From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 24 Aug 2026 08:46:03 -0700
Subject: Merge tag 'pinctrl-v7.3-1' of
 git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...
---
 Documentation/trace/function-graph-fold.vim | 42 +++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/trace/function-graph-fold.vim

(limited to 'Documentation/trace/function-graph-fold.vim')

diff --git a/Documentation/trace/function-graph-fold.vim b/Documentation/trace/function-graph-fold.vim
new file mode 100644
index 000000000..0544b504c
--- /dev/null
+++ b/Documentation/trace/function-graph-fold.vim
@@ -0,0 +1,42 @@
+" Enable folding for ftrace function_graph traces.
+"
+" To use, :source this file while viewing a function_graph trace, or use vim's
+" -S option to load from the command-line together with a trace.  You can then
+" use the usual vim fold commands, such as "za", to open and close nested
+" functions.  While closed, a fold will show the total time taken for a call,
+" as would normally appear on the line with the closing brace.  Folded
+" functions will not include finish_task_switch(), so folding should remain
+" relatively sane even through a context switch.
+"
+" Note that this will almost certainly only work well with a
+" single-CPU trace (e.g. trace-cmd report --cpu 1).
+
+function! FunctionGraphFoldExpr(lnum)
+  let line = getline(a:lnum)
+  if line[-1:] == '{'
+    if line =~ 'finish_task_switch() {$'
+      return '>1'
+    endif
+    return 'a1'
+  elseif line[-1:] == '}'
+    return 's1'
+  else
+    return '='
+  endif
+endfunction
+
+function! FunctionGraphFoldText()
+  let s = split(getline(v:foldstart), '|', 1)
+  if getline(v:foldend+1) =~ 'finish_task_switch() {$'
+    let s[2] = ' task switch  '
+  else
+    let e = split(getline(v:foldend), '|', 1)
+    let s[2] = e[2]
+  endif
+  return join(s, '|')
+endfunction
+
+setlocal foldexpr=FunctionGraphFoldExpr(v:lnum)
+setlocal foldtext=FunctionGraphFoldText()
+setlocal foldcolumn=12
+setlocal foldmethod=expr
-- 
cgit v1.3.1