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + EMAC0: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts new file mode 100644 index 000000000..5db1bff6b --- /dev/null +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -0,0 +1,548 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <0x00c 0x002>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff791d>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460ex", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + }; + + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; + + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; + + USBOTG0: usbotg@bff80000 { + compatible = "amcc,dwc-otg"; + reg = <0x4 0xbff80000 0x10000>; + interrupt-parent = <&USBOTG0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupts = <0x0 0x1 0x2>; + interrupt-map = ; + }; + + AHBDMA: dma@bffd0800 { + compatible = "snps,dma-spear1340"; + reg = <4 0xbffd0800 0x400>; + interrupt-parent = <&UIC3>; + interrupts = <0x5 0x4>; + #dma-cells = <3>; + }; + + SATA0: sata@bffd1000 { + compatible = "amcc,sata-460ex"; + reg = <4 0xbffd1000 0x800>; + interrupt-parent = <&UIC3>; + interrupts = <0x0 0x4>; + dmas = <&AHBDMA 0 1 0>; + dma-names = "sata-dma"; + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + cpld@2,0 { + compatible = "amcc,ppc460ex-bcsr"; + reg = <2 0x0 0x9>; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + gpio-controller; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pcie@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000..ea6e76ae2 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts new file mode 100644 index 000000000..66cae7be6 --- /dev/null +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * CM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "schindler,cm5200"; + compatible = "schindler,cm5200"; + + soc5200@f0000000 { + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + status = "disabled"; + }; + + i2c@3d00 { + status = "disabled"; + }; + + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts new file mode 100644 index 000000000..aea8af810 --- /dev/null +++ b/arch/powerpc/boot/dts/currituck.dts @@ -0,0 +1,242 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2011 Tony Breeds IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,currituck"; + compatible = "ibm,currituck"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "okay"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x00000200 0x00000000 0x80000000 + 0x80000000 0x00000200 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + UART0: serial@10000000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000000 0x00000008>; + virtual-reg = <0xe1000000>; + clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART] + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <34 2>; + }; + + FPGA0: fpga@50000000 { + compatible = "ibm,currituck-fpga"; + reg = <0x50000000 0x4>; + }; + + IIC0: i2c@0 { + compatible = "ibm,iic-currituck", "ibm,iic"; + reg = <0x0 0x00000014>; + interrupt-parent = <&MPIC>; + interrupts = <79 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "st,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + }; + + PCIE0: pcie@10100000000 { // 4xGBIF1 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x80 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>; + }; + + PCIE1: pcie@30100000000 { // 4xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x60 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>; + }; + + PCIE2: pcie@38100000000 { // 2xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xA0 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>; + }; + + }; + + chosen { + stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts new file mode 100644 index 000000000..dfaf974c0 --- /dev/null +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Digsy MTC board Device Tree Source + * + * Copyright (C) 2009 Semihalf + * + * Based on the CM5200 by M. Balakowicz + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { gpio-controller; fsl,has-wdt; }; +&gpt1 { gpio-controller; }; + +/ { + model = "intercontrol,digsy-mtc"; + compatible = "intercontrol,digsy-mtc"; + + memory@0 { + reg = <0x00000000 0x02000000>; // 32MB + }; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + status = "disabled"; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d00 { + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + rtc@56 { + compatible = "microcrystal,rv3029"; + reg = <0x56>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3d40 { + status = "disabled"; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xff000000 0x1000000 + 4 0 0x60000000 0x0001000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x1000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00a00000>; + }; + partition@f00000 { + label = "u-boot"; + reg = <0x00f00000 0x100000>; + }; + }; + + can@4,0 { + compatible = "nxp,sja1000"; + reg = <4 0x000 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + can@4,100 { + compatible = "nxp,sja1000"; + reg = <4 0x100 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + serial@4,200 { + compatible = "nxp,sc28l92"; + reg = <4 0x200 0x10>; + interrupts = <1 3 3>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts new file mode 100644 index 000000000..5d11e6ea7 --- /dev/null +++ b/arch/powerpc/boot/dts/ebony.dts @@ -0,0 +1,337 @@ +/* + * Device Tree Source for IBM Ebony + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer , David Gibson + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,ebony"; + compatible = "ibm,ebony"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GP"; + reg = <0x00000000>; + clock-frequency = <0>; // Filled in by zImage + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gp", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gp", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; + // FIXME: anything else? + }; + + plb { + compatible = "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <0x010 0x002>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <0x020 0x008 0x00a 0x001>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; // Filled in by zImage + + EBC0: ebc { + compatible = "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; // Filled in by zImage + // ranges property is supplied by zImage + // based on firmware's configuration of the + // EBC bridge + interrupts = <0x5 0x4>; + interrupt-parent = <&UIC1>; + + small-flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0x00000000 0x00080000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0x00000000 0x00080000>; + read-only; + }; + }; + + nvram@1,0 { + /* NVRAM & RTC */ + compatible = "ds1743-nvram"; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; + }; + + large-flash@2,0 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0x00000002 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "fs"; + reg = <0x00000000 0x00380000>; + }; + partition@380000 { + label = "firmware"; + reg = <0x00380000 0x00080000>; + }; + }; + + ir@3,0 { + reg = <0x00000003 0x00000000 0x00000010>; + }; + + fpga@7,0 { + compatible = "Ebony-FPGA"; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xe8300000>; + }; + }; + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <0x40000700 0x00000020>; + }; + + ZMII0: emac-zmii@40000780 { + compatible = "ibm,zmii-440gp", "ibm,zmii"; + reg = <0x40000780 0x0000000c>; + }; + + EMAC0: ethernet@40000800 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <0x40000a00 0x000000d4>; + interrupt-parent = <&UIC0>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* Ebony has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8 + + /* IDSEL 3 */ + 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8 + + /* IDSEL 4 */ + 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8 + >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts new file mode 100644 index 000000000..7a1231d9d --- /dev/null +++ b/arch/powerpc/boot/dts/eiger.dts @@ -0,0 +1,427 @@ +/* + * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX) + * + * Copyright 2009 AMCC (AppliedMicro) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,eiger"; + compatible = "amcc,eiger"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + /* reg property is supplied in by U-Boot */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + /* reg property is supplied by U-boot */ + ccr = <0x00003000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "uboot-environment"; + reg = <0x00200000 0x00100000>; + }; + partition@300000 { + label = "linux"; + reg = <0x00300000 0x00300000>; + }; + partition@600000 { + label = "root-file-system"; + reg = <0x00600000 0x01900000>; + }; + partition@1f00000 { + label = "device-tree"; + reg = <0x01f00000 0x00020000>; + }; + partition@1f20000 { + label = "data"; + reg = <0x01f20000 0x060E0000>; + }; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <0>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <1>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef600920 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600920 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef600e50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600e50 0x00000030>; + }; + + TAH1: emac-tah@ef600f50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600f50 0x00000030>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600b00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600b00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600c00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef600d00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600d00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + }; + chosen { + stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts new file mode 100644 index 000000000..9ae2d92f5 --- /dev/null +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the Embedded Planet EP8248E board running PlanetCore. + * + * Copyright 2007 Freescale Semiconductor Inc. + */ + +/dts-v1/; +/ { + model = "EP8248E"; + compatible = "fsl,ep8248e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + planetcore-SMC1 = &smc1; + planetcore-SCC1 = &scc1; + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &smc1; + serial1 = &scc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8248@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8248-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfc000000 0x04000000 + 1 0 0xfa000000 0x00008000>; + + flash@0,3800000 { + compatible = "cfi-flash"; + reg = <0 0x3800000 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <2>; + #size-cells = <1>; + reg = <1 0 0x10>; + compatible = "fsl,ep8248e-bcsr"; + ranges; + + mdio { + compatible = "fsl,ep8248e-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1 8 1>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + reg = <1>; + }; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8248-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8248-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC1 */ + smc1: serial@11a80 { + device_type = "serial"; + compatible = "fsl,mpc8248-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a80 0x20 0x87fc 2>; + interrupts = <4 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <7>; + fsl,cpm-command = <0x1d000000>; + linux,planetcore-label = "SMC1"; + }; + + /* "Serial" port/SCC1 */ + scc1: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8248-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x00800000>; + linux,planetcore-label = "SCC1"; + }; + + eth0: ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x12000300>; + }; + + eth1: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8248-usb", + "fsl,cpm2-usb"; + reg = <0x11b60 0x18 0x8b00 0x100>; + interrupt-parent = <&PIC>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts new file mode 100644 index 000000000..b6b7e9787 --- /dev/null +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * EP88xC Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +/ { + model = "EP88xC"; + compatible = "fsl,ep88xc"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0x0 0x0 0xfc000000 0x4000000 + 0x3 0x0 0xfa000000 0x1000000 + >; + + flash@0,2000000 { + compatible = "cfi-flash"; + reg = <0x0 0x2000000 0x2000000>; + bank-width = <4>; + device-width = <2>; + }; + + board-control@3,400000 { + reg = <0x3 0x400000 0x10>; + compatible = "fsl,ep88xc-bcsr"; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfa200000 0x4000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <0x80 0x80>; + interrupt-parent = <&PIC>; + interrupts = <13 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <0x9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + // MON-1 + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + linux,planetcore-label = "SMC1"; + }; + + // SER-1 + serial@a20 { + device_type = "serial"; + compatible = "fsl,mpc885-scc-uart", + "fsl,cpm1-scc-uart"; + reg = <0xa20 0x20 0x3d00 0x80>; + interrupts = <29>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x40>; + linux,planetcore-label = "SCC2"; + }; + + usb@a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc885-usb", + "fsl,cpm1-usb"; + reg = <0xa00 0x18 0x1c00 0x80>; + interrupt-parent = <&CPM_PIC>; + interrupts = <30>; + fsl,cpm-command = <0000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile new file mode 100644 index 000000000..d2cc8e1f0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/Makefile @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 + +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) + +# MPC85xx platforms +dtb-$(CONFIG_BSC9131_RDB) += bsc9131rdb.dtb +dtb-$(CONFIG_BSC9132_QDS) += bsc9132qds.dtb +dtb-$(CONFIG_C293_PCIE) += c293pcie.dtb +dtb-$(CONFIG_MPC8536_DS) += mpc8536ds.dtb mpc8536ds_36b.dtb +dtb-$(CONFIG_MPC85xx_DS) += mpc8544ds.dtb mpc8572ds_camp_core0.dtb +dtb-$(CONFIG_MPC85xx_DS) += mpc8572ds_camp_core1.dtb mpc8572ds_36b.dtb +dtb-$(CONFIG_MPC85xx_DS) += mpc8572ds.dtb +dtb-$(CONFIG_MPC85xx_MDS) += mpc8568mds.dtb mpc8569mds.dtb p1021mds.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1020mbg-pc_32b.dtb p1020mbg-pc_36b.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb_36b.dtb p1020rdb.dtb p1020rdb-pc_32b.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb-pc_36b.dtb p1020rdb-pc_camp_core0.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb-pc_camp_core1.dtb p1020rdb-pd.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1020utm-pc_32b.dtb p1020utm-pc_36b.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1021rdb-pc_32b.dtb p1021rdb-pc_36b.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1024rdb_32b.dtb p1024rdb_36b.dtb p1025rdb_32b.dtb +dtb-$(CONFIG_MPC85xx_RDB) += p1025rdb_36b.dtb +dtb-$(CONFIG_P1010_RDB) += p1010rdb-pa_36b.dtb p1010rdb-pa.dtb +dtb-$(CONFIG_P1010_RDB) += p1010rdb-pb_36b.dtb p1010rdb-pb.dtb +dtb-$(CONFIG_P1022_DS) += p1022ds_32b.dtb p1022ds_36b.dtb +dtb-$(CONFIG_P1022_RDK) += p1022rdk.dtb +dtb-$(CONFIG_P1023_RDB) += p1023rdb.dtb +dtb-$(CONFIG_PPC_P2020) += p2020ds.dtb +dtb-$(CONFIG_TWR_P102x) += p1025twr.dtb +dtb-$(CONFIG_CORENET_GENERIC) += b4420qds.dtb b4860qds.dtb cyrus_p5020.dtb +dtb-$(CONFIG_CORENET_GENERIC) += kmcent2.dtb kmcoge4.dtb oca4080.dtb +dtb-$(CONFIG_CORENET_GENERIC) += p2041rdb.dtb p3041ds.dtb p4080ds.dtb +dtb-$(CONFIG_CORENET_GENERIC) += p5020ds.dtb p5040ds.dtb t1023rdb.dtb +dtb-$(CONFIG_CORENET_GENERIC) += t1024qds.dtb t1024rdb.dtb t1040d4rdb.dtb +dtb-$(CONFIG_CORENET_GENERIC) += t1040qds.dtb t1040rdb.dtb t1040rdb-rev-a.dtb +dtb-$(CONFIG_CORENET_GENERIC) += t1042d4rdb.dtb t1042qds.dtb t1042rdb.dtb +dtb-$(CONFIG_CORENET_GENERIC) += t1042rdb_pi.dtb t2080qds.dtb t2080rdb.dtb +dtb-$(CONFIG_CORENET_GENERIC) += t2081qds.dtb t4240qds.dtb t4240rdb.dtb +dtb-$(CONFIG_PPA8548) += ppa8548.dtb +dtb-$(CONFIG_GE_IMP3A) += ge_imp3a.dtb +dtb-$(CONFIG_MVME2500) += mvme2500.dtb + +# MPC86xx platforms +dtb-$(CONFIG_GEF_SBC310) += gef_sbc310.dtb +dtb-$(CONFIG_GEF_SBC610) += gef_sbc610.dtb +dtb-$(CONFIG_GEF_PPC9A) += gef_ppc9a.dtb +dtb-$(CONFIG_MVME7100) += mvme7100.dtb diff --git a/arch/powerpc/boot/dts/fsl/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts new file mode 100644 index 000000000..cd9203cee --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts @@ -0,0 +1,50 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/include/ "b4420si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4420QDS"; + compatible = "fsl,B4420QDS"; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis"; + }; + }; + +}; + +/include/ "b4420si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi new file mode 100644 index 000000000..f996cced4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -0,0 +1,97 @@ +/* + * B4420 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/include/ "b4si-post.dtsi" + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4"; +}; + +&dcsr { + dcsr-epu@0 { + compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu"; + }; + dcsr-npc { + compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc"; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa"; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn"; + }; + dcsr-nal@18000 { + compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal"; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm"; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; +}; + +&soc { + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4420-l3-cache-controller", "cache"; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0"; + }; + + global-utilities@e1000 { + compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen", + "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0"; + }; + + L2_1: l2-cache-controller@c20000 { + compatible = "fsl,b4420-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi new file mode 100644 index 000000000..bb7b9b9f3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -0,0 +1,85 @@ +/* + * B4420 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,B4420"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + usb0 = &usb0; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts new file mode 100644 index 000000000..a8bc41995 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts @@ -0,0 +1,117 @@ +/* + * B4860DS Device Tree Source + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "b4860si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4860QDS"; + compatible = "fsl,B4860QDS"; + + aliases { + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xaui_slot1 = &phy_xaui_slot1; + phy_xaui_slot2 = &phy_xaui_slot2; + }; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; + }; + }; + + soc@ffe000000 { + fman@400000 { + ethernet@e8000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xaui_slot1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_xaui_slot2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + status = "disabled"; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + status = "disabled"; + }; + }; + + mdio@fd000 { + phy_xaui_slot1: xaui-phy@slot1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x7>; + status = "disabled"; + }; + + phy_xaui_slot2: xaui-phy@slot2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + status = "disabled"; + }; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "b4860si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi new file mode 100644 index 000000000..868719821 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -0,0 +1,284 @@ +/* + * B4860 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "b4si-post.dtsi" + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4"; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 20>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + dcsr-epu@0 { + compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu"; + }; + dcsr-npc { + compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc"; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa"; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn"; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal"; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm"; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; + bman-portal@48000 { + compatible = "fsl,bman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <141 2 0 0>; + }; + bman-portal@4c000 { + compatible = "fsl,bman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <143 2 0 0>; + }; + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <145 2 0 0>; + }; + bman-portal@54000 { + compatible = "fsl,bman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <147 2 0 0>; + }; + bman-portal@58000 { + compatible = "fsl,bman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <149 2 0 0>; + }; + bman-portal@5c000 { + compatible = "fsl,bman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <151 2 0 0>; + }; + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <153 2 0 0>; + }; +}; + +&qportals { + qportal14: qman-portal@38000 { + compatible = "fsl,qman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <132 0x2 0 0>; + cell-index = <0xe>; + }; + qportal15: qman-portal@3c000 { + compatible = "fsl,qman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <134 0x2 0 0>; + cell-index = <0xf>; + }; + qportal16: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <136 0x2 0 0>; + cell-index = <0x10>; + }; + qportal17: qman-portal@44000 { + compatible = "fsl,qman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <138 0x2 0 0>; + cell-index = <0x11>; + }; + qportal18: qman-portal@48000 { + compatible = "fsl,qman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <140 0x2 0 0>; + cell-index = <0x12>; + }; + qportal19: qman-portal@4c000 { + compatible = "fsl,qman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <142 0x2 0 0>; + cell-index = <0x13>; + }; + qportal20: qman-portal@50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <144 0x2 0 0>; + cell-index = <0x14>; + }; + qportal21: qman-portal@54000 { + compatible = "fsl,qman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <146 0x2 0 0>; + cell-index = <0x15>; + }; + qportal22: qman-portal@58000 { + compatible = "fsl,qman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <148 0x2 0 0>; + cell-index = <0x16>; + }; + qportal23: qman-portal@5c000 { + compatible = "fsl,qman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <150 0x2 0 0>; + cell-index = <0x17>; + }; + qportal24: qman-portal@60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <152 0x2 0 0>; + cell-index = <0x18>; + }; +}; + +&soc { + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 9>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4860-l3-cache-controller", "cache"; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0"; + }; + + global-utilities@e1000 { + compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen", + "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0"; + }; + +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + }; + + L2_1: l2-cache-controller@c20000 { + compatible = "fsl,b4860-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi new file mode 100644 index 000000000..388ba1b15 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -0,0 +1,104 @@ +/* + * B4860 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,B4860"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + usb0 = &usb0; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi new file mode 100644 index 000000000..05be919f3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi @@ -0,0 +1,280 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/ { + model = "fsl,B4QDS"; + compatible = "fsl,B4QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + crypto = &crypto; + phy_sgmii_10 = &phy_sgmii_10; + phy_sgmii_11 = &phy_sgmii_11; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@c00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01052000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + sdhc@114000 { + /*Disabled as there is no sdhc connector on B4420QDS board*/ + status = "disabled"; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "atmel,24c256"; + reg = <0x51>; + }; + eeprom@53 { + compatible = "atmel,24c256"; + reg = <0x53>; + }; + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + usb@210000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_10>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_11>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_10: ethernet-phy@10 { + reg = <0x10>; + }; + + phy_sgmii_11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + status = "disabled"; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + status = "disabled"; + }; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "b4si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi new file mode 100644 index 000000000..fb3200b00 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -0,0 +1,487 @@ +/* + * B4420 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <116 0x2 0 0>; + cell-index = <0x6>; + }; + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <118 0x2 0 0>; + cell-index = <0x7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <120 0x2 0 0>; + cell-index = <0x8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <122 0x2 0 0>; + cell-index = <0x9>; + }; + qportal10: qman-portal@28000 { + compatible = "fsl,qman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <124 0x2 0 0>; + cell-index = <0xa>; + }; + qportal11: qman-portal@2c000 { + compatible = "fsl,qman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <126 0x2 0 0>; + cell-index = <0xb>; + }; + qportal12: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <128 0x2 0 0>; + cell-index = <0xc>; + }; + qportal13: qman-portal@34000 { + compatible = "fsl,qman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <130 0x2 0 0>; + cell-index = <0xd>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 2>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 8>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 4>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 0>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + fsl,portid-mapping = <0x8000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 1>; + + + /* PCIe, DMA, SRIO */ + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <8 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* AXI2, Maple */ + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* Q/BMan */ + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* AXI1, FMAN */ + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,b4-device-config"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qonverge-usb2-dr-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-sec5.3-0.dtsi" + +/include/ "qoriq-qman3.dtsi" + qman: qman@318000 { + interrupts = <16 2 1 28>; + }; + +/include/ "qoriq-bman1.dtsi" + bman: bman@31a000 { + interrupts = <16 2 1 29>; + }; + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + interrupts = <96 2 0 0>, <16 2 1 30>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x80000>; + }; + + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts new file mode 100644 index 000000000..0ba86a6dc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BSC9131 RDB Device Tree Source + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + */ + +/include/ "bsc9131si-pre.dtsi" + +/ { + model = "fsl,bsc9131rdb"; + compatible = "fsl,bsc9131rdb"; + + memory { + device_type = "memory"; + }; + + board_ifc: ifc: memory-controller@ff71e000 { + /* NAND Flash on board */ + ranges = <0x0 0x0 0x0 0xff800000 0x00004000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + board_soc: soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9131rdb.dtsi" +/include/ "bsc9131si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi new file mode 100644 index 000000000..53f8b9563 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi @@ -0,0 +1,104 @@ +/* + * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x0 0x0 0x4000>; + + }; +}; + +&board_soc { + /* BSC9131RDB does not have any device on i2c@3100 */ + i2c@3100 { + status = "disabled"; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + + sdhc@2e000 { + status = "disabled"; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi new file mode 100644 index 000000000..5c53cee87 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi @@ -0,0 +1,189 @@ +/* + * BSC9131 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <16 2 0 0 20 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9131-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9131-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9131-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9131-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" + +timer@41100 { + compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 + 0xb1 2 + 0xb2 2 + 0xb3 2>; +}; + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9131-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi new file mode 100644 index 000000000..f6ec4a675 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi @@ -0,0 +1,62 @@ +/* + * BSC9131 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,BSC9131"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,BSC9131@0 { + device_type = "cpu"; + compatible = "fsl,e500v2"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts new file mode 100644 index 000000000..ce642e879 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BSC9132 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + */ + +/include/ "bsc9132si-pre.dtsi" + +/ { + model = "fsl,bsc9132qds"; + compatible = "fsl,bsc9132qds"; + + memory { + device_type = "memory"; + }; + + ifc: memory-controller@ff71e000 { + /* NOR, NAND Flash on board */ + ranges = <0x0 0x0 0x0 0x88000000 0x08000000 + 0x1 0x0 0x0 0xff800000 0x00010000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; + + pci0: pcie@ff70a000 { + reg = <0 0xff70a000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x90000000 + 0x2000000 0x0 0x90000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "bsc9132qds.dtsi" +/include/ "bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi new file mode 100644 index 000000000..fead484a8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi @@ -0,0 +1,113 @@ +/* + * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x4000>; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + }; + }; + + i2c@3000 { + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x1f>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi new file mode 100644 index 000000000..4da451e00 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -0,0 +1,209 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + /* FIXME: Test whether interrupts are split */ + interrupts = <16 2 0 0 20 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9132-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9132-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9132-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 1 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9132-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi new file mode 100644 index 000000000..90f7949fe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + cpu1: PowerPC,e500v2@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts new file mode 100644 index 000000000..e2fdac2ed --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -0,0 +1,224 @@ +/* + * C293 PCIE Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "c293si-pre.dtsi" + +/ { + model = "fsl,C293PCIE"; + compatible = "fsl,C293PCIE"; + + memory { + device_type = "memory"; + }; + + ifc: memory-controller@fffe1e000 { + reg = <0xf 0xffe1e000 0 0x2000>; + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x2 0x0 0xf 0xffdf0000 0x00010000>; + + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 1MB for DTB Image */ + reg = <0x0 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@100000 { + /* 8 MB for Linux Kernel Image */ + reg = <0x00100000 0x00800000>; + label = "NOR Linux Kernel Image"; + }; + + partition@900000 { + /* 53MB for rootfs */ + reg = <0x00900000 0x03500000>; + label = "NOR Rootfs Image"; + }; + + partition@3e00000 { + /* 1MB for blob encrypted key */ + reg = <0x03e00000 0x00100000>; + label = "NOR blob encrypted key"; + }; + + partition@3f00000 { + /* 512KB for u-boot Bootloader Image and evn */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 16MB for Linux Kernel Image */ + reg = <0x00200000 0x01000000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1200000 { + /* 4078MB for Root file System Image */ + reg = <0x00600000 0xfee00000>; + label = "NAND RFS Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,c293pcie-cpld"; + reg = <0x2 0x0 0x20>; + }; +}; + +&soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c1024", "atmel,24c1024"; + reg = <0x50>; + }; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 10.5MB for RFS Image */ + reg = <0x00580000 0x00a80000>; + label = "SPI Flash RFS Image"; + }; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; +/include/ "c293si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi new file mode 100644 index 000000000..2d443d519 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi @@ -0,0 +1,189 @@ +/* + * C293 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,c293-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,c293-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" + L2: l2-cache-controller@20000 { + compatible = "fsl,c293-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,c293-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + + crypto@80000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@80000 { + reg = <0x80000 0x20000>; + ranges = <0x0 0x80000 0x20000>; + + jr@1000 { + interrupts = <45 2 0 0>; + }; + jr@2000 { + interrupts = <57 2 0 0>; + }; + }; + + crypto@a0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0x0 0xa0000 0x20000>; + + jr@1000 { + interrupts = <49 2 0 0>; + }; + jr@2000 { + interrupts = <50 2 0 0>; + }; + }; + + crypto@c0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@c0000 { + reg = <0xc0000 0x20000>; + ranges = <0x0 0xc0000 0x20000>; + + jr@1000 { + interrupts = <55 2 0 0>; + }; + jr@2000 { + interrupts = <56 2 0 0>; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + reg = <0x10000 0x1000>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + reg = <0x11000 0x1000>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,c293-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi new file mode 100644 index 000000000..065049d76 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * C293 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,C293"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts new file mode 100644 index 000000000..40ba0606e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Cyrus 5020 Device Tree Source, based on p5020ds.dts + * + * Copyright 2015 Andy Fleming + * + * p5020ds.dts copyright: + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + */ + +/include/ "p5020si-pre.dtsi" + +/ { + model = "varisys,CYRUS"; + compatible = "varisys,CYRUS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + }; + + i2c@118100 { + }; + + i2c@119100 { + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi new file mode 100644 index 000000000..ea145c91c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi @@ -0,0 +1,59 @@ +/* + * e500mc Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi new file mode 100644 index 000000000..7e2a90cde --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi @@ -0,0 +1,51 @@ +/* + * e500v1 Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.03"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-ecl; // Embedded Cache Locking + power-isa-mmc; // Memory Coherence + power-isa-sp; // Signal Processing Engine + power-isa-sp.fs; // SPE.Embedded Float Scalar Single + power-isa-sp.fv; // SPE.Embedded Float Vector + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi new file mode 100644 index 000000000..f4928144d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi @@ -0,0 +1,52 @@ +/* + * e500v2 Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.03"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-ecl; // Embedded Cache Locking + power-isa-mmc; // Memory Coherence + power-isa-sp; // Signal Processing Engine + power-isa-sp.fd; // SPE.Embedded Float Scalar Double + power-isa-sp.fs; // SPE.Embedded Float Scalar Single + power-isa-sp.fv; // SPE.Embedded Float Vector + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi new file mode 100644 index 000000000..c254c981a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi @@ -0,0 +1,60 @@ +/* + * e5500 Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + power-isa-64; // 64-bit + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi new file mode 100644 index 000000000..a912dbeff --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi @@ -0,0 +1,65 @@ +/* + * e6500 Power ISA Device Tree Source (include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + power-isa-64; // 64-bit + power-isa-e.pt; // Embedded.Page Table + power-isa-e.hv.lrat; // Embedded.Hypervisor.LRAT + power-isa-e.em; // Embedded Multi-Threading + power-isa-v; // Vector (AltiVec) + fsl,eref-er; // Enhanced Reservations (Load and Reserve and Store Cond.) + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi new file mode 100644 index 000000000..3c210e0d5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x100300 0x4>, + <0x100600 0x4>; + ranges = <0x0 0x100100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <31 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <76 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <77 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <78 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi new file mode 100644 index 000000000..cccf3bb38 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x101300 0x4>, + <0x101600 0x4>; + ranges = <0x0 0x101100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <35 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <80 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <81 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <82 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <83 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi new file mode 100644 index 000000000..d3cc8d0f7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma2: dma@102300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x102300 0x4>, + <0x102600 0x4>; + ranges = <0x0 0x102100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <464 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <465 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <466 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <467 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <468 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <469 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <470 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <471 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts new file mode 100644 index 000000000..9e5c01cfa --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + watchdog@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + watchdog@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts new file mode 100644 index 000000000..48a81430a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GE PPC9A Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_PPC9A"; + compatible = "gef,ppc9a"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,ppc9a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,ppc9a-fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + watchdog@4,2000 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + watchdog@4,2010 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + + pci1: pcie@fef09000 { + status = "disabled"; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts new file mode 100644 index 000000000..8eb254b17 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GE SBC310 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_SBC310"; + compatible = "gef,sbc310"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe0000000 0x08000000 // Paged Flash 0 + 2 0 0xe8000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00010000>; // FPGA + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x01000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc310-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + watchdog@4,2000 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; +/* + watchdog@4,2010 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; +*/ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@4,8000 { + #gpio-cells = <2>; + compatible = "gef,sbc310-gpio"; + reg = <0x4 0x8000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + }; + + i2c@3100 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 + >; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0xfef09000 0x1000>; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; + + pcie@0 { + ranges = <0x02000000 0x0 0xc0000000 + 0x02000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts new file mode 100644 index 000000000..02edbb262 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GE SBC610 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_SBC610"; + compatible = "gef,sbc610"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc610-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc610-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + watchdog@4,2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + watchdog@4,2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + + pci1: pcie@fef09000 { + status = "disabled"; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts new file mode 100644 index 000000000..8e7f0828a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS + * + * (C) Copyright 2016 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + */ + +/include/ "t104xsi-pre.dtsi" + +/ { + model = "keymile,kmcent2"; + compatible = "keymile,kmcent2"; + + aliases { + front_phy = &front_phy; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x04000000 + 1 0 0xf 0xfa000000 0x00010000 + 2 0 0xf 0xfb000000 0x00010000 + 4 0 0xf 0xc0000000 0x08000000 + 6 0 0xf 0xd0000000 0x08000000 + 7 0 0xf 0xd8000000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + board-control@2,0 { + compatible = "keymile,qriox"; + reg = <0x2 0x0 0x80>; + }; + + chassis-mgmt@6,0 { + compatible = "keymile,bfticu"; + reg = <6 0 0x100>; + interrupt-controller; + interrupt-parent = <&mpic>; + interrupts = <11 1 0 0>; + #interrupt-cells = <1>; + }; + + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + network-clock@1 { + compatible = "zarlink,zl30364"; + reg = <1>; + spi-max-frequency = <1000000>; + }; + }; + + sdhc@114000 { + status = "disabled"; + }; + + i2c@118000 { + clock-frequency = <100000>; + + mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + pagesize = <2>; + read-only; + label = "ddr3-spd"; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + label = "SENSOR_0"; + }; + temp-sensor@4a { + compatible = "national,lm75"; + reg = <0x4a>; + label = "SENSOR_2"; + }; + temp-sensor@4b { + compatible = "national,lm75"; + reg = <0x4b>; + label = "SENSOR_3"; + }; + }; + }; + }; + + i2c@118100 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + serial2: serial@11d500 { + status = "disabled"; + }; + + serial3: serial@11d600 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + usb1: usb@211000 { + status = "disabled"; + }; + + display@180000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + sata@221000 { + status = "disabled"; + }; + + fman@400000 { + ethernet@e0000 { + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@e2000 { + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@e4000 { + status = "disabled"; + }; + + ethernet@e6000 { + status = "disabled"; + }; + + ethernet@e8000 { + phy-handle = <&front_phy>; + phy-mode = "rgmii-id"; + }; + + mdio0: mdio@fc000 { + front_phy: ethernet-phy@11 { + reg = <0x11>; + }; + }; + }; + }; + + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + status = "disabled"; + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + status = "disabled"; + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + status = "disabled"; + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + device_type = "hdlc"; + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk9"; + tx-clock-name = "clk9"; + fsl,hdlc-bus; + }; + }; +}; + +#include "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts new file mode 100644 index 000000000..1c5f94231 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS + * + * (C) Copyright 2014 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2011 Freescale Semiconductor Inc. + */ + +/include/ "p2041si-pre.dtsi" + +/ { + model = "keymile,kmcoge4"; + compatible = "keymile,kmcoge4", "keymile,kmp204x"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl256s1", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; /* input clock */ + }; + + network_clock@1 { + compatible = "zarlink,zl30343"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p32", "jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <15000000>; + }; + }; + + sdhc@114000 { + status = "disabled"; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + + sata@221000 { + status = "disabled"; + }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + mdio0: mdio@e1120 { + front_phy: ethernet-phy@11 { + reg = <0x11>; + }; + }; + + enet1: ethernet@e2000 { + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + enet2: ethernet@e4000 { + status = "disabled"; + }; + + enet3: ethernet@e6000 { + status = "disabled"; + }; + enet4: ethernet@e8000 { + phy-handle = <&front_phy>; + phy-connection-type = "rgmii"; + }; + enet5: ethernet@f0000 { + status = "disabled"; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + status = "disabled"; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */ + 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */ + 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */ + 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */ + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0 0 0x40000>; + }; + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts new file mode 100644 index 000000000..ab6997a0f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8536 DS Device Tree Source + * + * Copyright 2008, 2011 Freescale Semiconductor, Inc. + */ + +/include/ "mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + pci0: pci@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x98000000 + 0x02000000 0 0x98000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x90000000 + 0x02000000 0 0x90000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe0b000 { + reg = <0 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi new file mode 100644 index 000000000..a925fe49a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi @@ -0,0 +1,244 @@ +/* + * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,mpc8536ds-fpga-pixis"; + reg = <0x3 0x0 0x8000>; + }; +}; + +&board_soc { + i2c@3100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 0x1 0 0>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 0x1 0 0>; + reg = <1>; + }; + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + usb@2b000 { + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts new file mode 100644 index 000000000..1b799741c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8536DS Device Tree Source (36-bit address map) + * + * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc. + */ + +/include/ "mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pci@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@fffe0b000 { + reg = <0xf 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi new file mode 100644 index 000000000..fba40a1bc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -0,0 +1,262 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8536-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + /* mark compat w/8572 to get some erratum treatment */ + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio"; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; + }; +/include/ "pq3-etsec1-timer-0.dtsi" + + usb@22000 { + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; + }; + + usb@23000 { + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; + }; + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-2.dtsi" + enet2: ethernet@26000 { + cell-index = <1>; + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec3_clk>; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <60 0x2 0 0>; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + }; + +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8536-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" + power@e0070 { + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi new file mode 100644 index 000000000..152906f98 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8536"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts new file mode 100644 index 000000000..f4a8b7139 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8544 DS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + */ + +/include/ "mpc8544si-pre.dtsi" + +/ { + model = "MPC8544DS"; + compatible = "MPC8544DS", "MPC85xxDS"; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff800000 0x800000>; + }; + + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + }; + + pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 J16 Slot 2 */ + + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; + }; + + pci1: pcie@e0009000 { + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi new file mode 100644 index 000000000..47d986b04 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi @@ -0,0 +1,207 @@ +/* + * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "dtb-nor"; + }; + + partition@20000 { + reg = <0x20000 0x30000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x200000>; + label = "dink-nor"; + read-only; + }; + + partition@400000 { + reg = <0x400000 0x380000>; + label = "kernel-nor"; + }; + + partition@780000 { + reg = <0x780000 0x80000>; + label = "u-boot-nor"; + read-only; + }; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci3 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi new file mode 100644 index 000000000..ea7416af7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -0,0 +1,193 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8544-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8544-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi new file mode 100644 index 000000000..5a69bafb6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8544"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi new file mode 100644 index 000000000..dddb73745 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -0,0 +1,161 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <25 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8548-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi new file mode 100644 index 000000000..fc1ce9774 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts new file mode 100644 index 000000000..3603b5ae1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + */ + +/include/ "mpc8568si-pre.dtsi" + +/ { + model = "MPC8568EMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; + + aliases { + pci0 = &pci0; + pci1 = &pci1; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + ranges = <0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0xf8000000 0x00008000 + 0x2 0x0 0xf0000000 0x04000000 + 0x4 0x0 0xf8008000 0x00008000 + 0x5 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr5: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8568mds-bcsr-gpio"; + reg = <0x5 0x1>; + gpio-controller; + }; + }; + + pib@4,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc8568@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + }; + + mdio@24520 { + phy0: ethernet-phy@7 { + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x00000040>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + par_io@e0100 { + num-ports = <7>; + + pio1: ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ + }; + + pio2: ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + mode = "cpu"; + }; + + spi@500 { + mode = "cpu"; + }; + + enet2: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + qe_phy0: ethernet-phy@7 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + }; + + pci0: pci@e0008000 { + reg = <0x0 0xe0008000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 + + /* IDSEL 0x13 AD19 */ + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; + reg = <0x0 0xe000a000 0x0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + gpios = <&bcsr5 1 0>; + }; + + amber { + gpios = <&bcsr5 2 0>; + }; + + red { + gpios = <&bcsr5 3 0>; + }; + }; +}; + +/include/ "mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi new file mode 100644 index 000000000..64e7075a9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi @@ -0,0 +1,270 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + sleep = <&pmc 0x80000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8568-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8568-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8568-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8568-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + dma@21300 { + sleep = <&pmc 0x00000400>; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + sleep = <&pmc 0x00000080>; + }; + +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + sleep = <&pmc 0x00000040>; + }; + + par_io@e0100 { + reg = <0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec2.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x10000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi new file mode 100644 index 000000000..122ca3bd0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8568"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts new file mode 100644 index 000000000..206614ea2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts @@ -0,0 +1,443 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8569E MDS Device Tree Source + * + * Copyright (C) 2009 Freescale Semiconductor Inc. + */ + +/include/ "mpc8569si-pre.dtsi" + +/ { + model = "MPC8569EMDS"; + compatible = "fsl,MPC8569EMDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet5 = &enet5; + ethernet7 = &enet7; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf0000000 0x04000000 + 0x3 0x0 0x0 0xfc000000 0x00008000 + 0x4 0x0 0x0 0xf8008000 0x00008000 + 0x5 0x0 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partition@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; + }; + + nand@3,0 { + compatible = "fsl,mpc8569-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0 0x8000>; + }; + + pib@4,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + sdhc@2e000 { + status = "disabled"; + sdhci,1-bit-only; + bus-width = <1>; + }; + + par_io@e0100 { + num-ports = <7>; + + qe_pio_e: gpio-controller@80 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x80 0x18>; + gpio-controller; + }; + + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + + pio1: ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */ + 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */ + }; + + pio2: ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */ + 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */ + 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */ + 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */ + 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */ + 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */ + 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */ + 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */ + 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */ + 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */ + 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */ + 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */ + }; + + pio3: ucc_pin@3 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */ + 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */ + 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */ + 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */ + 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */ + 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */ + 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */ + 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */ + 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */ + 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */ + 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */ + 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */ + }; + + pio4: ucc_pin@4 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */ + 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */ + 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */ + 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */ + 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */ + 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */ + 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */ + 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */ + 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */ + 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */ + 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */ + 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + gpios = <&qe_pio_e 30 0>; + mode = "cpu-qe"; + + serial-flash@0 { + compatible = "st,m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + }; + + spi@500 { + mode = "cpu"; + }; + + usb@6c0 { + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio1>; + tbi-handle = <&tbi1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + qe_phy0: ethernet-phy@7 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x3>; + }; + qe_phy5: ethernet-phy@4 { + reg = <0x04>; + }; + qe_phy7: ethernet-phy@6 { + reg = <0x6>; + }; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + mdio@3520 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3520 0x18>; + compatible = "fsl,ucc-mdio"; + + tbi6: tbi-phy@15 { + reg = <0x15>; + device_type = "tbi-phy"; + }; + }; + mdio@3720 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3720 0x38>; + compatible = "fsl,ucc-mdio"; + tbi8: tbi-phy@17 { + reg = <0x17>; + device_type = "tbi-phy"; + }; + }; + + enet2: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio3>; + tbi-handle = <&tbi3>; + phy-handle = <&qe_phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio2>; + tbi-handle = <&tbi2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio4>; + tbi-handle = <&tbi4>; + phy-handle = <&qe_phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi4: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet5: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi6>; + phy-handle = <&qe_phy5>; + phy-connection-type = "sgmii"; + }; + + enet7: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi8>; + phy-handle = <&qe_phy7>; + phy-connection-type = "sgmii"; + }; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + port2 { + status = "disabled"; + }; + }; +}; + +/include/ "mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi new file mode 100644 index 000000000..3e6346a4a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi @@ -0,0 +1,304 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8569-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8569-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8569-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8569-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sleep = <&pmc 0x00200000>; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x100>; + ranges = <0x0 0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec3.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8569-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <4>; + fsl,qe-num-snums = <46>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + ucc@3200 { + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + }; + + ucc@3400 { + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + }; + + ucc@3600 { + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x20000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x20000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi new file mode 100644 index 000000000..2cd15a2a0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8569"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8569@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts new file mode 100644 index 000000000..679d53c4a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + */ + +/include/ "mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi new file mode 100644 index 000000000..357490bb8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi @@ -0,0 +1,428 @@ +/* + * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00060000>; + label = "dtb-nor"; + }; + + partition@7f60000 { + reg = <0x07f60000 0x00020000>; + label = "env-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <0x3>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <7 1 0 0>; + reg = <0x1e>; + }; + sgmii_phy3: sgmii-phy@3 { + interrupts = <7 1 0 0>; + reg = <0x1f>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts new file mode 100644 index 000000000..f2abce2bb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8572DS Device Tree Source (36-bit address map) + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + */ + +/include/ "mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000 + 0x4 0x0 0xf 0xffa40000 0x00040000 + 0x5 0x0 0xf 0xffa80000 0x00040000 + 0x6 0x0 0xf 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts new file mode 100644 index 000000000..d1a4993ca --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8572 DS Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0, + * eth1, crypto, pci0, pci1. