From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- arch/mips/generic/Kconfig | 127 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 arch/mips/generic/Kconfig (limited to 'arch/mips/generic/Kconfig') diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig new file mode 100644 index 000000000..7dc5b3821 --- /dev/null +++ b/arch/mips/generic/Kconfig @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0 +if MIPS_GENERIC_KERNEL + +config LEGACY_BOARDS + bool + help + Select this from your board if the board must use a legacy, non-UHI, + boot protocol. This will cause the kernel to scan through the list of + supported machines calling their detect functions in turn if the + kernel is booted without being provided with an FDT via the UHI + boot protocol. + +config YAMON_DT_SHIM + bool + help + Select this from your board if the board uses the YAMON bootloader + and you wish to include code which helps translate various + YAMON-provided environment variables into a device tree properties. + +comment "Legacy (non-UHI/non-FIT) Boards" + +config LEGACY_BOARD_SEAD3 + bool "Support MIPS SEAD-3 boards" + select LEGACY_BOARDS + select YAMON_DT_SHIM + help + Enable this to include support for booting on MIPS SEAD-3 FPGA-based + development boards, which boot using a legacy boot protocol. + +comment "MSCC Ocelot doesn't work with SEAD3 enabled" + depends on LEGACY_BOARD_SEAD3 + +config LEGACY_BOARD_OCELOT + bool "Legacy support for Ocelot based boards" + depends on LEGACY_BOARD_SEAD3=n + select LEGACY_BOARDS + select SOC_VCOREIII + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + +config SOC_VCOREIII + bool + select GPIOLIB + select MSCC_OCELOT_IRQ + select MSCC_OCELOT #will be removed when driver no more use it + +#Will be removed when the driver using it will be converted to SOC_VCOREIII +config MSCC_OCELOT + bool + +comment "FIT/UHI Boards" + +config FIT_IMAGE_FDT_BOSTON + bool "Include FDT for MIPS Boston boards" + help + Enable this to include the FDT for the MIPS Boston development board + from Imagination Technologies in the FIT kernel image. You should + enable this if you wish to boot on a MIPS Boston board, as it is + expected by the bootloader. + +config FIT_IMAGE_FDT_MARDUK + bool "Include FDT for IMG Pistachio Marduk (CI40) boards" + help + Enable this to include the FDT for the IMG Pistachio Marduk (CI40) + from Imagination Technologies in the FIT kernel image. + +config FIT_IMAGE_FDT_NI169445 + bool "Include FDT for NI 169445" + help + Enable this to include the FDT for the 169445 platform from + National Instruments in the FIT kernel image. + +config FIT_IMAGE_FDT_XILFPGA + bool "Include FDT for Xilfpga" + help + Enable this to include the FDT for the MIPSfpga platform + from Imagination Technologies in the FIT kernel image. + +config FIT_IMAGE_FDT_OCELOT + bool "Include FDT for Microsemi Ocelot development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Ocelot development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + +config FIT_IMAGE_FDT_LUTON + bool "Include FDT for Microsemi Luton development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Luton development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + +config FIT_IMAGE_FDT_JAGUAR2 + bool "Include FDT for Microsemi Jaguar2 development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Jaguar2 development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + +config FIT_IMAGE_FDT_SERVAL + bool "Include FDT for Microsemi Serval development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Serval development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + +config BOARD_INGENIC + bool "Support boards based on Ingenic SoCs" + select MACH_INGENIC_GENERIC + help + Enable support for boards based on Ingenic SoCs. + +config VIRT_BOARD_RANCHU + bool "Support Ranchu platform for Android emulator" + help + This enables support for the platform used by Android emulator. + + Ranchu platform consists of a set of virtual devices. This platform + enables emulation of variety of virtual configurations while using + Android emulator. Android emulator is based on Qemu, and contains + the support for the same set of virtual devices. + +endif -- cgit v1.3.1