From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- Documentation/networking/driver.rst | 143 ++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/networking/driver.rst (limited to 'Documentation/networking/driver.rst') diff --git a/Documentation/networking/driver.rst b/Documentation/networking/driver.rst new file mode 100644 index 000000000..920c0ec98 --- /dev/null +++ b/Documentation/networking/driver.rst @@ -0,0 +1,143 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +Softnet Driver Issues +===================== + +Probing guidelines +================== + +Address validation +------------------ + +Any hardware layer address you obtain for your device should +be verified. For example, for ethernet check it with +linux/etherdevice.h:is_valid_ether_addr() + +Close/stop guidelines +===================== + +Quiescence +---------- + +After the ndo_stop routine has been called, the hardware must +not receive or transmit any data. All in flight packets must +be aborted. If necessary, poll or wait for completion of +any reset commands. + +Auto-close +---------- + +The ndo_stop routine will be called by unregister_netdevice +if device is still UP. + +Transmit path guidelines +======================== + +Stop queues in advance +---------------------- + +The ndo_start_xmit method must not return NETDEV_TX_BUSY under +any normal circumstances. It is considered a hard error unless +there is no way your device can tell ahead of time when its +transmit function will become busy. + +Instead it must maintain the queue properly. For example, +for a driver implementing scatter-gather this means: + +.. code-block:: c + + static u32 drv_tx_avail(struct drv_ring *dr) + { + u32 used = READ_ONCE(dr->prod) - READ_ONCE(dr->cons); + + return dr->tx_ring_size - (used & dr->tx_ring_mask); + } + + static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) + { + struct drv *dp = netdev_priv(dev); + struct netdev_queue *txq; + struct drv_ring *dr; + int idx; + + idx = skb_get_queue_mapping(skb); + dr = dp->tx_rings[idx]; + txq = netdev_get_tx_queue(dev, idx); + + //... + /* This should be a very rare race - log it. */ + if (drv_tx_avail(dr) <= skb_shinfo(skb)->nr_frags + 1) { + netif_tx_stop_queue(txq); + netdev_warn(dev, "Tx Ring full when queue awake!\n"); + return NETDEV_TX_BUSY; + } + + //... queue packet to card ... + + netdev_tx_sent_queue(txq, skb->len); + + //... update tx producer index using WRITE_ONCE() ... + + if (!netif_txq_maybe_stop(txq, drv_tx_avail(dr), + MAX_SKB_FRAGS + 1, 2 * MAX_SKB_FRAGS)) + dr->stats.stopped++; + + //... + return NETDEV_TX_OK; + } + +And then at the end of your TX reclamation event handling: + +.. code-block:: c + + //... update tx consumer index using WRITE_ONCE() ... + + netif_txq_completed_wake(txq, cmpl_pkts, cmpl_bytes, + drv_tx_avail(dr), 2 * MAX_SKB_FRAGS); + +Lockless queue stop / wake helper macros +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: include/net/netdev_queues.h + :doc: Lockless queue stopping / waking helpers. + +The standard macros like netif_txq_maybe_stop(), netif_txq_try_stop() etc. +are well tested, prefer them over local synchronization schemes. + +No exclusive ownership +---------------------- + +An ndo_start_xmit method must not modify the shared parts of a +cloned SKB. + +Timely completions +------------------ + +Do not forget that once you return NETDEV_TX_OK from your +ndo_start_xmit method, it is your driver's responsibility to free +up the SKB and in some finite amount of time. + +For example, this means that it is not allowed for your TX +mitigation scheme to let TX packets "hang out" in the TX +ring unreclaimed forever if no new TX packets are sent. +This error can deadlock sockets waiting for send buffer room +to be freed up. + +If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you +must not keep any reference to that SKB and you must not attempt +to free it up. + +Error message reporting +======================= + +A number of driver configuration interfaces pass a Netlink extended ACK +(``extack``) object to the driver (either directly as an argument or +as a member of a parameter struct). The drivers should try to report +most errors via the ``extack`` object. System level exceptions, +indicating that system or device is misbehaving or is in bad state, +should continue to be reported to system logs. + +Messages should be passed **either** via ``extack`` **or** to system logs. +Drivers should not try to report the same information to both. -- cgit v1.3.1