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + }; + PowerPC,8572@1 { + status = "disabled"; + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + serial@4600 { + status = "disabled"; + }; + dma@c300 { + status = "disabled"; + }; + gpio-controller@f000 { + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + ethernet@26000 { + status = "disabled"; + }; + mdio@26520 { + status = "disabled"; + }; + ethernet@27000 { + status = "disabled"; + }; + mdio@27520 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 31 32 33 37 38 39 /* enet2 enet3 */ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ + 0xe4 0xe5 0xe6 0xe7 /* msi */ + >; + }; + + msi@41600 { + msi-available-ranges = <0 0x80>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0>; + }; + timer@42100 { + status = "disabled"; + }; + }; + pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts new file mode 100644 index 000000000..63e8243ff --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8572 DS Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + status = "disabled"; + }; + PowerPC,8572@1 { + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + ecm@1000 { + status = "disabled"; + }; + memory-controller@2000 { + status = "disabled"; + }; + memory-controller@6000 { + status = "disabled"; + }; + i2c@3000 { + status = "disabled"; + }; + i2c@3100 { + status = "disabled"; + }; + serial@4500 { + status = "disabled"; + }; + gpio-controller@f000 { + status = "disabled"; + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + dma@21300 { + status = "disabled"; + }; + ethernet@24000 { + status = "disabled"; + }; + ptp_clock@24e00 { + status = "disabled"; + }; + ethernet@25000 { + status = "disabled"; + }; + mdio@25520 { + status = "disabled"; + }; + crypto@30000 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ + 29 30 34 35 36 40 /* enet0 enet1 */ + 24 25 20 21 22 23 /* pci0 pci1 dma1 */ + 43 /* i2c */ + 0x1 0x2 0x3 0x4 /* pci slot */ + 0x9 0xa 0xb 0xc /* usb */ + 0x6 0x7 0xe 0x5 /* Audio elgacy SATA */ + 0xe0 0xe1 0xe2 0xe3 /* msi */ + >; + }; + timer@41100 { + status = "disabled"; + }; + msi@41600 { + msi-available-ranges = <0x80 0x80>; + interrupts = < + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + global-utilities@e0000 { + status = "disabled"; + }; + }; + pcie@ffe08000 { + status = "disabled"; + }; + pcie@ffe09000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi new file mode 100644 index 000000000..40a6cff77 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -0,0 +1,198 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio"; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2,1M + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi new file mode 100644 index 000000000..28c2a862b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi @@ -0,0 +1,73 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi new file mode 100644 index 000000000..77900b924 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8641 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8641-soc", "simple-bus"; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + serial@4600 { + interrupts = <28 2 0 0>; + }; +/include/ "pq3-dma-0.dtsi" + dma@21300 { + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + }; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-2.dtsi" + ethernet@26000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-3.dtsi" + ethernet@27000 { + model = "TSEC"; + }; + +/include/ "qoriq-mpic.dtsi" + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + msi@41800 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + msi@41a00 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +&pci0 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <100000000>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&pci1 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0x0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi new file mode 100644 index 000000000..a9f7e79d3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8641 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpic>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts new file mode 100644 index 000000000..e0f048a03 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device tree source for the Emerson/Artesyn MVME2500 + * + * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "MVME2500"; + compatible = "artesyn,MVME2500"; + + aliases { + serial2 = &serial2; + serial3 = &serial3; + serial4 = &serial4; + serial5 = &serial5; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + + i2c@3000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <8 1 0 0>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + }; + + spi0: spi@7000 { + fsl,espi-num-chipselects = <2>; + + flash@0 { + compatible = "atmel,at25df641", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + flash@1 { + compatible = "atmel,at25df641", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <10000000>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy1: ethernet-phy@1 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + compatible = "brcm,bcm54616S"; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + + phy7: ethernet-phy@7 { + compatible = "brcm,bcm54616S"; + interrupts = <7 1 0 0>; + reg = <0x7>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy7>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfff00000 0x00080000 + 0x1 0x0 0x0 0xffc40000 0x00010000 + 0x2 0x0 0x0 0xffc50000 0x00010000 + 0x3 0x0 0x0 0xffc60000 0x00010000 + 0x4 0x0 0x0 0xffc70000 0x00010000 + 0x6 0x0 0x0 0xffc80000 0x00010000 + 0x5 0x0 0x0 0xffdf0000 0x00008000>; + + serial2: serial@1,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x1 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <11 2 0 0>; + }; + + serial3: serial@2,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x2 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <1 2 0 0>; + }; + + serial4: serial@3,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x3 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <2 2 0 0>; + }; + + serial5: serial@4,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <3 2 0 0>; + }; + + mram@0,0 { + compatible = "everspin,mram", "mtd-ram"; + reg = <0x0 0x0 0x80000>; + bank-width = <2>; + }; + + board-control@5,0 { + compatible = "artesyn,mvme2500-fpga"; + reg = <0x5 0x0 0x01000>; + }; + + cpld@6,0 { + compatible = "artesyn,mvme2500-cpld"; + reg = <0x6 0x0 0x10000>; + interrupts = <9 1 0 0>; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" + +/ { + soc@ffe00000 { + serial@4600 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + non-removable; + }; + + }; + +}; diff --git a/arch/powerpc/boot/dts/fsl/mvme7100.dts b/arch/powerpc/boot/dts/fsl/mvme7100.dts new file mode 100644 index 000000000..bcc9dedd6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mvme7100.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device tree source for the Emerson/Artesyn MVME7100 + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + * + * Author: Alessio Igor Bogani + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "MVME7100"; + compatible = "artesyn,MVME7100"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + soc: soc@f1000000 { + ranges = <0x00000000 0xf1000000 0x00100000>; + + i2c@3000 { + hwmon@4c { + compatible = "dallas,max6649"; + reg = <0x4c>; + }; + + rtc@68 { + status = "disabled"; + }; + }; + + + enet0: ethernet@24000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@1 { + reg = <1>; + }; + phy1: ethernet-phy@2 { + reg = <2>; + }; + phy2: ethernet-phy@3 { + reg = <3>; + }; + phy3: ethernet-phy@4 { + reg = <4>; + }; + }; + + enet1: ethernet@25000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + status = "disabled"; + }; + + serial1: serial@4600 { + status = "disabled"; + }; + }; + + lbc: localbus@f1005000 { + reg = <0xf1005000 0x1000>; + + ranges = <0 0 0xf8000000 0x08000000 // NOR Flash (128MB) + 2 0 0xf2030000 0x00010000 // NAND Flash (8GB) + 3 0 0xf2400000 0x00080000 // MRAM (512KB) + 4 0 0xf2000000 0x00010000 // BCSR + 5 0 0xf2010000 0x00010000>; // QUART + + bcsr@4,0 { + compatible = "artesyn,mvme7100-bcsr"; + reg = <4 0 0x10000>; + }; + + serial@5,1000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <5 0x1000 0x100>; + clock-frequency = <1843200>; + interrupts = <11 1 0 0>; + }; + + serial@5,2000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <5 0x2000 0x100>; + clock-frequency = <1843200>; + interrupts = <11 1 0 0>; + }; + + serial@5,3000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <5 0x3000 0x100>; + clock-frequency = <1843200>; + interrupts = <11 1 0 0>; + }; + + serial@5,4000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <5 0x4000 0x100>; + clock-frequency = <1843200>; + interrupts = <11 1 0 0>; + }; + }; + + pci0: pcie@f1008000 { + status = "disabled"; + }; + + pci1: pcie@f1009000 { + status = "disabled"; + }; + + chosen { + stdout-path = &serial0; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts new file mode 100644 index 000000000..17bc6f391 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/oca4080.dts @@ -0,0 +1,145 @@ +/* + * OCA4080 Device Tree Source + * + * Copyright 2014 Prodrive Technologies B.V. + * + * Based on: + * P4080DS Device Tree Source + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p4080si-pre.dtsi" + +/ { + model = "fsl,OCA4080"; + compatible = "fsl,OCA4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + i2c@118000 { + status = "disabled"; + }; + + i2c@118100 { + status = "disabled"; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xef800000 0x800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + status = "disabled"; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + status = "disabled"; + }; +}; + +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts new file mode 100644 index 000000000..1e33d78d8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi new file mode 100644 index 000000000..434fb2d58 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts new file mode 100644 index 000000000..03bd76ca8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts @@ -0,0 +1,46 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts new file mode 100644 index 000000000..ce3346d77 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts new file mode 100644 index 000000000..83590354f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts @@ -0,0 +1,74 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi new file mode 100644 index 000000000..ef49a7d6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -0,0 +1,217 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + ifc_nand: nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c256", "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + i2c@3100 { + eeprom@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + tbi-phy@3 { + device_type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi new file mode 100644 index 000000000..583a6cd05 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: memory-controller@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi new file mode 100644 index 000000000..4d41efe00 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: memory-controller@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi new file mode 100644 index 000000000..2d2550729 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -0,0 +1,205 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <16 2 0 0 19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1010-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1010-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1010-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + fsl,i2c-erratum-a004447; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + fsl,i2c-erratum-a004447; + }; + +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2 0 0>; + big-endian; + }; + + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1d000 0x1000>; + interrupts = <61 0x2 0 0>; + big-endian; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1010-l2-cache-controller", + "fsl,p1014-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1010-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec4.4-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" +/include/ "pq3-etsec2-1.dtsi" +/include/ "pq3-etsec2-2.dtsi" + + enet0: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; + }; + + enet1: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + + enet2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1010-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi new file mode 100644 index 000000000..6e76f9b28 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1010"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + can0 = &can0; + can1 = &can1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1010@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi new file mode 100644 index 000000000..a24699cfe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi @@ -0,0 +1,151 @@ +/* + * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts new file mode 100644 index 000000000..b29d1fcb5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts new file mode 100644 index 000000000..678d0eec2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi new file mode 100644 index 000000000..a13876c05 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts new file mode 100644 index 000000000..8175bf6f3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts new file mode 100644 index 000000000..01c305795 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts new file mode 100644 index 000000000..42e1e2fc0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts new file mode 100644 index 000000000..da9a8e73b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts new file mode 100644 index 000000000..f2dc6c09b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts @@ -0,0 +1,292 @@ +/* + * P1020 RDB-PD Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PD"; + compatible = "fsl,P1020RDB-PD"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR, NAND flash, L2 switch and CPLD */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffa00000 0x00020000 + 0x3 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 122MB for File System Image */ + reg = <0x00600000 0x07a00000>; + label = "NAND File System Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,p1020rdb-pd-cpld"; + reg = <0x2 0x0 0x20000>; + }; + + L2switch@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x3 0x0 0x20000>; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + /* input clock */ + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 11MB for FS System Image */ + reg = <0x00500000 0x00b00000>; + label = "SPI File System Image"; + }; + }; + + slic@0 { + compatible = "zarlink,le88266"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + slic@1 { + compatible = "zarlink,le88266"; + reg = <2>; + spi-max-frequency = <8000000>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts new file mode 100644 index 000000000..1a8d81ee4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1020 RDB Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi new file mode 100644 index 000000000..703142ee6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi @@ -0,0 +1,246 @@ +/* + * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + read-only; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + read-only; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + read-only; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + /* USB2 is shared with localbus. It is used + only in case of SPI and SD boot after + appropriate device-tree fixup done by uboot */ + usb@23000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts new file mode 100644 index 000000000..fd09a1978 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1020 RDB Device Tree Source (36-bit address map) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi new file mode 100644 index 000000000..cc4c74610 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -0,0 +1,190 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1020-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi new file mode 100644 index 000000000..fed9c4c8d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi @@ -0,0 +1,71 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi new file mode 100644 index 000000000..7ea85eabc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi @@ -0,0 +1,140 @@ +/* + * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 256KB for DTB Image */ + reg = <0x0 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@40000 { + /* 3.75 MB for Linux Kernel Image */ + reg = <0x00040000 0x003c0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 27MB for Root file System */ + reg = <0x00400000 0x01b00000>; + label = "NOR Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts new file mode 100644 index 000000000..bc03ef611 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0x0 0xec000000 0x02000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts new file mode 100644 index 000000000..32766f6a4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0xf 0xec000000 0x02000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts new file mode 100644 index 000000000..54af8de53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P1021 MDS Device Tree Source + * + * Copyright 2010,2012 Freescale Semiconductor Inc. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021"; + compatible = "fsl,P1021MDS"; + + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NAND Flash, BCSR, PMC0/1*/ + ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf8010000 0x00020000 + 0x3 0x0 0x0 0xf8020000 0x00020000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x0 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 5MB for Compressed Root file System Image */ + reg = <0x00600000 0x00500000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@b00000 { + /* 6MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00600000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 14MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00e00000>; + label = "NAND (RW) Writable User area"; + }; + + partition@1f00000 { + /* 1MB for microcode */ + reg = <0x01f00000 0x00100000>; + label = "NAND (RO) QE Ucode"; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + }; + + pib@2,0 { + compatible = "fsl,p1021mds-pib"; + reg = <2 0 0x10000>; + }; + + pib@3,0 { + compatible = "fsl,p1021mds-pib"; + reg = <3 0 0x10000>; + }; + }; + + soc: soc@ffe00000 { + compatible = "fsl,p1021-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + spi@7000 { + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <1 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy4: ethernet-phy@4 { + reg = <0x4>; + }; + tbi-phy@5 { + device_type = "tbi-phy"; + reg = <0x5>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy4>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x0>; + }; + qe_phy1: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi new file mode 100644 index 000000000..18f9b3160 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi @@ -0,0 +1,256 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 10.75MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00ac0000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x00ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts new file mode 100644 index 000000000..d2b471035 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts new file mode 100644 index 000000000..e298c29e5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi new file mode 100644 index 000000000..378195db9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -0,0 +1,252 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + }; + + ucc@2400 { + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + }; + + ucc@2600 { + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi new file mode 100644 index 000000000..36161b500 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi @@ -0,0 +1,71 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1021"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi new file mode 100644 index 000000000..ddefbf64f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi @@ -0,0 +1,239 @@ +/* + * P1022 DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 0 0 0>; + }; +}; + +&board_soc { + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc01ebd3d>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <266499999>; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts new file mode 100644 index 000000000..5a7eaceb9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + reg = <0x0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts new file mode 100644 index 000000000..88063cd9e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 36-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xff800000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + reg = <0xf 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + reg = <0xf 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + reg = <0xf 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts new file mode 100644 index 000000000..4261c2f7e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -0,0 +1,188 @@ +/* + * P1022 RDK 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022RDK"; + compatible = "fsl,P1022RDK"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + /* The P1022 RDK does not have any localbus devices */ + status = "disabled"; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3100 { + wm8960:codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + zl6100@21 { + compatible = "isil,zl6100"; + reg = <0x21>; + }; + zl6100@24 { + compatible = "isil,zl6100"; + reg = <0x24>; + }; + zl6100@26 { + compatible = "isil,zl6100"; + reg = <0x26>; + }; + zl6100@29 { + compatible = "isil,zl6100"; + reg = <0x29>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + partition@0 { + label = "full-spi-flash"; + reg = <0x00000000 0x00100000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8960>; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi new file mode 100644 index 000000000..6ac21e813 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -0,0 +1,252 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + /* + * The localbus on the P1022 is not a simple-bus because of the eLBC + * pin muxing when the DIU is enabled. + */ + compatible = "fsl,p1022-elbc", "fsl,elbc"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" + dma@c300 { + dma00: dma-channel@0 { + compatible = "fsl,ssi-dma-channel"; + }; + dma01: dma-channel@80 { + compatible = "fsl,ssi-dma-channel"; + }; + }; + +/include/ "pq3-gpio-0.dtsi" + + display: display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2 0 0>; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2 0 0>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <15>; + }; + +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1022-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec2_clk>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" + power@e0070 { + compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc", + "fsl,mpc8548-pmc"; + }; + +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi new file mode 100644 index 000000000..de76ae899 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi @@ -0,0 +1,73 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1022"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + vga = &display; + display = &display; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts new file mode 100644 index 000000000..ead928364 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts @@ -0,0 +1,260 @@ +/* + * P1023 RDB Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Author: Chunhe Lan + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1023si-pre.dtsi" + +/ { + model = "fsl,P1023"; + compatible = "fsl,P1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + qportals: qman-portals@ff000000 { + ranges = <0x0 0xf 0xff000000 0x200000>; + }; + + bportals: bman-portals@ff200000 { + ranges = <0x0 0xf 0xff200000 0x200000>; + }; + + soc: soc@ff600000 { + ranges = <0x0 0x0 0xff600000 0x200000>; + + i2c@3000 { + eeprom@53 { + compatible = "atmel,24c04"; + reg = <0x53>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + lbc: localbus@ff605000 { + reg = <0 0xff605000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 48MB for Root File System */ + reg = <0x00000000 0x03000000>; + label = "NOR Root File System"; + }; + + partition@3000000 { + /* 1MB for DTB Image */ + reg = <0x03000000 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@3100000 { + /* 14MB for Linux Kernel Image */ + reg = <0x03100000 0x00e00000>; + label = "NOR Linux Kernel Image"; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 14MB for Linux Kernel Image */ + reg = <0x00200000 0x00e00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1000000 { + /* 96MB for Root File System Image */ + reg = <0x01000000 0x06000000>; + label = "NAND Root File System"; + }; + + partition@7000000 { + /* 16MB for User Writable Area */ + reg = <0x07000000 0x01000000>; + label = "NAND Writable User area"; + }; + }; + }; + + pci0: pcie@ff60a000 { + reg = <0 0xff60a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + board_pci1: pci1: pcie@ff609000 { + reg = <0 0xff609000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ff60b000 { + reg = <0 0xff60b000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi new file mode 100644 index 000000000..da6d3fc6b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -0,0 +1,307 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <29 2 0 0>; + cell-index = <0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <31 2 0 0>; + cell-index = <1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <33 2 0 0>; + cell-index = <2>; + }; +}; + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <30 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <32 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <34 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1023-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1023-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1023-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1023-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + ranges = <0 0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <57 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <57 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + qman: qman@88000 { + compatible = "fsl,qman"; + reg = <0x88000 0x1000>; + interrupts = <16 2 0 0>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; + }; + + bman: bman@8a000 { + compatible = "fsl,bman"; + reg = <0x8a000 0x1000>; + interrupts = <16 2 0 0>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1023-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi new file mode 100644 index 000000000..132a15219 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi @@ -0,0 +1,79 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1023"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1023@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1023@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi new file mode 100644 index 000000000..b4d05867f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi @@ -0,0 +1,228 @@ +/* + * P1024 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Writable Area */ + reg = <0x01900000 0x00700000>; + label = "NAND Writable User area"; + }; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts new file mode 100644 index 000000000..8b09b9d56 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 32Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts new file mode 100644 index 000000000..e7093aef2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 36Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi new file mode 100644 index 000000000..0a5434a63 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi @@ -0,0 +1,326 @@ +/* + * P1025 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1025-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@3 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@4 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts new file mode 100644 index 000000000..ea33b57f8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts @@ -0,0 +1,133 @@ +/* + * P1025 RDB Device Tree Source (32-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x6>; + }; + qe_phy1: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts new file mode 100644 index 000000000..b0ded5e8b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts @@ -0,0 +1,93 @@ +/* + * P1025 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + status = "disabled"; /* no firmware loaded */ + }; + +}; + +/include/ "p1025rdb.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts new file mode 100644 index 000000000..9b8863b74 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi new file mode 100644 index 000000000..ab75b8f29 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi @@ -0,0 +1,292 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc0000021>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <133333332>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@3 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@4 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts new file mode 100644 index 000000000..ae380ebe5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P2020 DS Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020DS"; + compatible = "fsl,P2020DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + reg = <0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe08000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci1: pci1: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci0: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "p2020si-post.dtsi" +/include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi new file mode 100644 index 000000000..e699cf95b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi @@ -0,0 +1,327 @@ +/* + * P2020DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + + nand@4,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + + sgmii_phy1: sgmii-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; +}; + +&board_pci1 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + + // IDSEL 0x11 func 0 - PCI slot 1 + 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 1 - PCI slot 1 + 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 2 - PCI slot 1 + 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 3 - PCI slot 1 + 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 4 - PCI slot 1 + 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 5 - PCI slot 1 + 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 6 - PCI slot 1 + 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 7 - PCI slot 1 + 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <4 1 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi new file mode 100644 index 000000000..03c9afc82 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi @@ -0,0 +1,241 @@ +/* + * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <299999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts new file mode 100644 index 000000000..d3295c204 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts new file mode 100644 index 000000000..9307a8f41 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci2: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts new file mode 100644 index 000000000..3acd3890b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * P2020 RDB Device Tree Source + * + * Copyright 2009-2012 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi new file mode 100644 index 000000000..d410082d2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -0,0 +1,218 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + law_trgt_if = <2>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + law_trgt_if = <1>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x8000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + law_trgt_if = <0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,pmc-handle = <&etsec1_clk>; + + }; +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>; + }; + + +/include/ "pq3-etsec1-1.dtsi" + enet1: ethernet@25000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + +/include/ "pq3-etsec1-2.dtsi" + enet2: ethernet@26000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + }; + +/include/ "pq3-sec3.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + +/include/ "pq3-power.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi new file mode 100644 index 000000000..42bf3c6d2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi @@ -0,0 +1,72 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P2020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts new file mode 100644 index 000000000..950816b9d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts @@ -0,0 +1,340 @@ +/* + * P2041RDB Device Tree Source + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2041si-pre.dtsi" + +/ { + model = "fsl,P2041RDB"; + compatible = "fsl,P2041RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + phy_sgmii_3 = &phy_sgmii_3; + phy_sgmii_4 = &phy_sgmii_4; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_2 = &phy_xgmii_2; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118000 { + lm75b@48 { + compatible = "nxp,lm75a"; + reg = <0x48>; + }; + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + usb1: usb@211000 { + dr_mode = "host"; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@e1120 { + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy_sgmii_2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy_sgmii_3: ethernet-phy@3 { + reg = <0x3>; + }; + + phy_sgmii_4: ethernet-phy@4 { + reg = <0x4>; + }; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_3>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_4>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_2>; + phy-connection-type = "xgmii"; + }; + + mdio@f1000 { + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 1 0 0xf 0xffa00000 0x00040000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi new file mode 100644 index 000000000..ddc018d42 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -0,0 +1,458 @@ +/* + * P2041/P2040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +/include/ "qoriq-qman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p2041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,p2041-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" + i2c@118000 { + fsl,i2c-erratum-a004447; + }; + + i2c@118100 { + fsl,i2c-erratum-a004447; + }; + +/include/ "qoriq-i2c-1.dtsi" + i2c@119000 { + fsl,i2c-erratum-a004447; + }; + + i2c@119100 { + fsl,i2c-erratum-a004447; + }; + +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi new file mode 100644 index 000000000..6318962e8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -0,0 +1,130 @@ +/* + * P2041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P2041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&clockgen 1 3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts new file mode 100644 index 000000000..ca0e0272a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts @@ -0,0 +1,394 @@ +/* + * P3041DS Device Tree Source + * + * Copyright 2010 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p3041si-pre.dtsi" + +/ { + model = "fsl,P3041DS"; + compatible = "fsl,P3041DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <35000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "atmel,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi new file mode 100644 index 000000000..81bc75aca --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -0,0 +1,469 @@ +/* + * P3041 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +/include/ "qoriq-qman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,p3041-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi new file mode 100644 index 000000000..db92f1151 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -0,0 +1,131 @@ +/* + * P3041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P3041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&clockgen 1 3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts new file mode 100644 index 000000000..969b32c4f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts @@ -0,0 +1,439 @@ +/* + * P4080DS Device Tree Source + * + * Copyright 2009 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p4080si-pre.dtsi" + +/ { + model = "fsl,P4080DS"; + compatible = "fsl,P4080DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_rgmii = &phyrgmii; + phy5_slot3 = &phy5slot3; + phy6_slot3 = &phy6slot3; + phy7_slot3 = &phy7slot3; + phy8_slot3 = &phy8slot3; + emi1_slot3 = &p4080mdio2; + emi1_slot4 = &p4080mdio1; + emi1_slot5 = &p4080mdio3; + emi1_rgmii = &p4080mdio0; + emi2_slot4 = &p4080xmdio1; + emi2_slot5 = &p4080xmdio3; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "atmel,spd"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "atmel,spd"; + reg = <0x52>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118000 { + zl2006@21 { + compatible = "zl2006"; + reg = <0x21>; + }; + zl2006@22 { + compatible = "zl2006"; + reg = <0x22>; + }; + zl2006@23 { + compatible = "zl2006"; + reg = <0x23>; + }; + zl2006@24 { + compatible = "zl2006"; + reg = <0x24>; + }; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + }; + + i2c@119100 { + /* 0x6E: ICS9FG108 */ + }; + + usb0: usb@210000 { + phy_type = "ulpi"; + }; + + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy10>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy11>; + phy-connection-type = "xgmii"; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + board-control@3,0 { + compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + gpios = <&gpio0 1 0>, <&gpio0 0 0>; + + p4080mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + p4080mdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy5: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy6: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy7: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy8: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio2: mdio@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + status = "disabled"; + + phy5slot3: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy6slot3: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy7slot3: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy8slot3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy0: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy1: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy2: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + gpios = <&gpio0 3 0>, <&gpio0 2 0>; + + p4080xmdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy11: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + p4080xmdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy10: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + }; + }; +}; + +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi new file mode 100644 index 000000000..4da49b6dd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -0,0 +1,492 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +/include/ "qoriq-bman1-portals.dtsi" + +/include/ "qoriq-qman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x00f80000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-rmu-0.dtsi" + rmu@d3000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */ + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,p4080-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + voltage-ranges = <3300 3300>; + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + }; +/include/ "qoriq-sec4.0-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet5: ethernet@e0000 { + }; + + enet6: ethernet@e2000 { + }; + + enet7: ethernet@e4000 { + }; + + enet8: ethernet@e6000 { + }; + + enet9: ethernet@f0000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi new file mode 100644 index 000000000..0a7c65a00 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -0,0 +1,175 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&clockgen 1 3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + clocks = <&clockgen 1 4>; + next-level-cache = <&L2_4>; + fsl,portid-mapping = <0x08000000>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + clocks = <&clockgen 1 5>; + next-level-cache = <&L2_5>; + fsl,portid-mapping = <0x04000000>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + clocks = <&clockgen 1 6>; + next-level-cache = <&L2_6>; + fsl,portid-mapping = <0x02000000>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + clocks = <&clockgen 1 7>; + next-level-cache = <&L2_7>; + fsl,portid-mapping = <0x01000000>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts new file mode 100644 index 000000000..b24adf902 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts @@ -0,0 +1,394 @@ +/* + * P5020DS Device Tree Source + * + * Copyright 2010 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p5020si-pre.dtsi" + +/ { + model = "fsl,P5020DS"; + compatible = "fsl,P5020DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "atmel,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi new file mode 100644 index 000000000..cd008cdd2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -0,0 +1,478 @@ +/* + * P5020/5010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&lbc { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +/include/ "qoriq-qman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x3c000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,p5020-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec4.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-raid1.0-0.dtsi" + raideng@320000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi new file mode 100644 index 000000000..2d74ea85e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -0,0 +1,117 @@ +/* + * P5020/P5010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + compatible = "fsl,P5020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts new file mode 100644 index 000000000..5cfc689ee --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts @@ -0,0 +1,486 @@ +/* + * P5040DS Device Tree Source + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +/include/ "p5040si-pre.dtsi" + +/ { + model = "fsl,P5040DS"; + compatible = "fsl,P5040DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c; + phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d; + phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e; + phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f; + phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c; + phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d; + phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e; + phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f; + phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c; + phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d; + phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e; + phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f; + phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c; + phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d; + phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e; + phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f; + hydra_rg = &hydra_rg; + hydra_sg_slot2 = &hydra_sg_slot2; + hydra_sg_slot3 = &hydra_sg_slot3; + hydra_sg_slot5 = &hydra_sg_slot5; + hydra_sg_slot6 = &hydra_sg_slot6; + hydra_xg_slot1 = &hydra_xg_slot1; + hydra_xg_slot2 = &hydra_xg_slot2; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "atmel,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + fman@400000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_2>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_1>; + phy-connection-type = "xgmii"; + }; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x40>; + ranges = <0 3 0 0x40>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_rg:rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_sg_slot2: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_slot2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + hydra_sg_slot3: sgmii-mdio@68 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x68>; + status = "disabled"; + + phy_sgmii_slot3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + hydra_sg_slot5: sgmii-mdio@38 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + status = "disabled"; + + phy_sgmii_slot5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot6: sgmii-mdio@48 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48>; + status = "disabled"; + + phy_sgmii_slot6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + reg = <9 1>; + mux-mask = <0x06>; + + hydra_xg_slot1: hydra-xg-slot1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + phy_xgmii_slot_1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + hydra_xg_slot2: hydra-xg-slot2@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + phy_xgmii_slot_2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi new file mode 100644 index 000000000..16b454b50 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -0,0 +1,462 @@ +/* + * P5040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&lbc { + compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +/include/ "qoriq-qman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f800000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5040-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,p5040-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu2>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec5.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu4>; + }; + +/include/ "qoriq-raid1.0-0.dtsi" +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-1g-4.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet6: ethernet@e0000 { + }; + + enet7: ethernet@e2000 { + }; + + enet8: ethernet@e4000 { + }; + + enet9: ethernet@e6000 { + }; + + enet10: ethernet@e8000 { + }; + + enet11: ethernet@f0000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi new file mode 100644 index 000000000..ed89dbbda --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -0,0 +1,143 @@ +/* + * P5040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + compatible = "fsl,P5040"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&clockgen 1 3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts new file mode 100644 index 000000000..f39838d93 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PPA8548 Device Tree Source (36-bit address map) + * Copyright 2013 Prodrive B.V. + * + * Based on: + * MPC8548 CDS Device Tree Source (36-bit address map) + * Copyright 2012 Freescale Semiconductor Inc. + */ + +/include/ "mpc8548si-pre.dtsi" + +/ { + model = "ppa8548"; + compatible = "ppa8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x40000000>; + }; + + lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; + }; + + soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + pci0: pci@fe0008000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci1: pci@fe0009000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci2: pcie@fe000a000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x11000>; + port1 { + ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; + }; + }; +}; + +&lbc { + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x7A0000>; + label = "user"; + }; + + partition@7A0000 { + reg = <0x7A0000 0x20000>; + label = "env"; + read-only; + }; + + partition@7C0000 { + reg = <0x7C0000 0x40000>; + label = "u-boot"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@6f { + compatible = "intersil,isl1208"; + reg = <0x6f>; + }; + }; + + i2c@3100 { + }; + + /* + * Only ethernet controller @25000 and @26000 are used. + * Use alias enet2 and enet3 for the remainig controllers, + * to stay compatible with mpc8548si-pre.dtsi. + */ + enet2: ethernet@24000 { + status = "disabled"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <7 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <8 1 0 0>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy1>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + crypto@30000 { + status = "disabled"; + }; +}; + +/include/ "mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi new file mode 100644 index 000000000..b5b37ad30 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0x21000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi new file mode 100644 index 000000000..28cb8a55d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0xc300 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi new file mode 100644 index 000000000..5e268fdb9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * PQ3 DUART device tree stub [ controller @ offset 0x4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; + +serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi new file mode 100644 index 000000000..5743433e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2 0 0>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi new file mode 100644 index 000000000..75854b2e0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi new file mode 100644 index 000000000..3b0650a98 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; +}; + +mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi new file mode 100644 index 000000000..96693b41f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; +}; + +mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi new file mode 100644 index 000000000..6b3fab19d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; +}; + +mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi new file mode 100644 index 000000000..0da592d93 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; +}; + +mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi new file mode 100644 index 000000000..efe2ca04b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi @@ -0,0 +1,39 @@ +/* + * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ptp_clock@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi new file mode 100644 index 000000000..7fcb1ac0f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi @@ -0,0 +1,61 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; +}; + +ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b0000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi new file mode 100644 index 000000000..9f25427c1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi @@ -0,0 +1,61 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; +}; + +ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b1000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi new file mode 100644 index 000000000..cd7c318ab --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mdio@26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; +}; + +ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b2000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi new file mode 100644 index 000000000..034ab8fac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet0_grp2 { + queue-group@b4000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi new file mode 100644 index 000000000..3be9ba3b3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet1_grp2 { + queue-group@b5000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi new file mode 100644 index 000000000..02a334570 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet2_grp2 { + queue-group@b6000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi new file mode 100644 index 000000000..a1b48546b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio-controller@fc00 { + #gpio-cells = <2>; + compatible = "fsl,pq3-gpio"; + reg = <0xfc00 0x100>; + interrupts = <47 0x2 0 0>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi new file mode 100644 index 000000000..d1dd6fb82 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi new file mode 100644 index 000000000..a9bd803e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi new file mode 100644 index 000000000..8734cffae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi new file mode 100644 index 000000000..71c30eb10 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -0,0 +1,79 @@ +/* + * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; + big-endian; + single-cpu-affinity; + last-interrupt-source = <255>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +message@41400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 0 0 + 0xb1 2 0 0 + 0xb2 2 0 0 + 0xb3 2 0 0>; +}; + +msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-power.dtsi b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi new file mode 100644 index 000000000..6af124010 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright 2024 NXP + */ + +power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + + etsec1_clk: soc-clk@24 { + fsl,pmcdr-mask = <0x00000080>; + }; + etsec2_clk: soc-clk@25 { + fsl,pmcdr-mask = <0x00000040>; + }; + etsec3_clk: soc-clk@26 { + fsl,pmcdr-mask = <0x00000020>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi new file mode 100644 index 000000000..587ca9ffa --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi new file mode 100644 index 000000000..3c28dd08d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@18000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi new file mode 100644 index 000000000..eefaf2855 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@19000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi new file mode 100644 index 000000000..02a5c7ae7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi new file mode 100644 index 000000000..bba1ba44c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi new file mode 100644 index 000000000..8f0a5669b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi new file mode 100644 index 000000000..c227f2748 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi new file mode 100644 index 000000000..bb3d8266b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -0,0 +1,67 @@ +/* + * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x10000>; + reg = <0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <45 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi new file mode 100644 index 000000000..185ab9dc3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi new file mode 100644 index 000000000..fe24cd612 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi new file mode 100644 index 000000000..fcc7e5b7f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb0: usb@210000 { + compatible = "fsl-usb2-dr"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi new file mode 100644 index 000000000..5022432eb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi @@ -0,0 +1,90 @@ +/* + * QorIQ BMan Portal device tree stub for 10 portals + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x103000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x104000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x105000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x106000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x107000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x108000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x109000 0x1000>; + interrupts = <123 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi new file mode 100644 index 000000000..3b5e3504a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ] + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +bman: bman@31a000 { + compatible = "fsl,bman"; + reg = <0x31a000 0x1000>; + interrupts = <16 2 1 2>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi new file mode 100644 index 000000000..463c1ed9f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +clockgen: global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + #clock-cells = <2>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi new file mode 100644 index 000000000..0361050bb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +clockgen: global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-2.0"; + reg = <0xe1000 0x1000>; + #clock-cells = <2>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi new file mode 100644 index 000000000..1aebf3ea4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi new file mode 100644 index 000000000..ecf5e180f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi new file mode 100644 index 000000000..225c07b4e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; + +serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi new file mode 100644 index 000000000..d23233a56 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; + +serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi new file mode 100644 index 000000000..20835ae21 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc: sdhc@114000 { + compatible = "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi new file mode 100644 index 000000000..6db06975e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi new file mode 100644 index 000000000..eb77675c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + }; + + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi new file mode 100644 index 000000000..b965bc219 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + tbi-handle = <&tbi0>; + ptp-timer = <&ptp_timer0>; + }; + + mdio0: mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + interrupts = <100 2 0 0>; + + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi new file mode 100644 index 000000000..9eb6e6dd7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + tbi-handle = <&tbi1>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi new file mode 100644 index 000000000..092b89936 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + tbi-handle = <&tbi2>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi2: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi new file mode 100644 index 000000000..2df0dc876 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + tbi-handle = <&tbi3>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi3: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi new file mode 100644 index 000000000..5fceb2438 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + tbi-handle = <&tbi4>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi4: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi new file mode 100644 index 000000000..9b6cf9149 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi @@ -0,0 +1,104 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0xfe000>; + reg = <0x400000 0xfe000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x40 0xc>; + ptimer-handle = <&ptp_timer0>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman0_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; +}; + +ptp_timer0: ptp-timer@4fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x4fe000 0x1000>; + interrupts = <96 2 0 0>; + clocks = <&clockgen 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi new file mode 100644 index 000000000..83ae87b69 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi @@ -0,0 +1,61 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi new file mode 100644 index 000000000..b0f0e36a4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + + tbi5: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi new file mode 100644 index 000000000..a3a79f855 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + tbi-handle = <&tbi6>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi6: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi new file mode 100644 index 000000000..96a69a84b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + tbi-handle = <&tbi7>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi7: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi new file mode 100644 index 000000000..7405d1940 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + tbi-handle = <&tbi8>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi8: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi new file mode 100644 index 000000000..f49ad69e5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + tbi-handle = <&tbi9>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi9: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi new file mode 100644 index 000000000..e95c11ff0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi @@ -0,0 +1,104 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0xfe000>; + reg = <0x500000 0xfe000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x60 0xc>; + ptimer-handle = <&ptp_timer1>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman1_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; +}; + +ptp_timer1: ptp-timer@5fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x5fe000 0x1000>; + interrupts = <97 2 0 0>; + clocks = <&clockgen 3 1>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi new file mode 100644 index 000000000..7e70977f2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -0,0 +1,73 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 000000000..5f89f7c17 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,77 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + pcsphy-handle = <&pcsphy6>, <&qsgmiib_pcs2>, <&pcsphy6>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiib_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 000000000..fb7032ddb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,77 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs3>, <&pcsphy7>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiib_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy7: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi new file mode 100644 index 000000000..6b3609574 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "xfi"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi new file mode 100644 index 000000000..28ed1a85a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>, <&pcsphy1>; + pcs-handle-names = "sgmii", "xfi"; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 000000000..1089d6861 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 000000000..a95bbb4fc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 000000000..7d5af0147 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy2>, <&qsgmiia_pcs2>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy2: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 000000000..61e5466ec --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy3>, <&qsgmiia_pcs3>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy3: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 000000000..3ba0cdafc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>, <&pcsphy4>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy4: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 000000000..51748de0a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + qsgmiib_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy5: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi new file mode 100644 index 000000000..d62b36c5a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0xfe000>; + reg = <0x400000 0xfe000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + ptimer-handle = <&ptp_timer0>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; +}; + +ptp_timer0: ptp-timer@4fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x4fe000 0x1000>; + interrupts = <96 2 0 0>; + clocks = <&clockgen 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi new file mode 100644 index 000000000..ee4f5170f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -0,0 +1,77 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + pcsphy-handle = <&pcsphy14>, <&qsgmiid_pcs2>, <&pcsphy14>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiid_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy14: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi new file mode 100644 index 000000000..83d2e0ce8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -0,0 +1,77 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>; + pcsphy-handle = <&pcsphy15>, <&qsgmiid_pcs3>, <&pcsphy15>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiid_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy15: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi new file mode 100644 index 000000000..3132fc73f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy8>, <&pcsphy8>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy8: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi new file mode 100644 index 000000000..75e904d96 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy9>, <&qsgmiic_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy9: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi new file mode 100644 index 000000000..69f2cc7b8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy10>, <&qsgmiic_pcs2>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy10: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi new file mode 100644 index 000000000..b3aaf01d7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy11>, <&qsgmiic_pcs3>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy11: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi new file mode 100644 index 000000000..18e020432 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy12>, <&pcsphy12>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy12: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi new file mode 100644 index 000000000..55f329d13 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman1_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>; + ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy13>, <&qsgmiid_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + qsgmiid_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy13: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi new file mode 100644 index 000000000..310232460 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0xfe000>; + reg = <0x500000 0xfe000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x820 0x10>; + ptimer-handle = <&ptp_timer1>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio1: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; +}; + +ptp_timer1: ptp-timer@5fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x5fe000 0x1000>; + interrupts = <97 2 0 0>; + clocks = <&clockgen 3 1>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi new file mode 100644 index 000000000..48e5cd615 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi @@ -0,0 +1,99 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0xfe000>; + reg = <0x400000 0xfe000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + ptimer-handle = <&ptp_timer0>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x30000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + fsl,erratum-a009885; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + fsl,erratum-a009885; + }; +}; + +ptp_timer0: ptp-timer@4fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x4fe000 0x1000>; + interrupts = <96 2 0 0>; + clocks = <&clockgen 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi new file mode 100644 index 000000000..cf714f5f6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio0: gpio@130000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi new file mode 100644 index 000000000..c2f9cdadb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio1: gpio@131000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x131000 0x1000>; + interrupts = <54 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi new file mode 100644 index 000000000..33f3ccbac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio2: gpio@132000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x132000 0x1000>; + interrupts = <86 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi new file mode 100644 index 000000000..86954e95e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio3: gpio@133000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x133000 0x1000>; + interrupts = <87 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi new file mode 100644 index 000000000..5f9bf7deb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x118000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; + +i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi new file mode 100644 index 000000000..7989bf5ee --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x119000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; + +i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi new file mode 100644 index 000000000..08f42271f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200 0x44140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200 0x45140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200 0x46140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi new file mode 100644 index 000000000..64f713c24 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi @@ -0,0 +1,149 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41600 0x200 0x44148 4>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0 + 0x100 0 0 0 + 0x101 0 0 0 + 0x102 0 0 0 + 0x103 0 0 0 + 0x104 0 0 0 + 0x105 0 0 0 + 0x106 0 0 0 + 0x107 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41800 0x200 0x45148 4>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0 + 0x108 0 0 0 + 0x109 0 0 0 + 0x10a 0 0 0 + 0x10b 0 0 0 + 0x10c 0 0 0 + 0x10d 0 0 0 + 0x10e 0 0 0 + 0x10f 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41a00 0x200 0x46148 4>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0 + 0x110 0 0 0 + 0x111 0 0 0 + 0x112 0 0 0 + 0x113 0 0 0 + 0x114 0 0 0 + 0x115 0 0 0 + 0x116 0 0 0 + 0x117 0 0 0>; +}; + +msi3: msi@41c00 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41c00 0x200 0x47148 4>; + interrupts = < + 0xf8 0 0 0 + 0xf9 0 0 0 + 0xfa 0 0 0 + 0xfb 0 0 0 + 0xfc 0 0 0 + 0xfd 0 0 0 + 0xfe 0 0 0 + 0xff 0 0 0 + 0x118 0 0 0 + 0x119 0 0 0 + 0x11a 0 0 0 + 0x11b 0 0 0 + 0x11c 0 0 0 + 0x11d 0 0 0 + 0x11e 0 0 0 + 0x11f 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi new file mode 100644 index 000000000..e77e4b4ed --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <104 2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <106 2 0 0>; + cell-index = <1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <108 2 0 0>; + cell-index = <2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x103000 0x1000>; + interrupts = <110 2 0 0>; + cell-index = <3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x104000 0x1000>; + interrupts = <112 2 0 0>; + cell-index = <4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x105000 0x1000>; + interrupts = <114 2 0 0>; + cell-index = <5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x106000 0x1000>; + interrupts = <116 2 0 0>; + cell-index = <6>; + }; + + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x107000 0x1000>; + interrupts = <118 2 0 0>; + cell-index = <7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x108000 0x1000>; + interrupts = <120 2 0 0>; + cell-index = <8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x109000 0x1000>; + interrupts = <122 2 0 0>; + cell-index = <9>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi new file mode 100644 index 000000000..0695778c4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ QMan device tree stub [ controller @ offset 0x318000 ] + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x1000>; + interrupts = <16 2 1 3>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi new file mode 100644 index 000000000..b379abd14 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x2000>; + interrupts = <16 2 1 3>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi new file mode 100644 index 000000000..8d2e8aa6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +raideng: raideng@320000 { + compatible = "fsl,raideng-v1.