From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/networking/failover.rst | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/networking/failover.rst (limited to 'Documentation/networking/failover.rst') diff --git a/Documentation/networking/failover.rst b/Documentation/networking/failover.rst new file mode 100644 index 000000000..f0c8483cd --- /dev/null +++ b/Documentation/networking/failover.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======== +FAILOVER +======== + +Overview +======== + +The failover module provides a generic interface for paravirtual drivers +to register a netdev and a set of ops with a failover instance. The ops +are used as event handlers that get called to handle netdev register/ +unregister/link change/name change events on slave pci ethernet devices +with the same mac address as the failover netdev. + +This enables paravirtual drivers to use a VF as an accelerated low latency +datapath. It also allows live migration of VMs with direct attached VFs by +failing over to the paravirtual datapath when the VF is unplugged. -- cgit v1.3.1