From 34ff636f322c6d5e4f0a52338fa63a7dff09a495 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Sat, 18 Jul 2026 13:15:36 -0400 Subject: scftorture: Count single_rpc offline failures in statistics output scf_torture_stats_print() aggregates each invoker thread's counters into a local scf_statistics structure before printing, but the n_single_rpc_ofl field is missing from the aggregation loop. As a result, the "single_rpc_ofl" value printed in the statistics line is always zero, even when smp_call_function_single() invocations for the RPC test have failed due to offline CPUs and been counted by the invoker threads. Add the missing accumulation so that the printed value reflects the actual counts. Signed-off-by: Joel Fernandes Signed-off-by: Paul E. McKenney --- arch/arc/mm/init.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 arch/arc/mm/init.c (limited to 'arch/arc/mm/init.c') diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c new file mode 100644 index 000000000..d6b5c27a0 --- /dev/null +++ b/arch/arc/mm/init.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include +#include +#include +#ifdef CONFIG_BLK_DEV_INITRD +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE); + +static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE; +static unsigned long low_mem_sz; + +#ifdef CONFIG_HIGHMEM +static unsigned long min_high_pfn, max_high_pfn; +static phys_addr_t high_mem_start; +static phys_addr_t high_mem_sz; +unsigned long arch_pfn_offset; +EXPORT_SYMBOL(arch_pfn_offset); +#endif + +long __init arc_get_mem_sz(void) +{ + return low_mem_sz; +} + +/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ +static int __init setup_mem_sz(char *str) +{ + low_mem_sz = memparse(str, NULL) & PAGE_MASK; + + /* early console might not be setup yet - it will show up later */ + pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz)); + + return 0; +} +early_param("mem", setup_mem_sz); + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + int in_use = 0; + + if (!low_mem_sz) { + if (base != low_mem_start) + panic("CONFIG_LINUX_RAM_BASE != DT memory { }"); + + low_mem_sz = size; + in_use = 1; + memblock_add_node(base, size, 0, MEMBLOCK_NONE); + } else { +#ifdef CONFIG_HIGHMEM + high_mem_start = base; + high_mem_sz = size; + in_use = 1; + memblock_add_node(base, size, 1, MEMBLOCK_NONE); + memblock_reserve(base, size); +#endif + } + + pr_info("Memory @ %llx [%lldM] %s\n", + base, TO_MB(size), !in_use ? "Not used":""); +} + +void __init arch_zone_limits_init(unsigned long *max_zone_pfn) +{ + /*----------------- node/zones setup --------------------------*/ + max_zone_pfn[ZONE_NORMAL] = max_low_pfn; + +#ifdef CONFIG_HIGHMEM + /* + * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE. + * For HIGHMEM without PAE max_high_pfn should be less than + * min_low_pfn to guarantee that these two regions don't overlap. + * For PAE case highmem is greater than lowmem, so it is natural + * to use max_high_pfn. + * + * In both cases, holes should be handled by pfn_valid(). + */ + max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn; +#endif +} + +/* + * First memory setup routine called from setup_arch() + * 1. setup swapper's mm @init_mm + * 2. Count the pages we have and setup bootmem allocator + * 3. zone setup + */ +void __init setup_arch_memory(void) +{ + setup_initial_init_mm(_text, _etext, _edata, _end); + + /* first page of system - kernel .vector starts here */ + min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE); + + /* Last usable page of low mem */ + max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); + + /*------------- bootmem allocator setup -----------------------*/ + + /* + * seed the bootmem allocator after any DT memory node parsing or + * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz + * + * Only low mem is added, otherwise we have crashes when allocating + * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of + * avail memory, ending in highmem with a > 32-bit address. However + * it then tries to memset it with a truncaed 32-bit handle, causing + * the crash + */ + + memblock_reserve(CONFIG_LINUX_LINK_BASE, + __pa(_end) - CONFIG_LINUX_LINK_BASE); + +#ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size) { + memblock_reserve(phys_initrd_start, phys_initrd_size); + initrd_start = (unsigned long)__va(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } +#endif + + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + + memblock_dump_all(); + +#ifdef CONFIG_HIGHMEM + /* + * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based) + * than addresses in normal aka low memory (0x8000_0000 based). + * Even with PAE, the huge peripheral space hole would waste a lot of + * mem with single contiguous mem_map[]. + * Thus when HIGHMEM on ARC is enabled the memory map corresponding + * to the hole is freed and ARC specific version of pfn_valid() + * handles the hole in the memory map. + */ + + min_high_pfn = PFN_DOWN(high_mem_start); + max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz); + + arch_pfn_offset = min(min_low_pfn, min_high_pfn); + kmap_init(); +#endif /* CONFIG_HIGHMEM */ +} + +void __init arch_mm_preinit(void) +{ +#ifdef CONFIG_HIGHMEM + memblock_phys_free(high_mem_start, high_mem_sz); +#endif + + BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE); +} + +#ifdef CONFIG_HIGHMEM +int pfn_valid(unsigned long pfn) +{ + return (pfn >= min_high_pfn && pfn <= max_high_pfn) || + (pfn >= min_low_pfn && pfn <= max_low_pfn); +} +EXPORT_SYMBOL(pfn_valid); +#endif -- cgit v1.3.1