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x320000 0x10000>; + ranges = <0 0x320000 0x10000>; + + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + + raideng_jr0: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <139 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr1: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <140 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; + + raideng_jq1@2000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2000 0x1000>; + ranges = <0x0 0x2000 0x1000>; + + raideng_jr2: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <141 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr3: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <142 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi new file mode 100644 index 000000000..ca7fec792 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <16 2 1 11>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi new file mode 100644 index 000000000..b642047fd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@220000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi new file mode 100644 index 000000000..c57370259 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@221000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi new file mode 100644 index 000000000..02bee5fcb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <1>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi new file mode 100644 index 000000000..7f7574e53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi @@ -0,0 +1,110 @@ +/* + * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi new file mode 100644 index 000000000..e298efbb0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi @@ -0,0 +1,110 @@ +/* + * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <5>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi new file mode 100644 index 000000000..33ff09d52 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi @@ -0,0 +1,119 @@ +/* + * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <5>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.2-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi new file mode 100644 index 000000000..08778221c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi @@ -0,0 +1,119 @@ +/* + * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <4>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.3-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi new file mode 100644 index 000000000..7d4a6a235 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi @@ -0,0 +1,57 @@ +/* + * QorIQ Sec/Crypto 6.0 device tree stub + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + compatible = "fsl,sec-v6.0", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi new file mode 100644 index 000000000..4dd6f84c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@211000 { + compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi new file mode 100644 index 000000000..f053835aa --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@210000 { + compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts new file mode 100644 index 000000000..f82f85c65 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts @@ -0,0 +1,232 @@ +/* + * T1023 RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1023RDB"; + compatible = "fsl,T1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 1 0 0xf 0xff800000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clk */ + }; + }; + + i2c@118000 { + eeprom@50 { + compatible = "st,m24256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x5 0x1 0 0>; + }; + }; + + i2c@118100 { + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + current-sensor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + fman@400000 { + fm1mac1: ethernet@e0000 { + phy-handle = <&sgmii_rtk_phy2>; + phy-connection-type = "sgmii"; + sleep = <&rcpm 0x80000000>; + }; + + fm1mac2: ethernet@e2000 { + sleep = <&rcpm 0x40000000>; + }; + + fm1mac3: ethernet@e4000 { + phy-handle = <&sgmii_aqr_phy3>; + phy-connection-type = "2500base-x"; + sleep = <&rcpm 0x20000000>; + }; + + fm1mac4: ethernet@e6000 { + phy-handle = <&rgmii_rtk_phy1>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x10000000>; + }; + + + mdio0: mdio@fc000 { + rgmii_rtk_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_rtk_phy2: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + xmdio0: mdio@fd000 { + sgmii_aqr_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +#include "t1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi new file mode 100644 index 000000000..8ef0c0202 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi @@ -0,0 +1,523 @@ +/* + * T1023 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <25 2 0 0>; +}; + +&pci0 { + compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&pci1 { + compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&pci2 { + compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + cell-index = <0x0>; + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + cell-index = <0x1>; + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + cell-index = <2>; + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + cell-index = <0x3>; + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + cell-index = <0x4>; + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + cell-index = <0x5>; + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <16>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v5.0", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t1023-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x1000>; + ranges = <0 0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <128 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t1023-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t1023-serdes"; + reg = <0xea000 0x4000>; + }; + + tmu: tmu@f0000 { + compatible = "fsl,qoriq-tmu"; + reg = <0xf0000 0x1000>; + interrupts = <18 2 0 0>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; + fsl,tmu-calibration = + <0x00000000 0x0000000f>, + <0x00000001 0x00000017>, + <0x00000002 0x0000001e>, + <0x00000003 0x00000026>, + <0x00000004 0x0000002e>, + <0x00000005 0x00000035>, + <0x00000006 0x0000003d>, + <0x00000007 0x00000044>, + <0x00000008 0x0000004c>, + <0x00000009 0x00000053>, + <0x0000000a 0x0000005b>, + <0x0000000b 0x00000064>, + + <0x00010000 0x00000011>, + <0x00010001 0x0000001c>, + <0x00010002 0x00000024>, + <0x00010003 0x0000002b>, + <0x00010004 0x00000034>, + <0x00010005 0x00000039>, + <0x00010006 0x00000042>, + <0x00010007 0x0000004c>, + <0x00010008 0x00000051>, + <0x00010009 0x0000005a>, + <0x0001000a 0x00000063>, + + <0x00020000 0x00000013>, + <0x00020001 0x00000019>, + <0x00020002 0x00000024>, + <0x00020003 0x0000002c>, + <0x00020004 0x00000035>, + <0x00020005 0x0000003d>, + <0x00020006 0x00000046>, + <0x00020007 0x00000050>, + <0x00020008 0x00000059>, + + <0x00030000 0x00000002>, + <0x00030001 0x0000000d>, + <0x00030002 0x00000019>, + <0x00030003 0x00000024>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + scfg: global-utilities@fc000 { + compatible = "fsl,t1023-scfg"; + reg = <0xfc000 0x1000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t1023-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + no-1-8-v; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-qman3.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts new file mode 100644 index 000000000..9ea7942f9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts @@ -0,0 +1,280 @@ +/* + * T1024 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1024QDS"; + compatible = "fsl,T1024QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */ + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040", "jedec,spi-nor"; /* 512KB */ + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */ + reg = <2>; + spi-max-frequency = <10000000>; + }; + + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; + }; + + slic@3 { + compatible = "maxim,ds26522"; + reg = <3>; + spi-max-frequency = <2000000>; + }; + }; + + i2c@118000 { + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + /* Thermal Monitor */ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x5 0x1 0 0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +#include "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts new file mode 100644 index 000000000..7d003e07a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -0,0 +1,268 @@ +/* + * T1024 RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1024RDB"; + compatible = "fsl,T1024RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + bank-width = <1>; + device-width = <1>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clk */ + }; + + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; + }; + + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; + }; + }; + + i2c@118000 { + adt7461@4c { + /* Thermal Monitor */ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@118100 { + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + fman@400000 { + fm1mac1: ethernet@e0000 { + phy-handle = <&xg_aqr105_phy3>; + phy-connection-type = "xgmii"; + sleep = <&rcpm 0x80000000>; + }; + + fm1mac2: ethernet@e2000 { + sleep = <&rcpm 0x40000000>; + }; + + fm1mac3: ethernet@e4000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x20000000>; + }; + + fm1mac4: ethernet@e6000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x10000000>; + }; + + + mdio0: mdio@fc000 { + rgmii_phy1: ethernet-phy@2 { + reg = <0x2>; + }; + rgmii_phy2: ethernet-phy@6 { + reg = <0x6>; + }; + }; + + xmdio0: mdio@fd000 { + xg_aqr105_phy3: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + sg_2500_aqr105_phy4: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +#include "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi new file mode 100644 index 000000000..bb480346a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi @@ -0,0 +1,100 @@ +/* + * T1024 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "t1023si-post.dtsi" + +/ { + aliases { + vga = &display; + display = &display; + }; + + qe:qe@ffe140000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +&soc { + display:display@180000 { + compatible = "fsl,t1024-diu", "fsl,diu"; + reg = <0x180000 1000>; + interrupts = <74 2 0 0>; + }; +}; + +&qe { + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi new file mode 100644 index 000000000..d87ea1316 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi @@ -0,0 +1,95 @@ +/* + * T1024/T1023 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + dma0 = &dma0; + dma1 = &dma1; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + sdhc = &sdhc; + + crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + #cooling-cells = <2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts new file mode 100644 index 000000000..fb6bc02eb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts @@ -0,0 +1,46 @@ +/* + * T1040D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xd4rdb.dtsi" + +/ { + model = "fsl,T1040D4RDB"; + compatible = "fsl,T1040D4RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +#include "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts new file mode 100644 index 000000000..5f76edc78 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts @@ -0,0 +1,46 @@ +/* + * T1040QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1040QDS"; + compatible = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +#include "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts new file mode 100644 index 000000000..d4f5f159d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * T1040RDB-REV-A Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + */ + +#include "t1040rdb.dts" + +/ { + model = "fsl,T1040RDB-REV-A"; +}; + +&seville_port0 { + label = "ETH5"; +}; + +&seville_port2 { + label = "ETH7"; +}; + +&seville_port4 { + label = "ETH9"; +}; + +&seville_port6 { + label = "ETH11"; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts new file mode 100644 index 000000000..4347924e9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -0,0 +1,188 @@ +/* + * T1040RDB Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1040RDB"; + compatible = "fsl,T1040RDB"; + + aliases { + phy_sgmii_2 = &phy_sgmii_2; + }; + + soc@ffe000000 { + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_2: ethernet-phy@3 { + reg = <0x03>; + }; + + /* VSC8514 QSGMII PHY */ + phy_qsgmii_0: ethernet-phy@4 { + reg = <0x4>; + }; + + phy_qsgmii_1: ethernet-phy@5 { + reg = <0x5>; + }; + + phy_qsgmii_2: ethernet-phy@6 { + reg = <0x6>; + }; + + phy_qsgmii_3: ethernet-phy@7 { + reg = <0x7>; + }; + + /* VSC8514 QSGMII PHY */ + phy_qsgmii_4: ethernet-phy@8 { + reg = <0x8>; + }; + + phy_qsgmii_5: ethernet-phy@9 { + reg = <0x9>; + }; + + phy_qsgmii_6: ethernet-phy@a { + reg = <0xa>; + }; + + phy_qsgmii_7: ethernet-phy@b { + reg = <0xb>; + }; + }; + }; + }; + + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; + }; + }; +}; + +#include "t1040si-post.dtsi" + +&seville_switch { + status = "okay"; +}; + +&seville_port0 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_0>; + phy-mode = "qsgmii"; + label = "ETH3"; + status = "okay"; +}; + +&seville_port1 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_1>; + phy-mode = "qsgmii"; + label = "ETH4"; + status = "okay"; +}; + +&seville_port2 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_2>; + phy-mode = "qsgmii"; + label = "ETH5"; + status = "okay"; +}; + +&seville_port3 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_3>; + phy-mode = "qsgmii"; + label = "ETH6"; + status = "okay"; +}; + +&seville_port4 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_4>; + phy-mode = "qsgmii"; + label = "ETH7"; + status = "okay"; +}; + +&seville_port5 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_5>; + phy-mode = "qsgmii"; + label = "ETH8"; + status = "okay"; +}; + +&seville_port6 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_6>; + phy-mode = "qsgmii"; + label = "ETH9"; + status = "okay"; +}; + +&seville_port7 { + managed = "in-band-status"; + phy-handle = <&phy_qsgmii_7>; + phy-mode = "qsgmii"; + label = "ETH10"; + status = "okay"; +}; + +&seville_port8 { + status = "okay"; +}; + +&seville_port9 { + status = "okay"; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi new file mode 100644 index 000000000..c9542b73b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -0,0 +1,757 @@ +/* + * T1040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <25 2 0 0>; +}; + +&pci0 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&pci1 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&pci2 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&pci3 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <116 0x2 0 0>; + cell-index = <0x6>; + }; + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <118 0x2 0 0>; + cell-index = <0x7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <120 0x2 0 0>; + cell-index = <0x8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <122 0x2 0 0>; + cell-index = <0x9>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <16>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v5.0", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t1040-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x1000>; + ranges = <0 0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <128 1>; + fsl,secondary-cache-geometry = <16 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t1040-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t1040-serdes"; + reg = <0xea000 0x4000>; + }; + + tmu: tmu@f0000 { + compatible = "fsl,qoriq-tmu"; + reg = <0xf0000 0x1000>; + interrupts = <18 2 0 0>; + fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>; + fsl,tmu-calibration = + <0x00000000 0x00000025>, + <0x00000001 0x00000028>, + <0x00000002 0x0000002d>, + <0x00000003 0x00000031>, + <0x00000004 0x00000036>, + <0x00000005 0x0000003a>, + <0x00000006 0x00000040>, + <0x00000007 0x00000044>, + <0x00000008 0x0000004a>, + <0x00000009 0x0000004f>, + <0x0000000a 0x00000054>, + + <0x00010000 0x0000000d>, + <0x00010001 0x00000013>, + <0x00010002 0x00000019>, + <0x00010003 0x0000001f>, + <0x00010004 0x00000025>, + <0x00010005 0x0000002d>, + <0x00010006 0x00000033>, + <0x00010007 0x00000043>, + <0x00010008 0x0000004b>, + <0x00010009 0x00000053>, + + <0x00020000 0x00000010>, + <0x00020001 0x00000017>, + <0x00020002 0x0000001f>, + <0x00020003 0x00000029>, + <0x00020004 0x00000031>, + <0x00020005 0x0000003c>, + <0x00020006 0x00000042>, + <0x00020007 0x0000004d>, + <0x00020008 0x00000056>, + + <0x00030000 0x00000012>, + <0x00030001 0x0000001d>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 2>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + scfg: global-utilities@fc000 { + compatible = "fsl,t1040-scfg"; + reg = <0xfc000 0x1000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t1040-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + + display@180000 { + compatible = "fsl,t1040-diu", "fsl,diu"; + reg = <0x180000 1000>; + interrupts = <74 2 0 0>; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-qman3.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + + seville_switch: ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + interrupts = <26 2 0 0>; + interrupt-names = "xtr"; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + seville_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + seville_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + seville_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + seville_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + seville_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + seville_port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + seville_port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + seville_port7: port@7 { + reg = <7>; + status = "disabled"; + }; + + seville_port8: port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet0>; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + seville_port9: port@9 { + reg = <9>; + phy-mode = "internal"; + ethernet = <&enet1>; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts new file mode 100644 index 000000000..4fa15f48a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts @@ -0,0 +1,105 @@ +/* + * T1042D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xd4rdb.dtsi" + +/ { + model = "fsl,T1042D4RDB"; + compatible = "fsl,T1042D4RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1040d4rdb-cpld", + "fsl,deepsleep-cpld"; + }; + }; + + soc: soc@ffe000000 { + fman0: fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + phy_sgmii_0: ethernet-phy@2 { + reg = <0x02>; + }; + + phy_sgmii_1: ethernet-phy@3 { + reg = <0x03>; + }; + + phy_sgmii_2: ethernet-phy@1 { + reg = <0x01>; + }; + + phy_rgmii_0: ethernet-phy@4 { + reg = <0x04>; + }; + + phy_rgmii_1: ethernet-phy@5 { + reg = <0x05>; + }; + }; + }; + }; + +}; + +#include "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts new file mode 100644 index 000000000..90a4a73bb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts @@ -0,0 +1,46 @@ +/* + * T1042QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1042QDS"; + compatible = "fsl,T1042QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +#include "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts new file mode 100644 index 000000000..099764322 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -0,0 +1,76 @@ +/* + * T1042RDB Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB"; + compatible = "fsl,T1042RDB"; + + aliases { + phy_sgmii_2 = &phy_sgmii_2; + }; + + soc@ffe000000 { + fman@400000 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_2: ethernet-phy@3 { + reg = <0x03>; + }; + }; + }; + }; + + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; + }; + }; +}; + +#include "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts new file mode 100644 index 000000000..b10cab1a3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -0,0 +1,73 @@ +/* + * T1042RDB_PI Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB_PI"; + compatible = "fsl,T1042RDB_PI"; + + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; + }; + }; + + soc: soc@ffe000000 { + i2c@118000 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + + fman@400000 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + status = "disabled"; + }; + }; + }; +}; + +#include "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi new file mode 100644 index 000000000..a5544f936 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi @@ -0,0 +1,37 @@ +/* + * T1042 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "t1040si-post.dtsi" + +/* Place holder for ethernet related device tree nodes */ diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi new file mode 100644 index 000000000..863f94312 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi @@ -0,0 +1,253 @@ +/* + * T1040D4RDB/T1042D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + compatible = "fsl,t1040d4rdb-cpld"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; + reg = <0>; + /* input clock */ + spi-max-frequency = <10000000>; + }; + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; /* input clock */ + }; + }; + i2c@118000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + + i2c@118100 { + mux@77 { + /* + * Child nodes of mux depend on which i2c + * devices are connected via the mini PCI + * connector slot1, the mini PCI connector + * slot2, the HDMI connector, and the PEX + * slot. Systems with such devices attached + * should provide a wrapper .dts file that + * includes this one, and adds those nodes + */ + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000 + 0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + + ucc_serial: ucc@2200 { + compatible = "fsl,t1040-ucc-uart"; + port-number = <0>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi new file mode 100644 index 000000000..1c329f076 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi @@ -0,0 +1,407 @@ +/* + * T104xQDS Device Tree Source + * + * Copyright 2013 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + emi1_rgmii0 = &t1040mdio0; + emi1_rgmii1 = &t1040mdio1; + emi1_slot3 = &t1040mdio3; + emi1_slot5 = &t1040mdio5; + emi1_slot6 = &t1040mdio6; + emi1_slot7 = &t1040mdio7; + rgmii_phy1 = &rgmii_phy1; + rgmii_phy2 = &rgmii_phy2; + phy_s3_01 = &phy_s3_01; + phy_s3_02 = &phy_s3_02; + phy_s3_03 = &phy_s3_03; + phy_s3_04 = &phy_s3_04; + phy_s5_01 = &phy_s5_01; + phy_s5_02 = &phy_s5_02; + phy_s5_03 = &phy_s5_03; + phy_s5_04 = &phy_s5_04; + phy_s6_01 = &phy_s6_01; + phy_s6_02 = &phy_s6_02; + phy_s6_03 = &phy_s6_03; + phy_s6_04 = &phy_s6_04; + phy_s7_01 = &phy_s7_01; + phy_s7_02 = &phy_s7_02; + phy_s7_03 = &phy_s7_03; + phy_s7_04 = &phy_s7_04; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t1040mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + status = "disabled"; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t1040mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + status = "disabled"; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t1040mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy_s3_01: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_s3_02: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_s3_03: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_s3_04: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t1040mdio5: mdio@a0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0>; + + phy_s5_01: ethernet-phy@1c { + reg = <0x14>; + }; + + phy_s5_02: ethernet-phy@1d { + reg = <0x15>; + }; + + phy_s5_03: ethernet-phy@1e { + reg = <0x16>; + }; + + phy_s5_04: ethernet-phy@1f { + reg = <0x17>; + }; + }; + + t1040mdio6: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + + phy_s6_01: ethernet-phy@1c { + reg = <0x18>; + }; + + phy_s6_02: ethernet-phy@1d { + reg = <0x19>; + }; + + phy_s6_03: ethernet-phy@1e { + reg = <0x1a>; + }; + + phy_s6_04: ethernet-phy@1f { + reg = <0x1b>; + }; + }; + + t1040mdio7: mdio@e0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0>; + status = "disabled"; + + phy_s7_01: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_s7_02: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_s7_03: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_s7_04: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_s7_03>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + + ucc_serial: ucc@2200 { + compatible = "fsl,t1040-ucc-uart"; + port-number = <0>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi new file mode 100644 index 000000000..fc7bec5dc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi @@ -0,0 +1,263 @@ +/* + * T1040RDB/T1042RDB Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + slic@3 { + compatible = "maxim,ds26522"; + reg = <3>; + spi-max-frequency = <2000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + fman@400000 { + ethernet@e6000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii-id"; + }; + + mdio0: mdio@fc000 { + phy_sgmii_2: ethernet-phy@3 { + reg = <0x03>; + }; + + phy_rgmii_0: ethernet-phy@1 { + reg = <0x01>; + }; + + phy_rgmii_1: ethernet-phy@2 { + reg = <0x02>; + }; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + + ucc_serial: ucc@2200 { + compatible = "fsl,t1040-ucc-uart"; + port-number = <0>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi new file mode 100644 index 000000000..dd59e4b69 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -0,0 +1,115 @@ +/* + * T1040/T1042 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013-2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + sdhc = &sdhc; + + crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + #cooling-cells = <2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_3>; + #cooling-cells = <2>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&clockgen 1 3>; + next-level-cache = <&L2_4>; + #cooling-cells = <2>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts new file mode 100644 index 000000000..8d190e8c6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts @@ -0,0 +1,213 @@ +/* + * T2080QDS Device Tree Source + * + * Copyright 2013 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + emi1_slot1 = &t2080mdio2; + emi1_slot2 = &t2080mdio3; + emi1_slot3 = &t2080mdio4; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_s3_1e>; + phy-connection-type = "xgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_s3_1f>; + phy-connection-type = "xgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_sgmii_s2_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_s2_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xaui_slot3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_sgmii_s3_1f>; + phy-connection-type = "xgmii"; + }; + + mdio@fd000 { + phy_xaui_slot3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + }; +}; + +&boardctrl { + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t2080mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t2080mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t2080mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + status = "disabled"; + + phy_sgmii_s1_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s1_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s1_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s1_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2080mdio3: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + + phy_sgmii_s2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2080mdio4: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy_sgmii_s3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; +}; + +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts new file mode 100644 index 000000000..092a40074 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts @@ -0,0 +1,122 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xrdb.dtsi" + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&xg_aq1202_phy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@e2000 { + phy-handle = <&xg_aq1202_phy4>; + phy-connection-type = "xgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xg_cs4315_phy2>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xg_cs4315_phy1>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + mdio@fd000 { + xg_cs4315_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0xc>; + }; + + xg_cs4315_phy2: ethernet-phy@d { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0xd>; + }; + + xg_aq1202_phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xg_aq1202_phy4: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + }; + }; +}; + +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi new file mode 100644 index 000000000..082ec2044 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi @@ -0,0 +1,69 @@ +/* + * T2080 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t2081si-post.dtsi" + +&soc { +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts new file mode 100644 index 000000000..fc5c4a30f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts @@ -0,0 +1,265 @@ +/* + * T2081QDS Device Tree Source + * + * Copyright 2013 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2081QDS"; + compatible = "fsl,T2081QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + emi1_slot1 = &t2081mdio2; + emi1_slot2 = &t2081mdio3; + emi1_slot3 = &t2081mdio4; + emi1_slot5 = &t2081mdio5; + emi1_slot6 = &t2081mdio6; + emi1_slot7 = &t2081mdio7; + }; +}; + +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_s7_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_s7_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_sgmii_s3_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_s7_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_sgmii_s2_1c>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_sgmii_s7_1e>; + phy-connection-type = "xgmii"; + }; + }; +}; + +&boardctrl { + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t2081mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t2081mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t2081mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + + phy_sgmii_s1_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s1_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s1_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s1_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + phy_sgmii_s2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio4: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + status = "disabled"; + + phy_sgmii_s3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio5: mdio@a0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0>; + status = "disabled"; + + phy_sgmii_s5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio6: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + status = "disabled"; + + phy_sgmii_s6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio7: mdio@e0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0>; + + phy_sgmii_s7_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s7_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s7_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s7_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; +}; + +/include/ "t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi new file mode 100644 index 000000000..6bb95878d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -0,0 +1,677 @@ +/* + * T2081 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <116 0x2 0 0>; + cell-index = <0x6>; + }; + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <118 0x2 0 0>; + cell-index = <0x7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <120 0x2 0 0>; + cell-index = <0x8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <122 0x2 0 0>; + cell-index = <0x9>; + }; + qportal10: qman-portal@28000 { + compatible = "fsl,qman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <124 0x2 0 0>; + cell-index = <0xa>; + }; + qportal11: qman-portal@2c000 { + compatible = "fsl,qman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <126 0x2 0 0>; + cell-index = <0xb>; + }; + qportal12: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <128 0x2 0 0>; + cell-index = <0xc>; + }; + qportal13: qman-portal@34000 { + compatible = "fsl,qman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <130 0x2 0 0>; + cell-index = <0xd>; + }; + qportal14: qman-portal@38000 { + compatible = "fsl,qman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <132 0x2 0 0>; + cell-index = <0xe>; + }; + qportal15: qman-portal@3c000 { + compatible = "fsl,qman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <134 0x2 0 0>; + cell-index = <0xf>; + }; + qportal16: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <136 0x2 0 0>; + cell-index = <0x10>; + }; + qportal17: qman-portal@44000 { + compatible = "fsl,qman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <138 0x2 0 0>; + cell-index = <0x11>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t2080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x3000>; + fsl,portid-mapping = <0x8000>; + ranges = <0 0x20000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t2080-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t2080-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; +/include/ "elo3-dma-2.dtsi" + dma@102300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t2080-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sec5.2-0.dtsi" +/include/ "qoriq-qman3.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-10g-2.dtsi" +/include/ "qoriq-fman3-0-10g-3.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + + L2_1: l2-cache-controller@c20000 { + /* Cluster 0 L2 cache */ + compatible = "fsl,t2080-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + interrupts = <16 2 1 9>; + }; +}; + +&fman0_rx_0x08 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x28 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_rx_0x09 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x29 { + /delete-property/ fsl,fman-10g-port; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi new file mode 100644 index 000000000..962c99941 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi @@ -0,0 +1,277 @@ +/* + * T2080/T2081 QDS Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */ + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <35000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64", "jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <35000000>; + }; + }; + + i2c@118000 { + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0xb 0x1 0 0>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi new file mode 100644 index 000000000..ecc3e8c73 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi @@ -0,0 +1,211 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t2080-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7481@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + i2c@118100 { + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi new file mode 100644 index 000000000..3f745de44 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi @@ -0,0 +1,110 @@ +/* + * T2080/T2081 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + + crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts new file mode 100644 index 000000000..128b5798b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts @@ -0,0 +1,708 @@ +/* + * T4240QDS Device Tree Source + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t4240si-pre.dtsi" + +/ { + model = "fsl,T4240QDS"; + compatible = "fsl,T4240QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + phy_rgmii1 = &phyrgmii1; + phy_rgmii2 = &phyrgmii2; + phy_sgmii3 = &phy3; + phy_sgmii4 = &phy4; + phy_sgmii11 = &phy11; + phy_sgmii12 = &phy12; + sgmii_phy11 = &sgmiiphy11; + sgmii_phy12 = &sgmiiphy12; + sgmii_phy13 = &sgmiiphy13; + sgmii_phy14 = &sgmiiphy14; + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy31 = &sgmiiphy31; + sgmii_phy32 = &sgmiiphy32; + sgmii_phy33 = &sgmiiphy33; + sgmii_phy34 = &sgmiiphy34; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + phy_xfi1 = &xfiphy1; + phy_xfi2 = &xfiphy2; + phy_xfi3 = &xfiphy3; + phy_xfi4 = &xfiphy4; + xfi_pcs_mdio1 = &xfimdio0; + xfi_pcs_mdio2 = &xfimdio1; + xfi_pcs_mdio3 = &xfimdio2; + xfi_pcs_mdio4 = &xfimdio3; + emi1_rgmii = &t4240mdio0; + emi1_slot1 = &t4240mdio1; + emi1_slot2 = &t4240mdio2; + emi1_slot3 = &t4240mdio3; + emi1_slot4 = &t4240mdio4; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@C00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio1>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t4240mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii1: ethernet-phy@1 { + reg = <0x1>; + }; + + phyrgmii2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t4240mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + status = "disabled"; + + phy1: ethernet-phy@0 { + reg = <0x0>; + }; + + phy2: ethernet-phy@1 { + reg = <0x1>; + }; + + phy3: ethernet-phy@2 { + reg = <0x2>; + }; + + phy4: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmiiphy11: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy12: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy13: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy14: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + status = "disabled"; + + phy5: ethernet-phy@4 { + reg = <0x4>; + }; + + phy6: ethernet-phy@5 { + reg = <0x5>; + }; + + phy7: ethernet-phy@6 { + reg = <0x6>; + }; + + phy8: ethernet-phy@7 { + reg = <0x7>; + }; + + sgmiiphy21: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy22: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy23: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy24: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy9: ethernet-phy@8 { + reg = <0x8>; + }; + + phy10: ethernet-phy@9 { + reg = <0x9>; + }; + + phy11: ethernet-phy@a { + reg = <0xa>; + }; + + phy12: ethernet-phy@b { + reg = <0xb>; + }; + + sgmiiphy31: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy32: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy33: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy34: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio4: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + status = "disabled"; + + phy13: ethernet-phy@c { + reg = <0xc>; + }; + + phy14: ethernet-phy@d { + reg = <0xd>; + }; + + phy15: ethernet-phy@e { + reg = <0xe>; + }; + + phy16: ethernet-phy@f { + reg = <0xf>; + }; + + sgmiiphy41: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy42: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy43: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy44: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@51 { + compatible = "atmel,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; + eeprom@53 { + compatible = "atmel,24c256"; + reg = <0x53>; + }; + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + }; + eeprom@55 { + compatible = "atmel,24c256"; + reg = <0x55>; + }; + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + ina220@46 { + compatible = "ti,ina220"; + reg = <0x46>; + shunt-resistor = <1000>; + }; + + ina220@47 { + compatible = "ti,ina220"; + reg = <0x47>; + shunt-resistor = <1000>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + + fman@400000 { + port@83000 { + status = "disabled"; + }; + + port@84000 { + status = "disabled"; + }; + + port@85000 { + status = "disabled"; + }; + + port@86000 { + status = "disabled"; + }; + + port@87000 { + status = "disabled"; + }; + + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii2>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xauiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xauiphy2>; + phy-connection-type = "xgmii"; + }; + + xfimdio0: mdio@f1000 { + status = "disabled"; + + xfiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + xfimdio1: mdio@f3000 { + status = "disabled"; + + xfiphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; + + fman@500000 { + port@84000 { + status = "disabled"; + }; + + port@85000 { + status = "disabled"; + }; + + port@86000 { + status = "disabled"; + }; + + port@87000 { + status = "disabled"; + }; + + ethernet@e0000 { + phy-handle = <&phy13>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy14>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy15>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy16>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii1>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy10>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xauiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xauiphy4>; + phy-connection-type = "xgmii"; + }; + + xfimdio2: mdio@f1000 { + status = "disabled"; + + xfiphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + xfimdio3: mdio@f3000 { + status = "disabled"; + + xfiphy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + mdio@fd000 { + xauiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xauiphy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + xauiphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + xauiphy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts new file mode 100644 index 000000000..145896f2e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts @@ -0,0 +1,363 @@ +/* + * T4240RDB Device Tree Source + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t4240si-pre.dtsi" + +/ { + model = "fsl,T4240RDB"; + compatible = "fsl,T4240RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + hwmon@2f { + compatible = "winbond,w83793"; + reg = <0x2f>; + }; + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + }; + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy21>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy22>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy23>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy24>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy2>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy41>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy42>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy43>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy44>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy4>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + sgmiiphy21: ethernet-phy@0 { + reg = <0x0>; + }; + + sgmiiphy22: ethernet-phy@1 { + reg = <0x1>; + }; + + sgmiiphy23: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmiiphy24: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmiiphy41: ethernet-phy@4 { + reg = <0x4>; + }; + + sgmiiphy42: ethernet-phy@5 { + reg = <0x5>; + }; + + sgmiiphy43: ethernet-phy@6 { + reg = <0x6>; + }; + + sgmiiphy44: ethernet-phy@7 { + reg = <0x7>; + }; + }; + + mdio@fd000 { + xfiphy1: ethernet-phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + + xfiphy2: ethernet-phy@11 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x11>; + }; + + xfiphy3: ethernet-phy@13 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x13>; + }; + + xfiphy4: ethernet-phy@12 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x12>; + }; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi new file mode 100644 index 000000000..65f3e17c0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -0,0 +1,1111 @@ +/* + * T4240 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-ddr@14000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr3>; + reg = <0x14000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; + dcsr-cpu-sb-proxy@120000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x120000 0x1000 0x121000 0x1000>; + }; + dcsr-cpu-sb-proxy@128000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x128000 0x1000 0x129000 0x1000>; + }; + dcsr-cpu-sb-proxy@130000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x130000 0x1000 0x131000 0x1000>; + }; + dcsr-cpu-sb-proxy@138000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x138000 0x1000 0x139000 0x1000>; + }; + dcsr-cpu-sb-proxy@140000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu8>; + reg = <0x140000 0x1000 0x141000 0x1000>; + }; + dcsr-cpu-sb-proxy@148000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu9>; + reg = <0x148000 0x1000 0x149000 0x1000>; + }; + dcsr-cpu-sb-proxy@150000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu10>; + reg = <0x150000 0x1000 0x151000 0x1000>; + }; + dcsr-cpu-sb-proxy@158000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu11>; + reg = <0x158000 0x1000 0x159000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; + bman-portal@48000 { + compatible = "fsl,bman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <141 2 0 0>; + }; + bman-portal@4c000 { + compatible = "fsl,bman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <143 2 0 0>; + }; + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <145 2 0 0>; + }; + bman-portal@54000 { + compatible = "fsl,bman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <147 2 0 0>; + }; + bman-portal@58000 { + compatible = "fsl,bman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <149 2 0 0>; + }; + bman-portal@5c000 { + compatible = "fsl,bman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <151 2 0 0>; + }; + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <153 2 0 0>; + }; + bman-portal@64000 { + compatible = "fsl,bman-portal"; + reg = <0x64000 0x4000>, <0x1019000 0x1000>; + interrupts = <155 2 0 0>; + }; + bman-portal@68000 { + compatible = "fsl,bman-portal"; + reg = <0x68000 0x4000>, <0x101a000 0x1000>; + interrupts = <157 2 0 0>; + }; + bman-portal@6c000 { + compatible = "fsl,bman-portal"; + reg = <0x6c000 0x4000>, <0x101b000 0x1000>; + interrupts = <159 2 0 0>; + }; + bman-portal@70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000>, <0x101c000 0x1000>; + interrupts = <161 2 0 0>; + }; + bman-portal@74000 { + compatible = "fsl,bman-portal"; + reg = <0x74000 0x4000>, <0x101d000 0x1000>; + interrupts = <163 2 0 0>; + }; + bman-portal@78000 { + compatible = "fsl,bman-portal"; + reg = <0x78000 0x4000>, <0x101e000 0x1000>; + interrupts = <165 2 0 0>; + }; + bman-portal@7c000 { + compatible = "fsl,bman-portal"; + reg = <0x7c000 0x4000>, <0x101f000 0x1000>; + interrupts = <167 2 0 0>; + }; + bman-portal@80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000>, <0x1020000 0x1000>; + interrupts = <169 2 0 0>; + }; + bman-portal@84000 { + compatible = "fsl,bman-portal"; + reg = <0x84000 0x4000>, <0x1021000 0x1000>; + interrupts = <171 2 0 0>; + }; + bman-portal@88000 { + compatible = "fsl,bman-portal"; + reg = <0x88000 0x4000>, <0x1022000 0x1000>; + interrupts = <173 2 0 0>; + }; + bman-portal@8c000 { + compatible = "fsl,bman-portal"; + reg = <0x8c000 0x4000>, <0x1023000 0x1000>; + interrupts = <175 2 0 0>; + }; + bman-portal@90000 { + compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x1024000 0x1000>; + interrupts = <385 2 0 0>; + }; + bman-portal@94000 { + compatible = "fsl,bman-portal"; + reg = <0x94000 0x4000>, <0x1025000 0x1000>; + interrupts = <387 2 0 0>; + }; + bman-portal@98000 { + compatible = "fsl,bman-portal"; + reg = <0x98000 0x4000>, <0x1026000 0x1000>; + interrupts = <389 2 0 0>; + }; + bman-portal@9c000 { + compatible = "fsl,bman-portal"; + reg = <0x9c000 0x4000>, <0x1027000 0x1000>; + interrupts = <391 2 0 0>; + }; + bman-portal@a0000 { + compatible = "fsl,bman-portal"; + reg = <0xa0000 0x4000>, <0x1028000 0x1000>; + interrupts = <393 2 0 0>; + }; + bman-portal@a4000 { + compatible = "fsl,bman-portal"; + reg = <0xa4000 0x4000>, <0x1029000 0x1000>; + interrupts = <395 2 0 0>; + }; + bman-portal@a8000 { + compatible = "fsl,bman-portal"; + reg = <0xa8000 0x4000>, <0x102a000 0x1000>; + interrupts = <397 2 0 0>; + }; + bman-portal@ac000 { + compatible = "fsl,bman-portal"; + reg = <0xac000 0x4000>, <0x102b000 0x1000>; + interrupts = <399 2 0 0>; + }; + bman-portal@b0000 { + compatible = "fsl,bman-portal"; + reg = <0xb0000 0x4000>, <0x102c000 0x1000>; + interrupts = <401 2 0 0>; + }; + bman-portal@b4000 { + compatible = "fsl,bman-portal"; + reg = <0xb4000 0x4000>, <0x102d000 0x1000>; + interrupts = <403 2 0 0>; + }; + bman-portal@b8000 { + compatible = "fsl,bman-portal"; + reg = <0xb8000 0x4000>, <0x102e000 0x1000>; + interrupts = <405 2 0 0>; + }; + bman-portal@bc000 { + compatible = "fsl,bman-portal"; + reg = <0xbc000 0x4000>, <0x102f000 0x1000>; + interrupts = <407 2 0 0>; + }; + bman-portal@c0000 { + compatible = "fsl,bman-portal"; + reg = <0xc0000 0x4000>, <0x1030000 0x1000>; + interrupts = <409 2 0 0>; + }; + bman-portal@c4000 { + compatible = "fsl,bman-portal"; + reg = <0xc4000 0x4000>, <0x1031000 0x1000>; + interrupts = <411 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <116 0x2 0 0>; + cell-index = <0x6>; + }; + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <118 0x2 0 0>; + cell-index = <0x7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <120 0x2 0 0>; + cell-index = <0x8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <122 0x2 0 0>; + cell-index = <0x9>; + }; + qportal10: qman-portal@28000 { + compatible = "fsl,qman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <124 0x2 0 0>; + cell-index = <0xa>; + }; + qportal11: qman-portal@2c000 { + compatible = "fsl,qman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <126 0x2 0 0>; + cell-index = <0xb>; + }; + qportal12: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <128 0x2 0 0>; + cell-index = <0xc>; + }; + qportal13: qman-portal@34000 { + compatible = "fsl,qman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <130 0x2 0 0>; + cell-index = <0xd>; + }; + qportal14: qman-portal@38000 { + compatible = "fsl,qman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <132 0x2 0 0>; + cell-index = <0xe>; + }; + qportal15: qman-portal@3c000 { + compatible = "fsl,qman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <134 0x2 0 0>; + cell-index = <0xf>; + }; + qportal16: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <136 0x2 0 0>; + cell-index = <0x10>; + }; + qportal17: qman-portal@44000 { + compatible = "fsl,qman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <138 0x2 0 0>; + cell-index = <0x11>; + }; + qportal18: qman-portal@48000 { + compatible = "fsl,qman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <140 0x2 0 0>; + cell-index = <0x12>; + }; + qportal19: qman-portal@4c000 { + compatible = "fsl,qman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <142 0x2 0 0>; + cell-index = <0x13>; + }; + qportal20: qman-portal@50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <144 0x2 0 0>; + cell-index = <0x14>; + }; + qportal21: qman-portal@54000 { + compatible = "fsl,qman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <146 0x2 0 0>; + cell-index = <0x15>; + }; + qportal22: qman-portal@58000 { + compatible = "fsl,qman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <148 0x2 0 0>; + cell-index = <0x16>; + }; + qportal23: qman-portal@5c000 { + compatible = "fsl,qman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <150 0x2 0 0>; + cell-index = <0x17>; + }; + qportal24: qman-portal@60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <152 0x2 0 0>; + cell-index = <0x18>; + }; + qportal25: qman-portal@64000 { + compatible = "fsl,qman-portal"; + reg = <0x64000 0x4000>, <0x1019000 0x1000>; + interrupts = <154 0x2 0 0>; + cell-index = <0x19>; + }; + qportal26: qman-portal@68000 { + compatible = "fsl,qman-portal"; + reg = <0x68000 0x4000>, <0x101a000 0x1000>; + interrupts = <156 0x2 0 0>; + cell-index = <0x1a>; + }; + qportal27: qman-portal@6c000 { + compatible = "fsl,qman-portal"; + reg = <0x6c000 0x4000>, <0x101b000 0x1000>; + interrupts = <158 0x2 0 0>; + cell-index = <0x1b>; + }; + qportal28: qman-portal@70000 { + compatible = "fsl,qman-portal"; + reg = <0x70000 0x4000>, <0x101c000 0x1000>; + interrupts = <160 0x2 0 0>; + cell-index = <0x1c>; + }; + qportal29: qman-portal@74000 { + compatible = "fsl,qman-portal"; + reg = <0x74000 0x4000>, <0x101d000 0x1000>; + interrupts = <162 0x2 0 0>; + cell-index = <0x1d>; + }; + qportal30: qman-portal@78000 { + compatible = "fsl,qman-portal"; + reg = <0x78000 0x4000>, <0x101e000 0x1000>; + interrupts = <164 0x2 0 0>; + cell-index = <0x1e>; + }; + qportal31: qman-portal@7c000 { + compatible = "fsl,qman-portal"; + reg = <0x7c000 0x4000>, <0x101f000 0x1000>; + interrupts = <166 0x2 0 0>; + cell-index = <0x1f>; + }; + qportal32: qman-portal@80000 { + compatible = "fsl,qman-portal"; + reg = <0x80000 0x4000>, <0x1020000 0x1000>; + interrupts = <168 0x2 0 0>; + cell-index = <0x20>; + }; + qportal33: qman-portal@84000 { + compatible = "fsl,qman-portal"; + reg = <0x84000 0x4000>, <0x1021000 0x1000>; + interrupts = <170 0x2 0 0>; + cell-index = <0x21>; + }; + qportal34: qman-portal@88000 { + compatible = "fsl,qman-portal"; + reg = <0x88000 0x4000>, <0x1022000 0x1000>; + interrupts = <172 0x2 0 0>; + cell-index = <0x22>; + }; + qportal35: qman-portal@8c000 { + compatible = "fsl,qman-portal"; + reg = <0x8c000 0x4000>, <0x1023000 0x1000>; + interrupts = <174 0x2 0 0>; + cell-index = <0x23>; + }; + qportal36: qman-portal@90000 { + compatible = "fsl,qman-portal"; + reg = <0x90000 0x4000>, <0x1024000 0x1000>; + interrupts = <384 0x2 0 0>; + cell-index = <0x24>; + }; + qportal37: qman-portal@94000 { + compatible = "fsl,qman-portal"; + reg = <0x94000 0x4000>, <0x1025000 0x1000>; + interrupts = <386 0x2 0 0>; + cell-index = <0x25>; + }; + qportal38: qman-portal@98000 { + compatible = "fsl,qman-portal"; + reg = <0x98000 0x4000>, <0x1026000 0x1000>; + interrupts = <388 0x2 0 0>; + cell-index = <0x26>; + }; + qportal39: qman-portal@9c000 { + compatible = "fsl,qman-portal"; + reg = <0x9c000 0x4000>, <0x1027000 0x1000>; + interrupts = <390 0x2 0 0>; + cell-index = <0x27>; + }; + qportal40: qman-portal@a0000 { + compatible = "fsl,qman-portal"; + reg = <0xa0000 0x4000>, <0x1028000 0x1000>; + interrupts = <392 0x2 0 0>; + cell-index = <0x28>; + }; + qportal41: qman-portal@a4000 { + compatible = "fsl,qman-portal"; + reg = <0xa4000 0x4000>, <0x1029000 0x1000>; + interrupts = <394 0x2 0 0>; + cell-index = <0x29>; + }; + qportal42: qman-portal@a8000 { + compatible = "fsl,qman-portal"; + reg = <0xa8000 0x4000>, <0x102a000 0x1000>; + interrupts = <396 0x2 0 0>; + cell-index = <0x2a>; + }; + qportal43: qman-portal@ac000 { + compatible = "fsl,qman-portal"; + reg = <0xac000 0x4000>, <0x102b000 0x1000>; + interrupts = <398 0x2 0 0>; + cell-index = <0x2b>; + }; + qportal44: qman-portal@b0000 { + compatible = "fsl,qman-portal"; + reg = <0xb0000 0x4000>, <0x102c000 0x1000>; + interrupts = <400 0x2 0 0>; + cell-index = <0x2c>; + }; + qportal45: qman-portal@b4000 { + compatible = "fsl,qman-portal"; + reg = <0xb4000 0x4000>, <0x102d000 0x1000>; + interrupts = <402 0x2 0 0>; + cell-index = <0x2d>; + }; + qportal46: qman-portal@b8000 { + compatible = "fsl,qman-portal"; + reg = <0xb8000 0x4000>, <0x102e000 0x1000>; + interrupts = <404 0x2 0 0>; + cell-index = <0x2e>; + }; + qportal47: qman-portal@bc000 { + compatible = "fsl,qman-portal"; + reg = <0xbc000 0x4000>, <0x102f000 0x1000>; + interrupts = <406 0x2 0 0>; + cell-index = <0x2f>; + }; + qportal48: qman-portal@c0000 { + compatible = "fsl,qman-portal"; + reg = <0xc0000 0x4000>, <0x1030000 0x1000>; + interrupts = <408 0x2 0 0>; + cell-index = <0x30>; + }; + qportal49: qman-portal@c4000 { + compatible = "fsl,qman-portal"; + reg = <0xc4000 0x4000>, <0x1031000 0x1000>; + interrupts = <410 0x2 0 0>; + cell-index = <0x31>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + ddr3: memory-controller@a000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0xa000 0x1000>; + interrupts = <16 2 1 21>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t4240-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x6000>; + fsl,portid-mapping = <0x8000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t4240-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t4240-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "elo3-dma-2.dtsi" + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t4240-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-qman3.dtsi" +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-1-10g-1.dtsi" + fman@500000 { + enet8: ethernet@e0000 { + }; + + enet9: ethernet@e2000 { + }; + + enet10: ethernet@e4000 { + }; + + enet11: ethernet@e6000 { + }; + + enet12: ethernet@e8000 { + }; + + enet13: ethernet@ea000 { + }; + + enet14: ethernet@f0000 { + }; + + enet15: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + + L2_1: l2-cache-controller@c20000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; + L2_2: l2-cache-controller@c60000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xc60000 0x40000>; + next-level-cache = <&cpc>; + }; + L2_3: l2-cache-controller@ca0000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xca0000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi new file mode 100644 index 000000000..632314c6f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -0,0 +1,175 @@ +/* + * T4240 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,T4240"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + crypto = &crypto; + + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; + ethernet12 = &enet12; + ethernet13 = &enet13; + ethernet14 = &enet14; + ethernet15 = &enet15; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&clockgen 1 0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu4: PowerPC,e6500@8 { + device_type = "cpu"; + reg = <8 9>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu5: PowerPC,e6500@10 { + device_type = "cpu"; + reg = <10 11>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu6: PowerPC,e6500@12 { + device_type = "cpu"; + reg = <12 13>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu7: PowerPC,e6500@14 { + device_type = "cpu"; + reg = <14 15>; + clocks = <&clockgen 1 1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu8: PowerPC,e6500@16 { + device_type = "cpu"; + reg = <16 17>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu9: PowerPC,e6500@18 { + device_type = "cpu"; + reg = <18 19>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu10: PowerPC,e6500@20 { + device_type = "cpu"; + reg = <20 21>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu11: PowerPC,e6500@22 { + device_type = "cpu"; + reg = <22 23>; + clocks = <&clockgen 1 2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsp2.dts b/arch/powerpc/boot/dts/fsp2.dts new file mode 100644 index 000000000..9311b86b1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsp2.dts @@ -0,0 +1,613 @@ +/* + * Device Tree Source for FSP2 + * + * Copyright 2010,2012 IBM Corp. