From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- arch/arm64/lib/strlen.S | 213 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 arch/arm64/lib/strlen.S (limited to 'arch/arm64/lib/strlen.S') diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S new file mode 100644 index 000000000..4919fe81a --- /dev/null +++ b/arch/arm64/lib/strlen.S @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2013-2021, Arm Limited. + * + * Adapted from the original at: + * https://github.com/ARM-software/optimized-routines/blob/98e4d6a5c13c8e54/string/aarch64/strlen.S + */ + +#include +#include +#include + +/* Assumptions: + * + * ARMv8-a, AArch64, unaligned accesses, min page size 4k. + */ + +#define L(label) .L ## label + +/* Arguments and results. */ +#define srcin x0 +#define len x0 + +/* Locals and temporaries. */ +#define src x1 +#define data1 x2 +#define data2 x3 +#define has_nul1 x4 +#define has_nul2 x5 +#define tmp1 x4 +#define tmp2 x5 +#define tmp3 x6 +#define tmp4 x7 +#define zeroones x8 + + /* NUL detection works on the principle that (X - 1) & (~X) & 0x80 + (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + can be done in parallel across the entire word. A faster check + (X - 1) & 0x80 is zero for non-NUL ASCII characters, but gives + false hits for characters 129..255. */ + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +/* + * When KASAN_HW_TAGS is in use, memory is checked at MTE_GRANULE_SIZE + * (16-byte) granularity, and we must ensure that no access straddles this + * alignment boundary. + */ +#ifdef CONFIG_KASAN_HW_TAGS +#define MIN_PAGE_SIZE MTE_GRANULE_SIZE +#else +#define MIN_PAGE_SIZE 4096 +#endif + + /* Since strings are short on average, we check the first 16 bytes + of the string for a NUL character. In order to do an unaligned ldp + safely we have to do a page cross check first. If there is a NUL + byte we calculate the length from the 2 8-byte words using + conditional select to reduce branch mispredictions (it is unlikely + strlen will be repeatedly called on strings with the same length). + + If the string is longer than 16 bytes, we align src so don't need + further page cross checks, and process 32 bytes per iteration + using the fast NUL check. If we encounter non-ASCII characters, + fallback to a second loop using the full NUL check. + + If the page cross check fails, we read 16 bytes from an aligned + address, remove any characters before the string, and continue + in the main loop using aligned loads. Since strings crossing a + page in the first 16 bytes are rare (probability of + 16/MIN_PAGE_SIZE ~= 0.4%), this case does not need to be optimized. + + AArch64 systems have a minimum page size of 4k. We don't bother + checking for larger page sizes - the cost of setting up the correct + page size is just not worth the extra gain from a small reduction in + the cases taking the slow path. Note that we only care about + whether the first fetch, which may be misaligned, crosses a page + boundary. */ + +SYM_FUNC_START(__pi_strlen) + and tmp1, srcin, MIN_PAGE_SIZE - 1 + mov zeroones, REP8_01 + cmp tmp1, MIN_PAGE_SIZE - 16 + b.gt L(page_cross) + ldp data1, data2, [srcin] +#ifdef __AARCH64EB__ + /* For big-endian, carry propagation (if the final byte in the + string is 0x01) means we cannot use has_nul1/2 directly. + Since we expect strings to be small and early-exit, + byte-swap the data now so has_null1/2 will be correct. */ + rev data1, data1 + rev data2, data2 +#endif + sub tmp1, data1, zeroones + orr tmp2, data1, REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, REP8_7f + bics has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + ccmp has_nul2, 0, 0, eq + beq L(main_loop_entry) + + /* Enter with C = has_nul1 == 0. */ + csel has_nul1, has_nul1, has_nul2, cc + mov len, 8 + rev has_nul1, has_nul1 + clz tmp1, has_nul1 + csel len, xzr, len, cc + add len, len, tmp1, lsr 3 + ret + + /* The inner loop processes 32 bytes per iteration and uses the fast + NUL check. If we encounter non-ASCII characters, use a second + loop with the accurate NUL check. */ + .p2align 4 +L(main_loop_entry): + bic src, srcin, 15 + sub src, src, 16 +L(main_loop): + ldp data1, data2, [src, 32]! +L(page_cross_entry): + sub tmp1, data1, zeroones + sub tmp3, data2, zeroones + orr tmp2, tmp1, tmp3 + tst tmp2, zeroones, lsl 7 + bne 1f + ldp data1, data2, [src, 16] + sub tmp1, data1, zeroones + sub tmp3, data2, zeroones + orr tmp2, tmp1, tmp3 + tst tmp2, zeroones, lsl 7 + beq L(main_loop) + add src, src, 16 +1: + /* The fast check failed, so do the slower, accurate NUL check. */ + orr tmp2, data1, REP8_7f + orr tmp4, data2, REP8_7f + bics has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + ccmp has_nul2, 0, 0, eq + beq L(nonascii_loop) + + /* Enter with C = has_nul1 == 0. */ +L(tail): +#ifdef __AARCH64EB__ + /* For big-endian, carry propagation (if the final byte in the + string is 0x01) means we cannot use has_nul1/2 directly. The + easiest way to get the correct byte is to byte-swap the data + and calculate the syndrome a second time. */ + csel data1, data1, data2, cc + rev data1, data1 + sub tmp1, data1, zeroones + orr tmp2, data1, REP8_7f + bic has_nul1, tmp1, tmp2 +#else + csel has_nul1, has_nul1, has_nul2, cc +#endif + sub len, src, srcin + rev has_nul1, has_nul1 + add tmp2, len, 8 + clz tmp1, has_nul1 + csel len, len, tmp2, cc + add len, len, tmp1, lsr 3 + ret + +L(nonascii_loop): + ldp data1, data2, [src, 16]! + sub tmp1, data1, zeroones + orr tmp2, data1, REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, REP8_7f + bics has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + ccmp has_nul2, 0, 0, eq + bne L(tail) + ldp data1, data2, [src, 16]! + sub tmp1, data1, zeroones + orr tmp2, data1, REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, REP8_7f + bics has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + ccmp has_nul2, 0, 0, eq + beq L(nonascii_loop) + b L(tail) + + /* Load 16 bytes from [srcin & ~15] and force the bytes that precede + srcin to 0x7f, so we ignore any NUL bytes before the string. + Then continue in the aligned loop. */ +L(page_cross): + bic src, srcin, 15 + ldp data1, data2, [src] + lsl tmp1, srcin, 3 + mov tmp4, -1 +#ifdef __AARCH64EB__ + /* Big-endian. Early bytes are at MSB. */ + lsr tmp1, tmp4, tmp1 /* Shift (tmp1 & 63). */ +#else + /* Little-endian. Early bytes are at LSB. */ + lsl tmp1, tmp4, tmp1 /* Shift (tmp1 & 63). */ +#endif + orr tmp1, tmp1, REP8_80 + orn data1, data1, tmp1 + orn tmp2, data2, tmp1 + tst srcin, 8 + csel data1, data1, tmp4, eq + csel data2, data2, tmp2, eq + b L(page_cross_entry) +SYM_FUNC_END(__pi_strlen) +SYM_FUNC_ALIAS_WEAK(strlen, __pi_strlen) +EXPORT_SYMBOL_NOKASAN(strlen) -- cgit v1.3.1