From 119e9db233ad0f4cbd4cfb9f9385a7bca378b37d Mon Sep 17 00:00:00 2001 From: Zeng Chi Date: Mon, 21 Sep 2026 18:24:42 +0800 Subject: KVM: Don't pre-reserve xarray entries when storing empty/NULL attributes Skip the xarray reservation loop when clearing all memory attributes, as storing NULL only erases the entry and never needs to allocate, so no reservation (and no cleanup of a failed one) is required in that case. Suggested-by: Sean Christopherson Cc: David Ballesteros Signed-off-by: Zeng Chi Link: https://patch.msgid.link/20260921102442.1232375-1-zeng_chi911@163.com [sean: split to separate patch] Signed-off-by: Sean Christopherson --- arch/mips/cobalt/setup.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/mips/cobalt/setup.c (limited to 'arch/mips/cobalt/setup.c') diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c new file mode 100644 index 000000000..9a266bf78 --- /dev/null +++ b/arch/mips/cobalt/setup.c @@ -0,0 +1,116 @@ +/* + * Setup pointers to hardware dependent routines. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +const char *get_system_type(void) +{ + switch (cobalt_board_id) { + case COBALT_BRD_ID_QUBE1: + return "Cobalt Qube"; + case COBALT_BRD_ID_RAQ1: + return "Cobalt RaQ"; + case COBALT_BRD_ID_QUBE2: + return "Cobalt Qube2"; + case COBALT_BRD_ID_RAQ2: + return "Cobalt RaQ2"; + } + return "MIPS Cobalt"; +} + +/* + * Cobalt doesn't have PS/2 keyboard/mouse interfaces, + * keyboard controller is never used. + * Also PCI-ISA bridge DMA controller is never used. + */ +static struct resource cobalt_reserved_resources[] = { + { /* dma1 */ + .start = 0x00, + .end = 0x1f, + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* keyboard */ + .start = 0x60, + .end = 0x6f, + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* dma page reg */ + .start = 0x80, + .end = 0x8f, + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* dma2 */ + .start = 0xc0, + .end = 0xdf, + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, +}; + +void __init plat_mem_setup(void) +{ + int i; + + _machine_restart = cobalt_machine_restart; + _machine_halt = cobalt_machine_halt; + pm_power_off = cobalt_machine_halt; + + set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE)); + + /* I/O port resource */ + ioport_resource.end = 0x01ffffff; + + /* These resources have been reserved by VIA SuperI/O chip. */ + for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++) + request_resource(&ioport_resource, cobalt_reserved_resources + i); +} + +/* + * Prom init. We read our one and only communication with the firmware. + * Grab the amount of installed memory. + * Better boot loaders (CoLo) pass a command line too :-) + */ + +void __init prom_init(void) +{ + unsigned long memsz; + int argc, i; + char **argv; + + memsz = fw_arg0 & 0x7fff0000; + argc = fw_arg0 & 0x0000ffff; + argv = (char **)fw_arg1; + + for (i = 1; i < argc; i++) { + strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE); + if (i < (argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); + } + + memblock_add(0, memsz); + + setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0); +} -- cgit v1.3.1