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,fsp2"; + compatible = "ibm,fsp2"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC, 476FSP2"; + reg = <0x0>; + clock-frequency = <0>; /* Filled in by cuboot */ + timebase-frequency = <0>; /* Filled in by cuboot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by + cuboot */ + }; + + clocks { + mmc_clk: mmc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "mmc_clk"; + }; + }; + + UIC0: uic0 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x2c0 0x8>; + }; + + /* "interrupts" field is + first pair is non-critical, second is critical */ + UIC1_0: uic1_0 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x2c8 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <21 0x4 4 0x84>; + }; + + /* PSI and DMA */ + UIC1_1: uic1_1 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x350 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <22 0x4 5 0x84>; + }; + + /* Ethernet and USB */ + UIC1_2: uic1_2 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x358 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <23 0x4 6 0x84>; + }; + + /* PLB Errors */ + UIC1_3: uic1_3 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <4>; + dcr-reg = <0x360 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <24 0x4 7 0x84>; + }; + + UIC1_4: uic1_4 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <5>; + dcr-reg = <0x368 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <25 0x4 8 0x84>; + }; + + UIC1_5: uic1_5 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <6>; + dcr-reg = <0x370 0x8>; + interrupt-parent = <&UIC0>; + interrupts = <26 0x4 9 0x84>; + }; + + /* 2nd level UICs for FSI */ + UIC2_0: uic2_0 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <7>; + dcr-reg = <0x2d0 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <16 0x4 0 0x84>; + }; + + UIC2_1: uic2_1 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <8>; + dcr-reg = <0x2d8 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <17 0x4 1 0x84>; + }; + + UIC2_2: uic2_2 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <9>; + dcr-reg = <0x2e0 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <18 0x4 2 0x84>; + }; + + UIC2_3: uic2_3 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <10>; + dcr-reg = <0x2e8 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <19 0x4 3 0x84>; + }; + + UIC2_4: uic2_4 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <11>; + dcr-reg = <0x2f0 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <20 0x4 4 0x84>; + }; + + UIC2_5: uic2_5 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <12>; + dcr-reg = <0x2f8 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <21 0x4 5 0x84>; + }; + + UIC2_6: uic2_6 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <13>; + dcr-reg = <0x300 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <22 0x4 6 0x84>; + }; + + UIC2_7: uic2_7 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <14>; + dcr-reg = <0x308 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <23 0x4 7 0x84>; + }; + + UIC2_8: uic2_8 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <15>; + dcr-reg = <0x310 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <24 0x4 8 0x84>; + }; + + UIC2_9: uic2_9 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <16>; + dcr-reg = <0x318 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <25 0x4 9 0x84>; + }; + + UIC2_10: uic2_10 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <17>; + dcr-reg = <0x320 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <26 0x4 10 0x84>; + }; + + UIC2_11: uic2_11 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <18>; + dcr-reg = <0x328 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <27 0x4 11 0x84>; + }; + + UIC2_12: uic2_12 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <19>; + dcr-reg = <0x330 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <28 0x4 12 0x84>; + }; + + UIC2_13: uic2_13 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <20>; + dcr-reg = <0x338 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <29 0x4 13 0x84>; + }; + + UIC2_14: uic2_14 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <21>; + dcr-reg = <0x340 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <30 0x4 14 0x84>; + }; + + UIC2_15: uic2_15 { + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <22>; + dcr-reg = <0x348 0x8>; + interrupt-parent = <&UIC1_0>; + interrupts = <31 0x4 15 0x84>; + }; + + plb6 { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + MCW0: memory-controller-wrapper { + compatible = "ibm,cw-476fsp2"; + dcr-reg = <0x11111800 0x40>; + }; + + MCIF0: memory-controller { + compatible = "ibm,sdram-476fsp2", "ibm,sdram-4xx-ddr3"; + dcr-reg = <0x11120000 0x10000>; + mcer-device = <&MCW0>; + interrupt-parent = <&UIC0>; + interrupts = <10 0x84 /* ECC UE */ + 11 0x84>; /* ECC CE */ + }; + }; + + plb4 { + compatible = "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000010 0x00000000 0x80000000 + 0x80000000 0x00000010 0x80000000 0x80000000>; + clock-frequency = <333333334>; + + plb6-system-hung-irq { + compatible = "ibm,bus-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <0 0x84>; + }; + + l2-error-irq { + compatible = "ibm,bus-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <20 0x84>; + }; + + plb6-plb4-irq { + compatible = "ibm,bus-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <1 0x84>; + }; + + plb4-ahb-irq { + compatible = "ibm,bus-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC1_3>; + interrupts = <20 0x84>; + }; + + opbd-error-irq { + compatible = "ibm,opbd-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC1_4>; + interrupts = <5 0x84>; + }; + + cmu-error-irq { + compatible = "ibm,cmu-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <28 0x84>; + }; + + conf-error-irq { + compatible = "ibm,conf-error-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC1_4>; + interrupts = <11 0x84>; + }; + + mc-ue-irq { + compatible = "ibm,mc-ue-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <10 0x84>; + }; + + reset-warning-irq { + compatible = "ibm,reset-warning-irq"; + #interrupt-cells = <2>; + interrupt-parent = <&UIC0>; + interrupts = <17 0x84>; + }; + + MAL0: mcmal0 { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + compatible = "ibm,mcmal"; + dcr-reg = <0x80 0x80>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + /* index interrupt-parent interrupt# type */ + interrupt-map = ; + }; + + MAL1: mcmal1 { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + compatible = "ibm,mcmal"; + dcr-reg = <0x100 0x80>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&MAL1>; + interrupts = <0 1 2 3 4>; + /* index interrupt-parent interrupt# type */ + interrupt-map = ; + }; + + mmc0: mmc@20c0000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + reg = <0x020c0000 0x20000>; + reg-names = "mmc"; + interrupts = <21 0x4>; + interrupt-parent = <&UIC1_3>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clock-names = "mmc"; + clocks = <&mmc_clk>; + bus-width = <4>; + non-removable; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + + opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges; // pass-thru to parent bus + clock-frequency = <83333334>; + + EMAC0: ethernet@b0000000 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac4sync"; + has-inverted-stacr-oc; + interrupt-parent = <&UIC1_2>; + interrupts = <1 0x4 0 0x4>; + reg = <0xb0000000 0x100>; + local-mac-address = [000000000000]; /* Filled in by + cuboot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <4096>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <8192>; + phy-address = <1>; + phy-mode = "rgmii"; + phy-map = <00000003>; + rgmii-device = <&RGMII>; + rgmii-channel = <0>; + }; + + EMAC1: ethernet@b0000100 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac4sync"; + has-inverted-stacr-oc; + interrupt-parent = <&UIC1_2>; + interrupts = <9 0x4 8 0x4>; + reg = <0xb0000100 0x100>; + local-mac-address = [000000000000]; /* Filled in by + cuboot */ + mal-device = <&MAL1>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <4096>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <8192>; + phy-address = <2>; + phy-mode = "rgmii"; + phy-map = <00000003>; + rgmii-device = <&RGMII>; + rgmii-channel = <1>; + }; + + RGMII: rgmii@b0000600 { + compatible = "ibm,rgmii"; + has-mdio; + reg = <0xb0000600 0x8>; + }; + + UART0: serial@b0020000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xb0020000 0x8>; + virtual-reg = <0xb0020000>; + clock-frequency = <20833333>; + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <31 0x4>; + }; + }; + + OHCI1: ohci@2040000 { + compatible = "ohci-le"; + reg = <0x02040000 0xa0>; + interrupt-parent = <&UIC1_3>; + interrupts = <28 0x8 29 0x8>; + }; + + OHCI2: ohci@2080000 { + compatible = "ohci-le"; + reg = <0x02080000 0xa0>; + interrupt-parent = <&UIC1_3>; + interrupts = <30 0x8 31 0x8>; + }; + + EHCI: ehci@2000000 { + compatible = "usb-ehci"; + reg = <0x02000000 0xa4>; + interrupt-parent = <&UIC1_3>; + interrupts = <23 0x4>; + }; + + }; + + chosen { + stdout-path = "/plb/opb/serial@b0020000"; + bootargs = "console=ttyS0,115200 rw log_buf_len=32768 debug"; + }; +}; diff --git a/arch/powerpc/boot/dts/gamecube.dts b/arch/powerpc/boot/dts/gamecube.dts new file mode 100644 index 000000000..a564cb7cb --- /dev/null +++ b/arch/powerpc/boot/dts/gamecube.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/boot/dts/gamecube.dts + * + * Nintendo GameCube platform device tree source + * Copyright (C) 2007-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + */ + +/dts-v1/; + +/ { + model = "nintendo,gamecube"; + compatible = "nintendo,gamecube"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,gekko@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <486000000>; /* 486MHz */ + bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */ + timebase-frequency = <40500000>; /* 162MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained int the flipper chipset */ + flipper { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper"; + ranges = <0x0c000000 0x0c000000 0x00010000>; + interrupt-parent = <&PIC>; + + video@c002000 { + compatible = "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@c003000 { + compatible = "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC: pic { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + + memory@0 { + compatible = "nintendo,flipper-aram"; + reg = <0 0x1000000>; /* 16MB */ + }; + }; + + disk@c006000 { + compatible = "nintendo,flipper-di"; + reg = <0x0c006000 0x40>; + interrupts = <2>; + }; + + audio@c006c00 { + compatible = "nintendo,flipper-ai"; + reg = <0x0c006c00 0x20>; + interrupts = <6>; + }; + + gamepad-controller@c006400 { + compatible = "nintendo,flipper-si"; + reg = <0x0c006400 0x100>; + interrupts = <3>; + }; + + /* External Interface bus */ + exi@c006800 { + compatible = "nintendo,flipper-exi"; + reg = <0x0c006800 0x40>; + virtual-reg = <0x0c006800>; + interrupts = <4>; + }; + }; +}; + diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts new file mode 100644 index 000000000..e84ff1afb --- /dev/null +++ b/arch/powerpc/boot/dts/glacier.dts @@ -0,0 +1,576 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008-2010 DENX Software Engineering, Stefan Roese + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto", + "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <28 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <29 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601600 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef601200 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pcie@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts new file mode 100644 index 000000000..02bd304c7 --- /dev/null +++ b/arch/powerpc/boot/dts/holly.dts @@ -0,0 +1,196 @@ +/* + * Device Tree Source for IBM Holly (PPC 750CL with TSI controller) + * Copyright 2007, IBM Corporation + * + * Stephen Winiecki + * Josh Boyer + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "41K7339"; + compatible = "ibm,holly"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells =<0>; + PowerPC,750CL@0 { + device_type = "cpu"; + reg = <0x00000000>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + d-cache-sets = <128>; + i-cache-sets = <128>; + timebase-frequency = <50000000>; + clock-frequency = <600000000>; + bus-frequency = <200000000>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + tsi109@c0000000 { + device_type = "tsi-bridge"; + compatible = "tsi109-bridge", "tsi108-bridge"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xc0000000 0x00010000>; + reg = <0xc0000000 0x00010000>; + + i2c@7000 { + device_type = "i2c"; + compatible = "tsi109-i2c", "tsi108-i2c"; + interrupt-parent = <&MPIC>; + interrupts = <0xe 0x2>; + reg = <0x00007000 0x00000400>; + }; + + MDIO: mdio@6000 { + compatible = "tsi109-mdio", "tsi108-mdio"; + reg = <0x00006000 0x00000050>; + #address-cells = <1>; + #size-cells = <0>; + + PHY1: ethernet-phy@1 { + compatible = "bcm5461a"; + reg = <0x00000001>; + txc-rxc-delay-disable; + }; + + PHY2: ethernet-phy@2 { + compatible = "bcm5461a"; + reg = <0x00000002>; + txc-rxc-delay-disable; + }; + }; + + ethernet@6200 { + device_type = "network"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00006000 0x00000200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&MPIC>; + interrupts = <0x10 0x2>; + mdio-handle = <&MDIO>; + phy-handle = <&PHY1>; + }; + + ethernet@6600 { + device_type = "network"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00006400 0x00000200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&MPIC>; + interrupts = <0x11 0x2>; + mdio-handle = <&MDIO>; + phy-handle = <&PHY2>; + }; + + serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x00007808 0x00000200>; + virtual-reg = <0xc0007808>; + clock-frequency = <1067212800>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0xc 0x2>; + }; + + serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x00007c08 0x00000200>; + virtual-reg = <0xc0007c08>; + clock-frequency = <1067212800>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0xd 0x2>; + }; + + MPIC: pic@7400 { + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x00007400 0x00000400>; + big-endian; + }; + }; + + pci@c0001000 { + device_type = "pci"; + compatible = "tsi109-pci", "tsi108-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xc0001000 0x00001000>; + bus-range = <0x0 0x0>; + /*----------------------------------------------------+ + | PCI memory range. + | 01 denotes I/O space + | 02 denotes 32-bit memory space + +----------------------------------------------------*/ + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; + interrupt-parent = <&MPIC>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + /*----------------------------------------------------+ + | The INTA, INTB, INTC, INTD are shared. + +----------------------------------------------------*/ + interrupt-map = < + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + device_type = "pic-router"; + interrupt-controller; + big-endian; + clock-frequency = <0>; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x17 0x2>; + interrupt-parent = <&MPIC>; + }; + }; + + chosen { + stdout-path = "/tsi109@c0000000/serial@7808"; + }; +}; diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts new file mode 100644 index 000000000..4fd7a4fbb --- /dev/null +++ b/arch/powerpc/boot/dts/icon.dts @@ -0,0 +1,440 @@ +/* + * Device Tree Source for Mosaix Technologies, Inc. ICON board + * + * Copyright 2010 DENX Software Engineering, Stefan Roese + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "mosaixtech,icon"; + compatible = "mosaixtech,icon"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <0x00c 0x002>; + }; + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + /* addr-child addr-parent size */ + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@f0000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000200 0x00000008>; + virtual-reg = <0xa0000200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@f0000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000300 0x00000008>; + virtual-reg = <0xa0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + + UART2: serial@f0000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000600 0x00000008>; + virtual-reg = <0xa0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x5 0x4>; + }; + + IIC0: i2c@f0000400 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@f0000500 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + EMAC0: ethernet@f0000800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xf0000800 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "gmii"; + phy-map = <0x00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>; + }; + + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pcie@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x20 to 0x2f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@f0000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts new file mode 100644 index 000000000..c9f90f1a9 --- /dev/null +++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts @@ -0,0 +1,155 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer , David Gibson + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,iss-4xx"; + compatible = "ibm,iss-4xx"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <0>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "okay"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <1>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00100>; + }; + cpu@2 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <2>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00200>; + }; + cpu@3 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <3>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00300>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00030000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + clock-frequency = <0>; // Filled in by zImage + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0x0 0x2>; + }; + }; + }; + + nvrtc { + compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; + reg = <0 0xEF703000 0x2000>; + }; + iss-block { + compatible = "ibm,iss-sim-block-device"; + reg = <0 0xEF701000 0x1000>; + }; + + chosen { + stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/iss4xx.dts b/arch/powerpc/boot/dts/iss4xx.dts new file mode 100644 index 000000000..5533aff25 --- /dev/null +++ b/arch/powerpc/boot/dts/iss4xx.dts @@ -0,0 +1,116 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer , David Gibson + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,iss-4xx"; + compatible = "ibm,iss-4xx"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <0x00000000>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; // may need fixup in sim + d-cache-line-size = <32>; // may need fixup in sim + i-cache-size = <32768>; /* may need fixup in sim */ + d-cache-size = <32768>; /* may need fixup in sim */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-4xx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-4xx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + clock-frequency = <0>; // Filled in by zImage + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + }; + }; + + nvrtc { + compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; + reg = <0 0xEF703000 0x2000>; + }; + iss-block { + compatible = "ibm,iss-sim-block-device"; + reg = <0 0xEF701000 0x1000>; + }; + + chosen { + stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts new file mode 100644 index 000000000..4262b2bbd --- /dev/null +++ b/arch/powerpc/boot/dts/katmai.dts @@ -0,0 +1,492 @@ +/* + * Device Tree Source for AMCC Katmai eval board + * + * Copyright (c) 2006, 2007 IBM Corp. + * Benjamin Herrenschmidt + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "amcc,katmai"; + compatible = "amcc,katmai"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <0x00c 0x002>; + }; + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + /* addr-child addr-parent size */ + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@f0000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000200 0x00000008>; + virtual-reg = <0xa0000200>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@f0000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000300 0x00000008>; + virtual-reg = <0xa0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + + UART2: serial@f0000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000600 0x00000008>; + virtual-reg = <0xa0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x5 0x4>; + }; + + IIC0: i2c@f0000400 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@f0000500 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + EMAC0: ethernet@f0000800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xf0000800 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "gmii"; + phy-map = <0x00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* + * On Katmai, the following PCI-X interrupts signals + * have to be enabled via jumpers (only INTA is + * enabled per default): + * + * INTB: J3: 1-2 + * INTC: J2: 1-2 + * INTD: J1: 1-2 + */ + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 + 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 + 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 + 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 + >; + }; + + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pcie@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x20 to 0x2f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pcie@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x30 to 0x3f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; + }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@f0000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts new file mode 100644 index 000000000..154f5d293 --- /dev/null +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -0,0 +1,528 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Keymile KMETER1 Device Tree Source + * + * 2008-2011 DENX Software Engineering GmbH + */ + +/dts-v1/; + +/ { + model = "KMETER1"; + compatible = "keymile,KMETER1"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet_piggy2; + ethernet1 = &enet_estar1; + ethernet2 = &enet_estar2; + ethernet3 = &enet_eth1; + ethernet4 = &enet_eth2; + ethernet5 = &enet_eth3; + ethernet6 = &enet_eth4; + serial0 = &serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + clock-frequency = <0>; /* Filled in by U-Boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8360-immr", "simple-bus"; + ranges = <0x0 0xe0000000 0x00200000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; /* Filled in by U-Boot */ + + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,mpc8313-i2c","fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <400000>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <264000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + ipic: pic@700 { + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "fsl,pq2pro-pic", "fsl,ipic"; + interrupt-controller; + reg = <0x700 0x100>; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + compatible = "fsl,mpc8360-par_io"; + num-ports = <7>; + + qe_pio_c: gpio-controller@30 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1430 0x18>; + gpio-controller; + }; + pio_ucc1: ucc_pin@0 { + reg = <0>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 10 2 0 1 0 /* RxD1 */ + 0 11 2 0 1 0 /* RxD2 */ + 0 12 2 0 1 0 /* RxD3 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 15 2 0 1 0 /* RX_DV */ + 0 16 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0 /* GTX125 - CLK9 */ + >; + }; + + pio_ucc2: ucc_pin@1 { + reg = <1>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 17 1 0 1 0 /* TxD0 */ + 0 18 1 0 1 0 /* TxD1 */ + 0 19 1 0 1 0 /* TxD2 */ + 0 20 1 0 1 0 /* TxD3 */ + 0 23 2 0 1 0 /* RxD0 */ + 0 24 2 0 1 0 /* RxD1 */ + 0 25 2 0 1 0 /* RxD2 */ + 0 26 2 0 1 0 /* RxD3 */ + 0 21 1 0 1 0 /* TX_EN */ + 0 22 1 0 1 0 /* TX_ER */ + 0 29 2 0 1 0 /* RX_DV */ + 0 30 2 0 1 0 /* RX_ER */ + 0 31 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + >; + }; + + pio_ucc4: ucc_pin@3 { + reg = <3>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ + 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ + 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ + 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ + 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ + 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ + 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ + + 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ + >; + }; + + pio_ucc5: ucc_pin@4 { + reg = <4>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ + 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ + 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ + 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ + 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ + 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ + 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ + >; + }; + + pio_ucc6: ucc_pin@5 { + reg = <5>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ + 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ + 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ + 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ + 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ + 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ + 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ + >; + }; + + pio_ucc7: ucc_pin@6 { + reg = <6>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ + 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ + 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ + 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ + 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ + 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ + 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ + >; + }; + + pio_ucc8: ucc_pin@7 { + reg = <7>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ + 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ + 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ + 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ + 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ + 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ + 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ + + 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ + >; + }; + + }; + + qe@100000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe"; + ranges = <0x0 0x100000 0x100000>; + reg = <0x100000 0x480>; + clock-frequency = <0>; /* Filled in by U-Boot */ + brg-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x0000c000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0xc000>; + }; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + enet_estar1: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy_estar1>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc1>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + enet_estar2: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy_estar2>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc2>; + }; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + enet_piggy2: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + phy-handle = <&phy_piggy2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc4>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + enet_eth1: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth1>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc5>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + enet_eth2: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc6>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + enet_eth3: ucc@2600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth3>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc7>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + enet_eth4: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth4>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc8>; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + phy_piggy2: ethernet-phy@0 { + reg = <0x0>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + phy_eth1: ethernet-phy@8 { + reg = <0x08>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + phy_eth2: ethernet-phy@9 { + reg = <0x09>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + phy_eth3: ethernet-phy@a { + reg = <0x0a>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + phy_eth4: ethernet-phy@b { + reg = <0x0b>; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + phy_estar1: ethernet-phy@10 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x10>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + phy_estar2: ethernet-phy@11 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x11>; + }; + }; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = < + 32 0x8 + 33 0x8 + 34 0x8 + 35 0x8 + 40 0x8 + 41 0x8 + 42 0x8 + 43 0x8 + >; + interrupt-parent = <&ipic>; + }; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */ + 1 0 0xe8000000 0x01000000 /* LB 1 */ + 3 0 0xa0000000 0x10000000>; /* LB 3 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + partition@0 { /* 768KB */ + label = "u-boot"; + reg = <0 0xC0000>; + }; + partition@c0000 { /* 128KB */ + label = "env"; + reg = <0xC0000 0x20000>; + }; + partition@e0000 { /* 128KB */ + label = "envred"; + reg = <0xE0000 0x20000>; + }; + partition@100000 { /* 64512KB */ + label = "ubi0"; + reg = <0x100000 0x3F00000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts new file mode 100644 index 000000000..37a7eb576 --- /dev/null +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -0,0 +1,346 @@ +/* + * Device Tree Source for Emerson KSI8560 + * + * Author: Alexandr Smirnov + * + * Based on mpc8560ads.dts + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "KSI8560"; + compatible = "emerson,KSI8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <0>; /* From U-boot */ + bus-frequency = <0>; /* From U-boot */ + clock-frequency = <0>; /* From U-boot */ + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */ + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xfdf00000 0x00100000>; + bus-frequency = <0>; /* Fixed by bootwrapper */ + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; /* 32 bytes */ + cache-size = <0x40000>; /* L2, 256K */ + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&PHY1>; + + mdio@520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + reg = <0x1>; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&PHY2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; /* 166MHz */ + }; + + CPMPIC: pic@90c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0x2e 0x2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <0x1c200>; + interrupts = <0x28 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <0x1c200>; + interrupts = <0x29 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + mdio@90d00 { /* For FCCs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x90d00 0x14>; + fsl,mdio-pin = <24>; + fsl,mdc-pin = <25>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + reg = <0x0>; + }; + }; + + enet2: ethernet@91300 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x12000300>; + interrupts = <0x20 0x8>; + interrupt-parent = <&CPMPIC>; + phy-handle = <&PHY0>; + }; + }; + }; + + localbus@fdf05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8560-localbus", "simple-bus"; + reg = <0xfdf05000 0x68>; + + ranges = <0x0 0x0 0xe0000000 0x00800000 + 0x4 0x0 0xe8080000 0x00080000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <0x2>; + + partition@0 { + label = "Primary Kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "Primary Filesystem"; + reg = <0x180000 0x580000>; + }; + partition@700000 { + label = "Monitor"; + reg = <0x300000 0x100000>; + read-only; + }; + }; + + cpld@4,0 { + compatible = "emerson,KSI8560-cpld"; + reg = <0x4 0x0 0x80000>; + }; + }; + + + chosen { + stdout-path = "/soc/cpm/serial@91a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 000000000..0a4545159 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,147 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + + */ + +/dts-v1/; + +/ { + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + device_type = "cpu"; + reg = <0x0>; + clock-frequency = <200000000>; /* Fixed by bootloader */ + timebase-frequency = <24391680>; /* Fixed by bootloader */ + bus-frequency = <0>; /* Fixed by bootloader */ + /* Following required by dtc but not used */ + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ + + i2c@80003000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x80003000 0x1000>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial0: serial@80004500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004500 0x8>; + clock-frequency = <97553800>; + current-speed = <9600>; + interrupts = <9 0>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@80004600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004600 0x8>; + clock-frequency = <97553800>; + current-speed = <57600>; + interrupts = <10 0>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@80040000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x80040000 0x40000>; + }; + + pci0: pci@fec00000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 11 - IRQ0 ETH */ + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 + /* IDSEL 12 - IRQ1 IDE0 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 + /* IDSEL 14 - IRQ3 USB2.0 */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts new file mode 100644 index 000000000..0e758b347 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -0,0 +1,147 @@ +/* + * Device Tree Souce for Buffalo KuroboxHG + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + + */ + +/dts-v1/; + +/ { + model = "KuroboxHG"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + device_type = "cpu"; + reg = <0x0>; + clock-frequency = <266000000>; /* Fixed by bootloader */ + timebase-frequency = <32522240>; /* Fixed by bootloader */ + bus-frequency = <0>; /* Fixed by bootloader */ + /* Following required by dtc but not used */ + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ + + i2c@80003000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x80003000 0x1000>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial0: serial@80004500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004500 0x8>; + clock-frequency = <130041000>; + current-speed = <9600>; + interrupts = <9 0>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@80004600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004600 0x8>; + clock-frequency = <130041000>; + current-speed = <57600>; + interrupts = <10 0>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@80040000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x80040000 0x40000>; + }; + + pci0: pci@fec00000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 11 - IRQ0 ETH */ + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 + /* IDSEL 12 - IRQ1 IDE0 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 + /* IDSEL 14 - IRQ3 USB2.0 */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts new file mode 100644 index 000000000..b9d848781 --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Lite5200 board Device Tree Source + * + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * Grant Likely + */ + +/dts-v1/; + +/ { + model = "fsl,lite5200"; + compatible = "fsl,lite5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@c00 { + compatible = "fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + cell-index = <0>; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // compatible = "fsl,mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <0x2200 0x100>; + // interrupts = <2 2 0>; + //}; + + // PSC3 in CODEC mode example + //i2s@2400 { // PSC3 + // compatible = "fsl,mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <0x2400 0x100>; + // interrupts = <2 3 0>; + //}; + + // PSC4 in uart mode example + //serial@2600 { // PSC4 + // compatible = "fsl,mpc5200-psc-uart"; + // cell-index = <3>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; + //}; + + // PSC5 in uart mode example + //serial@2800 { // PSC5 + // compatible = "fsl,mpc5200-psc-uart"; + // cell-index = <4>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; + //}; + + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // compatible = "fsl,mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <0x2c00 0x100>; + // interrupts = <2 4 0>; + //}; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff000000 0x01000000>; + + flash@0,0 { + compatible = "amd,am29lv652d", "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts new file mode 100644 index 000000000..7e2d91c7c --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Lite5200B board Device Tree Source + * + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * Grant Likely + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/ { + model = "fsl,lite5200b"; + compatible = "fsl,lite5200b"; + + leds { + compatible = "gpio-leds"; + tmr2 { + gpios = <&gpt2 0 1>; + }; + tmr3 { + gpios = <&gpt3 0 1>; + linux,default-trigger = "heartbeat"; + }; + led1 { gpios = <&gpio_wkup 2 1>; }; + led2 { gpios = <&gpio_simple 3 1>; }; + led3 { gpios = <&gpio_wkup 3 1>; }; + led4 { gpios = <&gpio_simple 2 1>; }; + }; + + memory@0 { + reg = <0x00000000 0x10000000>; // 256MB + }; + + soc5200@f0000000 { + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <0>; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + // cell-index = <1>; + //}; + + // PSC3 in CODEC mode example + //i2s@2400 { // PSC3 + // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + //}; + + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + // cell-index = <5>; + //}; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + +}; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts new file mode 100644 index 000000000..96524ede1 --- /dev/null +++ b/arch/powerpc/boot/dts/media5200.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale Media5200 board Device Tree Source + * + * Copyright 2009 Secret Lab Technologies Ltd. + * Grant Likely + * Steven Cavanagh + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "fsl,media5200"; + compatible = "fsl,media5200"; + + aliases { + console = &console; + ethernet0 = ð0; + }; + + chosen { + stdout-path = &console; + }; + + cpus { + PowerPC,5200@0 { + timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot + bus-frequency = <132000000>; // 132 MHz + clock-frequency = <396000000>; // 396 MHz + }; + }; + + memory@0 { + reg = <0x00000000 0x08000000>; // 128MB RAM + }; + + soc5200@f0000000 { + bus-frequency = <132000000>;// 132 MHz + + psc@2000 { // PSC1 + status = "disabled"; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + // PSC6 in uart mode + console: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usb@1000 { + reg = <0x1000 0x100>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot + 0xc000 0 0 2 &media5200_fpga 0 3 + 0xc000 0 0 3 &media5200_fpga 0 4 + 0xc000 0 0 4 &media5200_fpga 0 5 + + 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot + 0xc800 0 0 2 &media5200_fpga 0 4 + 0xc800 0 0 3 &media5200_fpga 0 5 + 0xc800 0 0 4 &media5200_fpga 0 2 + + 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI + 0xd000 0 0 2 &media5200_fpga 0 5 + + 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP + >; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + interrupt-parent = <&mpc5200_pic>; + }; + + localbus { + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xfe000000 0x02000000 + 2 0 0xf0010000 0x00010000 + 3 0 0xf0020000 0x00010000 >; + flash@0,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + flash@1,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + media5200_fpga: fpga@2,0 { + compatible = "fsl,media5200-fpga"; + interrupt-controller; + #interrupt-cells = <2>; // 0:bank 1:id; no type field + reg = <2 0 0x10000>; + + interrupt-parent = <&mpc5200_pic>; + interrupts = <0 0 3 // IRQ bank 0 + 1 1 3>; // IRQ bank 1 + }; + + uart@3,0 { + compatible = "ti,tl16c752bpt"; + reg = <3 0 0x10000>; + interrupt-parent = <&media5200_fpga>; + interrupts = <0 0 0 1>; // 2 irqs + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts new file mode 100644 index 000000000..9cefed207 --- /dev/null +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the MGCOGE plattform from keymile + * + * Copyright 2008 DENX Software Engineering GmbH + * Heiko Schocher + */ + +/dts-v1/; +/ { + model = "MGCOGE"; + compatible = "keymile,km82xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + serial0 = &smc2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8247@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; /* Filled in by U-Boot */ + clock-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8247-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfe000000 0x00400000 + 1 0 0x30000000 0x00010000 + 2 0 0x40000000 0x00010000 + 5 0 0x50000000 0x04000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "u-boot"; + reg = <0x00000 0xC0000>; + }; + partition@1 { + label = "env"; + reg = <0xC0000 0x20000>; + }; + partition@2 { + label = "envred"; + reg = <0xE0000 0x20000>; + }; + partition@3 { + label = "free"; + reg = <0x100000 0x300000>; + }; + }; + + flash@5,0 { + compatible = "cfi-flash"; + reg = <5 0x00000000 0x02000000 + 5 0x02000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + partition@app { /* 64 MBytes */ + label = "ubi0"; + reg = <0x00000000 0x04000000>; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8247-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + compatible = "fsl,cpm-muram"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x80 0x1f80 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8247-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC2 */ + smc2: serial@11a90 { + device_type = "serial"; + compatible = "fsl,mpc8247-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a90 0x20 0x88fc 0x02>; + interrupts = <5 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x21200000>; + current-speed = <0>; /* Filled in by U-Boot */ + }; + + eth0: ethernet@11a60 { + device_type = "network"; + compatible = "fsl,mpc8247-scc-enet", + "fsl,cpm2-scc-enet"; + reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */ + interrupts = <43 8>; + interrupt-parent = <&PIC>; + linux,network-index = <0>; + fsl,cpm-command = <0xce00000>; + fixed-link = <0 0 10 0 0>; + }; + + i2c@11860 { + compatible = "fsl,mpc8272-i2c", + "fsl,cpm2-i2c"; + reg = <0x11860 0x20 0x8afc 0x2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <0x29600000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10d40 { + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x10d00 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* FCC1 management to switch */ + ethernet@11300 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; + local-mac-address = [ 00 01 02 03 04 07 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy0>; + linux,network-index = <1>; + fsl,cpm-command = <0x12000300>; + }; + + /* FCC2 to redundant core unit over backplane */ + ethernet@11320 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + local-mac-address = [ 00 01 02 03 04 08 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy1>; + linux,network-index = <2>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + mode = "peripheral"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + usb-clock = <5>; + }; + spi@11aa0 { + cell-index = <0>; + compatible = "fsl,spi", "fsl,cpm2-spi"; + reg = <0x11a80 0x40 0x89fc 0x2>; + interrupts = <2 8>; + interrupt-parent = <&PIC>; + cs-gpios = < &cpm2_pio_d 19 0>; + }; + + }; + + cpm2_pio_d: gpio-controller@10d60 { + #gpio-cells = <2>; + compatible = "fsl,cpm2-pario-bank"; + reg = <0x10d60 0x14>; + gpio-controller; + }; + + cpm2_pio_c: gpio-controller@10d40 { + #gpio-cells = <2>; + compatible = "fsl,cpm2-pario-bank"; + reg = <0x10d40 0x14>; + gpio-controller; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8247-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/microwatt.dts b/arch/powerpc/boot/dts/microwatt.dts new file mode 100644 index 000000000..292b909ca --- /dev/null +++ b/arch/powerpc/boot/dts/microwatt.dts @@ -0,0 +1,255 @@ +/dts-v1/; +#include + +/ { + #size-cells = <0x02>; + #address-cells = <0x02>; + model = "microwatt"; + compatible = "microwatt-soc"; + + aliases { + serial0 = &UART0; + ethernet = &enet0; + }; + + reserved-memory { + #size-cells = <0x02>; + #address-cells = <0x02>; + ranges; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x10000000>; + }; + + clocks { + sys_clk: litex_sys_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + }; + + cpus { + #size-cells = <0x00>; + #address-cells = <0x01>; + + ibm,powerpc-cpu-features { + display-name = "Microwatt"; + isa = <3100>; + device_type = "cpu-features"; + compatible = "ibm,powerpc-cpu-features"; + + mmu-radix { + isa = <3000>; + usable-privilege = <6>; + os-support = <0>; + }; + + little-endian { + isa = <0>; + usable-privilege = <7>; + os-support = <0>; + hwcap-bit-nr = <1>; + }; + + cache-inhibited-large-page { + isa = <0>; + usable-privilege = <6>; + os-support = <0>; + }; + + fixed-point-v3 { + isa = <3000>; + usable-privilege = <7>; + }; + + no-execute { + isa = <0x00>; + usable-privilege = <2>; + os-support = <0>; + }; + + floating-point { + hfscr-bit-nr = <0>; + hwcap-bit-nr = <27>; + isa = <0>; + usable-privilege = <7>; + hv-support = <1>; + os-support = <0>; + }; + + prefixed-instructions { + hfscr-bit-nr = <13>; + fscr-bit-nr = <13>; + isa = <3010>; + usable-privilege = <7>; + os-support = <1>; + hv-support = <1>; + }; + + tar { + hfscr-bit-nr = <8>; + fscr-bit-nr = <8>; + isa = <2070>; + usable-privilege = <7>; + os-support = <1>; + hv-support = <1>; + hwcap-bit-nr = <58>; + }; + + control-register { + isa = <0>; + usable-privilege = <7>; + }; + + system-call-vectored { + isa = <3000>; + usable-privilege = <7>; + os-support = <1>; + fscr-bit-nr = <12>; + hwcap-bit-nr = <52>; + }; + }; + + PowerPC,Microwatt@0 { + i-cache-sets = <2>; + ibm,dec-bits = <64>; + reservation-granule-size = <64>; + clock-frequency = <100000000>; + timebase-frequency = <100000000>; + i-tlb-sets = <1>; + ibm,ppc-interrupt-server#s = <0>; + i-cache-block-size = <64>; + d-cache-block-size = <64>; + d-cache-sets = <2>; + i-tlb-size = <64>; + cpu-version = <0x990000>; + status = "okay"; + i-cache-size = <0x1000>; + ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>; + tlb-size = <0>; + tlb-sets = <0>; + device_type = "cpu"; + d-tlb-size = <128>; + d-tlb-sets = <2>; + reg = <0>; + general-purpose; + 64-bit; + d-cache-size = <0x1000>; + ibm,chip-id = <0>; + ibm,mmu-lpid-bits = <12>; + ibm,mmu-pid-bits = <20>; + }; + + PowerPC,Microwatt@1 { + i-cache-sets = <2>; + ibm,dec-bits = <64>; + reservation-granule-size = <64>; + clock-frequency = <100000000>; + timebase-frequency = <100000000>; + i-tlb-sets = <1>; + ibm,ppc-interrupt-server#s = <1>; + i-cache-block-size = <64>; + d-cache-block-size = <64>; + d-cache-sets = <2>; + i-tlb-size = <64>; + cpu-version = <0x990000>; + status = "okay"; + i-cache-size = <0x1000>; + ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>; + tlb-size = <0>; + tlb-sets = <0>; + device_type = "cpu"; + d-tlb-size = <128>; + d-tlb-sets = <2>; + reg = <1>; + general-purpose; + 64-bit; + d-cache-size = <0x1000>; + ibm,chip-id = <0>; + ibm,mmu-lpid-bits = <12>; + ibm,mmu-pid-bits = <20>; + }; + }; + + soc@c0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ICS>; + + ranges = <0 0 0xc0000000 0x40000000>; + + interrupt-controller@4000 { + compatible = "openpower,xics-presentation", "ibm,ppc-xicp"; + ibm,interrupt-server-ranges = <0x0 0x2>; + reg = <0x4000 0x10 0x4010 0x10>; + }; + + ICS: interrupt-controller@5000 { + compatible = "openpower,xics-sources"; + interrupt-controller; + interrupt-ranges = <0x10 0x10>; + reg = <0x5000 0x100>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UART0: serial@2000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x2000 0x8>; + clock-frequency = <100000000>; + current-speed = <115200>; + reg-shift = <2>; + fifo-size = <16>; + interrupts = <0x10 0x1>; + }; + + gpio: gpio@7000 { + device_type = "gpio"; + compatible = "faraday,ftgpio010"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x7000 0x80>; + interrupts = <0x14 1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + enet0: ethernet@8020000 { + compatible = "litex,liteeth"; + reg = <0x8021000 0x100 + 0x8020800 0x100 + 0x8030000 0x2000>; + reg-names = "mac", "mido", "buffer"; + litex,rx-slots = <2>; + litex,tx-slots = <2>; + litex,slot-size = <0x800>; + interrupts = <0x11 0x1>; + }; + + mmc@8040000 { + compatible = "litex,mmc"; + reg = <0x8042800 0x800 + 0x8041000 0x800 + 0x8040800 0x800 + 0x8042000 0x800 + 0x8041800 0x800>; + reg-names = "phy", "core", "reader", "writer", "irq"; + bus-width = <4>; + interrupts = <0x13 1>; + clocks = <&sys_clk>; + }; + }; + + chosen { + bootargs = ""; + ibm,architecture-vec-5 = [19 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 40 00 40]; + stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts new file mode 100644 index 000000000..c23676093 --- /dev/null +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Motion-PRO board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt6 { // Motion-PRO status LED + compatible = "promess,motionpro-led"; + label = "motionpro-statusled"; + blink-delay = <100>; // 100 msec +}; +&gpt7 { // Motion-PRO ready LED + compatible = "promess,motionpro-led"; + label = "motionpro-readyled"; +}; + +/ { + model = "promess,motionpro"; + compatible = "promess,motionpro"; + + soc5200@f0000000 { + can@900 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + // PSC2 in spi master mode + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + cell-index = <1>; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@2 { + reg = <2>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + ranges = <0 0 0xff000000 0x01000000 + 1 0 0x50000000 0x00010000 + 2 0 0x50010000 0x00010000 + 3 0 0x50020000 0x00010000>; + + // 8-bit DualPort SRAM on LocalPlus Bus CS1 + kollmorgen@1,0 { + compatible = "promess,motionpro-kollmorgen"; + reg = <1 0 0x10000>; + interrupts = <1 1 0>; + }; + + // 8-bit board CPLD on LocalPlus Bus CS2 + cpld@2,0 { + compatible = "promess,motionpro-cpld"; + reg = <2 0 0x10000>; + }; + + // 8-bit custom Anybus Module on LocalPlus Bus CS3 + anybus@3,0 { + compatible = "promess,motionpro-anybus"; + reg = <3 0 0x10000>; + }; + pro_module_general@3,0 { + compatible = "promess,pro_module_general"; + reg = <3 0 3>; + }; + pro_module_dio@3,800 { + compatible = "promess,pro_module_dio"; + reg = <3 0x800 2>; + }; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi new file mode 100644 index 000000000..a278fb7b9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * base MPC5121 Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + */ + +#include + +/dts-v1/; + +/ { + model = "mpc5121"; + compatible = "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + pci = &pci; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; /* 32 bytes */ + i-cache-line-size = <0x20>; /* 32 bytes */ + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */ + bus-frequency = <198000000>; /* 198 MHz csb bus */ + clock-frequency = <396000000>; /* 396 MHz ppc core */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + mbx@20000000 { + compatible = "fsl,mpc5121-mbx"; + reg = <0x20000000 0x4000>; + interrupts = <66 0x8>; + clocks = <&clks MPC512x_CLK_MBX_BUS>, + <&clks MPC512x_CLK_MBX_3D>, + <&clks MPC512x_CLK_MBX>; + clock-names = "mbx-bus", "mbx-3d", "mbx"; + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */ + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */ + interrupts = <6 8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks MPC512x_CLK_NFC>; + clock-names = "ipg"; + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; /* 66 MHz ips bus */ + + + /* + * IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + /* Watchdog timer */ + watchdog@900 { + compatible = "fsl,mpc5121-wdt"; + reg = <0x900 0x100>; + }; + + /* Real time clock */ + rtc@a00 { + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + /* Reset module */ + reset@e00 { + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + /* Clock control */ + clks: clock@f00 { + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; + }; + + /* Power Management Controller */ + pmc@1000 { + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x8>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1300 0x80>; + interrupts = <12 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1380 0x80>; + interrupts = <13 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + reg = <0x1500 0x100>; + interrupts = <8 0x8>; + dmas = <&dma0 30>; + dma-names = "rx-tx"; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <10 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + clocks = <&clks MPC512x_CLK_AXE>; + clock-names = "ipg"; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2300 0x80>; + interrupts = <90 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN2_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2380 0x80>; + interrupts = <91 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN3_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + clocks = <&clks MPC512x_CLK_VIU>; + clock-names = "ipg"; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + eth0: ethernet@2800 { + device_type = "network"; + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + /* USB1 using external ULPI PHY */ + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + clocks = <&clks MPC512x_CLK_USB2>; + clock-names = "ipg"; + }; + + /* IO control */ + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + /* LocalPlus controller */ + lpc@10000 { + compatible = "fsl,mpc5121-lpc"; + reg = <0x10000 0x100>; + }; + + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; + }; + + pata@10200 { + compatible = "fsl,mpc5121-pata"; + reg = <0x10200 0x100>; + interrupts = <5 0x8>; + clocks = <&clks MPC512x_CLK_PATA>; + clock-names = "ipg"; + }; + + /* 512x PSCs are not 52xx PSC compatible */ + + /* PSC0 */ + psc@11000 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC0>, + <&clks MPC512x_CLK_PSC0_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC1 */ + psc@11100 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC2 */ + psc@11200 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC2>, + <&clks MPC512x_CLK_PSC2_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC3 */ + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC3>, + <&clks MPC512x_CLK_PSC3_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC4 */ + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC4>, + <&clks MPC512x_CLK_PSC4_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC5 */ + psc@11500 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11500 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC5>, + <&clks MPC512x_CLK_PSC5_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC6 */ + psc@11600 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC6>, + <&clks MPC512x_CLK_PSC6_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC7 */ + psc@11700 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11700 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC7>, + <&clks MPC512x_CLK_PSC7_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC8 */ + psc@11800 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC8>, + <&clks MPC512x_CLK_PSC8_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC9 */ + psc@11900 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC10 */ + psc@11a00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11a00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC10>, + <&clks MPC512x_CLK_PSC10_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC11 */ + psc@11b00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11b00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC11>, + <&clks MPC512x_CLK_PSC11_MCLK>; + clock-names = "ipg", "mclk"; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; + }; + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + }; + + pci: pci@80008500 { + compatible = "fsl,mpc5121-pci"; + device_type = "pci"; + interrupts = <1 0x8>; + clock-frequency = <0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clks MPC512x_CLK_PCI>; + clock-names = "ipg"; + + reg = <0x80008500 0x100 /* internal registers */ + 0x80008300 0x8>; /* config space access registers */ + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts new file mode 100644 index 000000000..b407a50ee --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC5121E