From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/arc/lib/strcmp.S | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 arch/arc/lib/strcmp.S (limited to 'arch/arc/lib/strcmp.S') diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S new file mode 100644 index 000000000..b20c98fb3 --- /dev/null +++ b/arch/arc/lib/strcmp.S @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* This is optimized primarily for the ARC700. + It would be possible to speed up the loops by one cycle / word + respective one cycle / byte by forcing double source 1 alignment, unrolling + by a factor of two, and speculatively loading the second word / byte of + source 1; however, that would increase the overhead for loop setup / finish, + and strcmp might often terminate early. */ + +#include + +ENTRY_CFI(strcmp) + or r2,r0,r1 + bmsk_s r2,r2,1 + brne r2,0,.Lcharloop + mov_s r12,0x01010101 + ror r5,r12 +.Lwordloop: + ld.ab r2,[r0,4] + ld.ab r3,[r1,4] + nop_s + sub r4,r2,r12 + bic r4,r4,r2 + and r4,r4,r5 + brne r4,0,.Lfound0 + breq r2,r3,.Lwordloop +#ifdef __LITTLE_ENDIAN__ + xor r0,r2,r3 ; mask for difference + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 +#endif /* LITTLE ENDIAN */ + cmp_s r2,r3 + mov_s r0,1 + j_s.d [blink] + bset.lo r0,r0,31 + + .balign 4 +#ifdef __LITTLE_ENDIAN__ +.Lfound0: + xor r0,r2,r3 ; mask for difference + or r0,r0,r4 ; or in zero indicator + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 + sub.f r0,r2,r3 + mov.hi r0,1 + j_s.d [blink] + bset.lo r0,r0,31 +#else /* BIG ENDIAN */ + /* The zero-detection above can mis-detect 0x01 bytes as zeroes + because of carry-propagateion from a lower significant zero byte. + We can compensate for this by checking that bit0 is zero. + This compensation is not necessary in the step where we + get a low estimate for r2, because in any affected bytes + we already have 0x00 or 0x01, which will remain unchanged + when bit 7 is cleared. */ + .balign 4 +.Lfound0: + lsr r0,r4,8 + lsr_s r1,r2 + bic_s r2,r2,r0 ; get low estimate for r2 and get ... + bic_s r0,r0,r1 ; + or_s r3,r3,r0 ; ... high estimate r3 so that r2 > r3 will ... + cmp_s r3,r2 ; ... be independent of trailing garbage + or_s r2,r2,r0 ; likewise for r3 > r2 + bic_s r3,r3,r0 + rlc r0,0 ; r0 := r2 > r3 ? 1 : 0 + cmp_s r2,r3 + j_s.d [blink] + bset.lo r0,r0,31 +#endif /* ENDIAN */ + + .balign 4 +.Lcharloop: + ldb.ab r2,[r0,1] + ldb.ab r3,[r1,1] + nop_s + breq r2,0,.Lcmpend + breq r2,r3,.Lcharloop +.Lcmpend: + j_s.d [blink] + sub r0,r2,r3 +END_CFI(strcmp) -- cgit v1.3.1