From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- arch/m68k/atari/debug.c | 329 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 329 insertions(+) create mode 100644 arch/m68k/atari/debug.c (limited to 'arch/m68k/atari/debug.c') diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c new file mode 100644 index 000000000..03cb5e08d --- /dev/null +++ b/arch/m68k/atari/debug.c @@ -0,0 +1,329 @@ +/* + * linux/arch/m68k/atari/debug.c + * + * Atari debugging and serial console stuff + * + * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Can be set somewhere, if a SCC master reset has already be done and should + * not be repeated; used by kgdb */ +int atari_SCC_reset_done; +EXPORT_SYMBOL(atari_SCC_reset_done); + +static struct console atari_console_driver = { + .name = "debug", + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static inline void ata_mfp_out(char c) +{ + while (!(st_mfp.trn_stat & 0x80)) /* wait for tx buf empty */ + barrier(); + st_mfp.usart_dta = c; +} + +static void atari_mfp_console_write(struct console *co, const char *str, + unsigned int count) +{ + while (count--) { + if (*str == '\n') + ata_mfp_out('\r'); + ata_mfp_out(*str++); + } +} + +static inline void ata_scc_out(char c) +{ + do { + MFPDELAY(); + } while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ + MFPDELAY(); + atari_scc.cha_b_data = c; +} + +static void atari_scc_console_write(struct console *co, const char *str, + unsigned int count) +{ + while (count--) { + if (*str == '\n') + ata_scc_out('\r'); + ata_scc_out(*str++); + } +} + +static inline void ata_midi_out(char c) +{ + while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */ + barrier(); + acia.mid_data = c; +} + +static void atari_midi_console_write(struct console *co, const char *str, + unsigned int count) +{ + while (count--) { + if (*str == '\n') + ata_midi_out('\r'); + ata_midi_out(*str++); + } +} + +static int ata_par_out(char c) +{ + unsigned char tmp; + /* This a some-seconds timeout in case no printer is connected */ + unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ; + + while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */ + ; + if (!i) + return 0; + + sound_ym.rd_data_reg_sel = 15; /* select port B */ + sound_ym.wd_data = c; /* put char onto port */ + sound_ym.rd_data_reg_sel = 14; /* select port A */ + tmp = sound_ym.rd_data_reg_sel; + sound_ym.wd_data = tmp & ~0x20; /* set strobe L */ + MFPDELAY(); /* wait a bit */ + sound_ym.wd_data = tmp | 0x20; /* set strobe H */ + return 1; +} + +static void atari_par_console_write(struct console *co, const char *str, + unsigned int count) +{ + static int printer_present = 1; + + if (!printer_present) + return; + + while (count--) { + if (*str == '\n') { + if (!ata_par_out('\r')) { + printer_present = 0; + return; + } + } + if (!ata_par_out(*str++)) { + printer_present = 0; + return; + } + } +} + +#if 0 +int atari_mfp_console_wait_key(struct console *co) +{ + while (!(st_mfp.rcv_stat & 0x80)) /* wait for rx buf filled */ + barrier(); + return st_mfp.usart_dta; +} + +int atari_scc_console_wait_key(struct console *co) +{ + do { + MFPDELAY(); + } while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */ + MFPDELAY(); + return atari_scc.cha_b_data; +} + +int atari_midi_console_wait_key(struct console *co) +{ + while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */ + barrier(); + return acia.mid_data; +} +#endif + +/* + * The following two functions do a quick'n'dirty initialization of the MFP or + * SCC serial ports. They're used by the debugging interface, kgdb, and the + * serial console code. + */ +static void __init atari_init_mfp_port(int cflag) +{ + /* + * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150 + * bps, resp., and work only correct if there's a RSVE or RSSPEED + */ + static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 }; + int baud = cflag & CBAUD; + int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0; + int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00; + + if (cflag & CBAUDEX) + baud += B38400; + if (baud < B1200 || baud > B38400+2) + baud = B9600; /* use default 9600bps for non-implemented rates */ + baud -= B1200; /* baud_table[] starts at 1200bps */ + + st_mfp.trn_stat &= ~0x01; /* disable TX */ + st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */ + st_mfp.tim_ct_cd &= 0x70; /* stop timer D */ + st_mfp.tim_dt_d = baud_table[baud]; + st_mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */ + st_mfp.trn_stat |= 0x01; /* enable TX */ +} + +#define