ADS Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + */ + +#include "mpc5121.dtsi" + +/ { + model = "mpc5121ads"; + compatible = "fsl,mpc5121ads", "fsl,mpc5121"; + + nfc@40000000 { + /* + * ADS has two Hynix 512MB Nand flash chips in a single + * stacked package. + */ + chips = <2>; + + nand@0 { + label = "nand"; + reg = <0x00000000 0x40000000>; /* 512MB + 512MB */ + }; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x2 0x0 0x82000000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + protected@0 { + label = "protected"; + reg = <0x00000000 0x00040000>; // first sector is protected + read-only; + }; + filesystem@40000 { + label = "filesystem"; + reg = <0x00040000 0x03c00000>; // 60M for filesystem + }; + kernel@3c40000 { + label = "kernel"; + reg = <0x03c40000 0x00280000>; // 2.5M for kernel + }; + device-tree@3ec0000 { + label = "device-tree"; + reg = <0x03ec0000 0x00040000>; // one sector for device tree + }; + u-boot@3f00000 { + label = "u-boot"; + reg = <0x03f00000 0x00100000>; // 1M for u-boot + read-only; + }; + }; + + board-control@2,0 { + compatible = "fsl,mpc5121ads-cpld"; + reg = <0x2 0x0 0x8000>; + }; + + cpld_pic: pic@2,a { + compatible = "fsl,mpc5121ads-cpld-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2 0xa 0x5>; + /* irq routing: + * all irqs but touch screen are routed to irq0 (ipic 48) + * touch screen is statically routed to irq1 (ipic 17) + * so don't use it here + */ + interrupts = <48 0x8>; + }; + }; + + soc@80000000 { + + i2c@1700 { + fsl,preserve-clocking; + + hwmon@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; + }; + + eth0: ethernet@2800 { + phy-handle = <&phy0>; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + /* mpc5121ads only uses USB0 */ + usb@3000 { + status = "disabled"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + dr_mode = "host"; + fsl,invert-drvvbus; + fsl,invert-pwr-fault; + }; + + /* PSC3 serial port A aka ttyPSC0 */ + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + /* PSC4 serial port B aka ttyPSC1 */ + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + /* PSC5 in ac97 mode */ + ac97: psc@11500 { + compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; + fsl,mode = "ac97-slave"; + fsl,rx-fifo-size = <384>; + fsl,tx-fifo-size = <384>; + }; + }; + + pci: pci@80008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x15 - Slot 1 PCI */ + 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 + 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 + 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 + 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 + + /* IDSEL 0x16 - Slot 2 MiniPCI */ + 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 + 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 + + /* IDSEL 0x17 - Slot 3 MiniPCI */ + 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 + 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts new file mode 100644 index 000000000..ee090709a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * STx/Freescale ADS5125 MPC5125 silicon + * + * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved. + * + * Reworked by Matteo Facchinetti (engineering@sirius-es.it) + * Copyright (C) 2013 Sirius Electronic Systems + */ + +#include + +/dts-v1/; + +/ { + model = "mpc5125twr"; // In BSP "mpc5125ads" + compatible = "fsl,mpc5125ads", "fsl,mpc5125"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5125@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x08000>; // 32K at 0x30000000 + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5125-reset"; + reg = <0xe00 0x100>; + }; + + clks: clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; + }; + + pmc@1000 { // Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + }; + + gpio1: gpio@1180 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1180 0x080>; + interrupts = <86 0x8>; + }; + + can@1300 { // CAN rev.2 + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + interrupts = <8 0x8>; + reg = <0x1500 0x100>; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <0xa 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + diu@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5125-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy0 >; + phy-connection-type = "rmii"; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5125-ioctl"; + reg = <0xA000 0x1000>; + }; + + // disable USB1 port + // TODO: + // correct pinmux config and fix USB3320 ulpi dependency + // before re-enabling it + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; + status = "disabled"; + }; + + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; + }; + + // 5125 PSCs are not 52xx or 5121 PSC compatible + // PSC1 uart0 aka ttyPSC0 + serial@11100 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; + }; + + // PSC9 uart1 aka ttyPSC1 + serial@11900 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; + }; + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi new file mode 100644 index 000000000..ffa82c7e1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * base MPC5200b Device Tree Source + * + * Copyright (C) 2010 SecretLab + * Grant Likely + * John Bonesio + */ + +/dts-v1/; + +/ { + model = "fsl,mpc5200b"; + compatible = "fsl,mpc5200b"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + powerpc: PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory: memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc: soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x600 0x10>; + interrupts = <1 9 0>; + // add 'fsl,has-wdt' to enable watchdog + }; + + gpt1: timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + gpt2: timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + gpt3: timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + gpt4: timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + gpt5: timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + gpt6: timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + gpt7: timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb: usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + psc1: psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc2: psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc3: psc@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc4: psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; + }; + + psc5: psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + + psc6: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + eth0: ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + sclpc@3c00 { + compatible = "fsl,mpc5200-lpbfifo"; + reg = <0x3c00 0x60>; + interrupts = <2 23 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci: pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + // interrupt-map-mask = need to add + // interrupt-map = need to add + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus: localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x2000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts new file mode 100644 index 000000000..5af945e17 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * mpc8308_p1m Device Tree Source + * + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + */ + +/dts-v1/; + +/ { + compatible = "denx,mpc8308_p1m"; + model = "denx,mpc8308_p1m"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x1 0x0 0xfbff0000 0x00008000 + 0x2 0x0 0xfbff8000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x20000>; + }; + env1@80000 { + reg = <0x80000 0x20000>; + }; + kernel@a0000 { + reg = <0xa0000 0x200000>; + }; + dtb@2a0000 { + reg = <0x2a0000 0x20000>; + }; + ramdisk@2c0000 { + reg = <0x2c0000 0x640000>; + }; + user@700000 { + reg = <0x700000 0x3900000>; + }; + }; + + can@1,0 { + compatible = "nxp,sja1000"; + reg = <0x1 0x0 0x80>; + interrupts = <18 0x8>; + interrups-parent = <&ipic>; + }; + + cpld@2,0 { + compatible = "denx,mpc8308_p1m-cpld"; + reg = <0x2 0x0 0x8>; + interrupts = <48 0x8>; + interrups-parent = <&ipic>; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + fram@50 { + compatible = "ramtron,24c64", "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + pwm@28 { + compatible = "maxim,ds1050"; + reg = <0x28>; + }; + sensor@48 { + compatible = "maxim,max6625"; + reg = <0x48>; + }; + sensor@49 { + compatible = "maxim,max6625"; + reg = <0x49>; + }; + sensor@4b { + compatible = "maxim,max6625"; + reg = <0x4b>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy1 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + timer@500 { + compatible = "fsl,mpc8308-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts new file mode 100644 index 000000000..7b6fd58ff --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8308RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8308rdb"; + model = "fsl,mpc8308rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x10000>; + }; + env1@70000 { + reg = <0x70000 0x10000>; + }; + kernel@80000 { + reg = <0x80000 0x200000>; + }; + dtb@280000 { + reg = <0x280000 0x10000>; + }; + ramdisk@290000 { + reg = <0x290000 0x570000>; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + jffs2@0 { + reg = <0x0 0x2000000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy2 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000..c9fe4dabc --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + */ + +/dts-v1/; +#include + +/ { + model = "MPC8313ERDB"; + compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe2800000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x03000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + phy_type = "utmi_wide"; + sleep = <&pmc 0x00300000>; + }; + + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, + <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + sleep = <&pmc 0x20000000>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 IRQ_TYPE_LEVEL_LOW>, + <36 IRQ_TYPE_LEVEL_LOW>, + <35 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy4: ethernet-phy@4 { + interrupt-parent = <&ipic>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <34 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <32 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + phy-handle = < &phy4 >; + sleep = <&pmc 0x10000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + + /* Remove this (or change to "okay") if you have + * a REVA3 or later board, if you apply one of the + * workarounds listed in section 8.5 of the board + * manual, or if you are adapting this device tree + * to a different board. + */ + status = "fail"; + }; + + gtm1: timer@500 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>, + <78 IRQ_TYPE_LEVEL_LOW>, + <84 IRQ_TYPE_LEVEL_LOW>, + <72 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + timer@600 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 IRQ_TYPE_LEVEL_LOW>, + <79 IRQ_TYPE_LEVEL_LOW>, + <85 IRQ_TYPE_LEVEL_LOW>, + <73 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00010000>; + ranges; + + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 IRQ_TYPE_LEVEL_LOW>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; + reg = <0xe00082a8 4>; + ranges = <0 0xe0008100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + + dma-channel@0 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + cell-index = <0>; + }; + + dma-channel@80 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x80 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + cell-index = <1>; + }; + + dma-channel@100 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x100 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + cell-index = <2>; + }; + + dma-channel@180 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + cell-index = <3>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts new file mode 100644 index 000000000..4757f0d24 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8315E RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + */ + +/dts-v1/; +#include + +/ { + compatible = "fsl,mpc8315erdb"; + model = "MPC8315E-RDB"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8315@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8315-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8315erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + #address-cells = <1>; + #size-cells = <0>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + }; + dma-channel@80 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + }; + dma-channel@100 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + }; + dma-channel@180 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + phy_type = "utmi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <34 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = < &phy0 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 IRQ_TYPE_LEVEL_LOW>, + <36 IRQ_TYPE_LEVEL_LOW>, + <37 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = < &phy1 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + sata@18000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + }; + + gtm1: timer@500 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>, + <78 IRQ_TYPE_LEVEL_LOW>, + <84 IRQ_TYPE_LEVEL_LOW>, + <72 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + timer@600 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 IRQ_TYPE_LEVEL_LOW>, + <79 IRQ_TYPE_LEVEL_LOW>, + <85 IRQ_TYPE_LEVEL_LOW>, + <73 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = + */ + ipic: interrupt-controller@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0 0x100>; + interrupts = <0x43 IRQ_TYPE_LEVEL_LOW + 0x4 IRQ_TYPE_LEVEL_LOW + 0x51 IRQ_TYPE_LEVEL_LOW + 0x52 IRQ_TYPE_LEVEL_LOW + 0x56 IRQ_TYPE_LEVEL_LOW + 0x57 IRQ_TYPE_LEVEL_LOW + 0x58 IRQ_TYPE_LEVEL_LOW + 0x59 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = < &ipic >; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", + "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + }; + + gpio: gpio-controller@c00 { + compatible = "fsl,mpc8314-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x2 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x3 &ipic 18 IRQ_TYPE_LEVEL_LOW + 0x7000 0x0 0x0 0x4 &ipic 18 IRQ_TYPE_LEVEL_LOW + + /* IDSEL 0x0F -mini PCI */ + 0x7800 0x0 0x0 0x1 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x3 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x7800 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW + + /* IDSEL 0x10 - PCI slot */ + 0x8000 0x0 0x0 0x1 &ipic 48 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x3 &ipic 48 IRQ_TYPE_LEVEL_LOW + 0x8000 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + interrupts = <66 IRQ_TYPE_LEVEL_LOW>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 2 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 3 &ipic 1 IRQ_TYPE_LEVEL_LOW + 0 0 0 4 &ipic 1 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 2 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 3 &ipic 2 IRQ_TYPE_LEVEL_LOW + 0 0 0 4 &ipic 2 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc0000000 + 0x02000000 0 0xc0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + led-hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "disk-activity"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts new file mode 100644 index 000000000..06f134490 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC832x RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + model = "MPC8323ERDB"; + compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet1; + ethernet1 = &enet0; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <16384>; // L1, 16K + i-cache-size = <16384>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; + sleep = <&pmc 0x03000000>; + }; + + ipic:pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1400 0x100>; + ranges = <3 0x1448 0x18>; + compatible = "fsl,mpc8323-qe-pario"; + device_type = "par_io"; + num-ports = <7>; + + qe_pio_d: gpio-controller@1448 { + #gpio-cells = <2>; + compatible = "fsl,mpc8323-qe-pario-bank"; + reg = <3 0x18>; + gpio-controller; + }; + + ucc2pio:ucc_pin@2 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 3 21 2 0 1 0 /* RX_CLK (CLK16) */ + 3 23 2 0 1 0 /* TX_CLK (CLK3) */ + 0 18 1 0 1 0 /* TxD0 */ + 0 19 1 0 1 0 /* TxD1 */ + 0 20 1 0 1 0 /* TxD2 */ + 0 21 1 0 1 0 /* TxD3 */ + 0 22 2 0 1 0 /* RxD0 */ + 0 23 2 0 1 0 /* RxD1 */ + 0 24 2 0 1 0 /* RxD2 */ + 0 25 2 0 1 0 /* RxD3 */ + 0 26 2 0 1 0 /* RX_ER */ + 0 27 1 0 1 0 /* TX_ER */ + 0 28 2 0 1 0 /* RX_DV */ + 0 29 2 0 1 0 /* COL */ + 0 30 1 0 1 0 /* TX_EN */ + 0 31 2 0 1 0>; /* CRS */ + }; + ucc3pio:ucc_pin@3 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 13 2 0 1 0 /* RX_CLK (CLK9) */ + 3 24 2 0 1 0 /* TX_CLK (CLK10) */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 10 2 0 1 0 /* RX_DV */ + 1 11 2 0 1 0 /* COL */ + 1 12 1 0 1 0 /* TX_EN */ + 1 13 2 0 1 0>; /* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; + brg-frequency = <0>; + bus-frequency = <198000000>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x00004000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x4000>; + }; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + cs-gpios = <&qe_pio_d 13 0>; + mode = "cpu-qe"; + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + enet0: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk16"; + tx-clock-name = "clk3"; + phy-handle = <&phy00>; + pio-handle = <&ucc2pio>; + }; + + enet1: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; + phy-handle = <&phy04>; + pio-handle = <&ucc3pio>; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + + phy00:ethernet-phy@0 { + reg = <0x0>; + }; + phy04:ethernet-phy@4 { + reg = <0x4>; + }; + }; + + qeic:interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 0x8 33 0x8>; //high:32 low:33 + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x10 AD16 (USB) */ + 0x8000 0x0 0x0 0x1 &ipic 17 0x8 + + /* IDSEL 0x11 AD17 (Mini1)*/ + 0x8800 0x0 0x0 0x1 &ipic 18 0x8 + 0x8800 0x0 0x0 0x2 &ipic 19 0x8 + 0x8800 0x0 0x0 0x3 &ipic 20 0x8 + 0x8800 0x0 0x0 0x4 &ipic 48 0x8 + + /* IDSEL 0x12 AD18 (PCI/Mini2) */ + 0x9000 0x0 0x0 0x1 &ipic 19 0x8 + 0x9000 0x0 0x0 0x2 &ipic 20 0x8 + 0x9000 0x0 0x0 0x3 &ipic 48 0x8 + 0x9000 0x0 0x0 0x4 &ipic 17 0x8>; + + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + sleep = <&pmc 0x00010000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts new file mode 100644 index 000000000..12d33cb55 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8349E-mITX Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + model = "MPC8349EMITX"; + compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; // from bootloader + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + eeprom: at24@50 { + compatible = "st,24c256", "atmel,24c256"; + reg = <0x50>; + }; + + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; + + pcf1: iexp@38 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + pcf2: iexp@39 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x39>; + gpio-controller; + }; + + spd: at24@51 { + compatible = "atmel,spd"; + reg = <0x51>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1c>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + linux,network-index = <1>; + tbi-handle = <&tbi1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + label = "Green"; + gpios = <&pcf1 0 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&pcf1 1 1>; + /* linux,default-trigger = "heartbeat"; */ + default-state = "on"; + }; + }; + + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x10 - SATA */ + 0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */ + >; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pci@e0008600 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E - MiniPCI Slot */ + 0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */ + + /* IDSEL 0x0F - PCI Slot */ + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349e-localbus", + "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */ + 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */ + 0x2 0x0 0xf9000000 0x200000 /* exp slot */ + 0x3 0x0 0xf0000000 0x210>; /* CF slot */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@0,800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x800000 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + pata@3,0 { + compatible = "fsl,mpc8349emitx-pata", "ata-generic"; + reg = <0x3 0x0 0x10 0x3 0x20c 0x4>; + reg-shift = <1>; + pio-mode = <6>; + interrupts = <23 0x8>; + interrupt-parent = <&ipic>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 000000000..2998a233a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; // from bootloader + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1c>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008600 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x1 0x1>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts new file mode 100644 index 000000000..d3d36fbf4 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -0,0 +1,464 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8360E RDK Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360rdk"; + model = "fsl,mpc8360rdk"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* filled by u-boot */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + /* filled by u-boot */ + reg = <0 0>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc", + "simple-bus"; + ranges = <0 0xe0000000 0x200000>; + reg = <0xe0000000 0x200>; + /* filled by u-boot */ + bus-frequency = <0>; + + watchdog@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <16 8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + interrupts = <9 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + + serial1: serial@4600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + interrupts = <10 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; + }; + + ipic: interrupt-controller@700 { + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "fsl,pq2pro-pic", "fsl,ipic"; + interrupt-controller; + reg = <0x700 0x100>; + }; + + qe_pio_b: gpio-controller@1418 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1418 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; + + qe@100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe", "simple-bus"; + ranges = <0 0x100000 0x100000>; + reg = <0x100000 0x480>; + /* filled by u-boot */ + clock-frequency = <0>; + bus-frequency = <0>; + brg-frequency = <0>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 0x10000 0xc000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 0xc000>; + }; + }; + + timer@440 { + compatible = "fsl,mpc8360-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + clock-frequency = <166666666>; + }; + + usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 1 /* POWER */>; + }; + + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + mode = "cpu-qe"; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu-qe"; + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-rxid"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy4>; + phy-connection-type = "rgmii-rxid"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet2: ucc@2600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + rx-clock-name = "clk20"; + tx-clock-name = "clk19"; + phy-handle = <&phy1>; + phy-connection-type = "mii"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet3: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + rx-clock-name = "clk8"; + tx-clock-name = "clk7"; + phy-handle = <&phy3>; + phy-connection-type = "mii"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,ucc-mdio"; + reg = <0x2120 0x18>; + + phy1: ethernet-phy@1 { + compatible = "national,DP83848VV"; + reg = <1>; + }; + + phy2: ethernet-phy@2 { + compatible = "broadcom,BCM5481UA2KMLG"; + reg = <2>; + }; + + phy3: ethernet-phy@3 { + compatible = "national,DP83848VV"; + reg = <3>; + }; + + phy4: ethernet-phy@4 { + compatible = "broadcom,BCM5481UA2KMLG"; + reg = <4>; + }; + }; + + serial2: ucc@2400 { + device_type = "serial"; + compatible = "ucc_uart"; + reg = <0x2400 0x200>; + cell-index = <5>; + port-number = <0>; + rx-clock-name = "brg7"; + tx-clock-name = "brg8"; + interrupts = <40>; + interrupt-parent = <&qeic>; + soft-uart; + }; + + serial3: ucc@3400 { + device_type = "serial"; + compatible = "ucc_uart"; + reg = <0x3400 0x200>; + cell-index = <6>; + port-number = <1>; + rx-clock-name = "brg13"; + tx-clock-name = "brg14"; + interrupts = <41>; + interrupt-parent = <&qeic>; + soft-uart; + }; + + qeic: interrupt-controller@80 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "fsl,qe-ic"; + interrupt-controller; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 8 33 8>; + interrupt-parent = <&ipic>; + }; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xff800000 0x0800000 + 1 0 0x60000000 0x0001000 + 2 0 0x70000000 0x4000000>; + + flash@0,0 { + compatible = "intel,PC28F640P30T85", "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + upm@1,0 { + compatible = "fsl,upm-nand"; + reg = <1 0 1>; + fsl,upm-addr-offset = <16>; + fsl,upm-cmd-offset = <8>; + gpios = <&qe_pio_e 18 0>; + + flash { + compatible = "st,nand512-a"; + }; + }; + + display@2,0 { + device_type = "display"; + compatible = "fujitsu,MB86277", "fujitsu,mint"; + reg = <2 0 0x4000000>; + fujitsu,sh3; + little-endian; + /* filled by u-boot */ + address = <0>; + depth = <0>; + width = <0>; + height = <0>; + linebytes = <0>; + /* linux,opened; - added by uboot */ + }; + }; + + pci0: pci@e0008500 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; + interrupts = <66 8>; + interrupt-parent = <&ipic>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = ; + sleep = <&pmc 0x00010000>; + /* filled by u-boot */ + bus-range = <0 0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts new file mode 100644 index 000000000..f4244a7a3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8377E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377rdb"; + model = "fsl,mpc8377rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8377erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "disk-activity"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts new file mode 100644 index 000000000..77ee5f8db --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8377E WLAN Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2009 MontaVista Software, Inc. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377wlan"; + model = "fsl,mpc8377wlan"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0 0x80000>; + label = "u-boot"; + read-only; + }; + + partition@a0000 { + reg = <0xa0000 0x300000>; + label = "kernel"; + }; + + partition@3a0000 { + reg = <0x3a0000 0x3c60000>; + label = "rootfs"; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + at24@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + clock-frequency = <133333333>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts new file mode 100644 index 000000000..9ae4ed5ff --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8378E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8378rdb"; + model = "fsl,mpc8378rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8378erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "disk-activity"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts new file mode 100644 index 000000000..214611dc6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -0,0 +1,449 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8379E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8379rdb"; + model = "fsl,mpc8379rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + watchdog@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8379erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1a000 0x1000>; + interrupts = <46 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x0000000c>; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1b000 0x1000>; + interrupts = <47 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000003>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "disk-activity"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts new file mode 100644 index 000000000..ff60d678c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC866 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +/ { + model = "MPC866ADS"; + compatible = "fsl,mpc866ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,866@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x2000>; // L1, 8K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x800000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 + >; + + board-control@1,0 { + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; + compatible = "fsl,mpc866ads-bcsr"; + }; + }; + + soc@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x100000>; + reg = <0xff000000 0x200>; + bus-frequency = <0>; + + mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <0>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc866-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc866-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc866-cpm-pic", + "fsl,cpm1-pic"; + }; + + + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + serial@a90 { + device_type = "serial"; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa90 0x10 0x3f80 0x40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0xd0>; + }; + + ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc866-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <1>; + }; + + i2c@860 { + compatible = "fsl,mpc866-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + chosen { + stdout-path = "/soc/cpm/serial@a80"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts new file mode 100644 index 000000000..be58e7f29 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC885 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +/ { + model = "MPC885ADS"; + compatible = "fsl,mpc885ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 + >; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; + compatible = "fsl,mpc885ads-bcsr"; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x28000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + reg = <0x1>; + }; + + PHY2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <0x80 0x80>; + interrupt-parent = <&PIC>; + interrupts = <13 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <0x9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <0>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + serial@a90 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa90 0x10 0x3f80 0x40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0xd0>; + }; + + ethernet@a40 { + device_type = "network"; + compatible = "fsl,mpc885-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa40 0x18 0x3e00 0x100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <28>; + interrupt-parent = <&CPM_PIC>; + phy-handle = <&PHY2>; + fsl,cpm-command = <0x80>; + linux,network-index = <2>; + }; + + i2c@860 { + compatible = "fsl,mpc885-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + crypto@20000 { + compatible = "fsl,sec1.2", "fsl,sec1.0"; + reg = <0x20000 0x8000>; + interrupts = <1 1>; + interrupt-parent = <&PIC>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x05000154>; + }; + }; + + chosen { + stdout-path = "/soc/cpm/serial@a80"; + }; +}; diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts new file mode 100644 index 000000000..e88a7bd40 --- /dev/null +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Manroland mucmc52 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher + * Copyright 2006-2007 Secret Lab Technologies Ltd. + */ + +/include/ "mpc5200b.dtsi" + +/* Timer pins that need to be in GPIO mode */ +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/* Disabled timers */ +&gpt4 { status = "disabled"; }; +&gpt5 { status = "disabled"; }; +&gpt6 { status = "disabled"; }; +&gpt7 { status = "disabled"; }; + +/ { + model = "manroland,mucmc52"; + compatible = "manroland,mucmc52"; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + spi@f00 { + status = "disabled"; + }; + + usb@1000 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 */ + 0x8000 0 0 1 &mpc5200_pic 0 3 3 + 0x8000 0 0 2 &mpc5200_pic 0 3 3 + 0x8000 0 0 3 &mpc5200_pic 0 2 3 + 0x8000 0 0 4 &mpc5200_pic 0 1 3 + >; + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00020000>; + }; + partition@760000 { + label = "red. Env"; + reg = <0x00760000 0x00020000>; + }; + partition@780000 { + label = "reserve"; + reg = <0x00780000 0x00080000>; + }; + }; + + simple100: gpio-controller-100@3,600100 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600100 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple104: gpio-controller-104@3,600104 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600104 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple200: gpio-controller-200@3,600200 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600200 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple201: gpio-controller-201@3,600201 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600201 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple202: gpio-controller-202@3,600202 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600202 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple203: gpio-controller-203@3,600203 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600203 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple204: gpio-controller-204@3,600204 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600204 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple206: gpio-controller-206@3,600206 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600206 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple207: gpio-controller-207@3,600207 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600207 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple20f: gpio-controller-20f@3,60020f { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x0060020f 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts new file mode 100644 index 000000000..a7eb6d259 --- /dev/null +++ b/arch/powerpc/boot/dts/mvme5100.dts @@ -0,0 +1,185 @@ +/* + * Device Tree Source for Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "MVME5100"; + compatible = "MVME5100"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7410 { + device_type = "cpu"; + reg = <0x0>; + /* Following required by dtc but not used */ + d-cache-line-size = <32>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + timebase-frequency = <25000000>; + clock-frequency = <500000000>; + bus-frequency = <100000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + hawk@fef80000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hawk-bridge", "simple-bus"; + ranges = <0x0 0xfef80000 0x10000>; + reg = <0xfef80000 0x10000>; + + serial0: serial@8000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8000 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + serial1: serial@8200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8200 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@f3f80000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0xf3f80000 0x40000>; + }; + }; + + pci0: pci@feff0000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "hawk-pci"; + reg = <0xfec00000 0x400000>; + 8259-interrupt-acknowledge = <0xfeff0030>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* + * This definition (IDSEL 11) duplicates the + * interrupts definition in the i8259 + * interrupt controller below. + * + * Do not change the interrupt sense/polarity from + * 0x2 to anything else, doing so will cause endless + * "spurious" i8259 interrupts to be fielded. + */ + // IDSEL 11 - iPMC712 PCI/ISA Bridge + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 + + /* IDSEL 12 - Not Used */ + + /* IDSEL 13 - Universe VME Bridge */ + 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 + + /* IDSEL 14 - ENET 1 */ + 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 + + /* IDSEL 15 - Not Used */ + + /* IDSEL 16 - PMC Slot 1 */ + 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 + + /* IDSEL 17 - PMC Slot 2 */ + 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 + + /* IDSEL 18 - Not Used */ + + /* IDSEL 19 - ENET 2 */ + 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 + + /* IDSEL 20 - PMCSPAN (PCI-X) */ + 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 + + >; + + isa { + #address-cells = <2>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "isa"; + compatible = "isa"; + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + #interrupt-cells = <2>; + #address-cells = <0>; + interrupts = <0 2>; + device_type = "interrupt-controller"; + compatible = "chrp,iic"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + interrupt-parent = <&mpic>; + }; + + }; + + }; + + chosen { + stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts new file mode 100644 index 000000000..e0a8d3034 --- /dev/null +++ b/arch/powerpc/boot/dts/o2d.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2D Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2d"; + compatible = "ifm,o2d"; + + memory@0 { + reg = <0x00000000 0x08000000>; // 128MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* o2d specific partitions */ + partition@2c0000 { + label = "o2d user defined"; + reg = <0x002c0000 0x01d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi new file mode 100644 index 000000000..7e52509fa --- /dev/null +++ b/arch/powerpc/boot/dts/o2d.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2D base Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { + gpio-controller; + fsl,has-wdt; + fsl,wdt-on-boot = <0>; +}; +&gpt1 { gpio-controller; }; + +/ { + model = "ifm,o2d"; + compatible = "ifm,o2d"; + + memory@0 { + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + + rtc@800 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + localbus { + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; + + // flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + no-unaligned-direct-access; + + /* common layout for all machines */ + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "env"; + reg = <0x00040000 0x00020000>; + read-only; + }; + }; + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; + ifm,csi-clk-handle = <&gpt7>; + gpios = <&gpio_simple 23 0 /* imag_capture */ + &gpio_simple 26 0 /* imag_reset */ + &gpio_simple 29 0>; /* imag_master_en */ + + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts new file mode 100644 index 000000000..55a25b700 --- /dev/null +++ b/arch/powerpc/boot/dts/o2d300.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2D300 Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2d300"; + compatible = "ifm,o2d"; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@40000 { + label = "env_1"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "env_2"; + reg = <0x00060000 0x00020000>; + read-only; + }; + partition@80000 { + label = "kernel"; + reg = <0x00080000 0x00260000>; + read-only; + }; + /* o2d300 specific partitions */ + partition@2e0000 { + label = "o2d300 user defined"; + reg = <0x002e0000 0x01d20000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts new file mode 100644 index 000000000..c2eedbd1f --- /dev/null +++ b/arch/powerpc/boot/dts/o2dnt2.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2DNT2 Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2dnt2"; + compatible = "ifm,o2d"; + + memory@0 { + reg = <0x00000000 0x08000000>; // 128MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + + /* o2dnt2 specific partitions */ + partition@2c0000 { + label = "o2dnt2 user defined"; + reg = <0x002c0000 0x01d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts new file mode 100644 index 000000000..3fb2e0ad7 --- /dev/null +++ b/arch/powerpc/boot/dts/o2i.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2I Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2i"; + compatible = "ifm,o2d"; + + localbus { + flash@0,0 { + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* o2i specific partitions */ + partition@2c0000 { + label = "o2i user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts new file mode 100644 index 000000000..c5e0ba6e8 --- /dev/null +++ b/arch/powerpc/boot/dts/o2mnt.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O2MNT Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2mnt"; + compatible = "ifm,o2d"; + + localbus { + flash@0,0 { + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* add o2mnt specific partitions */ + partition@2c0000 { + label = "o2mnt user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts new file mode 100644 index 000000000..e4c1bdd41 --- /dev/null +++ b/arch/powerpc/boot/dts/o3dnt.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * O3DNT Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o3dnt"; + compatible = "ifm,o2d"; + + memory@0 { + reg = <0x00000000 0x04000000>; // 64MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x01000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + + /* o3dnt specific partitions */ + partition@2c0000 { + label = "o3dnt user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts new file mode 100644 index 000000000..5cee474dc --- /dev/null +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source + * + * Copyright 2006 Pengutronix + * Sascha Hauer + * Copyright 2007 Pengutronix + * Juergen Beisert + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "phytec,pcm030"; + compatible = "phytec,pcm030"; + + soc5200@f0000000 { + audioplatform: psc@2000 { /* PSC1 in ac97 mode */ + compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; + cell-index = <0>; + }; + + /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; + + psc@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; + + /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "catalyst,24c32", "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + status = "disabled"; + }; + + sound { + compatible = "phytec,pcm030-audio-fabric"; + asoc-platform = <&audioplatform>; + }; +}; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts new file mode 100644 index 000000000..d00f13b62 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source + * + * Copyright (C) 2006-2009 Pengutronix + * Sascha Hauer, Juergen Beisert, Wolfram Sang + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "phytec,pcm032"; + compatible = "phytec,pcm032"; + + memory@0 { + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + psc@2000 { /* PSC1 is ac97 */ + compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + cell-index = <0>; + }; + + /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; + + psc@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; + + /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "catalyst,24c32", "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0xfc000000 0x02000000 + 2 0 0xfbe00000 0x00200000 + 3 0 0xf9e00000 0x02000000 + 4 0 0xf7e00000 0x02000000 + 5 0 0xe6000000 0x02000000 + 6 0 0xe8000000 0x02000000 + 7 0 0xea000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "ubootl"; + reg = <0x00000000 0x00040000>; + }; + partition@40000 { + label = "kernel"; + reg = <0x00040000 0x001c0000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "uboot"; + reg = <0x01f00000 0x00040000>; + }; + partition@1f40000 { + label = "env"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "oftree"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "space"; + reg = <0x01fc0000 0x00040000>; + }; + }; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + + /* + * example snippets for FPGA + * + * fpga@3,0 { + * compatible = "fpga_driver"; + * reg = <3 0 0x02000000>; + * bank-width = <4>; + * }; + * + * fpga@4,0 { + * compatible = "fpga_driver"; + * reg = <4 0 0x02000000>; + * bank-width = <4>; + * }; + */ + + /* + * example snippets for free chipselects + * + * device@5,0 { + * compatible = "custom_driver"; + * reg = <5 0 0x02000000>; + * }; + * + * device@6,0 { + * compatible = "custom_driver"; + * reg = <6 0 0x02000000>; + * }; + * + * device@7,0 { + * compatible = "custom_driver"; + * reg = <7 0 0x02000000>; + * }; + */ + }; +}; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 000000000..67c3b9db7 --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + */ + +#include "mpc5121.dtsi" + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + + i2c@1700 { + fsl,preserve-clocking; + + eeprom@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1720 { + status = "disabled"; + }; + + i2c@1740 { + fsl,preserve-clocking; + }; + + ethernet@2800 { + phy-handle = <&phy0>; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + /* USB1 using external ULPI PHY */ + usb@3000 { + dr_mode = "host"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + fsl,invert-pwr-fault; + }; + + psc@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11500 { + status = "disabled"; + }; + + psc@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11700 { + status = "disabled"; + }; + + psc@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + #address-cells = <1>; + #size-cells = <0>; + + /* ADS7845 touch screen controller */ + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + /* pen irq is GPIO25 */ + interrupts = <78 0x8>; + }; + }; + + psc@11a00 { + status = "disabled"; + }; + + psc@11b00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts new file mode 100644 index 000000000..6bdfba6cb --- /dev/null +++ b/arch/powerpc/boot/dts/ps3.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PS3 Game Console device tree. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +/dts-v1/; + +/ { + model = "SonyPS3"; + compatible = "sony,ps3"; + #size-cells = <2>; + #address-cells = <2>; + + chosen { + }; + + /* + * We'll get the size of the bootmem block from lv1 after startup, + * so we'll put a null entry here. + */ + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + /* + * The boot cpu is always zero for PS3. + * + * dtc expects a clock-frequency and timebase-frequency entries, so + * we'll put a null entries here. These will be initialized after + * startup with data from lv1. + * + * Seems the only way currently to indicate a processor has multiple + * threads is with an ibm,ppc-interrupt-server#s entry. We'll put one + * here so we can bring up both of ours. See smp_setup_cpu_maps(). + */ + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + ibm,ppc-interrupt-server#s = <0x0 0x1>; + clock-frequency = <0>; + timebase-frequency = <0>; + i-cache-size = <32768>; + d-cache-size = <32768>; + i-cache-line-size = <128>; + d-cache-line-size = <128>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts new file mode 100644 index 000000000..e59829cff --- /dev/null +++ b/arch/powerpc/boot/dts/rainier.dts @@ -0,0 +1,350 @@ +/* + * Device Tree Source for AMCC Rainier + * + * Based on Sequoia code + * Copyright (c) 2007 MontaVista Software, Inc. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,rainier"; + compatible = "amcc,rainier"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GRx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440grx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440grx", "ibm,dma-4xx"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440grx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440grx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <0x00180000 0x00200000>; + }; + partition@380000 { + label = "file system"; + reg = <0x00380000 0x03aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <0x03e20000 0x00140000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440grx", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601000 { + compatible = "ibm,rgmii-440grx", "ibm,rgmii"; + reg = <0xef601000 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600e00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600f00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; + primary; + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000 + 0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts new file mode 100644 index 000000000..3c849e23e --- /dev/null +++ b/arch/powerpc/boot/dts/redwood.dts @@ -0,0 +1,368 @@ +/* + * Device Tree Source for AMCC Redwood(460SX) + * + * Copyright 2008 AMCC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,redwood"; + compatible = "amcc,redwood"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x0000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + PCIE0: pcie@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pcie@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pcie@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; + }; + + }; + + + chosen { + stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts new file mode 100644 index 000000000..7d15f18e1 --- /dev/null +++ b/arch/powerpc/boot/dts/sam440ep.dts @@ -0,0 +1,293 @@ +/* + * Device Tree Source for ACube Sam440ep based off bamboo.dts code + * original copyrights below + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer + * + * Modified from bamboo.dts for sam440ep: + * Copyright 2008 Giuseppe Coviello + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "acube,sam440ep"; + compatible = "acube,sam440ep"; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 4 0x1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 2>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 2>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0 0x00000000 0x80000000 + 0x80000000 0 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 8>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 8>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 8>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 8>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + index = <0>; + reg = <0xef600700 0x14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + index = <5>; + reg = <0xef600800 0x14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0xc>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 4 0x1d 4>; + reg = <0xef600e00 0x70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 4 0x1f 4>; + reg = <0xef600f00 0x70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x80>; + interrupts = <8 4 9 4>; + interrupt-parent = <&UIC1>; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 0xeec00000 8 /* Config space access */ + 0 0xeed00000 4 /* IACK */ + 0 0xeed00000 4 /* Special cycle */ + 0 0xef400000 0x40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts new file mode 100644 index 000000000..60d211da9 --- /dev/null +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -0,0 +1,412 @@ +/* + * Device Tree Source for AMCC Sequoia + * + * Based on Bamboo code by Josh Boyer + * Copyright (c) 2006, 2007 IBM Corp. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,sequoia"; + compatible = "amcc,sequoia"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EPx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440epx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@e0100000 { + compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto"; + reg = <0 0xE0100000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x4>; + }; + + rng@e0120000 { + compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng"; + reg = <0 0xE0120000 0x150>; + }; + + DMA0: dma { + compatible = "ibm,dma-440epx", "ibm,dma-4xx"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; + }; + + USB1: usb@e0000400 { + compatible = "ibm,usb-ohci-440epx", "ohci-be"; + reg = <0x00000000 0xe0000400 0x00000060>; + interrupt-parent = <&UIC0>; + interrupts = <0x15 0x8>; + }; + + USB0: ehci@e0000300 { + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>; + big-endian; + }; + + POB0: opb { + compatible = "ibm,opb-440epx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440epx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <0x00180000 0x00200000>; + }; + partition@380000 { + label = "file system"; + reg = <0x00380000 0x03aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <0x03e20000 0x00140000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00084000>; + }; + partition@84000 { + label = "user"; + reg = <0x00084000 0x01f7c000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + hwmon@48 { + compatible = "adi,ad7414"; + reg = <0x48>; + }; + }; + + IIC1: i2c@ef600800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440epx", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601000 { + compatible = "ibm,rgmii-440epx", "ibm,rgmii"; + reg = <0xef601000 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600e00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600f00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; + primary; + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + * From the 440EPx user manual: + * PCI 1 Memory 1 8000 0000 1 BFFF FFFF 1GB + * I/O 1 E800 0000 1 E800 FFFF 64KB + * I/O 1 E880 0000 1 EBFF FFFF 56MB + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts new file mode 100644 index 000000000..00a56e8e3 --- /dev/null +++ b/arch/powerpc/boot/dts/socrates.dts @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for the Socrates board (MPC8544). + * + * Copyright (c) 2008 Emcraft Systems. + * Sergei Poselenov, + */ + +/dts-v1/; + +/ { + model = "abb,socrates"; + compatible = "abb,socrates"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc8544@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; // Filled in by U-Boot + compatible = "fsl,mpc8544-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + fsl,preserve-clocking; + + dtt@28 { + compatible = "winbond,w83782d"; + reg = <0x28>; + }; + rtc@32 { + compatible = "epson,rx8025"; + reg = <0x32>; + interrupts = <7 1>; + interrupt-parent = <&mpic>; + }; + dtt@4c { + compatible = "dallas,ds75"; + reg = <0x4c>; + }; + ts@4a { + compatible = "ti,tsc2003"; + reg = <0x4a>; + interrupt-parent = <&mpic>; + interrupts = <8 1>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + fsl,preserve-clocking; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + + localbus { + compatible = "fsl,mpc8544-localbus", + "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x40>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = <0 0 0xfc000000 0x04000000 + 2 0 0xc8000000 0x04000000 + 3 0 0xc0000000 0x00100000 + >; /* Overwritten by U-Boot */ + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x0 0x000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x0 0x1e0000>; + read-only; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x1e0000 0x20000>; + }; + partition@200000 { + label = "root"; + reg = <0x200000 0x200000>; + }; + partition@400000 { + label = "user"; + reg = <0x400000 0x3b80000>; + }; + partition@3f80000 { + label = "env"; + reg = <0x3f80000 0x40000>; + read-only; + }; + partition@3fc0000 { + label = "u-boot"; + reg = <0x3fc0000 0x40000>; + read-only; + }; + }; + + display@2,0 { + compatible = "fujitsu,lime"; + reg = <2 0x0 0x4000000>; + interrupt-parent = <&mpic>; + interrupts = <6 1>; + }; + + fpga_pic: fpga-pic@3,10 { + compatible = "abb,socrates-fpga-pic"; + reg = <3 0x10 0x10>; + interrupt-controller; + /* IRQs 2, 10, 11, active low, level-sensitive */ + interrupts = <2 1 10 1 11 1>; + interrupt-parent = <&mpic>; + #interrupt-cells = <3>; + }; + + spi@3,60 { + compatible = "abb,socrates-spi"; + reg = <3 0x60 0x10>; + interrupts = <8 4 0>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + + nand@3,70 { + compatible = "abb,socrates-nand"; + reg = <3 0x70 0x04>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + data@0 { + label = "data"; + reg = <0x0 0x40000000>; + }; + }; + + can@3,100 { + compatible = "philips,sja1000"; + reg = <3 0x100 0x80>; + interrupts = <2 8 1>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 1 &mpic 5 1 + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 1 &mpic 4 1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts new file mode 100644 index 000000000..99f6f544d --- /dev/null +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -0,0 +1,142 @@ +/* + * Device Tree Source for IOMEGA StorCenter + * + * Copyright 2007 Oyvind Repvik + * Copyright 2007 Jon Loeliger + * + * Based on the Kurobox DTS by G. Liakhovetski + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "StorCenter"; + compatible = "iomega,storcenter"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8241@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <200000000>; + timebase-frequency = <25000000>; + bus-frequency = <0>; /* from bootwrapper */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; /* 64MB @ 0x0 */ + }; + + soc@fc000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8241", "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + ranges = <0x0 0xfc000000 0x100000>; + reg = <0xfc000000 0x100000>; /* EUMB */ + bus-frequency = <0>; /* fixed by loader */ + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <115200>; + interrupts = <25 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <9600>; + interrupts = <26 2>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@40000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x40000 0x40000>; + }; + + }; + + pci0: pci@fe800000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfe800000 0x1000>; + ranges = <0x01000000 0x0 0x0 0xfe000000 0x0 0x00c00000 + 0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 0xff>; + clock-frequency = <97553800>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 13 - IDE */ + 0x6800 0 0 1 &mpic 0 1 + 0x6800 0 0 2 &mpic 0 1 + 0x6800 0 0 3 &mpic 0 1 + 0x6800 0 0 4 &mpic 0 1 + /* IDSEL 14 - USB */ + 0x7000 0 0 1 &mpic 0 1 + 0x7000 0 0 2 &mpic 0 1 + 0x7000 0 0 3 &mpic 0 1 + 0x7000 0 0 4 &mpic 0 1 + /* IDSEL 15 - ETH */ + 0x7800 0 0 1 &mpic 0 1 + 0x7800 0 0 2 &mpic 0 1 + 0x7800 0 0 3 &mpic 0 1 + 0x7800 0 0 4 &mpic 0 1 + >; + }; + + chosen { + stdout-path = &serial0; + }; +}; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts new file mode 100644 index 000000000..e73f7e75b --- /dev/null +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * STX GP3 - 8560 ADS Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 0xfdf00000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <2>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + }; + }; + + pci0: pci@fdf08000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &mpic 1 1 + 0x6000 0 0 2 &mpic 2 1 + 0x6000 0 0 3 &mpic 3 1 + 0x6000 0 0 4 &mpic 4 1 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &mpic 4 1 + 0x6800 0 0 2 &mpic 1 1 + 0x6800 0 0 3 &mpic 2 1 + 0x6800 0 0 4 &mpic 3 1 + + /* IDSEL 0x0e */ + 0x7000 0 0 1 &mpic 3 1 + 0x7000 0 0 2 &mpic 4 1 + 0x7000 0 0 3 &mpic 1 1 + 0x7000 0 0 4 &mpic 2 1 + + /* IDSEL 0x0f */ + 0x7800 0 0 1 &mpic 2 1 + 0x7800 0 0 2 &mpic 3 1 + 0x7800 0 0 3 &mpic 4 1 + 0x7800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfdf08000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts new file mode 100644 index 000000000..96add25c9 --- /dev/null +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8555-based STx GP3 Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * Copyright 2010 Silicon Turnkey Express LLC. + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x2>; + }; + phy1: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts new file mode 100644 index 000000000..803f1bff7 --- /dev/null +++ b/arch/powerpc/boot/dts/taishan.dts @@ -0,0 +1,427 @@ +/* + * Device Tree Source for IBM/AMCC Taishan + * + * Copyright 2007 IBM Corp. + * Hugh Blemings based off code by + * Josh Boyer , David Gibson + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,taishan"; + compatible = "amcc,taishan"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC2; + ethernet1 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GX"; + reg = <0x00000000>; + clock-frequency = <800000000>; // 800MHz + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <50>; + d-cache-line-size = <50>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + + UICB0: interrupt-controller-base { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x200 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */ + interrupt-parent = <&UICB0>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x3 0x4 0x2 0x4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <2>; /* was 1 */ + dcr-reg = <0x210 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x5 0x4 0x4 0x4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; + // FIXME: anything else? + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC2>; + interrupts = <0x17 0x1>; + }; + + plb { + compatible = "ibm,plb-440gx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <160000000>; // 160MHz + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <0x010 0x002>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <0x020 0x008 0x00a 0x001>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <80000000>; // 80MHz + + + EBC0: ebc { + compatible = "ibm,ebc-440gx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <80000000>; // 80MHz + + /* ranges property is supplied by zImage + * based on firmware's configuration of the + * EBC bridge */ + + interrupts = <0x5 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <4>; + device-width = <2>; + reg = <0x0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "root"; + reg = <0x180000 0x200000>; + }; + partition@380000 { + label = "user"; + reg = <0x380000 0x3bc0000>; + }; + partition@3f40000 { + label = "env"; + reg = <0x3f40000 0x80000>; + }; + partition@3fc0000 { + label = "u-boot"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; + + + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <0x40000700 0x00000020>; + }; + + ZMII0: emac-zmii@40000780 { + compatible = "ibm,zmii-440gx", "ibm,zmii"; + reg = <0x40000780 0x0000000c>; + }; + + RGMII0: emac-rgmii@40000790 { + compatible = "ibm,rgmii"; + reg = <0x40000790 0x00000008>; + }; + + TAH0: emac-tah@40000b50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <0x40000b50 0x00000030>; + }; + + TAH1: emac-tah@40000d50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <0x40000d50 0x00000030>; + }; + + EMAC0: ethernet@40000800 { + unused = <0x1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + unused = <0x1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + EMAC2: ethernet@40000c00 { + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0x0 0x4 0x1 0x4>; + reg = <0x40000c00 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <2>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + zmii-device = <&ZMII0>; + zmii-channel = <2>; + tah-device = <&TAH0>; + tah-channel = <0>; + }; + + EMAC3: ethernet@40000e00 { + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0x2 0x4 0x3 0x4>; + reg = <0x40000e00 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <3>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <3>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + zmii-device = <&ZMII0>; + zmii-channel = <3>; + tah-device = <&TAH1>; + tah-channel = <0>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <0x40000a00 0x000000d4>; + interrupt-parent = <&UIC0>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x00000100 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8 + 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8 + 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8 + 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8 + 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8 + 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8 + 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8 + >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@40000300"; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts new file mode 100644 index 000000000..372177b19 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + */ + +/dts-v1/; + +/ { + model = "tqc,tqm5200"; + compatible = "tqc,tqm5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { // PSC2 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>, + <0x02000000 0 0x90000000 0x90000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts new file mode 100644 index 000000000..eb4d8fd3f --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM 8540 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "tqc,tqm8540"; + compatible = "tqc,tqm8540"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8540-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8540-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <41 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus", + "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = <0x0 0x0 0xfe000000 0x02000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <4>; + device-width = <2>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "root"; + reg = <0x00180000 0x01dc0000>; + }; + partition@1f40000 { + label = "env1"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "env2"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "u-boot"; + reg = <0x01fc0000 0x00040000>; + read-only; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts new file mode 100644 index 000000000..fe5d3d873 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM 8541 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "tqc,tqm8541"; + compatible = "tqc,tqm8541"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8541-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8541-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts new file mode 100644 index 000000000..caa36c5ef --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM8548 Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8548"; + compatible = "tqc,tqm8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc@a0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xa0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy5>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@a0005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xa0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xa3000000 0x00008000 // CAN (2 x CC770) + 3 0x0 0xa3010000 0x00008000 // NAND FLASH + + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + + /* Note: NAND support needs to be enabled in U-Boot */ + upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; + }; + }; + + pci0: pci@a0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xa0008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xa2000000 0 0x01000000>; + }; + + pci1: pcie@a000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 (PEX) */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xaf000000 0 0x08000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xa000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xb0000000 0x02000000 0 + 0xb0000000 0 0x10000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts new file mode 100644 index 000000000..12a64410f --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM8548 Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8548"; + compatible = "tqc,tqm8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy5>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@e0005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xe3000000 0x00008000 // CAN (2 x CC770) + 3 0x0 0xe3010000 0x00008000 // NAND FLASH + + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + + /* Note: NAND support needs to be enabled in U-Boot */ + upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 (PEX) */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xef000000 0 0x08000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xc0000000 0x02000000 0 + 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts new file mode 100644 index 000000000..4be05b7d2 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM 8555 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "tqc,tqm8555"; + compatible = "tqc,tqm8555"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8555-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts new file mode 100644 index 000000000..8ea485024 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM 8560 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger + */ + +/dts-v1/; + +/include/ "fsl/e500v1_power_isa.dtsi" + +/ { + model = "tqc,tqm8560"; + compatible = "tqc,tqm8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; + interrupt-parent = <&cpmpic>; + }; + + serial1: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + + enet2: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + }; + + localbus@e0005000 { + compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527) + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can0@2,0 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + }; + + can1@2,100 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts new file mode 100644 index 000000000..d16cdfd81 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM8XX Device Tree Source + * + * Heiko Schocher + * 2010 DENX Software Engineering GmbH + */ + +/dts-v1/; + +/ { + model = "TQM8xx"; + compatible = "tqc,tqm8xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + mdio1 = &phy1; + serial0 = &smc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,860@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x1000>; // L1, 4K + i-cache-size = <0x1000>; // L1, 4K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + localbus@fff00100 { + compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfff00100 0x40>; + + ranges = < + 0x0 0x0 0x40000000 0x800000 + 0x3 0x0 0xc0000000 0x200 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@3,0 { + compatible = "intc,82527"; + reg = <3 0x0 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@3,100 { + compatible = "intc,82527"; + reg = <3 0x100 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + }; + + soc@fff00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfff00000 0x00004000>; + + phy1: mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + }; + }; + + eth1: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <1>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc860-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc860-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc860-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc860-cpm-pic", + "fsl,cpm1-pic"; + }; + + + smc1: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc860-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + eth0: ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc860-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <0>; + fixed-link = <0 0 10 0 0>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts new file mode 100644 index 000000000..dff1ea074 --- /dev/null +++ b/arch/powerpc/boot/dts/turris1x.dts @@ -0,0 +1,520 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Turris 1.x Device Tree Source + * + * Copyright 2013 - 2022 CZ.NIC z.s.p.o. (http://www.nic.cz/) + * + * Pinout, Schematics and Altium hardware design files are open source + * and available at: https://docs.turris.cz/hw/turris-1x/turris-1x/ + */ + +#include +#include +#include +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "Turris 1.x"; + compatible = "cznic,turris1x"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x00100000>; + + i2c@3000 { + /* PCA9557PW GPIO controller for boot config */ + gpio-controller@18 { + compatible = "nxp,pca9557"; + label = "bootcfg"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* STM32F030R8T6 MCU for power control */ + power-control@2a { + /* + * Turris Power Control firmware runs on STM32F0 MCU. + * This firmware is open source and available at: + * https://gitlab.nic.cz/turris/hw/turris_power_control + */ + reg = <0x2a>; + }; + + /* DDR3 SPD/EEPROM PSWP instruction */ + eeprom@32 { + reg = <0x32>; + }; + + /* SA56004ED temperature control */ + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */ + <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */ + #address-cells = <1>; + #size-cells = <0>; + + /* Local temperature sensor (SA56004ED internal) */ + channel@0 { + reg = <0>; + label = "board"; + }; + + /* Remote temperature sensor (D+/D- connected to P2020 CPU Temperature Diode) */ + channel@1 { + reg = <1>; + label = "cpu"; + }; + }; + + /* DDR3 SPD/EEPROM */ + eeprom@52 { + compatible = "atmel,spd"; + reg = <0x52>; + }; + + /* MCP79402-I/ST Protected EEPROM */ + eeprom@57 { + reg = <0x57>; + }; + + /* ATSHA204-TH-DA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204"; + reg = <0x64>; + }; + + /* IDT6V49205BNLGI clock generator */ + clock-generator@69 { + compatible = "idt,6v49205b"; + reg = <0x69>; + }; + + /* MCP79402-I/ST RTC */ + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + interrupt-parent = <&gpio>; + interrupts = <14 0>; /* GPIO14 - MFP pin */ + }; + }; + + /* SPI on connector P1 */ + spi0: spi@7000 { + }; + + gpio: gpio-controller@fc00 { + #interrupt-cells = <2>; + interrupt-controller; + }; + + /* Connected to SMSC USB2412-DZK 2-Port USB 2.0 Hub Controller */ + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + enet0: ethernet@24000 { + /* Connected to port 6 of QCA8337N-AL3C switch */ + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio@24520 { + /* KSZ9031RNXCA ethernet phy for WAN port */ + phy: ethernet-phy@7 { + interrupts = <3 1 0 0>; + reg = <0x7>; + }; + + /* QCA8337N-AL3C switch with integrated ethernet PHYs for LAN ports */ + switch@10 { + compatible = "qca,qca8337"; + interrupts = <2 1 0 0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&enet1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <0x3b9ac9fb>; + fsl,tmr-fiper2 = <0x0001869b>; + fsl,max-adj = <249999999>; + }; + + enet1: ethernet@25000 { + /* Connected to port 0 of QCA8337N-AL3C switch */ + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet2: ethernet@26000 { + /* Connected to KSZ9031RNXCA ethernet phy (WAN port) */ + label = "wan"; + phy-handle = <&phy>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + status = "disabled"; + }; + + sdhc@2e000 { + bus-width = <4>; + cd-gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xef000000 0x01000000>, /* NOR */ + <0x1 0x0 0x0 0xff800000 0x00040000>, /* NAND */ + <0x3 0x0 0x0 0xffa00000 0x00020000>; /* CPLD */ + + /* S29GL128P90TFIR10 NOR */ + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 128 kB for Device Tree Blob */ + reg = <0x00000000 0x00020000>; + label = "dtb"; + }; + + partition@20000 { + /* 1.7 MB for Linux Kernel Image */ + reg = <0x00020000 0x001a0000>; + label = "kernel"; + }; + + partition@1c0000 { + /* 1.5 MB for Rescue JFFS2 Root File System */ + reg = <0x001c0000 0x00180000>; + label = "rescue"; + }; + + partition@340000 { + /* 11 MB for TAR.XZ Archive with Factory content of NAND Root File System */ + reg = <0x00340000 0x00b00000>; + label = "factory"; + }; + + partition@e40000 { + /* 768 kB for Certificates JFFS2 File System */ + reg = <0x00e40000 0x000c0000>; + label = "certificates"; + }; + + /* free unused space 0x00f00000-0x00f20000 */ + + partition@f20000 { + /* 128 kB for U-Boot Environment Variables */ + reg = <0x00f20000 0x00020000>; + label = "u-boot-env"; + }; + + partition@f40000 { + /* 768 kB for U-Boot Bootloader Image */ + reg = <0x00f40000 0x000c0000>; + label = "u-boot"; + }; + }; + }; + + /* MT29F2G08ABAEAWP:E NAND */ + nand@1,0 { + compatible = "fsl,p2020-fcm-nand", "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x00040000>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 256 MB for UBI with one volume: UBIFS Root File System */ + reg = <0x00000000 0x10000000>; + label = "rootfs"; + }; + }; + }; + + /* LCMXO1200C-3FTN256C FPGA */ + cpld@3,0 { + /* + * Turris CPLD firmware which runs on this Lattice FPGA, + * is extended version of P1021RDB-PC CPLD v4.1 firmware. + * It is backward compatible with its original version + * and the only extension is support for Turris LEDs. + * Turris CPLD firmware is open source and available at: + * https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v + */ + compatible = "cznic,turris1x-cpld", "fsl,p1021rdb-pc-cpld", "simple-bus", "syscon"; + reg = <0x3 0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3 0x0 0x00020000>; + + /* MAX6370KA+T watchdog */ + watchdog@2 { + /* + * CPLD firmware maps SET0, SET1 and SET2 + * input logic of MAX6370KA+T chip to CPLD + * memory space at byte offset 0x2. WDI + * input logic is outside of the CPLD and + * connected via external GPIO. + */ + compatible = "maxim,max6370"; + reg = <0x02 0x01>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + reboot@d { + /* + * CPLD firmware which manages system reset and + * watchdog registers has bugs. It does not + * autoclear system reset register after change + * and watchdog ignores reset line on immediate + * succeeding reset cycle triggered by watchdog. + * These bugs have to be workarounded in U-Boot + * bootloader. So use system reset via syscon as + * a last resort because older U-Boot versions + * do not have workaround for watchdog. + * + * Reset method via rstcr's global-utilities + * (the preferred one) has priority level 128, + * watchdog has priority level 0 and default + * syscon-reboot priority level is 192. + * + * So define syscon-reboot with custom priority + * level 64 (between rstcr and watchdog) because + * rstcr should stay as default preferred reset + * method and reset via watchdog is more broken + * than system reset via syscon. + */ + compatible = "syscon-reboot"; + reg = <0x0d 0x01>; + offset = <0x0d>; + mask = <0x01>; + value = <0x01>; + priority = <64>; + }; + + led-controller@13 { + /* + * LEDs are controlled by CPLD firmware. + * All five LAN LEDs share common RGB settings + * and so it is not possible to set different + * colors on different LAN ports. + */ + compatible = "cznic,turris1x-leds"; + reg = <0x13 0x1d>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0x0>; + color = ; + function = LED_FUNCTION_WAN; + }; + + multi-led@1 { + reg = <0x1>; + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + }; + + multi-led@2 { + reg = <0x2>; + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + }; + + multi-led@3 { + reg = <0x3>; + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + }; + + multi-led@4 { + reg = <0x4>; + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + }; + + multi-led@5 { + reg = <0x5>; + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + }; + + multi-led@6 { + reg = <0x6>; + color = ; + function = LED_FUNCTION_WLAN; + }; + + multi-led@7 { + reg = <0x7>; + color = ; + function = LED_FUNCTION_POWER; + }; + }; + }; + }; + + pci2: pcie@ffe08000 { + /* + * PCIe bus for on-board TUSB7340RKM USB 3.0 xHCI controller. + * This xHCI controller is available only on Turris 1.1 boards. + * Turris 1.0 boards have nothing connected to this PCIe bus, + * so system would see only PCIe Root Port of this PCIe Root + * Complex. TUSB7340RKM xHCI controller has four SuperSpeed + * channels. Channel 0 is connected to the front USB 3.0 port, + * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe + * slot 1 (CN5), channels 2 and 3 to connector P600. + * + * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller + * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required. + * So allocate 128kB of PCIe MEM for this PCIe bus. + */ + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; + + pci1: pcie@ffe09000 { + /* PCIe bus on mPCIe slot 2 (CN6) for expansion mPCIe card */ + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x02000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; + + pci0: pcie@ffe0a000 { + /* + * PCIe bus on mPCIe slot 1 (CN5) for expansion mPCIe card. + * Turris 1.1 boards have in this mPCIe slot additional USB 2.0 + * pins via channel 1 of TUSB7340RKM xHCI controller and also + * additional SIM card slot, both for USB-based WWAN cards. + */ + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts new file mode 100644 index 000000000..2e34d0191 --- /dev/null +++ b/arch/powerpc/boot/dts/uc101.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Manroland uc101 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher + * Copyright 2006-2007 Secret Lab Technologies Ltd. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "manroland,uc101"; + compatible = "manroland,uc101"; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + spi@f00 { + status = "disabled"; + }; + + usb@1000 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + fsl,preserve-clocking; + clock-frequency = <400000>; + + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00010000>; + }; + partition@750000 { + label = "red. Env"; + reg = <0x00750000 0x00010000>; + }; + partition@760000 { + label = "reserve"; + reg = <0x00760000 0x000a0000>; + }; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts new file mode 100644 index 000000000..aa62d08e9 --- /dev/null +++ b/arch/powerpc/boot/dts/warp.dts @@ -0,0 +1,307 @@ +/* + * Device Tree Source for PIKA Warp + * + * Copyright (c) 2008-2009 PIKA Technologies + * Sean MacLennan + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "pika,warp"; + compatible = "pika,warp"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + fpga@2,0 { + compatible = "pika,fpga"; + reg = <0x00000002 0x00000000 0x00001000>; + interrupts = <0x18 0x8>; + interrupt-parent = <&UIC0>; + }; + + fpga@2,2000 { + compatible = "pika,fpga-sgl"; + reg = <0x00000002 0x00002000 0x00000200>; + }; + + fpga@2,4000 { + compatible = "pika,fpga-sd"; + reg = <0x00000002 0x00004000 0x00004000>; + }; + + nor@0,0 { + compatible = "amd,s29gl032a", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "splash"; + reg = <0x00000000 0x00010000>; + }; + partition@300000 { + label = "fpga"; + reg = <0x0300000 0x00040000>; + }; + partition@340000 { + label = "env"; + reg = <0x0340000 0x00040000>; + }; + partition@380000 { + label = "u-boot"; + reg = <0x0380000 0x00080000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x03E00000>; + }; + partition@40000000 { + label = "persistent"; + reg = <0x04000000 0x04000000>; + }; + partition@80000000 { + label = "persistent1"; + reg = <0x08000000 0x04000000>; + }; + partition@C0000000 { + label = "persistent2"; + reg = <0x0C000000 0x04000000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + ad7414@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + interrupts = <0x19 0x8>; + interrupt-parent = <&UIC0>; + }; + + /* This will create 52 and 53 */ + at24@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; + }; + + GPIO1: gpio@ef600c00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600c00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; + }; + + power-leds { + compatible = "warp-power-leds"; + green { + gpios = <&GPIO1 0 0>; + }; + red { + gpios = <&GPIO1 1 0>; + }; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; + interrupt-parent = < &UIC1 >; + }; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts new file mode 100644 index 000000000..473d9feb9 --- /dev/null +++ b/arch/powerpc/boot/dts/wii.dts @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/boot/dts/wii.dts + * + * Nintendo Wii platform device tree source + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +/dts-v1/; +#include +#include + +/* + * This is commented-out for now. + * Until a later patch is merged, the kernel can use only the first + * contiguous RAM range and will BUG() if the memreserve is outside + * that range. + */ +/*/memreserve/ 0x10000000 0x0004000;*/ /* DSP RAM */ + +/ { + model = "nintendo,wii"; + compatible = "nintendo,wii"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */ + 0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,broadway@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <729000000>; /* 729MHz */ + bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */ + timebase-frequency = <60750000>; /* 243MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained in the hollywood chipset */ + hollywood { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood"; + ranges = <0x0c000000 0x0c000000 0x01000000 + 0x0d000000 0x0d000000 0x00800000 + 0x0d800000 0x0d800000 0x00800000>; + interrupt-parent = <&PIC0>; + + video@c002000 { + compatible = "nintendo,hollywood-vi", + "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@c003000 { + compatible = "nintendo,hollywood-pi", + "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC0: pic0 { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood-dsp", + "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + }; + + gamepad-controller@d006400 { + compatible = "nintendo,hollywood-si", + "nintendo,flipper-si"; + reg = <0x0d006400 0x100>; + interrupts = <3>; + }; + + audio@c006c00 { + compatible = "nintendo,hollywood-ai", + "nintendo,flipper-ai"; + reg = <0x0d006c00 0x20>; + interrupts = <6>; + }; + + /* External Interface bus */ + exi@d006800 { + compatible = "nintendo,hollywood-exi", + "nintendo,flipper-exi"; + reg = <0x0d006800 0x40>; + virtual-reg = <0x0d006800>; + interrupts = <4>; + }; + + usb@d040000 { + compatible = "nintendo,hollywood-usb-ehci", + "usb-ehci"; + reg = <0x0d040000 0x100>; + interrupts = <4>; + interrupt-parent = <&PIC1>; + }; + + usb@d050000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d050000 0x100>; + interrupts = <5>; + interrupt-parent = <&PIC1>; + }; + + usb@d060000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d060000 0x100>; + interrupts = <6>; + interrupt-parent = <&PIC1>; + }; + + sd@d070000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d070000 0x200>; + interrupts = <7>; + interrupt-parent = <&PIC1>; + }; + + sdio@d080000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d080000 0x200>; + interrupts = <8>; + interrupt-parent = <&PIC1>; + }; + + ipc@d000000 { + compatible = "nintendo,hollywood-ipc"; + reg = <0x0d000000 0x10>; + interrupts = <30>; + interrupt-parent = <&PIC1>; + }; + + PIC1: pic1@d800030 { + #interrupt-cells = <1>; + compatible = "nintendo,hollywood-pic"; + reg = <0x0d800030 0x10>; + interrupt-controller; + interrupts = <14>; + }; + + srnprot@d800060 { + compatible = "nintendo,hollywood-srnprot"; + reg = <0x0d800060 0x4>; + }; + + GPIO: gpio@d8000c0 { + #gpio-cells = <2>; + compatible = "nintendo,hollywood-gpio"; + reg = <0x0d8000c0 0x40>; + gpio-controller; + ngpios = <24>; + + gpio-line-names = + "POWER", "SHUTDOWN", "FAN", "DC_DC", + "DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN", + "SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK", + "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA", + "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3", + "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <10>; + interrupt-parent = <&PIC1>; + + /* + * This is commented out while a standard binding + * for i2c over gpio is defined. + */ + /* + i2c-video { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + + gpios = <&GPIO 15 0 + &GPIO 14 0>; + clock-frequency = <250000>; + no-clock-stretching; + scl-is-open-drain; + sda-is-open-drain; + sda-enforce-dir; + + AVE: audio-video-encoder@70 { + compatible = "nintendo,wii-audio-video-encoder"; + reg = <0x70>; + }; + }; + */ + }; + + control@d800100 { + compatible = "nintendo,hollywood-control"; + /* + * Both the address and length are wrong, according to + * Wiibrew this should be <0x0d800000 0x400>, but it + * requires refactoring the PIC1, GPIO and OTP nodes + * before changing that. + */ + reg = <0x0d800100 0xa0>; + }; + + otp@d8001ec { + compatible = "nintendo,hollywood-otp"; + reg = <0x0d8001ec 0x8>; + }; + + disk@d806000 { + compatible = "nintendo,hollywood-di"; + reg = <0x0d806000 0x40>; + interrupts = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* This is the blue LED in the disk drive slot */ + led-0 { + label = "wii:blue:drive_slot"; + gpios = <&GPIO 5 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-power { + label = "Power Button"; + gpios = <&GPIO 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + button-eject { + label = "Eject Button"; + gpios = <&GPIO 6 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts new file mode 100644 index 000000000..46c25bda9 --- /dev/null +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E + */ + +/dts-v1/; +/ { + model = "xes,xcalibur1501"; + compatible = "xes,xcalibur1501", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Flash 1 */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Flash 2 */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000 /* CS3: NAND CE2 */ + 4 0 0 0xe9000000 0x100000>; /* CS4: USB */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + usb@4,0 { + compatible = "nxp,usb-isp1761"; + reg = <4 0 0x100000>; + bus-width = <32>; + interrupt-parent = <&mpic>; + interrupts = <10 1>; + }; + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@6a { + compatible = "plx,pex8648"; + reg = <0x6a>; + }; + + /* On-board signals for VID, flash, serial */ + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC0/XMC0 signals */ + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC1/XMC1 signals */ + gpio3: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI signals (sysen, GA[4:0]) */ + gpio4: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI J5 GPIO and FAL/DEG/PRST */ + gpio5: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 front panel 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 front panel 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 3 PICMG2.16 backplane port 0 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 4 PICMG2.16 backplane port 1 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + * + * PCI Express controller 2 @ ef009000 is not used. + * This would have been pci1 on other mpc85xx platforms. + */ + + /* PCI Express controller 1, wired to PEX8648 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts new file mode 100644 index 000000000..74b346f2d --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by U-Boot + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@34 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR boot flash + 1 0x0 0xf8000000 0x04000000 // NOR expansion flash + 2 0x0 0xef800000 0x00010000 // NAND CE1 + 3 0x0 0xef840000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + /* U-Boot should fix this up */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000 + 0x01000000 0 0x00000000 0xe8000000 0 0x00800000>; + }; + + /* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */ +}; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts new file mode 100644 index 000000000..d491c7a8f --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E. This dts is for the + * xMon boot loader memory map which differs from U-Boot's. + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by boot loader + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@34 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xf8000000 0x08000000 // NOR boot flash + 1 0x0 0xf0000000 0x08000000 // NOR expansion flash + 2 0x0 0xe8000000 0x00010000 // NAND CE1 + 3 0x0 0xe8010000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>; + }; + + /* XMC PCIe */ + pci1: pcie@ef00a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x01000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xef00a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xc0000000 0x02000000 0 + 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; + + /* Needed for dtbImage boot wrapper compatibility */ + chosen { + stdout-path = &serial0; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts new file mode 100644 index 000000000..12184e179 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -0,0 +1,637 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5301 PMC/XMC module based on MPC8572E + */ + +/dts-v1/; +/ { + model = "xes,xpedite5301"; + compatible = "xes,xpedite5301", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to XMC P15 connector */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8112 for PMC interface */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts new file mode 100644 index 000000000..e8fc90c52 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -0,0 +1,704 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5330 3U CompactPCI module based on MPC8572E + */ + +/dts-v1/; +/ { + model = "xes,xpedite5330"; + compatible = "xes,xpedite5330", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "3U CompactPCI"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + pmcslots { + #address-cells = <1>; + #size-cells = <0>; + + pmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * monarch; + * module-present; + */ + }; + }; + + xmcslots { + #address-cells = <1>; + #size-cells = <0>; + + xmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * module-present; + */ + }; + }; + + cpci { + /* + * boolean properties (true if defined): + * system-controller; + */ + system-controller; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */ + pci0: pcie@ef008000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef008000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x0 + 0x01000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 2, PMC module via PEX8112 bridge */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, XMC P15 */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts new file mode 100644 index 000000000..2b5aa2f3a --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -0,0 +1,635 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5370 3U VPX single-board computer based on MPC8572E + */ + +/dts-v1/; +/ { + model = "xes,xpedite5370"; + compatible = "xes,xpedite5370", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "st,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to VPX P1,P2 backplane */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8518 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts new file mode 100644 index 000000000..56508785c --- /dev/null +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -0,0 +1,332 @@ +/* + * Device Tree Source for AMCC Yosemite + * + * Copyright 2008 IBM Corp. + * Josh Boyer + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,yosemite"; + compatible = "amcc,yosemite"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02540000>; + }; + partition@3f40000 { + label = "env"; + reg = <0x03f40000 0x00040000>; + }; + partition@3f80000 { + label = "u-boot"; + reg = <0x03f80000 0x00080000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + status = "disabled"; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + status = "disabled"; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + spi@ef600900 { + compatible = "amcc,spi-440ep"; + reg = <0xef600900 0x00000006>; + interrupts = <0x8 0x4>; + interrupt-parent = <&UIC0>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x4 0x9 0x4>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 12 */ + 0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8 + >; + }; + }; + + chosen { + stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c new file mode 100644 index 000000000..add2316d3 --- /dev/null +++ b/arch/powerpc/boot/ebony.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" + +static u8 *ebony_mac0, *ebony_mac1; + +#define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" +#define EBONY_FPGA_FLASH_SEL 0x01 +#define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" + +static void ebony_flashsel_fixup(void) +{ + void *devp; + u32 reg[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_reg0 = 0x0; + + devp = finddevice(EBONY_FPGA_PATH); + if (!devp) + fatal("Couldn't locate FPGA node %s\n\r", EBONY_FPGA_PATH); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("%s has missing or invalid virtual-reg property\n\r", + EBONY_FPGA_PATH); + + fpga_reg0 = in_8(fpga); + + devp = finddevice(EBONY_SMALL_FLASH_PATH); + if (!devp) + fatal("Couldn't locate small flash node %s\n\r", + EBONY_SMALL_FLASH_PATH); + + if (getprop(devp, "reg", reg, sizeof(reg)) != sizeof(reg)) + fatal("%s has reg property of unexpected size\n\r", + EBONY_SMALL_FLASH_PATH); + + /* Invert address bit 14 (IBM-endian) if FLASH_SEL fpga bit is set */ + if (fpga_reg0 & EBONY_FPGA_FLASH_SEL) + reg[1] ^= 0x80000; + + setprop(devp, "reg", reg, sizeof(reg)); +} + +static void ebony_fixups(void) +{ + // FIXME: sysclk should be derived by reading the FPGA registers + unsigned long sysclk = 33000000; + + ibm440gp_fixup_clocks(sysclk, 6 * 1843200); + ibm4xx_sdram_fixup_memsize(); + dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0); + dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ebony_flashsel_fixup(); +} + +void ebony_init(void *mac0, void *mac1) +{ + platform_ops.fixups = ebony_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + ebony_mac0 = mac0; + ebony_mac1 = mac1; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/elf.h b/arch/powerpc/boot/elf.h new file mode 100644 index 000000000..f6aa7c20f --- /dev/null +++ b/arch/powerpc/boot/elf.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_ELF_H_ +#define _PPC_BOOT_ELF_H_ + +/* 32-bit ELF base types. */ +typedef unsigned int Elf32_Addr; +typedef unsigned short Elf32_Half; +typedef unsigned int Elf32_Off; +typedef signed int Elf32_Sword; +typedef unsigned int Elf32_Word; + +/* 64-bit ELF base types. */ +typedef unsigned long long Elf64_Addr; +typedef unsigned short Elf64_Half; +typedef signed short Elf64_SHalf; +typedef unsigned long long Elf64_Off; +typedef signed int Elf64_Sword; +typedef unsigned int Elf64_Word; +typedef unsigned long long Elf64_Xword; +typedef signed long long Elf64_Sxword; + +/* These constants are for the segment types stored in the image headers */ +#define PT_NULL 0 +#define PT_LOAD 1 +#define PT_DYNAMIC 2 +#define PT_INTERP 3 +#define PT_NOTE 4 +#define PT_SHLIB 5 +#define PT_PHDR 6 +#define PT_TLS 7 /* Thread local storage segment */ +#define PT_LOOS 0x60000000 /* OS-specific */ +#define PT_HIOS 0x6fffffff /* OS-specific */ +#define PT_LOPROC 0x70000000 +#define PT_HIPROC 0x7fffffff +#define PT_GNU_EH_FRAME 0x6474e550 + +#define PT_GNU_STACK (PT_LOOS + 0x474e551) + +/* These constants define the different elf file types */ +#define ET_NONE 0 +#define ET_REL 1 +#define ET_EXEC 2 +#define ET_DYN 3 +#define ET_CORE 4 +#define ET_LOPROC 0xff00 +#define ET_HIPROC 0xffff + +/* These constants define the various ELF target machines */ +#define EM_NONE 0 +#define EM_PPC 20 /* PowerPC */ +#define EM_PPC64 21 /* PowerPC64 */ + +#define EI_NIDENT 16 + +typedef struct elf32_hdr { + unsigned char e_ident[EI_NIDENT]; + Elf32_Half e_type; + Elf32_Half e_machine; + Elf32_Word e_version; + Elf32_Addr e_entry; /* Entry point */ + Elf32_Off e_phoff; + Elf32_Off e_shoff; + Elf32_Word e_flags; + Elf32_Half e_ehsize; + Elf32_Half e_phentsize; + Elf32_Half e_phnum; + Elf32_Half e_shentsize; + Elf32_Half e_shnum; + Elf32_Half e_shstrndx; +} Elf32_Ehdr; + +typedef struct elf64_hdr { + unsigned char e_ident[16]; /* ELF "magic number" */ + Elf64_Half e_type; + Elf64_Half e_machine; + Elf64_Word e_version; + Elf64_Addr e_entry; /* Entry point virtual address */ + Elf64_Off e_phoff; /* Program header table file offset */ + Elf64_Off e_shoff; /* Section header table file offset */ + Elf64_Word e_flags; + Elf64_Half e_ehsize; + Elf64_Half e_phentsize; + Elf64_Half e_phnum; + Elf64_Half e_shentsize; + Elf64_Half e_shnum; + Elf64_Half e_shstrndx; +} Elf64_Ehdr; + +/* These constants define the permissions on sections in the program + header, p_flags. */ +#define PF_R 0x4 +#define PF_W 0x2 +#define PF_X 0x1 + +typedef struct elf32_phdr { + Elf32_Word p_type; + Elf32_Off p_offset; + Elf32_Addr p_vaddr; + Elf32_Addr p_paddr; + Elf32_Word p_filesz; + Elf32_Word p_memsz; + Elf32_Word p_flags; + Elf32_Word p_align; +} Elf32_Phdr; + +typedef struct elf64_phdr { + Elf64_Word p_type; + Elf64_Word p_flags; + Elf64_Off p_offset; /* Segment file offset */ + Elf64_Addr p_vaddr; /* Segment virtual address */ + Elf64_Addr p_paddr; /* Segment physical address */ + Elf64_Xword p_filesz; /* Segment size in file */ + Elf64_Xword p_memsz; /* Segment size in memory */ + Elf64_Xword p_align; /* Segment alignment, file & memory */ +} Elf64_Phdr; + +#define EI_MAG0 0 /* e_ident[] indexes */ +#define EI_MAG1 1 +#define EI_MAG2 2 +#define EI_MAG3 3 +#define EI_CLASS 4 +#define EI_DATA 5 +#define EI_VERSION 6 +#define EI_OSABI 7 +#define EI_PAD 8 + +#define ELFMAG0 0x7f /* EI_MAG */ +#define ELFMAG1 'E' +#define ELFMAG2 'L' +#define ELFMAG3 'F' +#define ELFMAG "\177ELF" +#define SELFMAG 4 + +#define ELFCLASSNONE 0 /* EI_CLASS */ +#define ELFCLASS32 1 +#define ELFCLASS64 2 +#define ELFCLASSNUM 3 + +#define ELFDATANONE 0 /* e_ident[EI_DATA] */ +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 + +#define EV_NONE 0 /* e_version, EI_VERSION */ +#define EV_CURRENT 1 +#define EV_NUM 2 + +#define ELFOSABI_NONE 0 +#define ELFOSABI_LINUX 3 + +struct elf_info { + unsigned long loadsize; + unsigned long memsize; + unsigned long elfoffset; +}; +int parse_elf64(void *hdr, struct elf_info *info); +int parse_elf32(void *hdr, struct elf_info *info); + +#endif /* _PPC_BOOT_ELF_H_ */ diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c new file mode 100644 index 000000000..9e6cbdfdc --- /dev/null +++ b/arch/powerpc/boot/elf_util.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) Paul Mackerras 1997. + * + * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner. + */ +#include +#include +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" + +int parse_elf64(void *hdr, struct elf_info *info) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && +#ifdef __LITTLE_ENDIAN__ + elf64->e_ident[EI_DATA] == ELFDATA2LSB && +#else + elf64->e_ident[EI_DATA] == ELFDATA2MSB && +#endif + (elf64->e_type == ET_EXEC || + elf64->e_type == ET_DYN) && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + info->loadsize = (unsigned long)elf64ph->p_filesz; + info->memsize = (unsigned long)elf64ph->p_memsz; + info->elfoffset = (unsigned long)elf64ph->p_offset; + + return 1; +} + +int parse_elf32(void *hdr, struct elf_info *info) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + (elf32->e_type == ET_EXEC || + elf32->e_type == ET_DYN) && + elf32->e_machine == EM_PPC)) + return 0; + + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD) + break; + if (i >= elf32->e_phnum) + return 0; + + info->loadsize = elf32ph->p_filesz; + info->memsize = elf32ph->p_memsz; + info->elfoffset = elf32ph->p_offset; + return 1; +} diff --git a/arch/powerpc/boot/ep8248e.c b/arch/powerpc/boot/ep8248e.c new file mode 100644 index 000000000..2ab9e0d8c --- /dev/null +++ b/arch/powerpc/boot/ep8248e.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Embedded Planet EP8248E with PlanetCore firmware + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "pq2.h" + +static char *table; +static u64 mem_size; + +#include + +static void platform_fixups(void) +{ + u64 val; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + + pq2_fixup_clocks(val); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/ep88xc.c b/arch/powerpc/boot/ep88xc.c new file mode 100644 index 000000000..1c277a13b --- /dev/null +++ b/arch/powerpc/boot/ep88xc.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Embedded Planet EP88xC with PlanetCore firmware + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "mpc8xx.h" + +static char *table; +static u64 mem_size; + +static void platform_fixups(void) +{ + u64 val; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + + mpc885_fixup_clocks(val); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/epapr-wrapper.c b/arch/powerpc/boot/epapr-wrapper.c new file mode 100644 index 000000000..01262f50b --- /dev/null +++ b/arch/powerpc/boot/epapr-wrapper.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +extern void epapr_platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, + unsigned long r7); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + epapr_platform_init(r3, r4, r5, r6, r7); +} diff --git a/arch/powerpc/boot/epapr.c b/arch/powerpc/boot/epapr.c new file mode 100644 index 000000000..7c5b26ade --- /dev/null +++ b/arch/powerpc/boot/epapr.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Bootwrapper for ePAPR compliant firmwares + * + * Copyright 2010 David Gibson , IBM Corporation. + * + * Based on earlier bootwrappers by: + * (c) Benjamin Herrenschmidt , IBM Corp,\ + * and + * Scott Wood + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "io.h" +#include + +BSS_STACK(4096); + +#define EPAPR_SMAGIC 0x65504150 +#define EPAPR_EMAGIC 0x45504150 + +static unsigned epapr_magic; +static unsigned long ima_size; +static unsigned long fdt_addr; + +static void platform_fixups(void) +{ + if ((epapr_magic != EPAPR_EMAGIC) + && (epapr_magic != EPAPR_SMAGIC)) + fatal("r6 contained 0x%08x instead of ePAPR magic number\n", + epapr_magic); + + if (ima_size < (unsigned long)_end) + printf("WARNING: Image loaded outside IMA!" + " (_end=%p, ima_size=0x%lx)\n", _end, ima_size); + if (ima_size < fdt_addr) + printf("WARNING: Device tree address is outside IMA!" + "(fdt_addr=0x%lx, ima_size=0x%lx)\n", fdt_addr, + ima_size); + if (ima_size < fdt_addr + fdt_totalsize((void *)fdt_addr)) + printf("WARNING: Device tree extends outside IMA!" + " (fdt_addr=0x%lx, size=0x%x, ima_size=0x%lx\n", + fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size); +} + +void epapr_platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + epapr_magic = r6; + ima_size = r7; + fdt_addr = r3; + + /* FIXME: we should process reserve entries */ + + simple_alloc_init(_end, ima_size - (unsigned long)_end, 32, 64); + + fdt_init((void *)fdt_addr); + + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/fixed-head.S b/arch/powerpc/boot/fixed-head.S new file mode 100644 index 000000000..4346c750c --- /dev/null +++ b/arch/powerpc/boot/fixed-head.S @@ -0,0 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + .text + .global _zimage_start +_zimage_start: + b _zimage_start_lib diff --git a/arch/powerpc/boot/fixup-headers.sed b/arch/powerpc/boot/fixup-headers.sed new file mode 100644 index 000000000..96362428e --- /dev/null +++ b/arch/powerpc/boot/fixup-headers.sed @@ -0,0 +1,12 @@ +# Copyright 2016 IBM Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. + +s@#include @@; +s@\"zlib_inflate/\([^\"]*\).*@"\1"@; +s@@@; + +s@__used@@; +s@]*\).*@"\1"@; diff --git a/arch/powerpc/boot/fsl-soc.c b/arch/powerpc/boot/fsl-soc.c new file mode 100644 index 000000000..01bad8ea6 --- /dev/null +++ b/arch/powerpc/boot/fsl-soc.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Freescale SOC support functions + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "stdio.h" + +static u32 prop_buf[MAX_PROP_LEN / 4]; + +u32 *fsl_get_immr(void) +{ + void *soc; + unsigned long ret = 0; + + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + int size; + u32 naddr; + + size = getprop(soc, "#address-cells", prop_buf, MAX_PROP_LEN); + if (size == 4) + naddr = prop_buf[0]; + else + naddr = 2; + + if (naddr != 1 && naddr != 2) + goto err; + + size = getprop(soc, "ranges", prop_buf, MAX_PROP_LEN); + + if (size < 12) + goto err; + if (prop_buf[0] != 0) + goto err; + if (naddr == 2 && prop_buf[1] != 0) + goto err; + + if (!dt_xlate_addr(soc, prop_buf + naddr, 8, &ret)) + ret = 0; + } + +err: + if (!ret) + printf("fsl_get_immr: Failed to find immr base\r\n"); + + return (u32 *)ret; +} diff --git a/arch/powerpc/boot/fsl-soc.h b/arch/powerpc/boot/fsl-soc.h new file mode 100644 index 000000000..00b2cb89f --- /dev/null +++ b/arch/powerpc/boot/fsl-soc.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_FSL_SOC_H_ +#define _PPC_BOOT_FSL_SOC_H_ + +#include "types.h" + +u32 *fsl_get_immr(void); + +#endif diff --git a/arch/powerpc/boot/gamecube-head.S b/arch/powerpc/boot/gamecube-head.S new file mode 100644 index 000000000..ccf5f1045 --- /dev/null +++ b/arch/powerpc/boot/gamecube-head.S @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * arch/powerpc/boot/gamecube-head.S + * + * Nintendo GameCube bootwrapper entry. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * + * We enable the caches if not already enabled, enable the MMU with an + * identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + b _zimage_start_lib + diff --git a/arch/powerpc/boot/gamecube.c b/arch/powerpc/boot/gamecube.c new file mode 100644 index 000000000..d030612fd --- /dev/null +++ b/arch/powerpc/boot/gamecube.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/boot/gamecube.c + * + * Nintendo GameCube bootwrapper support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 16*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + if (ug_probe()) + console_ops.write = ug_console_write; +} + diff --git a/arch/powerpc/boot/hack-coff.c b/arch/powerpc/boot/hack-coff.c new file mode 100644 index 000000000..6bf0c9430 --- /dev/null +++ b/arch/powerpc/boot/hack-coff.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * hack-coff.c - hack the header of an xcoff file to fill in + * a few fields needed by the Open Firmware xcoff loader on + * Power Macs but not initialized by objcopy. + * + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include +#include +#include +#include +#include "rs6000.h" + +#define AOUT_MAGIC 0x010b + +#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \ + + ((unsigned char *)(x))[1]) +#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \ + ((unsigned char *)(x))[1] = (v) & 0xff) +#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \ + + (((unsigned char *)(x))[1] << 16) \ + + (((unsigned char *)(x))[2] << 8) \ + + ((unsigned char *)(x))[3]) + +int +main(int ac, char **av) +{ + int fd; + int i, nsect; + int aoutsz; + struct external_filehdr fhdr; + struct aouthdr aout; + struct external_scnhdr shdr; + + if (ac != 2) { + fprintf(stderr, "Usage: hack-coff coff-file\n"); + exit(1); + } + if ((fd = open(av[1], 2)) == -1) { + perror(av[2]); + exit(1); + } + if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr)) + goto readerr; + i = get_16be(fhdr.f_magic); + if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) { + fprintf(stderr, "%s: not an xcoff file\n", av[1]); + exit(1); + } + aoutsz = get_16be(fhdr.f_opthdr); + if (read(fd, &aout, aoutsz) != aoutsz) + goto readerr; + nsect = get_16be(fhdr.f_nscns); + for (i = 0; i < nsect; ++i) { + if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr)) + goto readerr; + if (strcmp(shdr.s_name, ".text") == 0) { + put_16be(aout.o_snentry, i+1); + put_16be(aout.o_sntext, i+1); + } else if (strcmp(shdr.s_name, ".data") == 0) { + put_16be(aout.o_sndata, i+1); + } else if (strcmp(shdr.s_name, ".bss") == 0) { + put_16be(aout.o_snbss, i+1); + } + } + put_16be(aout.magic, AOUT_MAGIC); + if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1 + || write(fd, &aout, aoutsz) != aoutsz) { + fprintf(stderr, "%s: write error\n", av[1]); + exit(1); + } + close(fd); + exit(0); + +readerr: + fprintf(stderr, "%s: read error or file too short\n", av[1]); + exit(1); +} diff --git a/arch/powerpc/boot/holly.c b/arch/powerpc/boot/holly.c new file mode 100644 index 000000000..557c7a0ec --- /dev/null +++ b/arch/powerpc/boot/holly.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2007 IBM Corporation + * + * Stephen Winiecki + * Josh Boyer + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "io.h" + +BSS_STACK(4096); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 0x8000000 - (u32)_end; /* 128M */ + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh new file mode 100755 index 000000000..c3df6c27c --- /dev/null +++ b/arch/powerpc/boot/install.sh @@ -0,0 +1,37 @@ +#!/bin/sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Blatantly stolen from in arch/i386/boot/install.sh by Dave Hansen +# +# "make install" script for ppc64 architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) + +set -e + +# this should work for both the pSeries zImage and the iSeries vmlinux.sm +image_name=$(basename "$2") + + +echo "Warning: '${INSTALLKERNEL}' command not available... Copying" \ + "directly to $4/$image_name-$1" >&2 + +if [ -f "$4"/"$image_name"-"$1" ]; then + mv "$4"/"$image_name"-"$1" "$4"/"$image_name"-"$1".old +fi + +if [ -f "$4"/System.map-"$1" ]; then + mv "$4"/System.map-"$1" "$4"/System-"$1".old +fi + +cat "$2" > "$4"/"$image_name"-"$1" +cp "$3" "$4"/System.map-"$1" diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h new file mode 100644 index 000000000..5c6f90c34 --- /dev/null +++ b/arch/powerpc/boot/io.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _IO_H +#define _IO_H + +#include "types.h" + +/* + * Low-level I/O routines. + * + * Copied from (which has no copyright) + */ +static inline int in_8(const volatile unsigned char *addr) +{ + int ret; + + __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_8(volatile unsigned char *addr, int val) +{ + __asm__ __volatile__("stb%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + +static inline unsigned in_le16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + + return ret; +} + +static inline unsigned in_be16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sthbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sth%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + +static inline unsigned in_le32(const volatile unsigned *addr) +{ + unsigned ret; + + __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + return ret; +} + +static inline unsigned in_be32(const volatile unsigned *addr) +{ + unsigned ret; + + __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le32(volatile unsigned *addr, int val) +{ + __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be32(volatile unsigned *addr, int val) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + +static inline void sync(void) +{ + asm volatile("sync" : : : "memory"); +} + +static inline void eieio(void) +{ + asm volatile("eieio" : : : "memory"); +} + +static inline void barrier(void) +{ + asm volatile("" : : : "memory"); +} + +#endif /* _IO_H */ diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c new file mode 100644 index 000000000..217d0d7a6 --- /dev/null +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * This file does the necessary interface mapping between the bootwrapper + * device tree operations and the interface provided by shared source + * files flatdevicetree.[ch]. + * + * Copyright 2007 David Gibson, IBM Corporation. + */ + +#include +#include +#include +#include +#include "ops.h" + +#define DEBUG 0 +#define BAD_ERROR(err) (((err) < 0) \ + && ((err) != -FDT_ERR_NOTFOUND) \ + && ((err) != -FDT_ERR_EXISTS)) + +#define check_err(err) \ + ({ \ + if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \ + printf("%s():%d %s\n\r", __func__, __LINE__, \ + fdt_strerror(err)); \ + if (BAD_ERROR(err)) \ + exit(); \ + (err < 0) ? -1 : 0; \ + }) + +#define offset_devp(off) \ + ({ \ + unsigned long _offset = (off); \ + check_err(_offset) ? NULL : (void *)(_offset+1); \ + }) + +#define devp_offset_find(devp) (((unsigned long)(devp))-1) +#define devp_offset(devp) (devp ? ((unsigned long)(devp))-1 : 0) + +static void *fdt; +static void *buf; /* = NULL */ + +#define EXPAND_GRANULARITY 1024 + +static void expand_buf(int minexpand) +{ + int size = fdt_totalsize(fdt); + int rc; + + size = _ALIGN(size + minexpand, EXPAND_GRANULARITY); + buf = platform_ops.realloc(buf, size); + if (!buf) + fatal("Couldn't find %d bytes to expand device tree\n\r", size); + rc = fdt_open_into(fdt, buf, size); + if (rc != 0) + fatal("Couldn't expand fdt into new buffer: %s\n\r", + fdt_strerror(rc)); + + fdt = buf; +} + +static void *fdt_wrapper_finddevice(const char *path) +{ + return offset_devp(fdt_path_offset(fdt, path)); +} + +static int fdt_wrapper_getprop(const void *devp, const char *name, + void *buf, const int buflen) +{ + const void *p; + int len; + + p = fdt_getprop(fdt, devp_offset(devp), name, &len); + if (!p) + return check_err(len); + memcpy(buf, p, min(len, buflen)); + return len; +} + +static int fdt_wrapper_setprop(const void *devp, const char *name, + const void *buf, const int len) +{ + int rc; + + rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len); + if (rc == -FDT_ERR_NOSPACE) { + expand_buf(len + 16); + rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len); + } + + return check_err(rc); +} + +static int fdt_wrapper_del_node(const void *devp) +{ + return fdt_del_node(fdt, devp_offset(devp)); +} + +static void *fdt_wrapper_get_parent(const void *devp) +{ + return offset_devp(fdt_parent_offset(fdt, devp_offset(devp))); +} + +static void *fdt_wrapper_create_node(const void *devp, const char *name) +{ + int offset; + + offset = fdt_add_subnode(fdt, devp_offset(devp), name); + if (offset == -FDT_ERR_NOSPACE) { + expand_buf(strlen(name) + 16); + offset = fdt_add_subnode(fdt, devp_offset(devp), name); + } + + return offset_devp(offset); +} + +static void *fdt_wrapper_find_node_by_prop_value(const void *prev, + const char *name, + const char *val, + int len) +{ + int offset = fdt_node_offset_by_prop_value(fdt, devp_offset_find(prev), + name, val, len); + return offset_devp(offset); +} + +static void *fdt_wrapper_find_node_by_compatible(const void *prev, + const char *val) +{ + int offset = fdt_node_offset_by_compatible(fdt, devp_offset_find(prev), + val); + return offset_devp(offset); +} + +static char *fdt_wrapper_get_path(const void *devp, char *buf, int len) +{ + int rc; + + rc = fdt_get_path(fdt, devp_offset(devp), buf, len); + if (check_err(rc)) + return NULL; + return buf; +} + +static unsigned long fdt_wrapper_finalize(void) +{ + int rc; + + rc = fdt_pack(fdt); + if (rc != 0) + fatal("Couldn't pack flat tree: %s\n\r", + fdt_strerror(rc)); + return (unsigned long)fdt; +} + +void fdt_init(void *blob) +{ + int err; + int bufsize; + + dt_ops.finddevice = fdt_wrapper_finddevice; + dt_ops.getprop = fdt_wrapper_getprop; + dt_ops.setprop = fdt_wrapper_setprop; + dt_ops.get_parent = fdt_wrapper_get_parent; + dt_ops.create_node = fdt_wrapper_create_node; + dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value; + dt_ops.find_node_by_compatible = fdt_wrapper_find_node_by_compatible; + dt_ops.del_node = fdt_wrapper_del_node; + dt_ops.get_path = fdt_wrapper_get_path; + dt_ops.finalize = fdt_wrapper_finalize; + + /* Make sure the dt blob is the right version and so forth */ + fdt = blob; + bufsize = fdt_totalsize(fdt) + EXPAND_GRANULARITY; + buf = malloc(bufsize); + if(!buf) + fatal("malloc failed. can't relocate the device tree\n\r"); + + err = fdt_open_into(fdt, buf, bufsize); + + if (err != 0) + fatal("fdt_init(): %s\n\r", fdt_strerror(err)); + + fdt = buf; +} diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h new file mode 100644 index 000000000..9757d4f63 --- /dev/null +++ b/arch/powerpc/boot/libfdt_env.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARCH_POWERPC_BOOT_LIBFDT_ENV_H +#define _ARCH_POWERPC_BOOT_LIBFDT_ENV_H + +#include +#include + +#define INT_MAX ((int)(~0U>>1)) +#define UINT32_MAX ((u32)~0U) +#define INT32_MAX ((s32)(UINT32_MAX >> 1)) + +#include "of.h" + +typedef unsigned long uintptr_t; + +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + +#define fdt16_to_cpu(x) be16_to_cpu(x) +#define cpu_to_fdt16(x) cpu_to_be16(x) +#define fdt32_to_cpu(x) be32_to_cpu(x) +#define cpu_to_fdt32(x) cpu_to_be32(x) +#define fdt64_to_cpu(x) be64_to_cpu(x) +#define cpu_to_fdt64(x) cpu_to_be64(x) + +#endif /* _ARCH_POWERPC_BOOT_LIBFDT_ENV_H */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c new file mode 100644 index 000000000..2c0e2a1ca --- /dev/null +++ b/arch/powerpc/boot/main.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) Paul Mackerras 1997. + * + * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner. + */ +#include +#include +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" + +struct addr_range { + void *addr; + unsigned long size; +}; + +#undef DEBUG + +static struct addr_range prep_kernel(void) +{ + char elfheader[256]; + unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start; + unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start; + void *addr = 0; + struct elf_info ei; + long len; + int uncompressed_image = 0; + + len = partial_decompress(vmlinuz_addr, vmlinuz_size, + elfheader, sizeof(elfheader), 0); + /* assume uncompressed data if -1 is returned */ + if (len == -1) { + uncompressed_image = 1; + memcpy(elfheader, vmlinuz_addr, sizeof(elfheader)); + printf("No valid compressed data found, assume uncompressed data\n\r"); + } + + if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei)) + fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + + if (platform_ops.image_hdr) + platform_ops.image_hdr(elfheader); + + /* We need to alloc the memsize: gzip will expand the kernel + * text/data, then possible rubbish we don't care about. But + * the kernel bss must be claimed (it will be zero'd by the + * kernel itself) + */ + printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize); + + if (platform_ops.vmlinux_alloc) { + addr = platform_ops.vmlinux_alloc(ei.memsize); + } else { + /* + * Check if the kernel image (without bss) would overwrite the + * bootwrapper. The device tree has been moved in fdt_init() + * to an area allocated with malloc() (somewhere past _end). + */ + if ((unsigned long)_start < ei.loadsize) + fatal("Insufficient memory for kernel at address 0!" + " (_start=%p, uncompressed size=%08lx)\n\r", + _start, ei.loadsize); + + if ((unsigned long)_end < ei.memsize) + fatal("The final kernel image would overwrite the " + "device tree\n\r"); + } + + if (uncompressed_image) { + memcpy(addr, vmlinuz_addr + ei.elfoffset, ei.loadsize); + printf("0x%lx bytes of uncompressed data copied\n\r", + ei.loadsize); + goto out; + } + + /* Finally, decompress the kernel */ + printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr, + vmlinuz_addr, vmlinuz_addr+vmlinuz_size); + + len = partial_decompress(vmlinuz_addr, vmlinuz_size, + addr, ei.loadsize, ei.elfoffset); + + if (len < 0) + fatal("Decompression failed with error code %ld\n\r", len); + + if (len != ei.loadsize) + fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r", + len, ei.loadsize); + + printf("Done! Decompressed 0x%lx bytes\n\r", len); +out: + flush_cache(addr, ei.loadsize); + + return (struct addr_range){addr, ei.memsize}; +} + +static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen, + unsigned long initrd_addr, + unsigned long initrd_size) +{ + /* If we have an image attached to us, it overrides anything + * supplied by the loader. */ + if (&_initrd_end > &_initrd_start) { + printf("Attached initrd image at 0x%p-0x%p\n\r", + _initrd_start, _initrd_end); + initrd_addr = (unsigned long)_initrd_start; + initrd_size = _initrd_end - _initrd_start; + } else if (initrd_size > 0) { + printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r", + initrd_addr, initrd_addr + initrd_size); + } + + /* If there's no initrd at all, we're done */ + if (! initrd_size) + return (struct addr_range){0, 0}; + + /* + * If the initrd is too low it will be clobbered when the + * kernel relocates to its final location. In this case, + * allocate a safer place and move it. + */ + if (initrd_addr < vmlinux.size) { + void *old_addr = (void *)initrd_addr; + + printf("Allocating 0x%lx bytes for initrd ...\n\r", + initrd_size); + initrd_addr = (unsigned long)malloc(initrd_size); + if (! initrd_addr) + fatal("Can't allocate memory for initial " + "ramdisk !\n\r"); + printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r", + initrd_addr, old_addr, initrd_size); + memmove((void *)initrd_addr, old_addr, initrd_size); + } + + printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr)); + + /* Tell the kernel initrd address via device tree */ + setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr)); + setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size)); + + return (struct addr_range){(void *)initrd_addr, initrd_size}; +} + +#ifdef __powerpc64__ +static void prep_esm_blob(struct addr_range vmlinux, void *chosen) +{ + unsigned long esm_blob_addr, esm_blob_size; + + /* Do we have an ESM (Enter Secure Mode) blob? */ + if (&_esm_blob_end <= &_esm_blob_start) + return; + + printf("Attached ESM blob at 0x%p-0x%p\n\r", + _esm_blob_start, _esm_blob_end); + esm_blob_addr = (unsigned long)_esm_blob_start; + esm_blob_size = _esm_blob_end - _esm_blob_start; + + /* + * If the ESM blob is too low it will be clobbered when the + * kernel relocates to its final location. In this case, + * allocate a safer place and move it. + */ + if (esm_blob_addr < vmlinux.size) { + void *old_addr = (void *)esm_blob_addr; + + printf("Allocating 0x%lx bytes for esm_blob ...\n\r", + esm_blob_size); + esm_blob_addr = (unsigned long)malloc(esm_blob_size); + if (!esm_blob_addr) + fatal("Can't allocate memory for ESM blob !