From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/trace/sys-t.rst | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/trace/sys-t.rst (limited to 'Documentation/trace/sys-t.rst') diff --git a/Documentation/trace/sys-t.rst b/Documentation/trace/sys-t.rst new file mode 100644 index 000000000..3d8eb9273 --- /dev/null +++ b/Documentation/trace/sys-t.rst @@ -0,0 +1,62 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +MIPI SyS-T over STP +=================== + +The MIPI SyS-T protocol driver can be used with STM class devices to +generate standardized trace stream. Aside from being a standard, it +provides better trace source identification and timestamp correlation. + +In order to use the MIPI SyS-T protocol driver with your STM device, +first, you'll need CONFIG_STM_PROTO_SYS_T. + +Now, you can select which protocol driver you want to use when you create +a policy for your STM device, by specifying it in the policy name: + +# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/ + +In other words, the policy name format is extended like this: + + :. + +With Intel TH, therefore it can look like "0-sth:p_sys-t.my-policy". + +If the protocol name is omitted, the STM class will chose whichever +protocol driver was loaded first. + +You can also double check that everything is working as expected by + +# cat /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/protocol +p_sys-t + +Now, with the MIPI SyS-T protocol driver, each policy node in the +configfs gets a few additional attributes, which determine per-source +parameters specific to the protocol: + +# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default +# ls /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default +channels +clocksync_interval +do_len +masters +ts_interval +uuid + +The most important one here is the "uuid", which determines the UUID +that will be used to tag all data coming from this source. It is +automatically generated when a new node is created, but it is likely +that you would want to change it. + +do_len switches on/off the additional "payload length" field in the +MIPI SyS-T message header. It is off by default as the STP already +marks message boundaries. + +ts_interval and clocksync_interval determine how much time in milliseconds +can pass before we need to include a protocol (not transport, aka STP) +timestamp in a message header or send a CLOCKSYNC packet, respectively. + +See Documentation/ABI/testing/configfs-stp-policy-p_sys-t for more +details. + +* [1] https://www.mipi.org/specifications/sys-t -- cgit v1.3.1