From 34ff636f322c6d5e4f0a52338fa63a7dff09a495 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Sat, 18 Jul 2026 13:15:36 -0400 Subject: scftorture: Count single_rpc offline failures in statistics output scf_torture_stats_print() aggregates each invoker thread's counters into a local scf_statistics structure before printing, but the n_single_rpc_ofl field is missing from the aggregation loop. As a result, the "single_rpc_ofl" value printed in the statistics line is always zero, even when smp_call_function_single() invocations for the RPC test have failed due to offline CPUs and been counted by the invoker threads. Add the missing accumulation so that the printed value reflects the actual counts. Signed-off-by: Joel Fernandes Signed-off-by: Paul E. McKenney --- arch/microblaze/boot/.gitignore | 3 + arch/microblaze/boot/Makefile | 35 ++++ arch/microblaze/boot/dts/Makefile | 20 ++ arch/microblaze/boot/dts/linked_dtb.S | 2 + arch/microblaze/boot/dts/system.dts | 353 ++++++++++++++++++++++++++++++++++ 5 files changed, 413 insertions(+) create mode 100644 arch/microblaze/boot/.gitignore create mode 100644 arch/microblaze/boot/Makefile create mode 100644 arch/microblaze/boot/dts/Makefile create mode 100644 arch/microblaze/boot/dts/linked_dtb.S create mode 100644 arch/microblaze/boot/dts/system.dts (limited to 'arch/microblaze/boot') diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore new file mode 100644 index 000000000..11a9e229f --- /dev/null +++ b/arch/microblaze/boot/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +linux.bin* +simpleImage.* diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile new file mode 100644 index 000000000..2b42c370d --- /dev/null +++ b/arch/microblaze/boot/Makefile @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# arch/microblaze/boot/Makefile +# + +targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.* + +OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary + +$(obj)/linux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE + $(call if_changed,uimage) + +$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE + $(call if_changed,gzip) + +quiet_cmd_strip = STRIP $< $@$2 + cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \ + -K _fdt_start $< -o $@$2 + +UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR) + +$(obj)/simpleImage.$(DTB): vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/simpleImage.$(DTB).ub: $(obj)/simpleImage.$(DTB) FORCE + $(call if_changed,uimage) + +$(obj)/simpleImage.$(DTB).unstrip: vmlinux FORCE + $(call if_changed,copy) + +$(obj)/simpleImage.$(DTB).strip: vmlinux FORCE + $(call if_changed,strip) diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile new file mode 100644 index 000000000..b84e2cbb2 --- /dev/null +++ b/arch/microblaze/boot/dts/Makefile @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +# + +dtb-y := system.dtb + +ifneq ($(DTB),) +obj-y += linked_dtb.o + +# Ensure system.dtb exists +$(obj)/linked_dtb.o: $(obj)/system.dtb + +# Generate system.dtb from $(DTB).dtb +ifneq ($(DTB),system) +$(obj)/system.dtb: $(obj)/$(DTB).dtb + $(call if_changed,copy) +endif +endif + +# Rule to build device tree blobs +DTC_FLAGS := -p 1024 diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S new file mode 100644 index 000000000..23345af37 --- /dev/null +++ b/arch/microblaze/boot/dts/linked_dtb.S @@ -0,0 +1,2 @@ +.section __fdt_blob,"a" +.incbin "arch/microblaze/boot/dts/system.dtb" diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts new file mode 100644 index 000000000..22252451e --- /dev/null +++ b/arch/microblaze/boot/dts/system.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Generator version: 1.1 + * + * (C) Copyright 2007-2008 Xilinx, Inc. + * (C) Copyright 2007-2009 Michal Simek + * + * Michal SIMEK + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101 + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,microblaze"; + model = "testing"; + DDR2_SDRAM: memory@90000000 { + device_type = "memory"; + reg = < 0x90000000 0x10000000 >; + } ; + aliases { + ethernet0 = &Hard_Ethernet_MAC; + serial0 = &RS232_Uart_1; + } ; + chosen { + bootargs = "console=ttyUL0,115200 highres=on"; + stdout-path = "/plb@0/serial@84000000"; + } ; + cpus { + #address-cells = <1>; + #cpus = <0x1>; + #size-cells = <0>; + microblaze_0: cpu@0 { + clock-frequency = <125000000>; + compatible = "xlnx,microblaze-7.10.d"; + d-cache-baseaddr = <0x90000000>; + d-cache-highaddr = <0x9fffffff>; + d-cache-line-size = <0x10>; + d-cache-size = <0x2000>; + device_type = "cpu"; + i-cache-baseaddr = <0x90000000>; + i-cache-highaddr = <0x9fffffff>; + i-cache-line-size = <0x10>; + i-cache-size = <0x2000>; + model = "microblaze,7.10.d"; + reg = <0>; + timebase-frequency = <125000000>; + xlnx,addr-tag-bits = <0xf>; + xlnx,allow-dcache-wr = <0x1>; + xlnx,allow-icache-wr = <0x1>; + xlnx,area-optimized = <0x0>; + xlnx,cache-byte-size = <0x2000>; + xlnx,d-lmb = <0x1>; + xlnx,d-opb = <0x0>; + xlnx,d-plb = <0x1>; + xlnx,data-size = <0x20>; + xlnx,dcache-addr-tag = <0xf>; + xlnx,dcache-always-used = <0x1>; + xlnx,dcache-byte-size = <0x2000>; + xlnx,dcache-line-len = <0x4>; + xlnx,dcache-use-fsl = <0x1>; + xlnx,debug-enabled = <0x1>; + xlnx,div-zero-exception = <0x1>; + xlnx,dopb-bus-exception = <0x0>; + xlnx,dynamic-bus-sizing = <0x1>; + xlnx,edge-is-positive = <0x1>; + xlnx,family = "virtex5"; + xlnx,endianness = <0x1>; + xlnx,fpu-exception = <0x1>; + xlnx,fsl-data-size = <0x20>; + xlnx,fsl-exception = <0x0>; + xlnx,fsl-links = <0x0>; + xlnx,i-lmb = <0x1>; + xlnx,i-opb = <0x0>; + xlnx,i-plb = <0x1>; + xlnx,icache-always-used = <0x1>; + xlnx,icache-line-len = <0x4>; + xlnx,icache-use-fsl = <0x1>; + xlnx,ill-opcode-exception = <0x1>; + xlnx,instance = "microblaze_0"; + xlnx,interconnect = <0x1>; + xlnx,interrupt-is-edge = <0x0>; + xlnx,iopb-bus-exception = <0x0>; + xlnx,mmu-dtlb-size = <0x4>; + xlnx,mmu-itlb-size = <0x2>; + xlnx,mmu-tlb-access = <0x3>; + xlnx,mmu-zones = <0x10>; + xlnx,number-of-pc-brk = <0x1>; + xlnx,number-of-rd-addr-brk = <0x0>; + xlnx,number-of-wr-addr-brk = <0x0>; + xlnx,opcode-0x0-illegal = <0x1>; + xlnx,pvr = <0x2>; + xlnx,pvr-user1 = <0x0>; + xlnx,pvr-user2 = <0x0>; + xlnx,reset-msr = <0x0>; + xlnx,sco = <0x0>; + xlnx,unaligned-exceptions = <0x1>; + xlnx,use-barrel = <0x1>; + xlnx,use-dcache = <0x1>; + xlnx,use-div = <0x1>; + xlnx,use-ext-brk = <0x1>; + xlnx,use-ext-nm-brk = <0x1>; + xlnx,use-extended-fsl-instr = <0x0>; + xlnx,use-fpu = <0x2>; + xlnx,use-hw-mul = <0x2>; + xlnx,use-icache = <0x1>; + xlnx,use-interrupt = <0x1>; + xlnx,use-mmu = <0x3>; + xlnx,use-msr-instr = <0x1>; + xlnx,use-pcmp-instr = <0x1>; + } ; + } ; + mb_plb: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus"; + ranges ; + FLASH: flash@a0000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xa0000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x1f40>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x0>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ranges ; + ethernet@81c00000 { + compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 5 2 >; + llink-connected = <&PIM3>; + local-mac-address = [ 00 0a 35 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <0x1>; + xlnx,phy-type = <0x1>; + xlnx,phyaddr = <0x1>; + xlnx,rxcsum = <0x0>; + xlnx,rxfifo = <0x1000>; + xlnx,temac-type = <0x0>; + xlnx,txcsum = <0x0>; + xlnx,txfifo = <0x1000>; + } ; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x7735940>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; + LEDs_8Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0x8>; + xlnx,interrupt-present = <0x1>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + #gpio-cells = <2>; + gpio-controller; + } ; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&LEDs_8Bit 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&LEDs_8Bit 5 1>; + }; + + red { + label = "Red"; + gpios = <&LEDs_8Bit 6 1>; + }; + + green { + label = "Green"; + gpios = <&LEDs_8Bit 7 1>; + }; + } ; + + gpio-restart { + compatible = "gpio-restart"; + /* + * FIXME: is this active low or active high? + * the current flag (1) indicates active low. + * delay measures are templates, should be adjusted + * to datasheet or trial-and-error with real hardware. + */ + gpios = <&LEDs_8Bit 2 1>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + }; + + RS232_Uart_1: serial@84000000 { + clock-frequency = <125000000>; + compatible = "xlnx,xps-uartlite-1.00.a"; + current-speed = <115200>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 0 >; + port-number = <0>; + reg = < 0x84000000 0x10000 >; + xlnx,baudrate = <0x1c200>; + xlnx,data-bits = <0x8>; + xlnx,family = "virtex5"; + xlnx,odd-parity = <0x0>; + xlnx,use-parity = <0x0>; + } ; + debug_module: debug@84400000 { + compatible = "xlnx,mdm-1.00.d"; + reg = < 0x84400000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,interconnect = <0x1>; + xlnx,jtag-chain = <0x2>; + xlnx,mb-dbg-ports = <0x1>; + xlnx,uart-width = <0x8>; + xlnx,use-uart = <0x1>; + xlnx,write-fsl-ports = <0x0>; + } ; + mpmc@90000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,mpmc-4.02.a"; + ranges ; + PIM3: sdma@84600180 { + compatible = "xlnx,ll-dma-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 2 2 1 2 >; + reg = < 0x84600180 0x80 >; + } ; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,kind-of-intr = <0x100>; + xlnx,num-intr-inputs = <0x9>; + } ; + xps_timer_1: timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 3 2 >; + reg = < 0x83c00000 0x10000 >; + xlnx,count-width = <0x20>; + xlnx,one-timer-only = <0x0>; + } ; + } ; +} ; -- cgit v1.3.1