\n\r"); + printf("Relocating ESM blob 0x%lx <- 0x%p (0x%lx bytes)\n\r", + esm_blob_addr, old_addr, esm_blob_size); + memmove((void *)esm_blob_addr, old_addr, esm_blob_size); + } + + /* Tell the kernel ESM blob address via device tree. */ + setprop_val(chosen, "linux,esm-blob-start", (u32)(esm_blob_addr)); + setprop_val(chosen, "linux,esm-blob-end", (u32)(esm_blob_addr + esm_blob_size)); +} +#else +static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { } +#endif + +/* A buffer that may be edited by tools operating on a zImage binary so as to + * edit the command line passed to vmlinux (by setting /chosen/bootargs). + * The buffer is put in its own section so that tools may locate it easier. + */ +static char cmdline[BOOT_COMMAND_LINE_SIZE] + __attribute__((__section__("__builtin_cmdline"))); + +static void prep_cmdline(void *chosen) +{ + unsigned int getline_timeout = 5000; + int v; + int n; + + /* Wait-for-input time */ + n = getprop(chosen, "linux,cmdline-timeout", &v, sizeof(v)); + if (n == sizeof(v)) + getline_timeout = v; + + if (cmdline[0] == '\0') + getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1); + + printf("\n\rLinux/PowerPC load: %s", cmdline); + + /* If possible, edit the command line */ + if (console_ops.edit_cmdline && getline_timeout) + console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE, getline_timeout); + + printf("\n\r"); + + /* Put the command line back into the devtree for the kernel */ + setprop_str(chosen, "bootargs", cmdline); +} + +struct platform_ops platform_ops; +struct dt_ops dt_ops; +struct console_ops console_ops; +struct loader_info loader_info; + +void start(void) +{ + struct addr_range vmlinux, initrd; + kernel_entry_t kentry; + unsigned long ft_addr = 0; + void *chosen; + + /* Do this first, because malloc() could clobber the loader's + * command line. Only use the loader command line if a + * built-in command line wasn't set by an external tool */ + if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0')) + memmove(cmdline, loader_info.cmdline, + min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1)); + + if (console_ops.open && (console_ops.open() < 0)) + exit(); + if (platform_ops.fixups) + platform_ops.fixups(); + + printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", + _start, get_sp()); + + /* Ensure that the device tree has a /chosen node */ + chosen = finddevice("/chosen"); + if (!chosen) + chosen = create_node(NULL, "chosen"); + + vmlinux = prep_kernel(); + initrd = prep_initrd(vmlinux, chosen, + loader_info.initrd_addr, loader_info.initrd_size); + prep_esm_blob(vmlinux, chosen); + prep_cmdline(chosen); + + printf("Finalizing device tree..."); + if (dt_ops.finalize) + ft_addr = dt_ops.finalize(); + if (ft_addr) + printf(" flat tree at 0x%lx\n\r", ft_addr); + else + printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr); + + if (console_ops.close) + console_ops.close(); + + kentry = (kernel_entry_t) vmlinux.addr; + if (ft_addr) { + if(platform_ops.kentry) + platform_ops.kentry(ft_addr, vmlinux.addr); + else + kentry(ft_addr, 0, NULL); + } + else + kentry((unsigned long)initrd.addr, initrd.size, + loader_info.promptr); + + /* console closed so printf in fatal below may not work */ + fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r"); +} diff --git a/arch/powerpc/boot/microwatt.c b/arch/powerpc/boot/microwatt.c new file mode 100644 index 000000000..ca9d83617 --- /dev/null +++ b/arch/powerpc/boot/microwatt.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +BSS_STACK(8192); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + unsigned long heapsize = 16*1024*1024 - (unsigned long)_end; + + /* + * Disable interrupts and turn off MSR_RI, since we'll + * shortly be overwriting the interrupt vectors. + */ + __asm__ volatile("mtmsrd %0,1" : : "r" (0)); + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c new file mode 100644 index 000000000..dc603f3c1 --- /dev/null +++ b/arch/powerpc/boot/mktree.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Makes a tree bootable image for IBM Evaluation boards. + * Basically, just take a zImage, skip the ELF header, and stuff + * a 32 byte header on the front. + * + * We use htonl, which is a network macro, to make sure we're doing + * The Right Thing on an LE machine. It's non-obvious, but it should + * work on anything BSD'ish. + */ + +#include +#include +#include +#include +#include +#include +#include +#ifdef __sun__ +#include +#else +#include +#endif + +/* This gets tacked on the front of the image. There are also a few + * bytes allocated after the _start label used by the boot rom (see + * head.S for details). + */ +typedef struct boot_block { + uint32_t bb_magic; /* 0x0052504F */ + uint32_t bb_dest; /* Target address of the image */ + uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */ + uint32_t bb_debug_flag; /* Run debugger or image after load */ + uint32_t bb_entry_point; /* The image address to start */ + uint32_t bb_checksum; /* 32 bit checksum including header */ + uint32_t reserved[2]; +} boot_block_t; + +#define IMGBLK 512 +unsigned int tmpbuf[IMGBLK / sizeof(unsigned int)]; + +int main(int argc, char *argv[]) +{ + int in_fd, out_fd; + int nblks, i; + unsigned int cksum, *cp; + struct stat st; + boot_block_t bt; + + if (argc < 5) { + fprintf(stderr, "usage: %s \n",argv[0]); + exit(1); + } + + if (stat(argv[1], &st) < 0) { + perror("stat"); + exit(2); + } + + nblks = (st.st_size + IMGBLK) / IMGBLK; + + bt.bb_magic = htonl(0x0052504F); + + /* If we have the optional entry point parameter, use it */ + bt.bb_dest = htonl(strtoul(argv[3], NULL, 0)); + bt.bb_entry_point = htonl(strtoul(argv[4], NULL, 0)); + + /* We know these from the linker command. + * ...and then move it up into memory a little more so the + * relocation can happen. + */ + bt.bb_num_512blocks = htonl(nblks); + bt.bb_debug_flag = 0; + + bt.bb_checksum = 0; + + /* To be neat and tidy :-). + */ + bt.reserved[0] = 0; + bt.reserved[1] = 0; + + if ((in_fd = open(argv[1], O_RDONLY)) < 0) { + perror("zImage open"); + exit(3); + } + + if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) { + perror("bootfile open"); + exit(3); + } + + cksum = 0; + cp = (void *)&bt; + for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++) + cksum += *cp++; + + /* Assume zImage is an ELF file, and skip the 64K header. + */ + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { + fprintf(stderr, "%s is too small to be an ELF image\n", + argv[1]); + exit(4); + } + + if (tmpbuf[0] != htonl(0x7f454c46)) { + fprintf(stderr, "%s is not an ELF image\n", argv[1]); + exit(4); + } + + if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) { + fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]); + exit(4); + } + + nblks -= (64 * 1024) / IMGBLK; + + /* And away we go...... + */ + if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) { + perror("boot-image write"); + exit(5); + } + + while (nblks-- > 0) { + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) { + perror("zImage read"); + exit(5); + } + cp = tmpbuf; + for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++) + cksum += *cp++; + if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { + perror("boot-image write"); + exit(5); + } + } + + /* rewrite the header with the computed checksum. + */ + bt.bb_checksum = htonl(cksum); + if (lseek(out_fd, 0, SEEK_SET) < 0) { + perror("rewrite seek"); + exit(1); + } + if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) { + perror("boot-image rewrite"); + exit(1); + } + + exit(0); +} diff --git a/arch/powerpc/boot/motload-head.S b/arch/powerpc/boot/motload-head.S new file mode 100644 index 000000000..826dad0c1 --- /dev/null +++ b/arch/powerpc/boot/motload-head.S @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include "ppc_asm.h" + + .text + .globl _zimage_start +_zimage_start: + mfmsr r10 + rlwinm r10,r10,0,~(1<<15) /* Clear MSR_EE */ + sync + mtmsr r10 + isync + b _zimage_start_lib diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c new file mode 100644 index 000000000..c2c08633e --- /dev/null +++ b/arch/powerpc/boot/mpc52xx-psc.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MPC5200 PSC serial console support. + * + * Author: Grant Likely + * + * Copyright (c) 2007 Secret Lab Technologies Ltd. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR 0x04 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 + +#define MPC52xx_PSC_BUFFER 0x0C + +static void *psc; + +static int psc_open(void) +{ + /* Assume the firmware has already configured the PSC into + * uart mode */ + return 0; +} + +static void psc_putc(unsigned char c) +{ + while (!(in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_TXRDY)) ; + out_8(psc + MPC52xx_PSC_BUFFER, c); +} + +static unsigned char psc_tstc(void) +{ + return (in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_RXRDY) != 0; +} + +static unsigned char psc_getc(void) +{ + while (!(in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_RXRDY)) ; + return in_8(psc + MPC52xx_PSC_BUFFER); +} + +int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp) +{ + /* Get the base address of the psc registers */ + if (dt_get_virtual_reg(devp, &psc, 1) < 1) + return -1; + + scdp->open = psc_open; + scdp->putc = psc_putc; + scdp->getc = psc_getc; + scdp->tstc = psc_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/mpc8xx.c b/arch/powerpc/boot/mpc8xx.c new file mode 100644 index 000000000..e19ef64df --- /dev/null +++ b/arch/powerpc/boot/mpc8xx.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MPC8xx support functions + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "mpc8xx.h" +#include "stdio.h" +#include "io.h" + +#define MPC8XX_PLPRCR (0x284/4) /* PLL and Reset Control Register */ + +/* Return system clock from crystal frequency */ +u32 mpc885_get_clock(u32 crystal) +{ + u32 *immr; + u32 plprcr; + int mfi, mfn, mfd, pdf; + u32 ret; + + immr = fsl_get_immr(); + if (!immr) { + printf("mpc885_get_clock: Couldn't get IMMR base.\r\n"); + return 0; + } + + plprcr = in_be32(&immr[MPC8XX_PLPRCR]); + + mfi = (plprcr >> 16) & 15; + if (mfi < 5) { + printf("Warning: PLPRCR[MFI] value of %d out-of-bounds\r\n", + mfi); + mfi = 5; + } + + pdf = (plprcr >> 1) & 0xf; + mfd = (plprcr >> 22) & 0x1f; + mfn = (plprcr >> 27) & 0x1f; + + ret = crystal * mfi; + + if (mfn != 0) + ret += crystal * mfn / (mfd + 1); + + return ret / (pdf + 1); +} + +/* Set common device tree fields based on the given clock frequencies. */ +void mpc8xx_set_clocks(u32 sysclk) +{ + void *node; + + dt_fixup_cpu_clocks(sysclk, sysclk / 16, sysclk); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &sysclk, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &sysclk, 4); +} + +int mpc885_fixup_clocks(u32 crystal) +{ + u32 sysclk = mpc885_get_clock(crystal); + if (!sysclk) + return 0; + + mpc8xx_set_clocks(sysclk); + return 1; +} diff --git a/arch/powerpc/boot/mpc8xx.h b/arch/powerpc/boot/mpc8xx.h new file mode 100644 index 000000000..3852ed900 --- /dev/null +++ b/arch/powerpc/boot/mpc8xx.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_MPC8xx_H_ +#define _PPC_BOOT_MPC8xx_H_ + +#include "types.h" + +void mpc8xx_set_clocks(u32 sysclk); + +u32 mpc885_get_clock(u32 crystal); +int mpc885_fixup_clocks(u32 crystal); + +#endif diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c new file mode 100644 index 000000000..51453d0ec --- /dev/null +++ b/arch/powerpc/boot/mvme5100.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Motorola/Emerson MVME5100 with PPCBug firmware. + * + * Author: Stephen Chivers + * + * Copyright 2013 CSC Australia Pty. Ltd. + */ +#include "types.h" +#include "ops.h" +#include "io.h" + +BSS_STACK(4096); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize; + + heapsize = 0x8000000 - (u32)_end; /* 128M */ + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/mvme7100.c b/arch/powerpc/boot/mvme7100.c new file mode 100644 index 000000000..1e218454a --- /dev/null +++ b/arch/powerpc/boot/mvme7100.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Motload compatibility for the Emerson/Artesyn MVME7100 + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + * + * Author: Alessio Igor Bogani + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_86xx +#define TARGET_HAS_ETH1 +#define TARGET_HAS_ETH2 +#define TARGET_HAS_ETH3 +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(16384); + +static void mvme7100_fixups(void) +{ + void *devp; + unsigned long busfreq = bd.bi_busfreq * 1000000; + + dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq); + + devp = finddevice("/soc@f1000000"); + if (devp) + setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq)); + + devp = finddevice("/soc/serial@4500"); + if (devp) + setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq)); + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); + dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = mvme7100_fixups; +} diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c new file mode 100644 index 000000000..f16d2be1d --- /dev/null +++ b/arch/powerpc/boot/ns16550.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * 16550 serial console support. + * + * Original copied from + * (which had no copyright) + * Modifications: 2006 (c) MontaVista Software, Inc. + * + * Modified by: Mark A. Greer + */ +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" +#include "of.h" + +#define UART_DLL 0 /* Out: Divisor Latch Low */ +#define UART_DLM 1 /* Out: Divisor Latch High */ +#define UART_FCR 2 /* Out: FIFO Control Register */ +#define UART_LCR 3 /* Out: Line Control Register */ +#define UART_MCR 4 /* Out: Modem Control Register */ +#define UART_LSR 5 /* In: Line Status Register */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ +#define UART_MSR 6 /* In: Modem Status Register */ +#define UART_SCR 7 /* I/O: Scratch Register */ + +static unsigned char *reg_base; +static u32 reg_shift; + +static int ns16550_open(void) +{ + out_8(reg_base + (UART_FCR << reg_shift), 0x06); + return 0; +} + +static void ns16550_putc(unsigned char c) +{ + while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_THRE) == 0); + out_8(reg_base, c); +} + +static unsigned char ns16550_getc(void) +{ + while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) == 0); + return in_8(reg_base); +} + +static u8 ns16550_tstc(void) +{ + return ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) != 0); +} + +int ns16550_console_init(void *devp, struct serial_console_data *scdp) +{ + int n; + u32 reg_offset; + + if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) { + printf("virt reg parse fail...\r\n"); + return -1; + } + + n = getprop(devp, "reg-offset", ®_offset, sizeof(reg_offset)); + if (n == sizeof(reg_offset)) + reg_base += be32_to_cpu(reg_offset); + + n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); + if (n != sizeof(reg_shift)) + reg_shift = 0; + else + reg_shift = be32_to_cpu(reg_shift); + + scdp->open = ns16550_open; + scdp->putc = ns16550_putc; + scdp->getc = ns16550_getc; + scdp->tstc = ns16550_tstc; + scdp->close = NULL; + + return 0; +} diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c new file mode 100644 index 000000000..2fbd4ae60 --- /dev/null +++ b/arch/powerpc/boot/of.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" + +#include "of.h" + +/* Value picked to match that used by yaboot */ +#define PROG_START 0x01400000 /* only used on 64-bit systems */ +#define RAM_END (512<<20) /* Fixme: use OF */ +#define ONE_MB 0x100000 + + + +static unsigned long claim_base; + +void epapr_platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7); + +static void *of_try_claim(unsigned long size) +{ + unsigned long addr = 0; + + if (claim_base == 0) + claim_base = _ALIGN_UP((unsigned long)_end, ONE_MB); + + for(; claim_base < RAM_END; claim_base += ONE_MB) { +#ifdef DEBUG + printf(" trying: 0x%08lx\n\r", claim_base); +#endif + addr = (unsigned long) of_claim(claim_base, size, 0); + if (addr != PROM_ERROR) + break; + } + if (addr == 0) + return NULL; + claim_base = PAGE_ALIGN(claim_base + size); + return (void *)addr; +} + +static void of_image_hdr(const void *hdr) +{ + const Elf64_Ehdr *elf64 = hdr; + + if (elf64->e_ident[EI_CLASS] == ELFCLASS64) { + /* + * Maintain a "magic" minimum address. This keeps some older + * firmware platforms running. + */ + if (claim_base < PROG_START) + claim_base = PROG_START; + } +} + +static void of_platform_init(unsigned long a1, unsigned long a2, void *promptr) +{ + platform_ops.image_hdr = of_image_hdr; + platform_ops.malloc = of_try_claim; + platform_ops.exit = of_exit; + platform_ops.vmlinux_alloc = of_vmlinux_alloc; + + dt_ops.finddevice = of_finddevice; + dt_ops.getprop = of_getprop; + dt_ops.setprop = of_setprop; + + of_console_init(); + + of_init(promptr); + loader_info.promptr = promptr; + if (a1 && a2 && a2 != 0xdeadbeef) { + loader_info.initrd_addr = a1; + loader_info.initrd_size = a2; + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* Detect OF vs. ePAPR boot */ + if (r5) + of_platform_init(r3, r4, (void *)r5); + else + epapr_platform_init(r3, r4, r5, r6, r7); +} + diff --git a/arch/powerpc/boot/of.h b/arch/powerpc/boot/of.h new file mode 100644 index 000000000..31b2f5dfd --- /dev/null +++ b/arch/powerpc/boot/of.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_OF_H_ +#define _PPC_BOOT_OF_H_ + +#include "swab.h" + +typedef void *phandle; +typedef u32 ihandle; + +void of_init(void *promptr); +int of_call_prom(const char *service, int nargs, int nret, ...); +unsigned int of_claim(unsigned long virt, unsigned long size, + unsigned long align); +void *of_vmlinux_alloc(unsigned long size); +void of_exit(void); +void *of_finddevice(const char *name); +int of_getprop(const void *phandle, const char *name, void *buf, + const int buflen); +int of_setprop(const void *phandle, const char *name, const void *buf, + const int buflen); + +/* Console functions */ +void of_console_init(void); + +typedef u16 __be16; +typedef u32 __be32; +typedef u64 __be64; + +#ifdef __LITTLE_ENDIAN__ +#define cpu_to_be16(x) swab16(x) +#define be16_to_cpu(x) swab16(x) +#define cpu_to_be32(x) swab32(x) +#define be32_to_cpu(x) swab32(x) +#define cpu_to_be64(x) swab64(x) +#define be64_to_cpu(x) swab64(x) +#else +#define cpu_to_be16(x) (x) +#define be16_to_cpu(x) (x) +#define cpu_to_be32(x) (x) +#define be32_to_cpu(x) (x) +#define cpu_to_be64(x) (x) +#define be64_to_cpu(x) (x) +#endif + +#define PROM_ERROR (-1u) + +#endif /* _PPC_BOOT_OF_H_ */ diff --git a/arch/powerpc/boot/ofconsole.c b/arch/powerpc/boot/ofconsole.c new file mode 100644 index 000000000..8eb0f1c45 --- /dev/null +++ b/arch/powerpc/boot/ofconsole.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OF console routines + * + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" + +#include "of.h" + +static unsigned int of_stdout_handle; + +static int of_console_open(void) +{ + void *devp; + + if (((devp = of_finddevice("/chosen")) != NULL) + && (of_getprop(devp, "stdout", &of_stdout_handle, + sizeof(of_stdout_handle)) + == sizeof(of_stdout_handle))) { + of_stdout_handle = be32_to_cpu(of_stdout_handle); + return 0; + } + + return -1; +} + +static void of_console_write(const char *buf, int len) +{ + of_call_prom("write", 3, 1, of_stdout_handle, buf, len); +} + +void of_console_init(void) +{ + console_ops.open = of_console_open; + console_ops.write = of_console_write; +} diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c new file mode 100644 index 000000000..8759c985e --- /dev/null +++ b/arch/powerpc/boot/oflib.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" + +#include "of.h" + +typedef u32 prom_arg_t; + +/* The following structure is used to communicate with open firmware. + * All arguments in and out are in big endian format. */ +struct prom_args { + __be32 service; /* Address of service name string. */ + __be32 nargs; /* Number of input arguments. */ + __be32 nret; /* Number of output arguments. */ + __be32 args[10]; /* Input/output arguments. */ +}; + +#ifdef __powerpc64__ +extern int prom(void *); +#else +static int (*prom) (void *); +#endif + +void of_init(void *promptr) +{ +#ifndef __powerpc64__ + prom = (int (*)(void *))promptr; +#endif +} + +#define ADDR(x) (u32)(unsigned long)(x) + +int of_call_prom(const char *service, int nargs, int nret, ...) +{ + int i; + struct prom_args args; + va_list list; + + args.service = cpu_to_be32(ADDR(service)); + args.nargs = cpu_to_be32(nargs); + args.nret = cpu_to_be32(nret); + + va_start(list, nret); + for (i = 0; i < nargs; i++) + args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (prom(&args) < 0) + return PROM_ERROR; + + return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; +} + +static int of_call_prom_ret(const char *service, int nargs, int nret, + prom_arg_t *rets, ...) +{ + int i; + struct prom_args args; + va_list list; + + args.service = cpu_to_be32(ADDR(service)); + args.nargs = cpu_to_be32(nargs); + args.nret = cpu_to_be32(nret); + + va_start(list, rets); + for (i = 0; i < nargs; i++) + args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (prom(&args) < 0) + return PROM_ERROR; + + if (rets != NULL) + for (i = 1; i < nret; ++i) + rets[i-1] = be32_to_cpu(args.args[nargs+i]); + + return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; +} + +/* returns true if s2 is a prefix of s1 */ +static int string_match(const char *s1, const char *s2) +{ + for (; *s2; ++s2) + if (*s1++ != *s2) + return 0; + return 1; +} + +/* + * Older OF's require that when claiming a specific range of addresses, + * we claim the physical space in the /memory node and the virtual + * space in the chosen mmu node, and then do a map operation to + * map virtual to physical. + */ +static int need_map = -1; +static ihandle chosen_mmu; +static ihandle memory; + +static int check_of_version(void) +{ + phandle oprom, chosen; + char version[64]; + + oprom = of_finddevice("/openprom"); + if (oprom == (phandle) -1) + return 0; + if (of_getprop(oprom, "model", version, sizeof(version)) <= 0) + return 0; + version[sizeof(version)-1] = 0; + printf("OF version = '%s'\r\n", version); + if (!string_match(version, "Open Firmware, 1.") + && !string_match(version, "FirmWorks,3.")) + return 0; + chosen = of_finddevice("/chosen"); + if (chosen == (phandle) -1) { + chosen = of_finddevice("/chosen@0"); + if (chosen == (phandle) -1) { + printf("no chosen\n"); + return 0; + } + } + if (of_getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) { + printf("no mmu\n"); + return 0; + } + memory = of_call_prom("open", 1, 1, "/memory"); + if (memory == PROM_ERROR) { + memory = of_call_prom("open", 1, 1, "/memory@0"); + if (memory == PROM_ERROR) { + printf("no memory node\n"); + return 0; + } + } + printf("old OF detected\r\n"); + return 1; +} + +unsigned int of_claim(unsigned long virt, unsigned long size, + unsigned long align) +{ + int ret; + prom_arg_t result; + + if (need_map < 0) + need_map = check_of_version(); + if (align || !need_map) + return of_call_prom("claim", 3, 1, virt, size, align); + + ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", memory, + align, size, virt); + if (ret != 0 || result == -1) + return -1; + ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, + align, size, virt); + /* 0x12 == coherent + read/write */ + ret = of_call_prom("call-method", 6, 1, "map", chosen_mmu, + 0x12, size, virt, virt); + return virt; +} + +void *of_vmlinux_alloc(unsigned long size) +{ + unsigned long start = (unsigned long)_start, end = (unsigned long)_end; + unsigned long addr; + void *p; + + /* With some older POWER4 firmware we need to claim the area the kernel + * will reside in. Newer firmwares don't need this so we just ignore + * the return value. + */ + addr = (unsigned long) of_claim(start, end - start, 0); + printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %lx\r\n", + start, end, end - start, addr); + + p = malloc(size); + if (!p) + fatal("Can't allocate memory for kernel image!\n\r"); + + return p; +} + +void of_exit(void) +{ + of_call_prom("exit", 0, 0); +} + +/* + * OF device tree routines + */ +void *of_finddevice(const char *name) +{ + return (void *) (unsigned long) of_call_prom("finddevice", 1, 1, name); +} + +int of_getprop(const void *phandle, const char *name, void *buf, + const int buflen) +{ + return of_call_prom("getprop", 4, 1, phandle, name, buf, buflen); +} + +int of_setprop(const void *phandle, const char *name, const void *buf, + const int buflen) +{ + return of_call_prom("setprop", 4, 1, phandle, name, buf, buflen); +} diff --git a/arch/powerpc/boot/opal-calls.S b/arch/powerpc/boot/opal-calls.S new file mode 100644 index 000000000..1f2f330a4 --- /dev/null +++ b/arch/powerpc/boot/opal-calls.S @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 IBM Corporation. + */ + +#include "ppc_asm.h" +#include "../include/asm/opal-api.h" + + .text + + .globl opal_kentry +opal_kentry: + /* r3 is the fdt ptr */ + mtctr r4 + li r4, 0 + li r5, 0 + li r6, 0 + li r7, 0 + LOAD_REG_ADDR(r11, opal) + ld r8,0(r11) + ld r9,8(r11) + bctr + +#define OPAL_CALL(name, token) \ + .globl name; \ +name: \ + li r0, token; \ + b opal_call; + +opal_call: + mflr r11 + std r11,16(r1) + mfcr r12 + stw r12,8(r1) + mr r13,r2 + + /* Set opal return address */ + LOAD_REG_ADDR(r11, opal_return) + mtlr r11 + mfmsr r12 + + /* switch to BE when we enter OPAL */ + li r11,MSR_LE + andc r12,r12,r11 + mtspr SPRN_HSRR1,r12 + + /* load the opal call entry point and base */ + LOAD_REG_ADDR(r11, opal) + ld r12,8(r11) + ld r2,0(r11) + mtspr SPRN_HSRR0,r12 + hrfid + +opal_return: + FIXUP_ENDIAN + mr r2,r13; + lwz r11,8(r1); + ld r12,16(r1) + mtcr r11; + mtlr r12 + blr + +OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE); +OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ); +OPAL_CALL(opal_console_write_buffer_space, OPAL_CONSOLE_WRITE_BUFFER_SPACE); +OPAL_CALL(opal_poll_events, OPAL_POLL_EVENTS); +OPAL_CALL(opal_console_flush, OPAL_CONSOLE_FLUSH); diff --git a/arch/powerpc/boot/opal.c b/arch/powerpc/boot/opal.c new file mode 100644 index 000000000..b69818ce5 --- /dev/null +++ b/arch/powerpc/boot/opal.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 IBM Corporation. + */ + +#include "ops.h" +#include "stdio.h" +#include "io.h" +#include +#include "../include/asm/opal-api.h" + +/* Global OPAL struct used by opal-call.S */ +struct opal { + u64 base; + u64 entry; +} opal; + +static u32 opal_con_id; + +/* see opal-wrappers.S */ +int64_t opal_console_write(int64_t term_number, u64 *length, const u8 *buffer); +int64_t opal_console_read(int64_t term_number, uint64_t *length, u8 *buffer); +int64_t opal_console_write_buffer_space(uint64_t term_number, uint64_t *length); +int64_t opal_console_flush(uint64_t term_number); +int64_t opal_poll_events(uint64_t *outstanding_event_mask); + +void opal_kentry(unsigned long fdt_addr, void *vmlinux_addr); + +static int opal_con_open(void) +{ + /* + * When OPAL loads the boot kernel it stashes the OPAL base and entry + * address in r8 and r9 so the kernel can use the OPAL console + * before unflattening the devicetree. While executing the wrapper will + * probably trash r8 and r9 so this kentry hook restores them before + * entering the decompressed kernel. + */ + platform_ops.kentry = opal_kentry; + return 0; +} + +static void opal_con_putc(unsigned char c) +{ + int64_t rc; + uint64_t olen, len; + + do { + rc = opal_console_write_buffer_space(opal_con_id, &olen); + len = be64_to_cpu(olen); + if (rc) + return; + opal_poll_events(NULL); + } while (len < 1); + + + olen = cpu_to_be64(1); + opal_console_write(opal_con_id, &olen, &c); +} + +static void opal_con_close(void) +{ + opal_console_flush(opal_con_id); +} + +static void opal_init(void) +{ + void *opal_node; + + opal_node = finddevice("/ibm,opal"); + if (!opal_node) + return; + if (getprop(opal_node, "opal-base-address", &opal.base, sizeof(u64)) < 0) + return; + opal.base = be64_to_cpu(opal.base); + if (getprop(opal_node, "opal-entry-address", &opal.entry, sizeof(u64)) < 0) + return; + opal.entry = be64_to_cpu(opal.entry); +} + +int opal_console_init(void *devp, struct serial_console_data *scdp) +{ + opal_init(); + + if (devp) { + int n = getprop(devp, "reg", &opal_con_id, sizeof(u32)); + if (n != sizeof(u32)) + return -1; + opal_con_id = be32_to_cpu(opal_con_id); + } else + opal_con_id = 0; + + scdp->open = opal_con_open; + scdp->putc = opal_con_putc; + scdp->close = opal_con_close; + + return 0; +} diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h new file mode 100644 index 000000000..a40c2162a --- /dev/null +++ b/arch/powerpc/boot/ops.h @@ -0,0 +1,259 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Global definition of all the bootwrapper operations. + * + * Author: Mark A. Greer + * + * 2006 (c) MontaVista Software, Inc. + */ +#ifndef _PPC_BOOT_OPS_H_ +#define _PPC_BOOT_OPS_H_ + +#include +#include "types.h" +#include "string.h" + +#define BOOT_COMMAND_LINE_SIZE 2048 +#define MAX_PATH_LEN 256 +#define MAX_PROP_LEN 256 /* What should this be? */ + +typedef void (*kernel_entry_t)(unsigned long r3, unsigned long r4, void *r5); + +/* Platform specific operations */ +struct platform_ops { + void (*fixups)(void); + void (*image_hdr)(const void *); + void * (*malloc)(unsigned long size); + void (*free)(void *ptr); + void * (*realloc)(void *ptr, unsigned long size); + void (*exit)(void); + void * (*vmlinux_alloc)(unsigned long size); + void (*kentry)(unsigned long fdt_addr, void *vmlinux_addr); +}; +extern struct platform_ops platform_ops; + +/* Device Tree operations */ +struct dt_ops { + void * (*finddevice)(const char *name); + int (*getprop)(const void *phandle, const char *name, void *buf, + const int buflen); + int (*setprop)(const void *phandle, const char *name, + const void *buf, const int buflen); + int (*del_node)(const void *phandle); + void *(*get_parent)(const void *phandle); + /* The node must not already exist. */ + void *(*create_node)(const void *parent, const char *name); + void *(*find_node_by_prop_value)(const void *prev, + const char *propname, + const char *propval, int proplen); + void *(*find_node_by_compatible)(const void *prev, + const char *compat); + unsigned long (*finalize)(void); + char *(*get_path)(const void *phandle, char *buf, int len); +}; +extern struct dt_ops dt_ops; + +/* Console operations */ +struct console_ops { + int (*open)(void); + void (*write)(const char *buf, int len); + void (*edit_cmdline)(char *buf, int len, unsigned int getline_timeout); + void (*close)(void); + void *data; +}; +extern struct console_ops console_ops; + +/* Serial console operations */ +struct serial_console_data { + int (*open)(void); + void (*putc)(unsigned char c); + unsigned char (*getc)(void); + u8 (*tstc)(void); + void (*close)(void); +}; + +struct loader_info { + void *promptr; + unsigned long initrd_addr, initrd_size; + char *cmdline; + int cmdline_len; +}; +extern struct loader_info loader_info; + +void start(void); +void fdt_init(void *blob); +int serial_console_init(void); +int ns16550_console_init(void *devp, struct serial_console_data *scdp); +int cpm_console_init(void *devp, struct serial_console_data *scdp); +int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp); +int opal_console_init(void *devp, struct serial_console_data *scdp); +void *simple_alloc_init(char *base, unsigned long heap_size, + unsigned long granularity, unsigned long max_allocs); +extern void flush_cache(void *, unsigned long); +int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); +int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); +int dt_is_compatible(void *node, const char *compat); +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); +int dt_get_virtual_reg(void *node, void **addr, int nres); + +static inline void *finddevice(const char *name) +{ + return (dt_ops.finddevice) ? dt_ops.finddevice(name) : NULL; +} + +static inline int getprop(void *devp, const char *name, void *buf, int buflen) +{ + return (dt_ops.getprop) ? dt_ops.getprop(devp, name, buf, buflen) : -1; +} + +static inline int setprop(void *devp, const char *name, + const void *buf, int buflen) +{ + return (dt_ops.setprop) ? dt_ops.setprop(devp, name, buf, buflen) : -1; +} +#define setprop_val(devp, name, val) \ + do { \ + typeof(val) x = (val); \ + setprop((devp), (name), &x, sizeof(x)); \ + } while (0) + +static inline int setprop_str(void *devp, const char *name, const char *buf) +{ + if (dt_ops.setprop) + return dt_ops.setprop(devp, name, buf, strlen(buf) + 1); + + return -1; +} + +static inline int del_node(const void *devp) +{ + return dt_ops.del_node ? dt_ops.del_node(devp) : -1; +} + +static inline void *get_parent(const char *devp) +{ + return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL; +} + +static inline void *create_node(const void *parent, const char *name) +{ + return dt_ops.create_node ? dt_ops.create_node(parent, name) : NULL; +} + + +static inline void *find_node_by_prop_value(const void *prev, + const char *propname, + const char *propval, int proplen) +{ + if (dt_ops.find_node_by_prop_value) + return dt_ops.find_node_by_prop_value(prev, propname, + propval, proplen); + + return NULL; +} + +static inline void *find_node_by_prop_value_str(const void *prev, + const char *propname, + const char *propval) +{ + return find_node_by_prop_value(prev, propname, propval, + strlen(propval) + 1); +} + +static inline void *find_node_by_devtype(const void *prev, + const char *type) +{ + return find_node_by_prop_value_str(prev, "device_type", type); +} + +static inline void *find_node_by_alias(const char *alias) +{ + void *devp = finddevice("/aliases"); + + if (devp) { + char path[MAX_PATH_LEN]; + if (getprop(devp, alias, path, MAX_PATH_LEN) > 0) + return finddevice(path); + } + + return NULL; +} + +static inline void *find_node_by_compatible(const void *prev, + const char *compat) +{ + if (dt_ops.find_node_by_compatible) + return dt_ops.find_node_by_compatible(prev, compat); + + return NULL; +} + +void dt_fixup_memory(u64 start, u64 size); +void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq); +void dt_fixup_clock(const char *path, u32 freq); +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr); +void dt_fixup_mac_address(u32 index, const u8 *addr); +void __dt_fixup_mac_addresses(u32 startindex, ...); +#define dt_fixup_mac_addresses(...) \ + __dt_fixup_mac_addresses(0, __VA_ARGS__, NULL) + + +static inline char *get_path(const void *phandle, char *buf, int len) +{ + if (dt_ops.get_path) + return dt_ops.get_path(phandle, buf, len); + + return NULL; +} + +static inline void *malloc(unsigned long size) +{ + return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL; +} + +static inline void free(void *ptr) +{ + if (platform_ops.free) + platform_ops.free(ptr); +} + +static inline void exit(void) +{ + if (platform_ops.exit) + platform_ops.exit(); + for(;;); +} +#define fatal(args...) { printf(args); exit(); } + + +#define BSS_STACK(size) \ + static char _bss_stack[size]; \ + void *_platform_stack_top = _bss_stack + sizeof(_bss_stack); + +extern unsigned long timebase_period_ns; +void udelay(long delay); + +extern char _start[]; +extern char __bss_start[]; +extern char _end[]; +extern char _vmlinux_start[]; +extern char _vmlinux_end[]; +extern char _initrd_start[]; +extern char _initrd_end[]; +extern char _dtb_start[]; +extern char _dtb_end[]; +extern char _esm_blob_start[]; +extern char _esm_blob_end[]; + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + +long partial_decompress(void *inbuf, unsigned long input_size, void *outbuf, + unsigned long output_size, unsigned long skip); + +#endif /* _PPC_BOOT_OPS_H_ */ diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h new file mode 100644 index 000000000..e44a31197 --- /dev/null +++ b/arch/powerpc/boot/page.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _PPC_BOOT_PAGE_H +#define _PPC_BOOT_PAGE_H +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + */ + +#ifdef __ASSEMBLER__ +#define ASM_CONST(x) x +#else +#define __ASM_CONST(x) x##UL +#define ASM_CONST(x) __ASM_CONST(x) +#endif + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) +#define _ALIGN_DOWN(addr, size) ((addr)&(~((typeof(addr))(size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) + +#endif /* _PPC_BOOT_PAGE_H */ diff --git a/arch/powerpc/boot/planetcore.c b/arch/powerpc/boot/planetcore.c new file mode 100644 index 000000000..d5f391e34 --- /dev/null +++ b/arch/powerpc/boot/planetcore.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PlanetCore configuration data support functions + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "stdio.h" +#include "stdlib.h" +#include "ops.h" +#include "planetcore.h" +#include "io.h" + +/* PlanetCore passes information to the OS in the form of + * a table of key=value strings, separated by newlines. + * + * The list is terminated by an empty string (i.e. two + * consecutive newlines). + * + * To make it easier to parse, we first convert all the + * newlines into null bytes. + */ + +void planetcore_prepare_table(char *table) +{ + do { + if (*table == '\n') + *table = 0; + + table++; + } while (*(table - 1) || *table != '\n'); + + *table = 0; +} + +const char *planetcore_get_key(const char *table, const char *key) +{ + int keylen = strlen(key); + + do { + if (!strncmp(table, key, keylen) && table[keylen] == '=') + return table + keylen + 1; + + table += strlen(table) + 1; + } while (strlen(table) != 0); + + return NULL; +} + +int planetcore_get_decimal(const char *table, const char *key, u64 *val) +{ + const char *str = planetcore_get_key(table, key); + if (!str) + return 0; + + *val = strtoull(str, NULL, 10); + return 1; +} + +int planetcore_get_hex(const char *table, const char *key, u64 *val) +{ + const char *str = planetcore_get_key(table, key); + if (!str) + return 0; + + *val = strtoull(str, NULL, 16); + return 1; +} + +static u64 mac_table[4] = { + 0x000000000000, + 0x000000800000, + 0x000000400000, + 0x000000c00000, +}; + +void planetcore_set_mac_addrs(const char *table) +{ + u8 addr[4][6]; + u64 int_addr; + u32 i; + int j; + + if (!planetcore_get_hex(table, PLANETCORE_KEY_MAC_ADDR, &int_addr)) + return; + + for (i = 0; i < 4; i++) { + u64 this_dev_addr = (int_addr & ~0x000000c00000) | + mac_table[i]; + + for (j = 5; j >= 0; j--) { + addr[i][j] = this_dev_addr & 0xff; + this_dev_addr >>= 8; + } + + dt_fixup_mac_address(i, addr[i]); + } +} + +static char prop_buf[MAX_PROP_LEN]; + +void planetcore_set_stdout_path(const char *table) +{ + char *path; + const char *label; + void *node, *chosen; + + label = planetcore_get_key(table, PLANETCORE_KEY_SERIAL_PORT); + if (!label) + return; + + node = find_node_by_prop_value_str(NULL, "linux,planetcore-label", + label); + if (!node) + return; + + path = get_path(node, prop_buf, MAX_PROP_LEN); + if (!path) + return; + + chosen = finddevice("/chosen"); + if (!chosen) + chosen = create_node(NULL, "chosen"); + if (!chosen) + return; + + setprop_str(chosen, "linux,stdout-path", path); +} diff --git a/arch/powerpc/boot/planetcore.h b/arch/powerpc/boot/planetcore.h new file mode 100644 index 000000000..5311db06c --- /dev/null +++ b/arch/powerpc/boot/planetcore.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_PLANETCORE_H_ +#define _PPC_BOOT_PLANETCORE_H_ + +#include "types.h" + +#define PLANETCORE_KEY_BOARD_TYPE "BO" +#define PLANETCORE_KEY_BOARD_REV "BR" +#define PLANETCORE_KEY_MB_RAM "D1" +#define PLANETCORE_KEY_MAC_ADDR "EA" +#define PLANETCORE_KEY_FLASH_SPEED "FS" +#define PLANETCORE_KEY_IP_ADDR "IP" +#define PLANETCORE_KEY_KB_NVRAM "NV" +#define PLANETCORE_KEY_PROCESSOR "PR" +#define PLANETCORE_KEY_PROC_VARIANT "PV" +#define PLANETCORE_KEY_SERIAL_BAUD "SB" +#define PLANETCORE_KEY_SERIAL_PORT "SP" +#define PLANETCORE_KEY_SWITCH "SW" +#define PLANETCORE_KEY_TEMP_OFFSET "TC" +#define PLANETCORE_KEY_TARGET_IP "TIP" +#define PLANETCORE_KEY_CRYSTAL_HZ "XT" + +/* Prepare the table for processing, by turning all newlines + * into NULL bytes. + */ +void planetcore_prepare_table(char *table); + +/* Return the value associated with a given key in text, + * decimal, or hex format. + * + * Returns zero/NULL on failure, non-zero on success. + */ +const char *planetcore_get_key(const char *table, const char *key); +int planetcore_get_decimal(const char *table, const char *key, u64 *val); +int planetcore_get_hex(const char *table, const char *key, u64 *val); + +/* Updates the device tree local-mac-address properties based + * on the EA tag. + */ +void planetcore_set_mac_addrs(const char *table); + +/* Sets the linux,stdout-path in the /chosen node. This requires the + * linux,planetcore-label property in each serial node. + */ +void planetcore_set_stdout_path(const char *table); + +#endif diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h new file mode 100644 index 000000000..a66cfd76f --- /dev/null +++ b/arch/powerpc/boot/ppc_asm.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _PPC64_PPC_ASM_H +#define _PPC64_PPC_ASM_H +/* + * + * Definitions used by various bits of low-level assembly code on PowerPC. + * + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* General Purpose Registers (GPRs) */ + +#define r0 0 +#define r1 1 +#define r2 2 +#define r3 3 +#define r4 4 +#define r5 5 +#define r6 6 +#define r7 7 +#define r8 8 +#define r9 9 +#define r10 10 +#define r11 11 +#define r12 12 +#define r13 13 +#define r14 14 +#define r15 15 +#define r16 16 +#define r17 17 +#define r18 18 +#define r19 19 +#define r20 20 +#define r21 21 +#define r22 22 +#define r23 23 +#define r24 24 +#define r25 25 +#define r26 26 +#define r27 27 +#define r28 28 +#define r29 29 +#define r30 30 +#define r31 31 + +#define SPRN_TBRL 268 +#define SPRN_TBRU 269 +#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */ +#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ + +#define MSR_LE 0x0000000000000001 + +#define FIXUP_ENDIAN \ + tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ + b $+44; /* Skip trampoline if endian is good */ \ + .long 0xa600607d; /* mfmsr r11 */ \ + .long 0x01006b69; /* xori r11,r11,1 */ \ + .long 0x00004039; /* li r10,0 */ \ + .long 0x6401417d; /* mtmsrd r10,1 */ \ + .long 0x05009f42; /* bcl 20,31,$+4 */ \ + .long 0xa602487d; /* mflr r10 */ \ + .long 0x14004a39; /* addi r10,r10,20 */ \ + .long 0xa6035a7d; /* mtsrr0 r10 */ \ + .long 0xa6037b7d; /* mtsrr1 r11 */ \ + .long 0x2400004c /* rfid */ + +#ifdef CONFIG_PPC_8xx +#define MFTBL(dest) mftb dest +#define MFTBU(dest) mftbu dest +#else +#define MFTBL(dest) mfspr dest, SPRN_TBRL +#define MFTBU(dest) mfspr dest, SPRN_TBRU +#endif + +#ifdef CONFIG_PPC64_BOOT_WRAPPER +#define LOAD_REG_ADDR(reg,name) \ + addis reg,r2,name@toc@ha; \ + addi reg,reg,name@toc@l +#else +#define LOAD_REG_ADDR(reg,name) \ + lis reg,name@ha; \ + addi reg,reg,name@l +#endif + +#endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h new file mode 100644 index 000000000..90c8f452f --- /dev/null +++ b/arch/powerpc/boot/ppcboot.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) || defined(TARGET_86xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/boot/pq2.c b/arch/powerpc/boot/pq2.c new file mode 100644 index 000000000..de27f1c07 --- /dev/null +++ b/arch/powerpc/boot/pq2.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PowerQUICC II support functions + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "pq2.h" +#include "stdio.h" +#include "io.h" + +#define PQ2_SCCR (0x10c80/4) /* System Clock Configuration Register */ +#define PQ2_SCMR (0x10c88/4) /* System Clock Mode Register */ + +static int pq2_corecnf_map[] = { + 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, -1, + 6, 5, 13, 2, 14, 4, 15, 9, 0, 11, 8, 10, 16, 12, 7, -1 +}; + +/* Get various clocks from crystal frequency. + * Returns zero on failure and non-zero on success. + */ +int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, + u32 *timebase, u32 *brgfreq) +{ + u32 *immr; + u32 sccr, scmr, mainclk, busclk; + int corecnf, busdf, plldf, pllmf, dfbrg; + + immr = fsl_get_immr(); + if (!immr) { + printf("pq2_get_clocks: Couldn't get IMMR base.\r\n"); + return 0; + } + + sccr = in_be32(&immr[PQ2_SCCR]); + scmr = in_be32(&immr[PQ2_SCMR]); + + dfbrg = sccr & 3; + corecnf = (scmr >> 24) & 0x1f; + busdf = (scmr >> 20) & 0xf; + plldf = (scmr >> 12) & 1; + pllmf = scmr & 0xfff; + + mainclk = crystal * (pllmf + 1) / (plldf + 1); + busclk = mainclk / (busdf + 1); + + if (sysfreq) + *sysfreq = mainclk / 2; + if (timebase) + *timebase = busclk / 4; + if (brgfreq) + *brgfreq = mainclk / (1 << ((dfbrg + 1) * 2)); + + if (corefreq) { + int coremult = pq2_corecnf_map[corecnf]; + + if (coremult < 0) + *corefreq = mainclk / 2; + else if (coremult == 0) + return 0; + else + *corefreq = busclk * coremult / 2; + } + + return 1; +} + +/* Set common device tree fields based on the given clock frequencies. */ +void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq) +{ + void *node; + + dt_fixup_cpu_clocks(corefreq, timebase, sysfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &sysfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &brgfreq, 4); +} + +int pq2_fixup_clocks(u32 crystal) +{ + u32 sysfreq, corefreq, timebase, brgfreq; + + if (!pq2_get_clocks(crystal, &sysfreq, &corefreq, &timebase, &brgfreq)) + return 0; + + pq2_set_clocks(sysfreq, corefreq, timebase, brgfreq); + return 1; +} diff --git a/arch/powerpc/boot/pq2.h b/arch/powerpc/boot/pq2.h new file mode 100644 index 000000000..f577b3bec --- /dev/null +++ b/arch/powerpc/boot/pq2.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_PQ2_H_ +#define _PPC_BOOT_PQ2_H_ + +#include "types.h" + +int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, + u32 *timebase, u32 *brgfreq); +void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq); +int pq2_fixup_clocks(u32 crystal); + +#endif diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S new file mode 100644 index 000000000..0a4ebfcc3 --- /dev/null +++ b/arch/powerpc/boot/ps3-head.S @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 bootwrapper entry. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +#include "ppc_asm.h" + + .machine "ppc64" + + .text + +/* + * __system_reset_overlay - The PS3 first stage entry. + * + * The bootwraper build script copies the 512 bytes at symbol + * __system_reset_overlay to offset 0x100 of the rom image. This symbol + * must occupy 512 or less bytes. + * + * The PS3 has a single processor with two threads. + */ + + .globl __system_reset_overlay +__system_reset_overlay: + + /* Switch to 32-bit mode. */ + + mfmsr r9 + clrldi r9,r9,1 + mtmsrd r9 + nop + + /* Get thread number in r3 and branch. */ + + mfspr r3, 0x88 + cntlzw. r3, r3 + beq 1f + + /* Secondary goes to __secondary_hold in kernel. */ + + li r4, 0x60 + mtctr r4 + bctr + +1: + /* Primary delays then goes to _zimage_start in wrapper. */ + + or 31, 31, 31 /* db16cyc */ + or 31, 31, 31 /* db16cyc */ + + lis r4, _zimage_start@ha + addi r4, r4, _zimage_start@l + mtctr r4 + bctr + + . = __system_reset_overlay + 512 + +/* + * __system_reset_kernel - Place holder for the kernel reset vector. + * + * The bootwrapper build script copies 512 bytes from offset 0x100 + * of the rom image to the symbol __system_reset_kernel. At runtime + * the bootwrapper program copies the 512 bytes at __system_reset_kernel + * to ram address 0x100. This symbol must occupy 512 bytes. + */ + + .globl __system_reset_kernel +__system_reset_kernel: + + . = __system_reset_kernel + 512 diff --git a/arch/powerpc/boot/ps3-hvcall.S b/arch/powerpc/boot/ps3-hvcall.S new file mode 100644 index 000000000..ff74102e8 --- /dev/null +++ b/arch/powerpc/boot/ps3-hvcall.S @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 bootwrapper hvcalls. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +#include "ppc_asm.h" + + .machine "ppc64" + +/* + * The PS3 hypervisor uses a 64 bit "C" language calling convention. + * The routines here marshal arguments between the 32 bit wrapper + * program and the 64 bit hvcalls. + * + * wrapper lv1 + * 32-bit (h,l) 64-bit + * + * 1: r3,r4 <-> r3 + * 2: r5,r6 <-> r4 + * 3: r7,r8 <-> r5 + * 4: r9,r10 <-> r6 + * 5: 8(r1),12(r1) <-> r7 + * 6: 16(r1),20(r1) <-> r8 + * 7: 24(r1),28(r1) <-> r9 + * 8: 32(r1),36(r1) <-> r10 + * + */ + +.macro GLOBAL name + .section ".text" + .balign 4 + .globl \name +\name: +.endm + +.macro NO_SUPPORT name + GLOBAL \name + b ps3_no_support +.endm + +.macro HVCALL num + li r11, \num + .long 0x44000022 + extsw r3, r3 +.endm + +.macro SAVE_LR offset=4 + mflr r0 + stw r0, \offset(r1) +.endm + +.macro LOAD_LR offset=4 + lwz r0, \offset(r1) + mtlr r0 +.endm + +.macro LOAD_64_REG target,high,low + sldi r11, \high, 32 + or \target, r11, \low +.endm + +.macro LOAD_64_STACK target,offset + ld \target, \offset(r1) +.endm + +.macro LOAD_R3 + LOAD_64_REG r3,r3,r4 +.endm + +.macro LOAD_R4 + LOAD_64_REG r4,r5,r6 +.endm + +.macro LOAD_R5 + LOAD_64_REG r5,r7,r8 +.endm + +.macro LOAD_R6 + LOAD_64_REG r6,r9,r10 +.endm + +.macro LOAD_R7 + LOAD_64_STACK r7,8 +.endm + +.macro LOAD_R8 + LOAD_64_STACK r8,16 +.endm + +.macro LOAD_R9 + LOAD_64_STACK r9,24 +.endm + +.macro LOAD_R10 + LOAD_64_STACK r10,32 +.endm + +.macro LOAD_REGS_0 + stwu 1,-16(1) + stw 3, 8(1) +.endm + +.macro LOAD_REGS_5 + LOAD_R3 + LOAD_R4 + LOAD_R5 + LOAD_R6 + LOAD_R7 +.endm + +.macro LOAD_REGS_6 + LOAD_REGS_5 + LOAD_R8 +.endm + +.macro LOAD_REGS_8 + LOAD_REGS_6 + LOAD_R9 + LOAD_R10 +.endm + +.macro STORE_REGS_0_1 + lwz r11, 8(r1) + std r4, 0(r11) + mr r4, r3 + li r3, 0 + addi r1,r1,16 +.endm + +.macro STORE_REGS_5_2 + lwz r11, 16(r1) + std r4, 0(r11) + lwz r11, 20(r1) + std r5, 0(r11) +.endm + +.macro STORE_REGS_6_1 + lwz r11, 24(r1) + std r4, 0(r11) +.endm + +GLOBAL lv1_get_logical_ppe_id + SAVE_LR + LOAD_REGS_0 + HVCALL 69 + STORE_REGS_0_1 + LOAD_LR + blr + +GLOBAL lv1_get_logical_partition_id + SAVE_LR + LOAD_REGS_0 + HVCALL 74 + STORE_REGS_0_1 + LOAD_LR + blr + +GLOBAL lv1_get_repository_node_value + SAVE_LR + LOAD_REGS_5 + HVCALL 91 + STORE_REGS_5_2 + LOAD_LR + blr + +GLOBAL lv1_panic + SAVE_LR + LOAD_REGS_8 + HVCALL 255 + LOAD_LR + blr diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c new file mode 100644 index 000000000..89ff46b8b --- /dev/null +++ b/arch/powerpc/boot/ps3.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PS3 bootwrapper support. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" + +extern int lv1_panic(u64 in_1); +extern int lv1_get_logical_partition_id(u64 *out_1); +extern int lv1_get_logical_ppe_id(u64 *out_1); +extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, + u64 in_4, u64 in_5, u64 *out_1, u64 *out_2); + +BSS_STACK(4096); + +/* A buffer that may be edited by tools operating on a zImage binary so as to + * edit the command line passed to vmlinux (by setting /chosen/bootargs). + * The buffer is put in its own section so that tools may locate it easier. + */ + +static char cmdline[BOOT_COMMAND_LINE_SIZE] + __attribute__((__section__("__builtin_cmdline"))); + +static void prep_cmdline(void *chosen) +{ + if (cmdline[0] == '\0') + getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1); + else + setprop_str(chosen, "bootargs", cmdline); + + printf("cmdline: '%s'\n", cmdline); +} + +static void ps3_console_write(const char *buf, int len) +{ +} + +static void ps3_exit(void) +{ + printf("ps3_exit\n"); + + /* lv1_panic will shutdown the lpar. */ + + lv1_panic(0); /* zero = do not reboot */ + while (1); +} + +static int ps3_repository_read_rm_size(u64 *rm_size) +{ + int result; + u64 lpar_id; + u64 ppe_id; + u64 v2; + + result = lv1_get_logical_partition_id(&lpar_id); + + if (result) + return -1; + + result = lv1_get_logical_ppe_id(&ppe_id); + + if (result) + return -1; + + /* + * n1: 0000000062690000 : ....bi.. + * n2: 7075000000000000 : pu...... + * n3: 0000000000000001 : ........ + * n4: 726d5f73697a6500 : rm_size. + */ + + result = lv1_get_repository_node_value(lpar_id, 0x0000000062690000ULL, + 0x7075000000000000ULL, ppe_id, 0x726d5f73697a6500ULL, rm_size, + &v2); + + printf("%s:%d: ppe_id %lu \n", __func__, __LINE__, + (unsigned long)ppe_id); + printf("%s:%d: lpar_id %lu \n", __func__, __LINE__, + (unsigned long)lpar_id); + printf("%s:%d: rm_size %llxh \n", __func__, __LINE__, *rm_size); + + return result ? -1 : 0; +} + +void ps3_copy_vectors(void) +{ + extern char __system_reset_kernel[]; + + memcpy((void *)0x100, __system_reset_kernel, 512); + flush_cache((void *)0x100, 512); +} + +void platform_init(void) +{ + const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ + void *chosen; + unsigned long ft_addr; + u64 rm_size; + + console_ops.write = ps3_console_write; + platform_ops.exit = ps3_exit; + + printf("\n-- PS3 bootwrapper --\n"); + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + chosen = finddevice("/chosen"); + + ps3_repository_read_rm_size(&rm_size); + dt_fixup_memory(0, rm_size); + + if (&_initrd_end > &_initrd_start) { + setprop_val(chosen, "linux,initrd-start", (u32)(_initrd_start)); + setprop_val(chosen, "linux,initrd-end", (u32)(_initrd_end)); + } + + prep_cmdline(chosen); + + ft_addr = dt_ops.finalize(); + + ps3_copy_vectors(); + + printf(" flat tree at 0x%lx\n\r", ft_addr); + + ((kernel_entry_t)0)(ft_addr, 0, NULL); + + ps3_exit(); +} diff --git a/arch/powerpc/boot/pseries-head.S b/arch/powerpc/boot/pseries-head.S new file mode 100644 index 000000000..1b1a638ce --- /dev/null +++ b/arch/powerpc/boot/pseries-head.S @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include "ppc_asm.h" + + .text + + .globl _zimage_start +_zimage_start: + FIXUP_ENDIAN + b _zimage_start_lib diff --git a/arch/powerpc/boot/redboot-83xx.c b/arch/powerpc/boot/redboot-83xx.c new file mode 100644 index 000000000..b610e78b4 --- /dev/null +++ b/arch/powerpc/boot/redboot-83xx.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * RedBoot firmware support + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2008 Codehermit + */ + +#include "ops.h" +#include "stdio.h" +#include "redboot.h" +#include "fsl-soc.h" +#include "io.h" + +static bd_t bd; +BSS_STACK(4096); + +#define MHZ(x) ((x + 500000) / 1000000) + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm/brg"); + if (node) { + printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n", + bd.bi_busfreq, MHZ(bd.bi_busfreq)); + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + } + +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + memcpy(&bd, (char *)r3, sizeof(bd)); + + if (bd.bi_tag != 0x42444944) + return; + + simple_alloc_init(_end, + bd.bi_memstart + bd.bi_memsize - (unsigned long)_end, + 32, 64); + + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; + + loader_info.cmdline = (char *)bd.bi_cmdline; + loader_info.cmdline_len = strlen((char *)bd.bi_cmdline); +} diff --git a/arch/powerpc/boot/redboot-8xx.c b/arch/powerpc/boot/redboot-8xx.c new file mode 100644 index 000000000..d7006eeaf --- /dev/null +++ b/arch/powerpc/boot/redboot-8xx.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * RedBoot firmware support + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "redboot.h" +#include "fsl-soc.h" +#include "io.h" + +static bd_t bd; +BSS_STACK(4096); + +#define MHZ(x) ((x + 500000) / 1000000) + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm/brg"); + if (node) { + printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n", + bd.bi_busfreq, MHZ(bd.bi_busfreq)); + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + memcpy(&bd, (char *)r3, sizeof(bd)); + + if (bd.bi_tag != 0x42444944) + return; + + simple_alloc_init(_end, + bd.bi_memstart + bd.bi_memsize - (unsigned long)_end, + 32, 64); + + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; + + loader_info.cmdline = (char *)bd.bi_cmdline; + loader_info.cmdline_len = strlen((char *)bd.bi_cmdline); +} diff --git a/arch/powerpc/boot/redboot.h b/arch/powerpc/boot/redboot.h new file mode 100644 index 000000000..8f319b1ad --- /dev/null +++ b/arch/powerpc/boot/redboot.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_REDBOOT_H +#define _PPC_REDBOOT_H + +//========================================================================= +// include/asm-ppc/redboot.h +// Copyright (c) 2002, 2003 Gary Thomas ( +// Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + +// +// Board specific details, as provided by RedBoot +// + +/* A Board Information structure that is given to a program when + * RedBoot starts it up. Note: not all fields make sense for all + * architectures and it's up to the platform specific code to fill + * in the details. + */ +typedef struct bd_info { + unsigned int bi_tag; /* Should be 0x42444944 "BDID" */ + unsigned int bi_size; /* Size of this structure */ + unsigned int bi_revision; /* revision of this structure */ + unsigned int bi_bdate; /* bootstrap date, i.e. 0x19971106 */ + unsigned int bi_memstart; /* Memory start address */ + unsigned int bi_memsize; /* Memory (end) size in bytes */ + unsigned int bi_intfreq; /* Internal Freq, in Hz */ + unsigned int bi_busfreq; /* Bus Freq, in Hz */ + unsigned int bi_cpmfreq; /* CPM Freq, in Hz */ + unsigned int bi_brgfreq; /* BRG Freq, in Hz */ + unsigned int bi_vco; /* VCO Out from PLL */ + unsigned int bi_pci_freq; /* PCI Freq, in Hz */ + unsigned int bi_baudrate; /* Default console baud rate */ + unsigned int bi_immr; /* IMMR when called from boot rom */ + unsigned char bi_enetaddr[6]; + unsigned int bi_flashbase; /* Physical address of FLASH memory */ + unsigned int bi_flashsize; /* Length of FLASH memory */ + int bi_flashwidth; /* Width (8,16,32,64) */ + unsigned char *bi_cmdline; /* Pointer to command line */ + unsigned char bi_esa[3][6]; /* Ethernet station addresses */ + unsigned int bi_ramdisk_begin, bi_ramdisk_end; + struct { /* Information about [main] video screen */ + short x_res; /* Horizontal resolution in pixels */ + short y_res; /* Vertical resolution in pixels */ + short bpp; /* Bits/pixel */ + short mode; /* Type of pixels (packed, indexed) */ + unsigned long fb; /* Pointer to frame buffer (pixel) memory */ + } bi_video; + void (*bi_cputc)(char); /* Write a character to the RedBoot console */ + char (*bi_cgetc)(void); /* Read a character from the RedBoot console */ + int (*bi_ctstc)(void); /* Test for input on the RedBoot console */ +} bd_t; + +#define BI_REV 0x0102 /* Version 1.02 */ + +#define bi_pci_busfreq bi_pci_freq +#define bi_immr_base bi_immr +#endif diff --git a/arch/powerpc/boot/reg.h b/arch/powerpc/boot/reg.h new file mode 100644 index 000000000..fd8f4fcbf --- /dev/null +++ b/arch/powerpc/boot/reg.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _PPC_BOOT_REG_H +#define _PPC_BOOT_REG_H +/* + * Copyright 2007 Davud Gibson, IBM Corporation. + */ + +static inline u32 mfpvr(void) +{ + u32 pvr; + asm volatile ("mfpvr %0" : "=r"(pvr)); + return pvr; +} + +#define __stringify_1(x) #x +#define __stringify(x) __stringify_1(x) + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval; }) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) + +register void *__stack_pointer asm("r1"); +#define get_sp() (__stack_pointer) + +#endif /* _PPC_BOOT_REG_H */ diff --git a/arch/powerpc/boot/rs6000.h b/arch/powerpc/boot/rs6000.h new file mode 100644 index 000000000..970754a1f --- /dev/null +++ b/arch/powerpc/boot/rs6000.