SCC_WRITE(reg, val) \ + do { \ + atari_scc.cha_b_ctrl = (reg); \ + MFPDELAY(); \ + atari_scc.cha_b_ctrl = (val); \ + MFPDELAY(); \ + } while (0) + +/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a + * delay of ~ 60us. */ +#define LONG_DELAY() \ + do { \ + int i; \ + for (i = 100; i > 0; --i) \ + MFPDELAY(); \ + } while (0) + +static void __init atari_init_scc_port(int cflag) +{ + static int clksrc_table[9] = + /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */ + { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 }; + static int brgsrc_table[9] = + /* reg 14: 0 = RTxC, 2 = PCLK */ + { 2, 2, 2, 2, 2, 2, 0, 2, 2 }; + static int clkmode_table[9] = + /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */ + { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 }; + static int div_table[9] = + /* reg12 (BRG low) */ + { 208, 138, 103, 50, 24, 11, 1, 0, 0 }; + + int baud = cflag & CBAUD; + int clksrc, clkmode, div, reg3, reg5; + + if (cflag & CBAUDEX) + baud += B38400; + if (baud < B1200 || baud > B38400+2) + baud = B9600; /* use default 9600bps for non-implemented rates */ + baud -= B1200; /* tables starts at 1200bps */ + + clksrc = clksrc_table[baud]; + clkmode = clkmode_table[baud]; + div = div_table[baud]; + if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) { + /* special treatment for TT, where rates >= 38400 are done via TRxC */ + clksrc = 0x28; /* TRxC */ + clkmode = baud == 6 ? 0xc0 : + baud == 7 ? 0x80 : /* really 76800bps */ + 0x40; /* really 153600bps */ + div = 0; + } + + reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40; + reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */; + + (void)atari_scc.cha_b_ctrl; /* reset reg pointer */ + SCC_WRITE(9, 0xc0); /* reset */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) + : 0 | 0x04 /* 1 stopbit */ | clkmode); + SCC_WRITE(3, reg3); + SCC_WRITE(5, reg5); + SCC_WRITE(9, 0); /* no interrupts */ + LONG_DELAY(); /* extra delay after WR9 access */ + SCC_WRITE(10, 0); /* NRZ mode */ + SCC_WRITE(11, clksrc); /* main clock source */ + SCC_WRITE(12, div); /* BRG value */ + SCC_WRITE(13, 0); /* BRG high byte */ + SCC_WRITE(14, brgsrc_table[baud]); + SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0)); + SCC_WRITE(3, reg3 | 1); + SCC_WRITE(5, reg5 | 8); + + atari_SCC_reset_done = 1; +} + +static void __init atari_init_midi_port(int cflag) +{ + int baud = cflag & CBAUD; + int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00; + /* warning 7N1 isn't possible! (instead 7O2 is used...) */ + int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04; + int div; + + /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as + * default) the standard MIDI speed 31250. */ + if (cflag & CBAUDEX) + baud += B38400; + if (baud == B4800) + div = ACIA_DIV64; /* really 7812.5 bps */ + else if (baud == B38400+2 /* 115200 */) + div = ACIA_DIV1; /* really 500 kbps (does that work??) */ + else + div = ACIA_DIV16; /* 31250 bps, standard for MIDI */ + + /* RTS low, ints disabled */ + acia.mid_ctrl = div | csize | parity | + ((atari_switches & ATARI_SWITCH_MIDI) ? + ACIA_RHTID : ACIA_RLTID); +} + +static int __init atari_debug_setup(char *arg) +{ + bool registered; + + if (!MACH_IS_ATARI) + return 0; + + if (!strcmp(arg, "ser")) + /* defaults to ser2 for a Falcon and ser1 otherwise */ + arg = MACH_IS_FALCON ? "ser2" : "ser1"; + + registered = !!atari_console_driver.write; + if (!strcmp(arg, "ser1")) { + /* ST-MFP Modem1 serial port */ + atari_init_mfp_port(B9600|CS8); + atari_console_driver.write = atari_mfp_console_write; + } else if (!strcmp(arg, "ser2")) { + /* SCC Modem2 serial port */ + atari_init_scc_port(B9600|CS8); + atari_console_driver.write = atari_scc_console_write; + } else if (!strcmp(arg, "midi")) { + /* MIDI port */ + atari_init_midi_port(B9600|CS8); + atari_console_driver.write = atari_midi_console_write; + } else if (!strcmp(arg, "par")) { + /* parallel printer */ + atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */ + sound_ym.rd_data_reg_sel = 7; /* select mixer control */ + sound_ym.wd_data = 0xff; /* sound off, ports are output */ + sound_ym.rd_data_reg_sel = 15; /* select port B */ + sound_ym.wd_data = 0; /* no char */ + sound_ym.rd_data_reg_sel = 14; /* select port A */ + sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */ + atari_console_driver.write = atari_par_console_write; + } + if (atari_console_driver.write && !registered) + register_console(&atari_console_driver); + + return 0; +} + +early_param("debug", atari_debug_setup); -- cgit v1.3.1