From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- arch/mips/rb532/setup.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 arch/mips/rb532/setup.c (limited to 'arch/mips/rb532/setup.c') diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c new file mode 100644 index 000000000..51af9d374 --- /dev/null +++ b/arch/mips/rb532/setup.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * setup.c - boot time setup code + */ + +#include +#include + +#include +#include +#include +#include + +#include +#include + +struct pci_reg __iomem *pci_reg; +EXPORT_SYMBOL(pci_reg); + +static struct resource pci0_res[] = { + { + .name = "pci_reg0", + .start = PCI0_BASE_ADDR, + .end = PCI0_BASE_ADDR + sizeof(struct pci_reg), + .flags = IORESOURCE_MEM, + } +}; + +static void rb_machine_restart(char *command) +{ + /* just jump to the reset vector */ + writel(0x80000001, IDT434_REG_BASE + RST); + ((void (*)(void)) KSEG1ADDR(0x1FC00000u))(); +} + +static void rb_machine_halt(void) +{ + for (;;) + continue; +} + +void __init plat_mem_setup(void) +{ + u32 val; + + _machine_restart = rb_machine_restart; + _machine_halt = rb_machine_halt; + pm_power_off = rb_machine_halt; + + set_io_port_base(KSEG1); + + pci_reg = ioremap(pci0_res[0].start, + pci0_res[0].end - pci0_res[0].start); + if (!pci_reg) { + printk(KERN_ERR "Could not remap PCI registers\n"); + return; + } + + val = __raw_readl(&pci_reg->pcic); + val &= 0xFFFFFF7; + __raw_writel(val, (void *)&pci_reg->pcic); + +#ifdef CONFIG_PCI + /* Enable PCI interrupts in EPLD Mask register */ + *epld_mask = 0x0; + *(epld_mask + 1) = 0x0; +#endif + write_c0_wired(0); +} + +const char *get_system_type(void) +{ + switch (mips_machtype) { + case MACH_MIKROTIK_RB532A: + return "Mikrotik RB532A"; + break; + default: + return "Mikrotik RB532"; + break; + } +} -- cgit v1.3.1