From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/networking/seg6-sysctl.rst | 42 ++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/networking/seg6-sysctl.rst (limited to 'Documentation/networking/seg6-sysctl.rst') diff --git a/Documentation/networking/seg6-sysctl.rst b/Documentation/networking/seg6-sysctl.rst new file mode 100644 index 000000000..1b6af4779 --- /dev/null +++ b/Documentation/networking/seg6-sysctl.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Seg6 Sysfs variables +==================== + + +/proc/sys/net/conf//seg6_* variables: +============================================ + +seg6_enabled - BOOL + Accept or drop SR-enabled IPv6 packets on this interface. + + Relevant packets are those with SRH present and DA = local. + + * 0 - disabled (default) + * not 0 - enabled + +seg6_require_hmac - INTEGER + Define HMAC policy for ingress SR-enabled packets on this interface. + + * -1 - Ignore HMAC field + * 0 - Accept SR packets without HMAC, validate SR packets with HMAC + * 1 - Drop SR packets without HMAC, validate SR packets with HMAC + + Default is 0. + +/proc/sys/net/ipv6/seg6_* variables: +==================================== + +seg6_flowlabel - INTEGER + Controls the behaviour of computing the flowlabel of outer + IPv6 header in case of SR T.encaps + + == ======================================================= + -1 set flowlabel to zero. + 0 copy flowlabel from Inner packet in case of Inner IPv6 + (Set flowlabel to 0 in case IPv4/L2) + 1 Compute the flowlabel using seg6_make_flowlabel() + == ======================================================= + + Default is 0. -- cgit v1.3.1