From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/power/drivers-testing.rst | 52 +++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/power/drivers-testing.rst (limited to 'Documentation/power/drivers-testing.rst') diff --git a/Documentation/power/drivers-testing.rst b/Documentation/power/drivers-testing.rst new file mode 100644 index 000000000..d77d2894f --- /dev/null +++ b/Documentation/power/drivers-testing.rst @@ -0,0 +1,52 @@ +==================================================== +Testing suspend and resume support in device drivers +==================================================== + + (C) 2007 Rafael J. Wysocki , GPL + +1. Preparing the test system +============================ + +Unfortunately, to effectively test the support for the system-wide suspend and +resume transitions in a driver, it is necessary to suspend and resume a fully +functional system with this driver loaded. Moreover, that should be done +several times, preferably several times in a row, and separately for hibernation +(aka suspend to disk or STD) and suspend to RAM (STR), because each of these +cases involves slightly different operations and different interactions with +the machine's BIOS. + +Of course, for this purpose the test system has to be known to suspend and +resume without the driver being tested. Thus, if possible, you should first +resolve all suspend/resume-related problems in the test system before you start +testing the new driver. Please see Documentation/power/basic-pm-debugging.rst +for more information about the debugging of suspend/resume functionality. + +2. Testing the driver +===================== + +Once you have resolved the suspend/resume-related problems with your test system +without the new driver, you are ready to test it: + +a) Build the driver as a module, load it and try the test modes of hibernation + (see: Documentation/power/basic-pm-debugging.rst, 1). + +b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and + "platform" modes (see: Documentation/power/basic-pm-debugging.rst, 1). + +c) Compile the driver directly into the kernel and try the test modes of + hibernation. + +d) Attempt to hibernate with the driver compiled directly into the kernel + in the "reboot", "shutdown" and "platform" modes. + +e) Try the test modes of suspend (see: + Documentation/power/basic-pm-debugging.rst, 2). [As far as the STR tests are + concerned, it should not matter whether or not the driver is built as a + module.] + +f) Attempt to suspend to RAM using the s2ram tool with the driver loaded + (see: Documentation/power/basic-pm-debugging.rst, 2). + +Each of the above tests should be repeated several times and the STD tests +should be mixed with the STR tests. If any of them fails, the driver cannot be +regarded as suspend/resume-safe. -- cgit v1.3.1