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* IBM RS/6000 "XCOFF" file definitions for BFD. + Copyright (C) 1990, 1991 Free Software Foundation, Inc. + Written by Mimi Phuong-Thao Vo of IBM + and John Gilmore of Cygnus Support. */ + +/********************** FILE HEADER **********************/ + +struct external_filehdr { + char f_magic[2]; /* magic number */ + char f_nscns[2]; /* number of sections */ + char f_timdat[4]; /* time & date stamp */ + char f_symptr[4]; /* file pointer to symtab */ + char f_nsyms[4]; /* number of symtab entries */ + char f_opthdr[2]; /* sizeof(optional hdr) */ + char f_flags[2]; /* flags */ +}; + + /* IBM RS/6000 */ +#define U802WRMAGIC 0730 /* writeable text segments **chh** */ +#define U802ROMAGIC 0735 /* readonly sharable text segments */ +#define U802TOCMAGIC 0737 /* readonly text segments and TOC */ + +#define BADMAG(x) \ + ((x).f_magic != U802ROMAGIC && (x).f_magic != U802WRMAGIC && \ + (x).f_magic != U802TOCMAGIC) + +#define FILHDR struct external_filehdr +#define FILHSZ 20 + + +/********************** AOUT "OPTIONAL HEADER" **********************/ + + +struct aouthdr { + unsigned char magic[2]; /* type of file */ + unsigned char vstamp[2]; /* version stamp */ + unsigned char tsize[4]; /* text size in bytes, padded to FW bdry */ + unsigned char dsize[4]; /* initialized data " " */ + unsigned char bsize[4]; /* uninitialized data " " */ + unsigned char entry[4]; /* entry pt. */ + unsigned char text_start[4]; /* base of text used for this file */ + unsigned char data_start[4]; /* base of data used for this file */ + unsigned char o_toc[4]; /* address of TOC */ + unsigned char o_snentry[2]; /* section number of entry point */ + unsigned char o_sntext[2]; /* section number of .text section */ + unsigned char o_sndata[2]; /* section number of .data section */ + unsigned char o_sntoc[2]; /* section number of TOC */ + unsigned char o_snloader[2]; /* section number of .loader section */ + unsigned char o_snbss[2]; /* section number of .bss section */ + unsigned char o_algntext[2]; /* .text alignment */ + unsigned char o_algndata[2]; /* .data alignment */ + unsigned char o_modtype[2]; /* module type (??) */ + unsigned char o_cputype[2]; /* cpu type */ + unsigned char o_maxstack[4]; /* max stack size (??) */ + unsigned char o_maxdata[4]; /* max data size (??) */ + unsigned char o_resv2[12]; /* reserved */ +}; + +#define AOUTSZ 72 +#define SMALL_AOUTSZ (28) +#define AOUTHDRSZ 72 + +#define RS6K_AOUTHDR_OMAGIC 0x0107 /* old: text & data writeable */ +#define RS6K_AOUTHDR_NMAGIC 0x0108 /* new: text r/o, data r/w */ +#define RS6K_AOUTHDR_ZMAGIC 0x010B /* paged: text r/o, both page-aligned */ + + +/********************** SECTION HEADER **********************/ + + +struct external_scnhdr { + char s_name[8]; /* section name */ + char s_paddr[4]; /* physical address, aliased s_nlib */ + char s_vaddr[4]; /* virtual address */ + char s_size[4]; /* section size */ + char s_scnptr[4]; /* file ptr to raw data for section */ + char s_relptr[4]; /* file ptr to relocation */ + char s_lnnoptr[4]; /* file ptr to line numbers */ + char s_nreloc[2]; /* number of relocation entries */ + char s_nlnno[2]; /* number of line number entries*/ + char s_flags[4]; /* flags */ +}; + +/* + * names of "special" sections + */ +#define _TEXT ".text" +#define _DATA ".data" +#define _BSS ".bss" +#define _PAD ".pad" +#define _LOADER ".loader" + +#define SCNHDR struct external_scnhdr +#define SCNHSZ 40 + +/* XCOFF uses a special .loader section with type STYP_LOADER. */ +#define STYP_LOADER 0x1000 + +/* XCOFF uses a special .debug section with type STYP_DEBUG. */ +#define STYP_DEBUG 0x2000 + +/* XCOFF handles line number or relocation overflow by creating + another section header with STYP_OVRFLO set. */ +#define STYP_OVRFLO 0x8000 + +/********************** LINE NUMBERS **********************/ + +/* 1 line number entry for every "breakpointable" source line in a section. + * Line numbers are grouped on a per function basis; first entry in a function + * grouping will have l_lnno = 0 and in place of physical address will be the + * symbol table index of the function name. + */ +struct external_lineno { + union { + char l_symndx[4]; /* function name symbol index, iff l_lnno == 0 */ + char l_paddr[4]; /* (physical) address of line number */ + } l_addr; + char l_lnno[2]; /* line number */ +}; + + +#define LINENO struct external_lineno +#define LINESZ 6 + + +/********************** SYMBOLS **********************/ + +#define E_SYMNMLEN 8 /* # characters in a symbol name */ +#define E_FILNMLEN 14 /* # characters in a file name */ +#define E_DIMNUM 4 /* # array dimensions in auxiliary entry */ + +struct external_syment { + union { + char e_name[E_SYMNMLEN]; + struct { + char e_zeroes[4]; + char e_offset[4]; + } e; + } e; + char e_value[4]; + char e_scnum[2]; + char e_type[2]; + char e_sclass[1]; + char e_numaux[1]; +}; + + + +#define N_BTMASK (017) +#define N_TMASK (060) +#define N_BTSHFT (4) +#define N_TSHIFT (2) + + +union external_auxent { + struct { + char x_tagndx[4]; /* str, un, or enum tag indx */ + union { + struct { + char x_lnno[2]; /* declaration line number */ + char x_size[2]; /* str/union/array size */ + } x_lnsz; + char x_fsize[4]; /* size of function */ + } x_misc; + union { + struct { /* if ISFCN, tag, or .bb */ + char x_lnnoptr[4]; /* ptr to fcn line # */ + char x_endndx[4]; /* entry ndx past block end */ + } x_fcn; + struct { /* if ISARY, up to 4 dimen. */ + char x_dimen[E_DIMNUM][2]; + } x_ary; + } x_fcnary; + char x_tvndx[2]; /* tv index */ + } x_sym; + + union { + char x_fname[E_FILNMLEN]; + struct { + char x_zeroes[4]; + char x_offset[4]; + } x_n; + } x_file; + + struct { + char x_scnlen[4]; /* section length */ + char x_nreloc[2]; /* # relocation entries */ + char x_nlinno[2]; /* # line numbers */ + } x_scn; + + struct { + char x_tvfill[4]; /* tv fill value */ + char x_tvlen[2]; /* length of .tv */ + char x_tvran[2][2]; /* tv range */ + } x_tv; /* info about .tv section (in auxent of symbol .tv)) */ + + struct { + unsigned char x_scnlen[4]; + unsigned char x_parmhash[4]; + unsigned char x_snhash[2]; + unsigned char x_smtyp[1]; + unsigned char x_smclas[1]; + unsigned char x_stab[4]; + unsigned char x_snstab[2]; + } x_csect; +}; + +#define SYMENT struct external_syment +#define SYMESZ 18 +#define AUXENT union external_auxent +#define AUXESZ 18 +#define DBXMASK 0x80 /* for dbx storage mask */ +#define SYMNAME_IN_DEBUG(symptr) ((symptr)->n_sclass & DBXMASK) + + + +/********************** RELOCATION DIRECTIVES **********************/ + + +struct external_reloc { + char r_vaddr[4]; + char r_symndx[4]; + char r_size[1]; + char r_type[1]; +}; + + +#define RELOC struct external_reloc +#define RELSZ 10 + +#define DEFAULT_DATA_SECTION_ALIGNMENT 4 +#define DEFAULT_BSS_SECTION_ALIGNMENT 4 +#define DEFAULT_TEXT_SECTION_ALIGNMENT 4 +/* For new sections we haven't heard of before */ +#define DEFAULT_SECTION_ALIGNMENT 4 diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c new file mode 100644 index 000000000..1d221ff42 --- /dev/null +++ b/arch/powerpc/boot/serial.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Generic serial console support + * + * Author: Mark A. Greer + * + * Code in serial_edit_cmdline() copied from + * and was written by Matt Porter . + * + * 2001,2006 (c) MontaVista Software, Inc. + */ +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" + +static int serial_open(void) +{ + struct serial_console_data *scdp = console_ops.data; + return scdp->open(); +} + +static void serial_write(const char *buf, int len) +{ + struct serial_console_data *scdp = console_ops.data; + + while (*buf != '\0') + scdp->putc(*buf++); +} + +static void serial_edit_cmdline(char *buf, int len, unsigned int timeout) +{ + int timer = 0, count; + char ch, *cp; + struct serial_console_data *scdp = console_ops.data; + + count = strlen(buf); + cp = &buf[count]; + count++; + + do { + if (scdp->tstc()) { + while (((ch = scdp->getc()) != '\n') && (ch != '\r')) { + /* Test for backspace/delete */ + if ((ch == '\b') || (ch == '\177')) { + if (cp != buf) { + cp--; + count--; + printf("\b \b"); + } + /* Test for ^x/^u (and wipe the line) */ + } else if ((ch == '\030') || (ch == '\025')) { + while (cp != buf) { + cp--; + count--; + printf("\b \b"); + } + } else if (count < len) { + *cp++ = ch; + count++; + scdp->putc(ch); + } + } + break; /* Exit 'timer' loop */ + } + udelay(1000); /* 1 msec */ + } while (timer++ < timeout); + *cp = 0; +} + +static void serial_close(void) +{ + struct serial_console_data *scdp = console_ops.data; + + if (scdp->close) + scdp->close(); +} + +static void *serial_get_stdout_devp(void) +{ + void *devp; + char devtype[MAX_PROP_LEN]; + char path[MAX_PATH_LEN]; + + devp = finddevice("/chosen"); + if (devp == NULL) + goto err_out; + + if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0 || + getprop(devp, "stdout-path", path, MAX_PATH_LEN) > 0) { + devp = finddevice(path); + if (devp == NULL) + goto err_out; + + if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0) + && !strcmp(devtype, "serial")) + return devp; + } +err_out: + return NULL; +} + +static struct serial_console_data serial_cd; + +/* Node's "compatible" property determines which serial driver to use */ +int serial_console_init(void) +{ + void *devp; + int rc = -1; + + devp = serial_get_stdout_devp(); + if (devp == NULL) + goto err_out; + + if (dt_is_compatible(devp, "ns16550") || + dt_is_compatible(devp, "pnpPNP,501")) + rc = ns16550_console_init(devp, &serial_cd); +#ifdef CONFIG_CPM + else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || + dt_is_compatible(devp, "fsl,cpm1-smc-uart") || + dt_is_compatible(devp, "fsl,cpm2-scc-uart") || + dt_is_compatible(devp, "fsl,cpm2-smc-uart")) + rc = cpm_console_init(devp, &serial_cd); +#endif +#ifdef CONFIG_PPC_MPC52xx + else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart")) + rc = mpc5200_psc_console_init(devp, &serial_cd); +#endif +#ifdef CONFIG_PPC_POWERNV + else if (dt_is_compatible(devp, "ibm,opal-console-raw")) + rc = opal_console_init(devp, &serial_cd); +#endif + + /* Add other serial console driver calls here */ + + if (!rc) { + console_ops.open = serial_open; + console_ops.write = serial_write; + console_ops.close = serial_close; + console_ops.data = &serial_cd; + + if (serial_cd.getc) + console_ops.edit_cmdline = serial_edit_cmdline; + + return 0; + } +err_out: + return -1; +} diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c new file mode 100644 index 000000000..d07796fdf --- /dev/null +++ b/arch/powerpc/boot/simple_alloc.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Implement primitive realloc(3) functionality. + * + * Author: Mark A. Greer + * + * 2006 (c) MontaVista, Software, Inc. + */ + +#include +#include "types.h" +#include "page.h" +#include "string.h" +#include "ops.h" + +#define ENTRY_BEEN_USED 0x01 +#define ENTRY_IN_USE 0x02 + +static struct alloc_info { + unsigned long flags; + unsigned long base; + unsigned long size; +} *alloc_tbl; + +static unsigned long tbl_entries; +static unsigned long alloc_min; +static unsigned long next_base; +static unsigned long space_left; + +/* + * First time an entry is used, its base and size are set. + * An entry can be freed and re-malloc'd but its base & size don't change. + * Should be smart enough for needs of bootwrapper. + */ +static void *simple_malloc(unsigned long size) +{ + unsigned long i; + struct alloc_info *p = alloc_tbl; + + if (size == 0) + goto err_out; + + size = _ALIGN_UP(size, alloc_min); + + for (i=0; iflags & ENTRY_BEEN_USED)) { /* never been used */ + if (size <= space_left) { + p->base = next_base; + p->size = size; + p->flags = ENTRY_BEEN_USED | ENTRY_IN_USE; + next_base += size; + space_left -= size; + return (void *)p->base; + } + goto err_out; /* not enough space left */ + } + /* reuse an entry keeping same base & size */ + else if (!(p->flags & ENTRY_IN_USE) && (size <= p->size)) { + p->flags |= ENTRY_IN_USE; + return (void *)p->base; + } +err_out: + return NULL; +} + +static struct alloc_info *simple_find_entry(void *ptr) +{ + unsigned long i; + struct alloc_info *p = alloc_tbl; + + for (i=0; iflags & ENTRY_BEEN_USED)) + break; + if ((p->flags & ENTRY_IN_USE) && + (p->base == (unsigned long)ptr)) + return p; + } + return NULL; +} + +static void simple_free(void *ptr) +{ + struct alloc_info *p = simple_find_entry(ptr); + + if (p != NULL) + p->flags &= ~ENTRY_IN_USE; +} + +/* + * Change size of area pointed to by 'ptr' to 'size'. + * If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free(). + * 'ptr' must be NULL or a pointer to a non-freed area previously returned by + * simple_realloc() or simple_malloc(). + */ +static void *simple_realloc(void *ptr, unsigned long size) +{ + struct alloc_info *p; + void *new; + + if (size == 0) { + simple_free(ptr); + return NULL; + } + + if (ptr == NULL) + return simple_malloc(size); + + p = simple_find_entry(ptr); + if (p == NULL) /* ptr not from simple_malloc/simple_realloc */ + return NULL; + if (size <= p->size) /* fits in current block */ + return ptr; + + new = simple_malloc(size); + if (new) { + memcpy(new, ptr, p->size); + simple_free(ptr); + } + + return new; +} + +/* + * Returns addr of first byte after heap so caller can see if it took + * too much space. If so, change args & try again. + */ +void *simple_alloc_init(char *base, unsigned long heap_size, + unsigned long granularity, unsigned long max_allocs) +{ + unsigned long heap_base, tbl_size; + + heap_size = _ALIGN_UP(heap_size, granularity); + alloc_min = granularity; + tbl_entries = max_allocs; + + tbl_size = tbl_entries * sizeof(struct alloc_info); + + alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8); + memset(alloc_tbl, 0, tbl_size); + + heap_base = _ALIGN_UP((unsigned long)alloc_tbl + tbl_size, alloc_min); + + next_base = heap_base; + space_left = heap_size; + + platform_ops.malloc = simple_malloc; + platform_ops.free = simple_free; + platform_ops.realloc = simple_realloc; + + return (void *)(heap_base + heap_size); +} diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c new file mode 100644 index 000000000..27591df41 --- /dev/null +++ b/arch/powerpc/boot/simpleboot.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * The simple platform -- for booting when firmware doesn't supply a device + * tree or any platform configuration information. + * All data is extracted from an embedded device tree + * blob. + * + * Authors: Scott Wood + * Grant Likely + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2008 Secret Lab Technologies Ltd. + */ + +#include "ops.h" +#include "types.h" +#include "io.h" +#include "stdio.h" +#include + +BSS_STACK(4*1024); + +extern int platform_specific_init(void) __attribute__((weak)); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + const u32 *na, *ns, *reg, *timebase; + u64 memsize64; + int node, size, i; + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + /* Find the #address-cells and #size-cells properties */ + node = fdt_path_offset(_dtb_start, "/"); + if (node < 0) + fatal("Cannot find root node\n"); + na = fdt_getprop(_dtb_start, node, "#address-cells", &size); + if (!na || (size != 4)) + fatal("Cannot find #address-cells property"); + ns = fdt_getprop(_dtb_start, node, "#size-cells", &size); + if (!ns || (size != 4)) + fatal("Cannot find #size-cells property"); + + /* Find the memory range */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "memory", sizeof("memory")); + if (node < 0) + fatal("Cannot find memory node\n"); + reg = fdt_getprop(_dtb_start, node, "reg", &size); + if (size < (*na+*ns) * sizeof(u32)) + fatal("cannot get memory range\n"); + + /* Only interested in memory based at 0 */ + for (i = 0; i < *na; i++) + if (*reg++ != 0) + fatal("Memory range is not based at address 0\n"); + + /* get the memsize and truncate it to under 4G on 32 bit machines */ + memsize64 = 0; + for (i = 0; i < *ns; i++) + memsize64 = (memsize64 << 32) | *reg++; + if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) + memsize64 = 0xffffffff; + + /* finally, setup the timebase */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (node < 0) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + /* Now we have the memory size; initialize the heap */ + simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64); + + /* prepare the device tree and find the console */ + fdt_init(_dtb_start); + + if (platform_specific_init) + platform_specific_init(); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/stdbool.h b/arch/powerpc/boot/stdbool.h new file mode 100644 index 000000000..2dfe247ed --- /dev/null +++ b/arch/powerpc/boot/stdbool.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) IBM Corporation 2016. + * + * This file is only necessary because some of the pre-boot decompressors + * expect stdbool.h to be available. + */ + +#include "types.h" diff --git a/arch/powerpc/boot/stdint.h b/arch/powerpc/boot/stdint.h new file mode 100644 index 000000000..5cc5e87b0 --- /dev/null +++ b/arch/powerpc/boot/stdint.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) IBM Corporation 2016. + * + * This file is only necessary because some of the pre-boot decompressors + * expect stdint.h to be available. + */ + +#include "types.h" diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c new file mode 100644 index 000000000..b12aa2c0b --- /dev/null +++ b/arch/powerpc/boot/stdio.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) Paul Mackerras 1997. + */ +#include +#include +#include "string.h" +#include "stdio.h" +#include "ops.h" + +size_t strnlen(const char * s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + +char *strrchr(const char *s, int c) +{ + const char *last = NULL; + do { + if (*s == (char)c) + last = s; + } while (*s++); + return (char *)last; +} + +#ifdef __powerpc64__ + +# define do_div(n, base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + __rem = ((unsigned long long)(n)) % __base; \ + (n) = ((unsigned long long)(n)) / __base; \ + __rem; \ +}) + +#else + +extern unsigned int __div64_32(unsigned long long *dividend, + unsigned int divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (unsigned int)(n) % __base; \ + (n) = (unsigned int)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + +#endif /* __powerpc64__ */ + +static int skip_atoi(const char **s) +{ + int i, c; + + for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s) + i = i*10 + c - '0'; + return i; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define PLUS 4 /* show plus */ +#define SPACE 8 /* space if plus */ +#define LEFT 16 /* left justified */ +#define SPECIAL 32 /* 0x */ +#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ + +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) +{ + char c,sign,tmp[66]; + const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; + int i; + + if (type & LARGE) + digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 36) + return 0; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & SIGN) { + if ((signed long long)num < 0) { + sign = '-'; + num = - (signed long long)num; + size--; + } else if (type & PLUS) { + sign = '+'; + size--; + } else if (type & SPACE) { + sign = ' '; + size--; + } + } + if (type & SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++]='0'; + else while (num != 0) { + tmp[i++] = digits[do_div(num, base)]; + } + if (i > precision) + precision = i; + size -= precision; + if (!(type&(ZEROPAD+LEFT))) + while(size-->0) + *str++ = ' '; + if (sign) + *str++ = sign; + if (type & SPECIAL) { + if (base==8) + *str++ = '0'; + else if (base==16) { + *str++ = '0'; + *str++ = digits[33]; + } + } + if (!(type & LEFT)) + while (size-- > 0) + *str++ = c; + while (i < precision--) + *str++ = '0'; + while (i-- > 0) + *str++ = tmp[i]; + while (size-- > 0) + *str++ = ' '; + return str; +} + +int vsprintf(char *buf, const char *fmt, va_list args) +{ + int len; + unsigned long long num; + int i, base; + char * str; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + /* 'z' support added 23/7/1999 S.H. */ + /* 'z' changed to 'Z' --davidm 1/25/99 */ + + + for (str=buf ; *fmt ; ++fmt) { + if (*fmt != '%') { + *str++ = *fmt; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': flags |= LEFT; goto repeat; + case '+': flags |= PLUS; goto repeat; + case ' ': flags |= SPACE; goto repeat; + case '#': flags |= SPECIAL; goto repeat; + case '0': flags |= ZEROPAD; goto repeat; + } + + /* get field width */ + field_width = -1; + if ('0' <= *fmt && *fmt <= '9') + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if ('0' <= *fmt && *fmt <= '9') + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'l' && *(fmt + 1) == 'l') { + qualifier = 'q'; + fmt += 2; + } else if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' + || *fmt == 'Z') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & LEFT)) + while (--field_width > 0) + *str++ = ' '; + *str++ = (unsigned char) va_arg(args, int); + while (--field_width > 0) + *str++ = ' '; + continue; + + case 's': + s = va_arg(args, char *); + if (!s) + s = ""; + + len = strnlen(s, precision); + + if (!(flags & LEFT)) + while (len < field_width--) + *str++ = ' '; + for (i = 0; i < len; ++i) + *str++ = *s++; + while (len < field_width--) + *str++ = ' '; + continue; + + case 'p': + if (field_width == -1) { + field_width = 2*sizeof(void *); + flags |= ZEROPAD; + } + str = number(str, + (unsigned long) va_arg(args, void *), 16, + field_width, precision, flags); + continue; + + + case 'n': + if (qualifier == 'l') { + long * ip = va_arg(args, long *); + *ip = (str - buf); + } else if (qualifier == 'Z') { + size_t * ip = va_arg(args, size_t *); + *ip = (str - buf); + } else { + int * ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + *str++ = '%'; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'X': + flags |= LARGE; + case 'x': + base = 16; + break; + + case 'd': + case 'i': + flags |= SIGN; + case 'u': + break; + + default: + *str++ = '%'; + if (*fmt) + *str++ = *fmt; + else + --fmt; + continue; + } + if (qualifier == 'l') { + num = va_arg(args, unsigned long); + if (flags & SIGN) + num = (signed long) num; + } else if (qualifier == 'q') { + num = va_arg(args, unsigned long long); + if (flags & SIGN) + num = (signed long long) num; + } else if (qualifier == 'Z') { + num = va_arg(args, size_t); + } else if (qualifier == 'h') { + num = (unsigned short) va_arg(args, int); + if (flags & SIGN) + num = (signed short) num; + } else { + num = va_arg(args, unsigned int); + if (flags & SIGN) + num = (signed int) num; + } + str = number(str, num, base, field_width, precision, flags); + } + *str = '\0'; + return str-buf; +} + +static char sprint_buf[1024]; + +int +printf(const char *fmt, ...) +{ + va_list args; + int n; + + va_start(args, fmt); + n = vsprintf(sprint_buf, fmt, args); + va_end(args); + if (console_ops.write) + console_ops.write(sprint_buf, n); + return n; +} diff --git a/arch/powerpc/boot/stdio.h b/arch/powerpc/boot/stdio.h new file mode 100644 index 000000000..d5a7a0f54 --- /dev/null +++ b/arch/powerpc/boot/stdio.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_STDIO_H_ +#define _PPC_BOOT_STDIO_H_ + +#include + +#define ENOMEM 12 /* Out of Memory */ +#define EINVAL 22 /* Invalid argument */ +#define ENOSPC 28 /* No space left on device */ + +extern int printf(const char *fmt, ...) __attribute__((format(printf, 1, 2))); + +#define fprintf(fmt, args...) printf(args) + +extern int vsprintf(char *buf, const char *fmt, va_list args); + +#endif /* _PPC_BOOT_STDIO_H_ */ diff --git a/arch/powerpc/boot/stdlib.c b/arch/powerpc/boot/stdlib.c new file mode 100644 index 000000000..868b019d6 --- /dev/null +++ b/arch/powerpc/boot/stdlib.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * stdlib functions + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "stdlib.h" + +/* Not currently supported: leading whitespace, sign, 0x prefix, zero base */ +unsigned long long int strtoull(const char *ptr, char **end, int base) +{ + unsigned long long ret = 0; + + if (base > 36) + goto out; + + while (*ptr) { + int digit; + + if (*ptr >= '0' && *ptr <= '9' && *ptr < '0' + base) + digit = *ptr - '0'; + else if (*ptr >= 'A' && *ptr < 'A' + base - 10) + digit = *ptr - 'A' + 10; + else if (*ptr >= 'a' && *ptr < 'a' + base - 10) + digit = *ptr - 'a' + 10; + else + break; + + ret *= base; + ret += digit; + ptr++; + } + +out: + if (end) + *end = (char *)ptr; + + return ret; +} diff --git a/arch/powerpc/boot/stdlib.h b/arch/powerpc/boot/stdlib.h new file mode 100644 index 000000000..0a61fcd10 --- /dev/null +++ b/arch/powerpc/boot/stdlib.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_STDLIB_H_ +#define _PPC_BOOT_STDLIB_H_ + +unsigned long long int strtoull(const char *ptr, char **end, int base); + +#endif diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S new file mode 100644 index 000000000..76801eb6d --- /dev/null +++ b/arch/powerpc/boot/string.S @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) Paul Mackerras 1997. + * + * NOTE: this code runs in 32 bit mode and is packaged as ELF32. + */ + +#include "ppc_asm.h" + + .text + .globl strcpy +strcpy: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + stbu r0,1(r5) + bne 1b + blr + + .globl strcat +strcat: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r0,1(r5) + cmpwi 0,r0,0 + bne 1b + addi r5,r5,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + stbu r0,1(r5) + bne 1b + blr + + .globl strchr +strchr: + addi r3,r3,-1 +1: lbzu r0,1(r3) + cmpw 0,r0,r4 + beqlr + cmpwi 0,r0,0 + bne 1b + li r3,0 + blr + + .globl strcmp +strcmp: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + beq 1b + blr + + .globl strncmp +strncmp: + mtctr r5 + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + bdnzt eq,1b + blr + + .globl strlen +strlen: + addi r4,r3,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + bne 1b + subf r3,r3,r4 + blr + + .globl memset +memset: + rlwimi r4,r4,8,16,23 + rlwimi r4,r4,16,0,15 + addi r6,r3,-4 + cmplwi 0,r5,4 + blt 7f + stwu r4,4(r6) + beqlr + andi. r0,r6,3 + add r5,r0,r5 + subf r6,r0,r6 + rlwinm r0,r5,32-2,2,31 + mtctr r0 + bdz 6f +1: stwu r4,4(r6) + bdnz 1b +6: andi. r5,r5,3 +7: cmpwi 0,r5,0 + beqlr + mtctr r5 + addi r6,r6,3 +8: stbu r4,1(r6) + bdnz 8b + blr + + .globl memmove +memmove: + cmplw 0,r3,r4 + bgt backwards_memcpy + /* fall through */ + + .globl memcpy +memcpy: + rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ + addi r6,r3,-4 + addi r4,r4,-4 + beq 3f /* if less than 8 bytes to do */ + andi. r0,r6,3 /* get dest word aligned */ + mtctr r7 + bne 5f + andi. r0,r4,3 /* check src word aligned too */ + bne 3f +1: lwz r7,4(r4) + lwzu r8,8(r4) + stw r7,4(r6) + stwu r8,8(r6) + bdnz 1b + andi. r5,r5,7 +2: cmplwi 0,r5,4 + blt 3f + lwzu r0,4(r4) + addi r5,r5,-4 + stwu r0,4(r6) +3: cmpwi 0,r5,0 + beqlr + mtctr r5 + addi r4,r4,3 + addi r6,r6,3 +4: lbzu r0,1(r4) + stbu r0,1(r6) + bdnz 4b + blr +5: subfic r0,r0,4 + cmpw cr1,r0,r5 + add r7,r0,r4 + andi. r7,r7,3 /* will source be word-aligned too? */ + ble cr1,3b + bne 3b /* do byte-by-byte if not */ + mtctr r0 +6: lbz r7,4(r4) + addi r4,r4,1 + stb r7,4(r6) + addi r6,r6,1 + bdnz 6b + subf r5,r0,r5 + rlwinm. r7,r5,32-3,3,31 + beq 2b + mtctr r7 + b 1b + + .globl backwards_memcpy +backwards_memcpy: + rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ + add r6,r3,r5 + add r4,r4,r5 + beq 3f + andi. r0,r6,3 + mtctr r7 + bne 5f + andi. r0,r4,3 + bne 3f +1: lwz r7,-4(r4) + lwzu r8,-8(r4) + stw r7,-4(r6) + stwu r8,-8(r6) + bdnz 1b + andi. r5,r5,7 +2: cmplwi 0,r5,4 + blt 3f + lwzu r0,-4(r4) + subi r5,r5,4 + stwu r0,-4(r6) +3: cmpwi 0,r5,0 + beqlr + mtctr r5 +4: lbzu r0,-1(r4) + stbu r0,-1(r6) + bdnz 4b + blr +5: cmpw cr1,r0,r5 + subf r7,r0,r4 + andi. r7,r7,3 + ble cr1,3b + bne 3b + mtctr r0 +6: lbzu r7,-1(r4) + stbu r7,-1(r6) + bdnz 6b + subf r5,r0,r5 + rlwinm. r7,r5,32-3,3,31 + beq 2b + mtctr r7 + b 1b + + .globl memchr +memchr: + cmpwi 0,r5,0 + blelr + mtctr r5 + addi r3,r3,-1 +1: lbzu r0,1(r3) + cmpw r0,r4 + beqlr + bdnz 1b + li r3,0 + blr + + .globl memcmp +memcmp: + cmpwi 0,r5,0 + ble 2f + mtctr r5 + addi r6,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r6) + lbzu r0,1(r4) + subf. r3,r0,r3 + bdnzt 2,1b + blr +2: li r3,0 + blr + + +/* + * Flush the dcache and invalidate the icache for a range of addresses. + * + * flush_cache(addr, len) + */ + .global flush_cache +flush_cache: + addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ + rlwinm. 4,4,27,5,31 + mtctr 4 + beqlr +1: dcbf 0,3 + icbi 0,3 + addi 3,3,0x20 + bdnz 1b + sync + isync + blr + diff --git a/arch/powerpc/boot/string.h b/arch/powerpc/boot/string.h new file mode 100644 index 000000000..2b28d1853 --- /dev/null +++ b/arch/powerpc/boot/string.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_STRING_H_ +#define _PPC_BOOT_STRING_H_ +#include + +extern char *strcpy(char *dest, const char *src); +extern char *strcat(char *dest, const char *src); +extern char *strchr(const char *s, int c); +extern char *strrchr(const char *s, int c); +extern int strcmp(const char *s1, const char *s2); +extern int strncmp(const char *s1, const char *s2, size_t n); +extern size_t strlen(const char *s); +extern size_t strnlen(const char *s, size_t count); + +extern void *memset(void *s, int c, size_t n); +extern void *memmove(void *dest, const void *src, unsigned long n); +extern void *memcpy(void *dest, const void *src, unsigned long n); +extern void *memchr(const void *s, int c, size_t n); +extern int memcmp(const void *s1, const void *s2, size_t n); + +#endif /* _PPC_BOOT_STRING_H_ */ diff --git a/arch/powerpc/boot/swab.h b/arch/powerpc/boot/swab.h new file mode 100644 index 000000000..11d2069fb --- /dev/null +++ b/arch/powerpc/boot/swab.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC_BOOT_SWAB_H_ +#define _PPC_BOOT_SWAB_H_ + +static inline u16 swab16(u16 x) +{ + return ((x & (u16)0x00ffU) << 8) | + ((x & (u16)0xff00U) >> 8); +} + +static inline u32 swab32(u32 x) +{ + return ((x & (u32)0x000000ffUL) << 24) | + ((x & (u32)0x0000ff00UL) << 8) | + ((x & (u32)0x00ff0000UL) >> 8) | + ((x & (u32)0xff000000UL) >> 24); +} + +static inline u64 swab64(u64 x) +{ + return (u64)((x & (u64)0x00000000000000ffULL) << 56) | + (u64)((x & (u64)0x000000000000ff00ULL) << 40) | + (u64)((x & (u64)0x0000000000ff0000ULL) << 24) | + (u64)((x & (u64)0x00000000ff000000ULL) << 8) | + (u64)((x & (u64)0x000000ff00000000ULL) >> 8) | + (u64)((x & (u64)0x0000ff0000000000ULL) >> 24) | + (u64)((x & (u64)0x00ff000000000000ULL) >> 40) | + (u64)((x & (u64)0xff00000000000000ULL) >> 56); +} +#endif /* _PPC_BOOT_SWAB_H_ */ diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c new file mode 100644 index 000000000..1b5290374 --- /dev/null +++ b/arch/powerpc/boot/treeboot-akebono.c @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdlib.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define SPRN_PIR 0x11E /* Processor Identification Register */ +#define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */ +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U +#define CCTL0_MCO2 0x8000080FU +#define CCTL0_MCO3 0x80000810U +#define CCTL0_MCO4 0x80000811U +#define CCTL0_MCO5 0x80000812U +#define CCTL0_MCO6 0x80000813U + +static unsigned long long ibm_akebono_memsize; +static long long unsigned mac_addr; + +static unsigned long long ibm_akebono_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for (i = 0; i < MAX_RANKS; i++) { + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_akebono_fixups(void) +{ + void *emac; + u32 reg; + + dt_fixup_memory(0x0ULL, ibm_akebono_memsize); + + /* Fixup the SD timeout frequency */ + mtdcrx(CCTL0_MCO4, 0x1); + + /* Disable SD high-speed mode (which seems to be broken) */ + reg = mfdcrx(CCTL0_MCO2) & ~0x2; + mtdcrx(CCTL0_MCO2, reg); + + /* Set the MAC address */ + emac = finddevice("/plb/opb/ethernet"); + if (emac > 0) { + if (mac_addr) + setprop(emac, "local-mac-address", + ((u8 *) &mac_addr) + 2 , 6); + } +} + +void platform_init(char *userdata) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + int len, i, userdata_len; + char *end; + + userdata[USERDATA_LEN - 1] = '\0'; + userdata_len = strlen(userdata); + for (i = 0; i < userdata_len - 15; i++) { + if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) { + if (i > 0 && userdata[i - 1] != ' ') { + /* We've only found a substring ending + * with local-mac-addr so this isn't + * our mac address. */ + continue; + } + + mac_addr = strtoull(&userdata[i + 15], &end, 16); + + /* Remove the "local-mac-addr=<...>" from the kernel + * command line, including the tailing space if + * present. */ + if (*end == ' ') + end++; + + len = ((int) end) - ((int) &userdata[i]); + memmove(&userdata[i], end, + userdata_len - (len + i) + 1); + break; + } + } + + loader_info.cmdline = userdata; + loader_info.cmdline_len = 256; + + ibm_akebono_memsize = ibm_akebono_detect_memsize(); + if (ibm_akebono_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_akebono_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_akebono_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (node < 0) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/treeboot-bamboo.c b/arch/powerpc/boot/treeboot-bamboo.c new file mode 100644 index 000000000..97b5b161d --- /dev/null +++ b/arch/powerpc/boot/treeboot-bamboo.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + */ +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "stdlib.h" + +BSS_STACK(4096); + +#define PIBS_MAC0 0xfffc0400 +#define PIBS_MAC1 0xfffc0500 +char pibs_mac0[6]; +char pibs_mac1[6]; + +static void read_pibs_mac(void) +{ + unsigned long long mac64; + + mac64 = strtoull((char *)PIBS_MAC0, 0, 16); + memcpy(&pibs_mac0, (char *)&mac64+2, 6); + + mac64 = strtoull((char *)PIBS_MAC1, 0, 16); + memcpy(&pibs_mac1, (char *)&mac64+2, 6); +} + +void platform_init(void) +{ + unsigned long end_of_ram = 0x8000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 32, 64); + read_pibs_mac(); + bamboo_init((u8 *)&pibs_mac0, (u8 *)&pibs_mac1); +} diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c new file mode 100644 index 000000000..5b5363b74 --- /dev/null +++ b/arch/powerpc/boot/treeboot-currituck.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright © 2011 Tony Breeds IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U + +static unsigned long long ibm_currituck_memsize; +static unsigned long long ibm_currituck_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for(i = 0; i < MAX_RANKS; i++){ + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_currituck_fixups(void) +{ + void *devp = finddevice("/"); + u32 dma_ranges[7]; + + dt_fixup_memory(0x0ULL, ibm_currituck_memsize); + + while ((devp = find_node_by_devtype(devp, "pci"))) { + if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) { + printf("%s: Failed to get dma-ranges\r\n", __func__); + continue; + } + + dma_ranges[5] = ibm_currituck_memsize >> 32; + dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL; + + setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)); + } +} + +#define SPRN_PIR 0x11E /* Processor Identification Register */ +void platform_init(void) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + + ibm_currituck_memsize = ibm_currituck_detect_memsize(); + if (ibm_currituck_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_currituck_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_currituck_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (node < 0) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/treeboot-ebony.c b/arch/powerpc/boot/treeboot-ebony.c new file mode 100644 index 000000000..332e28659 --- /dev/null +++ b/arch/powerpc/boot/treeboot-ebony.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Old U-boot compatibility for Ebony + * + * Author: David Gibson + * + * Copyright 2007 David Gibson, IBM Corporatio. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include "ops.h" +#include "stdio.h" +#include "44x.h" + +BSS_STACK(4096); + +#define OPENBIOS_MAC_BASE 0xfffffe0c +#define OPENBIOS_MAC_OFFSET 0xc + +void platform_init(void) +{ + unsigned long end_of_ram = 0x8000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 32, 64); + ebony_init((u8 *)OPENBIOS_MAC_BASE, + (u8 *)(OPENBIOS_MAC_BASE + OPENBIOS_MAC_OFFSET)); +} diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c new file mode 100644 index 000000000..9ab556093 --- /dev/null +++ b/arch/powerpc/boot/treeboot-iss4xx.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +static u32 ibm4xx_memstart; + +static void iss_4xx_fixups(void) +{ + void *memory; + u32 reg[3]; + + memory = finddevice("/memory"); + if (!memory) + fatal("Can't find memory node\n"); + /* This assumes #address-cells = 2, #size-cells =1 and that */ + getprop(memory, "reg", reg, sizeof(reg)); + if (reg[2]) + /* If the device tree specifies the memory range, use it */ + ibm4xx_memstart = reg[1]; + else + /* othersize, read it from the SDRAM controller */ + ibm4xx_sdram_fixup_memsize(); +} + +static void *iss_4xx_vmlinux_alloc(unsigned long size) +{ + return (void *)ibm4xx_memstart; +} + +#define SPRN_PIR 0x11E /* Processor Identification Register */ +void platform_init(void) +{ + unsigned long end_of_ram = 0x08000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + u32 pir_reg; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = iss_4xx_fixups; + platform_ops.vmlinux_alloc = iss_4xx_vmlinux_alloc; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/types.h b/arch/powerpc/boot/types.h new file mode 100644 index 000000000..8a4c418b7 --- /dev/null +++ b/arch/powerpc/boot/types.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _TYPES_H_ +#define _TYPES_H_ + +#include + +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned int u32; +typedef unsigned long long u64; +typedef signed char s8; +typedef short s16; +typedef int s32; +typedef long long s64; + +/* required for opal-api.h */ +typedef u8 uint8_t; +typedef u16 uint16_t; +typedef u32 uint32_t; +typedef u64 uint64_t; +typedef s8 int8_t; +typedef s16 int16_t; +typedef s32 int32_t; +typedef s64 int64_t; + +#define min(x,y) ({ \ + typeof(x) _x = (x); \ + typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x < _y ? _x : _y; }) + +#define max(x,y) ({ \ + typeof(x) _x = (x); \ + typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x > _y ? _x : _y; }) + +#define min_t(type, a, b) min(((type) a), ((type) b)) +#define max_t(type, a, b) max(((type) a), ((type) b)) + +typedef int bool; + +#ifndef true +#define true 1 +#endif + +#ifndef false +#define false 0 +#endif +#endif /* _TYPES_H_ */ diff --git a/arch/powerpc/boot/ugecon.c b/arch/powerpc/boot/ugecon.c new file mode 100644 index 000000000..938a38bd4 --- /dev/null +++ b/arch/powerpc/boot/ugecon.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/boot/ugecon.c + * + * USB Gecko bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + + +/* virtual address base for input/output, retrieved from device tree */ +static void *ug_io_base; + + +static u32 ug_io_transaction(u32 in) +{ + u32 *csr_reg = ug_io_base + EXI_CSR; + u32 *data_reg = ug_io_base + EXI_DATA; + u32 *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + data = in_be32(data_reg); + return data; +} + +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +static void ug_putc(char ch) +{ + int count = 16; + + if (!ug_io_base) + return; + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count >= 0) + ug_raw_putc(ch); +} + +void ug_console_write(const char *buf, int len) +{ + char *b = (char *)buf; + + while (len--) { + if (*b == '\n') + ug_putc('\r'); + ug_putc(*b++); + } +} + +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + return ug_io_transaction(0x90000000) == 0x04700000; +} + +static void *ug_grab_exi_io_base(void) +{ + u32 v; + void *devp; + + devp = find_node_by_compatible(NULL, "nintendo,flipper-exi"); + if (devp == NULL) + goto err_out; + if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) + goto err_out; + + return (void *)v; + +err_out: + return NULL; +} + +void *ug_probe(void) +{ + void *exi_io_base; + int i; + + exi_io_base = ug_grab_exi_io_base(); + if (!exi_io_base) + return NULL; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; +} + diff --git a/arch/powerpc/boot/ugecon.h b/arch/powerpc/boot/ugecon.h new file mode 100644 index 000000000..291f33f77 --- /dev/null +++ b/arch/powerpc/boot/ugecon.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * arch/powerpc/boot/ugecon.h + * + * USB Gecko early bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#ifndef __UGECON_H +#define __UGECON_H + +extern void *ug_probe(void); + +extern void ug_putc(char ch); +extern void ug_console_write(const char *buf, int len); + +#endif /* __UGECON_H */ + diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S new file mode 100644 index 000000000..6a92376da --- /dev/null +++ b/arch/powerpc/boot/util.S @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copied from + * + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * kexec bits: + * Copyright (C) 2002-2003 Eric Biederman + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + */ +#include "ppc_asm.h" + +#define SPRN_PVR 0x11F /* Processor Version Register */ + + .text + +/* udelay needs to know the period of the + * timebase in nanoseconds. This used to be hardcoded to be 60ns + * (period of 66MHz/4). Now a variable is used that is initialized to + * 60 for backward compatibility, but it can be overridden as necessary + * with code something like this: + * extern unsigned long timebase_period_ns; + * timebase_period_ns = 1000000000 / bd->bi_tbfreq; + */ + .data + .globl timebase_period_ns +timebase_period_ns: + .long 60 + + .text +/* + * Delay for a number of microseconds + */ + .globl udelay +udelay: + mulli r4,r3,1000 /* nanoseconds */ + /* Change r4 to be the number of ticks using: + * (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns + * timebase_period_ns defaults to 60 (16.6MHz) */ + mflr r5 + bcl 20,31,0f +0: mflr r6 + mtlr r5 + addis r5,r6,(timebase_period_ns-0b)@ha + lwz r5,(timebase_period_ns-0b)@l(r5) + add r4,r4,r5 + addi r4,r4,-1 + divw r4,r4,r5 /* BUS ticks */ +1: MFTBU(r5) + MFTBL(r6) + MFTBU(r7) + cmpw 0,r5,r7 + bne 1b /* Get [synced] base time */ + addc r9,r6,r4 /* Compute end time */ + addze r8,r5 +2: MFTBU(r5) + cmpw 0,r5,r8 + blt 2b + bgt 3f + MFTBL(r6) + cmpw 0,r6,r9 + blt 2b +3: blr diff --git a/arch/powerpc/boot/wii-head.S b/arch/powerpc/boot/wii-head.S new file mode 100644 index 000000000..7b1e5a019 --- /dev/null +++ b/arch/powerpc/boot/wii-head.S @@ -0,0 +1,137 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * arch/powerpc/boot/wii-head.S + * + * Nintendo Wii bootwrapper entry. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * - if the high BATs are enabled or not + * + * We enable the high BATs, enable the caches if not already enabled, + * enable the MMU with an identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + mtspr 0x230, 8 /* IBAT4U */ + mtspr 0x232, 8 /* IBAT5U */ + mtspr 0x234, 8 /* IBAT6U */ + mtspr 0x236, 8 /* IBAT7U */ + mtspr 0x238, 8 /* DBAT4U */ + mtspr 0x23a, 8 /* DBAT5U */ + mtspr 0x23c, 8 /* DBAT6U */ + mtspr 0x23e, 8 /* DBAT7U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + lis 8, 0x1000 /* MEM2 */ + ori 8, 8, 0x07ff /* 64MiB */ + lis 9, 0x1000 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x217, 9 /* IBAT3L */ + mtspr 0x21e, 8 /* DBAT3U */ + mtspr 0x21f, 9 /* DBAT3L */ + + /* enable the high BATs */ + mfspr 8, 0x3f3 /* HID4 */ + oris 8, 8, 0x0200 + mtspr 0x3f3, 8 /* HID4 */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + /* turn on the front blue led (aka: yay! we got here!) */ + lis 8, 0x0d00 + ori 8, 8, 0x00c0 + lwz 9, 0(8) + ori 9, 9, 0x20 + stw 9, 0(8) + + b _zimage_start_lib + diff --git a/arch/powerpc/boot/wii.c b/arch/powerpc/boot/wii.c new file mode 100644 index 000000000..59406ad04 --- /dev/null +++ b/arch/powerpc/boot/wii.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/boot/wii.c + * + * Nintendo Wii bootwrapper support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +#define HW_REG(x) ((void *)(x)) + +#define EXI_CTRL HW_REG(0x0d800070) +#define EXI_CTRL_ENABLE (1<<0) + +#define MEM2_TOP (0x10000000 + 64*1024*1024) +#define FIRMWARE_DEFAULT_SIZE (12*1024*1024) + + +struct mipc_infohdr { + char magic[3]; + u8 version; + u32 mem2_boundary; + u32 ipc_in; + size_t ipc_in_size; + u32 ipc_out; + size_t ipc_out_size; +}; + +static int mipc_check_address(u32 pa) +{ + /* only MEM2 addresses */ + if (pa < 0x10000000 || pa > 0x14000000) + return -EINVAL; + return 0; +} + +static struct mipc_infohdr *mipc_get_infohdr(void) +{ + struct mipc_infohdr **hdrp, *hdr; + + /* 'mini' header pointer is the last word of MEM2 memory */ + hdrp = (struct mipc_infohdr **)0x13fffffc; + if (mipc_check_address((u32)hdrp)) { + printf("mini: invalid hdrp %08X\n", (u32)hdrp); + hdr = NULL; + goto out; + } + + hdr = *hdrp; + if (mipc_check_address((u32)hdr)) { + printf("mini: invalid hdr %08X\n", (u32)hdr); + hdr = NULL; + goto out; + } + if (memcmp(hdr->magic, "IPC", 3)) { + printf("mini: invalid magic\n"); + hdr = NULL; + goto out; + } + +out: + return hdr; +} + +static int mipc_get_mem2_boundary(u32 *mem2_boundary) +{ + struct mipc_infohdr *hdr; + int error; + + hdr = mipc_get_infohdr(); + if (!hdr) { + error = -1; + goto out; + } + + if (mipc_check_address(hdr->mem2_boundary)) { + printf("mini: invalid mem2_boundary %08X\n", + hdr->mem2_boundary); + error = -EINVAL; + goto out; + } + *mem2_boundary = hdr->mem2_boundary; + error = 0; +out: + return error; + +} + +static void platform_fixups(void) +{ + void *mem; + u32 reg[4]; + u32 mem2_boundary; + int len; + int error; + + mem = finddevice("/memory"); + if (!mem) + fatal("Can't find memory node\n"); + + /* two ranges of (address, size) words */ + len = getprop(mem, "reg", reg, sizeof(reg)); + if (len != sizeof(reg)) { + /* nothing to do */ + goto out; + } + + /* retrieve MEM2 boundary from 'mini' */ + error = mipc_get_mem2_boundary(&mem2_boundary); + if (error) { + /* if that fails use a sane value */ + mem2_boundary = MEM2_TOP - FIRMWARE_DEFAULT_SIZE; + } + + if (mem2_boundary > reg[2] && mem2_boundary < reg[2] + reg[3]) { + reg[3] = mem2_boundary - reg[2]; + printf("top of MEM2 @ %08X\n", reg[2] + reg[3]); + setprop(mem, "reg", reg, sizeof(reg)); + } + +out: + return; +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 24*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + /* + * 'mini' boots the Broadway processor with EXI disabled. + * We need it enabled before probing for the USB Gecko. + */ + out_be32(EXI_CTRL, in_be32(EXI_CTRL) | EXI_CTRL_ENABLE); + + if (ug_probe()) + console_ops.write = ug_console_write; + + platform_ops.fixups = platform_fixups; +} + diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper new file mode 100755 index 000000000..25321ce26 --- /dev/null +++ b/arch/powerpc/boot/wrapper @@ -0,0 +1,578 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +# Copyright (C) 2006 Paul Mackerras, IBM Corporation + +# This script takes a kernel binary and optionally an initrd image +# and/or a device-tree blob, and creates a bootable zImage for a +# given platform. + +# Options: +# -o zImage specify output file +# -p platform specify platform (links in $platform.o) +# -i initrd specify initrd file +# -d devtree specify device-tree blob +# -s tree.dts specify device-tree source file (needs dtc installed) +# -e esm_blob specify ESM blob for secure images +# -c cache $kernel.strip.gz (use if present & newer, else make) +# -C prefix specify command prefix for cross-building tools +# (strip, objcopy, ld) +# -D dir specify directory containing data files used by script +# (default ./arch/powerpc/boot) +# -W dir specify working directory for temporary files (default .) +# -z use gzip (legacy) +# -Z zsuffix compression to use (gz, xz, lzma, lzo or none) + +# Stop execution if any command fails +set -e + +export LC_ALL=C + +# Allow for verbose output +if [ "$V" = 1 ]; then + set -x + map="-Map wrapper.map" +fi + +# defaults +kernel= +ofile=zImage +platform=of +initrd= +dtb= +dts= +esm_blob= +cacheit= +binary= +compression=.gz +uboot_comp=gzip +pie= +format= +notext= +rodynamic= + +# cross-compilation prefix +CROSS= + +# mkimage wrapper script +MKIMAGE=$srctree/scripts/mkuboot.sh + +# directory for object and other files used by this script +object=arch/powerpc/boot +objbin=$object +dtc=scripts/dtc/dtc + +# directory for working files +tmpdir=. + +usage() { + echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 + echo ' [-d devtree] [-s tree.dts] [-e esm_blob]' >&2 + echo ' [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2 + echo ' [-Z (gz|xz|lzma|lzo|none)] [--no-compression] [vmlinux]' >&2 + exit 1 +} + +run_cmd() { + if [ "$V" = 1 ]; then + $* 2>&1 + else + local msg + + set +e + msg=$($* 2>&1) + + if [ $? -ne "0" ]; then + echo $msg + exit 1 + fi + set -e + fi +} + +while [ "$#" -gt 0 ]; do + case "$1" in + -o) + shift + [ "$#" -gt 0 ] || usage + ofile="$1" + ;; + -p) + shift + [ "$#" -gt 0 ] || usage + platform="$1" + ;; + -i) + shift + [ "$#" -gt 0 ] || usage + initrd="$1" + ;; + -d) + shift + [ "$#" -gt 0 ] || usage + dtb="$1" + ;; + -e) + shift + [ "$#" -gt 0 ] || usage + esm_blob="$1" + ;; + -s) + shift + [ "$#" -gt 0 ] || usage + dts="$1" + ;; + -c) + cacheit=y + ;; + -C) + shift + [ "$#" -gt 0 ] || usage + CROSS="$1" + ;; + -D) + shift + [ "$#" -gt 0 ] || usage + object="$1" + objbin="$1" + ;; + -W) + shift + [ "$#" -gt 0 ] || usage + tmpdir="$1" + ;; + -z) + compression=.gz + uboot_comp=gzip + ;; + -Z) + shift + [ "$#" -gt 0 ] || usage + [ "$1" != "gz" -o "$1" != "xz" -o "$1" != "lzma" -o "$1" != "lzo" -o "$1" != "none" ] || usage + + compression=".$1" + uboot_comp=$1 + + if [ $compression = ".none" ]; then + compression= + uboot_comp=none + fi + if [ $uboot_comp = "gz" ]; then + uboot_comp=gzip + fi + ;; + --no-gzip) + # a "feature" of the wrapper script is that it can be used outside + # the kernel tree. So keeping this around for backwards compatibility. + compression= + uboot_comp=none + ;; + -?) + usage + ;; + *) + [ -z "$kernel" ] || usage + kernel="$1" + ;; + esac + shift +done + + +if [ -n "$dts" ]; then + if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then + dts="$object/dts/$dts" + fi + if [ -z "$dtb" ]; then + dtb="$platform.dtb" + fi + $dtc -O dtb -o "$dtb" -b 0 "$dts" +fi + +if [ -z "$kernel" ]; then + kernel=vmlinux +fi + +LC_ALL=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`" +case "$elfformat" in + elf64-powerpcle) format=elf64lppc ;; + elf64-powerpc) format=elf32ppc ;; + elf32-powerpc) format=elf32ppc ;; +esac + +ld_version() +{ + # Poached from scripts/ld-version.sh, but we don't want to call that because + # this script (wrapper) is distributed separately from the kernel source. + # Extract linker version number from stdin and turn into single number. + awk '{ + gsub(".*\\)", ""); + gsub(".*version ", ""); + gsub("-.*", ""); + split($1,a, "."); + if( length(a[3]) == "8" ) + # a[3] is probably a date of format yyyymmdd used for release snapshots. We + # can assume it to be zero as it does not signify a new version as such. + a[3] = 0; + print a[1]*100000000 + a[2]*1000000 + a[3]*10000; + exit + }' +} + +ld_is_lld() +{ + ${CROSS}ld -V 2>&1 | grep -q LLD +} + +# Do not include PT_INTERP segment when linking pie. Non-pie linking +# just ignores this option. +nodl="--no-dynamic-linker" + +# suppress some warnings in recent ld versions +nowarn="-z noexecstack" +if "${CROSS}ld" -v --no-warn-rwx-segments >/dev/null 2>&1; then + nowarn="$nowarn --no-warn-rwx-segments" +fi + +platformo=$object/"$platform".o +lds=$object/zImage.lds +ext=strip +objflags=-S +tmp=$tmpdir/zImage.$$.o +ksection=.kernel:vmlinux.strip +isection=.kernel:initrd +esection=.kernel:esm_blob +link_address='0x400000' +make_space=y + + +if [ -n "$esm_blob" -a "$platform" != "pseries" ]; then + echo "ESM blob not support on non-pseries platforms" >&2 + exit 1 +fi + +case "$platform" in +of) + platformo="$object/of.o $object/epapr.o" + make_space=n + ;; +pseries) + platformo="$object/pseries-head.o $object/of.o $object/epapr.o" + link_address='0x4000000' + if [ "$format" != "elf32ppc" ]; then + link_address= + pie=-pie + notext='-z notext' + fi + make_space=n + ;; +pmac|chrp) + platformo="$object/of.o $object/epapr.o" + make_space=n + ;; +coff) + platformo="$object/crt0.o $object/of.o $object/epapr.o" + lds=$object/zImage.coff.lds + link_address='0x500000' + make_space=n + pie= + ;; +miboot|uboot*) + # miboot and U-boot want just the bare bits, not an ELF binary + ext=bin + objflags="-O binary" + tmp="$ofile" + ksection=image + isection=initrd + ;; +cuboot*) + binary=y + compression= + case "$platform" in + *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc) + platformo=$object/cuboot-8xx.o + ;; + *5200*|*-motionpro) + platformo=$object/cuboot-52xx.o + ;; + *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter) + platformo=$object/cuboot-pq2.o + ;; + *-mpc824*) + platformo=$object/cuboot-824x.o + ;; + *-mpc83*|*-asp834x*) + platformo=$object/cuboot-83xx.o + ;; + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*) + platformo=$object/cuboot-85xx-cpm2.o + ;; + *-mpc85*|*-tqm85*) + platformo=$object/cuboot-85xx.o + ;; + *-amigaone) + link_address='0x800000' + ;; + esac + ;; +ps3) + platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o" + lds=$object/zImage.ps3.lds + compression= + ext=bin + objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data" + ksection=.kernel:vmlinux.bin + isection=.kernel:initrd + link_address='' + make_space=n + pie= + ;; +ep88xc|ep8248e) + platformo="$object/fixed-head.o $object/$platform.o" + binary=y + ;; +adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; +simpleboot-*) + platformo="$object/fixed-head.o $object/simpleboot.o" + binary=y + ;; +asp834x-redboot) + platformo="$object/fixed-head.o $object/redboot-83xx.o" + binary=y + ;; +xpedite52*) + link_address='0x1400000' + platformo=$object/cuboot-85xx.o + ;; +gamecube|wii) + link_address='0x600000' + platformo="$object/$platform-head.o $object/$platform.o" + ;; +microwatt) + link_address='0x500000' + platformo="$object/fixed-head.o $object/$platform.o" + binary=y + ;; +treeboot-currituck) + link_address='0x1000000' + ;; +treeboot-akebono) + link_address='0x1000000' + ;; +treeboot-iss4xx-mpic) + platformo="$object/treeboot-iss4xx.o" + ;; +epapr) + platformo="$object/pseries-head.o $object/epapr.o $object/epapr-wrapper.o" + link_address='0x20000000' + pie=-pie + notext='-z notext' + rodynamic=$(if ${CROSS}ld -V 2>&1 | grep -q LLD ; then echo "-z rodynamic"; fi) + ;; +mvme5100) + platformo="$object/fixed-head.o $object/mvme5100.o" + binary=y + ;; +mvme7100) + platformo="$object/motload-head.o $object/mvme7100.o" + link_address='0x4000000' + binary=y + ;; +esac + +vmz="$tmpdir/`basename \"$kernel\"`.$ext" + +# Calculate the vmlinux.strip size +${CROSS}objcopy $objflags "$kernel" "$vmz.$$" +strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$") + +if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then + # recompress the image if we need to + case $compression in + .xz) + xz --check=crc32 -f -6 "$vmz.$$" + ;; + .gz) + gzip -n -f -9 "$vmz.$$" + ;; + .lzma) + xz --format=lzma -f -6 "$vmz.$$" + ;; + .lzo) + lzop -f -9 "$vmz.$$" + ;; + *) + # drop the compression suffix so the stripped vmlinux is used + compression= + uboot_comp=none + ;; + esac + + if [ -n "$cacheit" ]; then + mv -f "$vmz.$$$compression" "$vmz$compression" + else + vmz="$vmz.$$" + fi +else + rm -f $vmz.$$ +fi + +vmz="$vmz$compression" + +if [ "$make_space" = "y" ]; then + # Round the size to next higher MB limit + round_size=$(((strip_size + 0xfffff) & 0xfff00000)) + + round_size=0x$(printf "%x" $round_size) + link_addr=$(printf "%d" $link_address) + + if [ $link_addr -lt $strip_size ]; then + echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \ + "overlaps the address of the wrapper($link_address)" + echo "INFO: Fixing the link_address of wrapper to ($round_size)" + link_address=$round_size + fi +fi + +# Extract kernel version information, some platforms want to include +# it in the image header +version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \ + head -n1 | cut -d' ' -f3` +if [ -n "$version" ]; then + uboot_version="-n Linux-$version" +fi + +# physical offset of kernel image +membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'` + +case "$platform" in +uboot) + rm -f "$ofile" + ${MKIMAGE} -A ppc -O linux -T kernel -C $uboot_comp -a $membase -e $membase \ + $uboot_version -d "$vmz" "$ofile" + if [ -z "$cacheit" ]; then + rm -f "$vmz" + fi + exit 0 + ;; +esac + +addsec() { + ${CROSS}objcopy $4 $1 \ + --add-section=$3="$2" \ + --set-section-flags=$3=contents,alloc,load,readonly,data +} + +addsec $tmp "$vmz" $ksection $object/empty.o +if [ -z "$cacheit" ]; then + rm -f "$vmz" +fi + +if [ -n "$initrd" ]; then + addsec $tmp "$initrd" $isection +fi + +if [ -n "$dtb" ]; then + addsec $tmp "$dtb" .kernel:dtb + if [ -n "$dts" ]; then + rm $dtb + fi +fi + +if [ -n "$esm_blob" ]; then + addsec $tmp "$esm_blob" $esection +fi + +if [ "$platform" != "miboot" ]; then + if [ -n "$link_address" ] ; then + text_start="-Ttext $link_address" + fi +#link everything + ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $nowarn $rodynamic $notext -o "$ofile" $map \ + $platformo $tmp $object/wrapper.a + rm $tmp +fi + +# Some platforms need the zImage's entry point and base address +base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1` +entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3` + +if [ -n "$binary" ]; then + mv "$ofile" "$ofile".elf + ${CROSS}objcopy -O binary "$ofile".elf "$ofile" +fi + +# post-processing needed for some platforms +case "$platform" in +pseries|chrp) + $objbin/addnote "$ofile" + ;; +coff) + ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" + $objbin/hack-coff "$ofile" + ;; +cuboot*) + gzip -n -f -9 "$ofile" + ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ + $uboot_version -d "$ofile".gz "$ofile" + ;; +treeboot*) + mv "$ofile" "$ofile.elf" + $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry" + if [ -z "$cacheit" ]; then + rm -f "$ofile.elf" + fi + exit 0 + ;; +ps3) + # The ps3's loader supports loading a gzipped binary image from flash + # rom to ram addr zero. The loader then enters the system reset + # vector at addr 0x100. A bootwrapper overlay is used to arrange for + # a binary image of the kernel to be at addr zero, and yet have a + # suitable bootwrapper entry at 0x100. To construct the final rom + # image 512 bytes from offset 0x100 is copied to the bootwrapper + # place holder at symbol __system_reset_kernel. The 512 bytes of the + # bootwrapper entry code at symbol __system_reset_overlay is then + # copied to offset 0x100. At runtime the bootwrapper program copies + # the data at __system_reset_kernel back to addr 0x100. + + system_reset_overlay=0x`${CROSS}nm "$ofile" \ + | grep ' __system_reset_overlay$' \ + | cut -d' ' -f1` + system_reset_overlay=`printf "%d" $system_reset_overlay` + system_reset_kernel=0x`${CROSS}nm "$ofile" \ + | grep ' __system_reset_kernel$' \ + | cut -d' ' -f1` + system_reset_kernel=`printf "%d" $system_reset_kernel` + overlay_dest="256" + overlay_size="512" + + ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" + + run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$overlay_dest seek=$system_reset_kernel \ + count=$overlay_size bs=1 + + run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$system_reset_overlay seek=$overlay_dest \ + count=$overlay_size bs=1 + + odir="$(dirname "$ofile.bin")" + + # The ps3's flash loader has a size limit of 16 MiB for the uncompressed + # image. If a compressed image that exceeded this limit is written to + # flash the loader will decompress that image until the 16 MiB limit is + # reached, then enter the system reset vector of the partially decompressed + # image. No warning is issued. + rm -f "$odir"/{otheros,otheros-too-big}.bld + size=$(${CROSS}nm --no-sort --radix=d "$ofile" | grep -E ' _end$' | cut -d' ' -f1) + bld="otheros.bld" + if [ $size -gt $((0x1000000)) ]; then + bld="otheros-too-big.bld" + fi + gzip -n --force -9 --stdout "$ofile.bin" > "$odir/$bld" + ;; +esac diff --git a/arch/powerpc/boot/xz_config.h b/arch/powerpc/boot/xz_config.h new file mode 100644 index 000000000..9506a96eb --- /dev/null +++ b/arch/powerpc/boot/xz_config.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __XZ_CONFIG_H__ +#define __XZ_CONFIG_H__ + +/* + * most of this is copied from lib/xz/xz_private.h, we can't use their defines + * since the boot wrapper is not built in the same environment as the rest of + * the kernel. + */ + +#include "types.h" +#include "swab.h" + +static inline uint32_t swab32p(void *p) +{ + uint32_t *q = p; + + return swab32(*q); +} + +#ifdef __LITTLE_ENDIAN__ +#define get_le32(p) (*((uint32_t *) (p))) +#define cpu_to_be32(x) swab32(x) +static inline u32 be32_to_cpup(const u32 *p) +{ + return swab32p((u32 *)p); +} +#else +#define get_le32(p) swab32p(p) +#define cpu_to_be32(x) (x) +static inline u32 be32_to_cpup(const u32 *p) +{ + return *p; +} +#endif + +static inline uint32_t get_unaligned_be32(const void *p) +{ + return be32_to_cpup(p); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + *((u32 *)p) = cpu_to_be32(val); +} + +#define memeq(a, b, size) (memcmp(a, b, size) == 0) +#define memzero(buf, size) memset(buf, 0, size) + +/* prevent the inclusion of the xz-preboot MM headers */ +#define DECOMPR_MM_H +#define memmove memmove + +/* xz.h needs to be included directly since we need enum xz_mode */ +#include "../../../include/linux/xz.h" + +#endif diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S new file mode 100644 index 000000000..117951295 --- /dev/null +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +OUTPUT_ARCH(powerpc:common) +ENTRY(_zimage_start_opd) +EXTERN(_zimage_start_opd) +SECTIONS +{ + .text : + { + _start = .; + *(.text) + *(.fixup) + _etext = .; + } + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(__builtin_*) + *(.sdata*) + *(.got2) + + _dtb_start = .; + *(.kernel:dtb) + _dtb_end = .; + + _vmlinux_start = .; + *(.kernel:vmlinux.strip) + _vmlinux_end = .; + + _initrd_start = .; + *(.kernel:initrd) + _initrd_end = .; + } + + . = ALIGN(4096); + _edata = .; + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + _end = . ; + + /DISCARD/ : + { + *(.comment) + } +} diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S new file mode 100644 index 000000000..d65cd55a6 --- /dev/null +++ b/arch/powerpc/boot/zImage.lds.S @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include + +#ifdef CONFIG_PPC64_BOOT_WRAPPER +OUTPUT_ARCH(powerpc:common64) +#else +OUTPUT_ARCH(powerpc:common) +#endif +ENTRY(_zimage_start) +EXTERN(_zimage_start) +SECTIONS +{ + .text : + { + _start = .; + *(.text) + *(.fixup) + _etext = .; + } + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) +#ifndef CONFIG_PPC64_BOOT_WRAPPER + *(.got2) +#endif + } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .dynamic : + { + __dynamic_start = .; + *(.dynamic) + } + +#ifdef CONFIG_PPC64_BOOT_WRAPPER + .got : ALIGN(256) + { + *(.got .toc) + } +#endif + + .hash : { *(.hash) } + .interp : { *(.interp) } + .rela.dyn : + { +#ifdef CONFIG_PPC64_BOOT_WRAPPER + __rela_dyn_start = .; +#endif + *(.rela*) + } + + . = ALIGN(8); + .kernel:dtb : + { + _dtb_start = .; + *(.kernel:dtb) + _dtb_end = .; + } + + . = ALIGN(4096); + .kernel:vmlinux.strip : + { + _vmlinux_start = .; + *(.kernel:vmlinux.strip) + _vmlinux_end = .; + } + + . = ALIGN(4096); + .kernel:initrd : + { + _initrd_start = .; + *(.kernel:initrd) + _initrd_end = .; + } + + . = ALIGN(4096); + .kernel:esm_blob : + { + _esm_blob_start = .; + *(.kernel:esm_blob) + _esm_blob_end = .; + } + + . = ALIGN(4096); + .bss : + { + _edata = .; + __bss_start = .; + *(.sbss) + *(.bss) + *(COMMON) + _end = . ; + } +} diff --git a/arch/powerpc/boot/zImage.ps3.lds.S b/arch/powerpc/boot/zImage.ps3.lds.S new file mode 100644 index 000000000..d0ffb4936 --- /dev/null +++ b/arch/powerpc/boot/zImage.ps3.lds.S @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +OUTPUT_ARCH(powerpc:common) +ENTRY(_zimage_start) +EXTERN(_zimage_start) +SECTIONS +{ + _vmlinux_start = .; + .kernel:vmlinux.bin : { *(.kernel:vmlinux.bin) } + _vmlinux_end = .; + + . = ALIGN(8); + _dtb_start = .; + .kernel:dtb : { *(.kernel:dtb) } + _dtb_end = .; + + . = ALIGN(4096); + _initrd_start = .; + .kernel:initrd : { *(.kernel:initrd) } + _initrd_end = .; + + _start = .; + .text : + { + *(.text) + *(.fixup) + } + _etext = .; + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + . = ALIGN(4096); + _edata = .; + + . = ALIGN(4096); + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + . = ALIGN(4096); + _end = . ; +} -- cgit v1.3.1