From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- Documentation/trace/sys-t.rst | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/trace/sys-t.rst (limited to 'Documentation/trace/sys-t.rst') diff --git a/Documentation/trace/sys-t.rst b/Documentation/trace/sys-t.rst new file mode 100644 index 000000000..3d8eb9273 --- /dev/null +++ b/Documentation/trace/sys-t.rst @@ -0,0 +1,62 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +MIPI SyS-T over STP +=================== + +The MIPI SyS-T protocol driver can be used with STM class devices to +generate standardized trace stream. Aside from being a standard, it +provides better trace source identification and timestamp correlation. + +In order to use the MIPI SyS-T protocol driver with your STM device, +first, you'll need CONFIG_STM_PROTO_SYS_T. + +Now, you can select which protocol driver you want to use when you create +a policy for your STM device, by specifying it in the policy name: + +# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/ + +In other words, the policy name format is extended like this: + + :. + +With Intel TH, therefore it can look like "0-sth:p_sys-t.my-policy". + +If the protocol name is omitted, the STM class will chose whichever +protocol driver was loaded first. + +You can also double check that everything is working as expected by + +# cat /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/protocol +p_sys-t + +Now, with the MIPI SyS-T protocol driver, each policy node in the +configfs gets a few additional attributes, which determine per-source +parameters specific to the protocol: + +# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default +# ls /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default +channels +clocksync_interval +do_len +masters +ts_interval +uuid + +The most important one here is the "uuid", which determines the UUID +that will be used to tag all data coming from this source. It is +automatically generated when a new node is created, but it is likely +that you would want to change it. + +do_len switches on/off the additional "payload length" field in the +MIPI SyS-T message header. It is off by default as the STP already +marks message boundaries. + +ts_interval and clocksync_interval determine how much time in milliseconds +can pass before we need to include a protocol (not transport, aka STP) +timestamp in a message header or send a CLOCKSYNC packet, respectively. + +See Documentation/ABI/testing/configfs-stp-policy-p_sys-t for more +details. + +* [1] https://www.mipi.org/specifications/sys-t -- cgit v1.3.1