From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- .../userspace-api/netlink/netlink-raw.rst | 194 +++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 Documentation/userspace-api/netlink/netlink-raw.rst (limited to 'Documentation/userspace-api/netlink/netlink-raw.rst') diff --git a/Documentation/userspace-api/netlink/netlink-raw.rst b/Documentation/userspace-api/netlink/netlink-raw.rst new file mode 100644 index 000000000..aae296c17 --- /dev/null +++ b/Documentation/userspace-api/netlink/netlink-raw.rst @@ -0,0 +1,194 @@ +.. SPDX-License-Identifier: BSD-3-Clause + +====================================================== +Netlink specification support for raw Netlink families +====================================================== + +This document describes the additional properties required by raw Netlink +families such as ``NETLINK_ROUTE`` which use the ``netlink-raw`` protocol +specification. + +Specification +============= + +The netlink-raw schema extends the :doc:`genetlink-legacy ` +schema with properties that are needed to specify the protocol numbers and +multicast IDs used by raw netlink families. See :ref:`classic_netlink` for more +information. The raw netlink families also make use of type-specific +sub-messages. + +Globals +------- + +protonum +~~~~~~~~ + +The ``protonum`` property is used to specify the protocol number to use when +opening a netlink socket. + +.. code-block:: yaml + + # SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + + name: rt-addr + protocol: netlink-raw + protonum: 0 # part of the NETLINK_ROUTE protocol + + +Multicast group properties +-------------------------- + +value +~~~~~ + +The ``value`` property is used to specify the group ID to use for multicast +group registration. + +.. code-block:: yaml + + mcast-groups: + list: + - + name: rtnlgrp-ipv4-ifaddr + value: 5 + - + name: rtnlgrp-ipv6-ifaddr + value: 9 + - + name: rtnlgrp-mctp-ifaddr + value: 34 + +Sub-messages +------------ + +Several raw netlink families such as +:ref:`rt-link` and +:ref:`tc` use attribute nesting as an +abstraction to carry module specific information. + +Conceptually it looks as follows:: + + [OUTER NEST OR MESSAGE LEVEL] + [GENERIC ATTR 1] + [GENERIC ATTR 2] + [GENERIC ATTR 3] + [GENERIC ATTR - wrapper] + [MODULE SPECIFIC ATTR 1] + [MODULE SPECIFIC ATTR 2] + +The ``GENERIC ATTRs`` at the outer level are defined in the core (or rt_link or +core TC), while specific drivers, TC classifiers, qdiscs etc. can carry their +own information wrapped in the ``GENERIC ATTR - wrapper``. Even though the +example above shows attributes nesting inside the wrapper, the modules generally +have full freedom to define the format of the nest. In practice the payload of +the wrapper attr has very similar characteristics to a netlink message. It may +contain a fixed header / structure, netlink attributes, or both. Because of +those shared characteristics we refer to the payload of the wrapper attribute as +a sub-message. + +A sub-message attribute uses the value of another attribute as a selector key to +choose the right sub-message format. For example if the following attribute has +already been decoded: + +.. code-block:: json + + { "kind": "gre" } + +and we encounter the following attribute spec: + +.. code-block:: yaml + + - + name: data + type: sub-message + sub-message: linkinfo-data-msg + selector: kind + +Then we look for a sub-message definition called ``linkinfo-data-msg`` and use +the value of the ``kind`` attribute i.e. ``gre`` as the key to choose the +correct format for the sub-message: + +.. code-block:: yaml + + sub-messages: + name: linkinfo-data-msg + formats: + - + value: bridge + attribute-set: linkinfo-bridge-attrs + - + value: gre + attribute-set: linkinfo-gre-attrs + - + value: geneve + attribute-set: linkinfo-geneve-attrs + +This would decode the attribute value as a sub-message with the attribute-set +called ``linkinfo-gre-attrs`` as the attribute space. + +A sub-message can have an optional ``fixed-header`` followed by zero or more +attributes from an ``attribute-set``. For example the following +``tc-options-msg`` sub-message defines message formats that use a mixture of +``fixed-header``, ``attribute-set`` or both together: + +.. code-block:: yaml + + sub-messages: + - + name: tc-options-msg + formats: + - + value: bfifo + fixed-header: tc-fifo-qopt + - + value: cake + attribute-set: tc-cake-attrs + - + value: netem + fixed-header: tc-netem-qopt + attribute-set: tc-netem-attrs + +Note that a selector attribute must appear in a netlink message before any +sub-message attributes that depend on it. + +If an attribute such as ``kind`` is defined at more than one nest level, then a +sub-message selector will be resolved using the value 'closest' to the selector. +For example, if the same attribute name is defined in a nested ``attribute-set`` +alongside a sub-message selector and also in a top level ``attribute-set``, then +the selector will be resolved using the value 'closest' to the selector. If the +value is not present in the message at the same level as defined in the spec +then this is an error. + +Nested struct definitions +------------------------- + +Many raw netlink families such as :ref:`tc` +make use of nested struct definitions. The ``netlink-raw`` schema makes it +possible to embed a struct within a struct definition using the ``struct`` +property. For example, the following struct definition embeds the +``tc-ratespec`` struct definition for both the ``rate`` and the ``peakrate`` +members of ``struct tc-tbf-qopt``. + +.. code-block:: yaml + + - + name: tc-tbf-qopt + type: struct + members: + - + name: rate + type: binary + struct: tc-ratespec + - + name: peakrate + type: binary + struct: tc-ratespec + - + name: limit + type: u32 + - + name: buffer + type: u32 + - + name: mtu + type: u32 -- cgit v1.3.1