From e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1 Mon Sep 17 00:00:00 2001 From: Salah Triki Date: Thu, 17 Sep 2026 14:00:52 +0100 Subject: iio: proximity: isl29501: Fix return type of isl29501_register_write isl29501_register_write() was returning a u32 instead of an int. Since the function returns negative error codes (such as -ERANGE or return values from i2c_smbus_write_byte_data()), returning an unsigned integer type prevents callers from correctly checking for negative error conditions. Fix this by changing the function return type from u32 to int. This was found through manual code review. Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.") Signed-off-by: Salah Triki Reviewed-by: Joshua Crofts Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/networking/alias.rst | 49 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/networking/alias.rst (limited to 'Documentation/networking/alias.rst') diff --git a/Documentation/networking/alias.rst b/Documentation/networking/alias.rst new file mode 100644 index 000000000..af7c5ee92 --- /dev/null +++ b/Documentation/networking/alias.rst @@ -0,0 +1,49 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +IP-Aliasing +=========== + +IP-aliases are an obsolete way to manage multiple IP-addresses/masks +per interface. Newer tools such as iproute2 support multiple +address/prefixes per interface, but aliases are still supported +for backwards compatibility. + +An alias is formed by adding a colon and a string when running ifconfig. +This string is usually numeric, but this is not a must. + + +Alias creation +============== + +Alias creation is done by 'magic' interface naming: eg. to create a +200.1.1.1 alias for eth0 ... +:: + + # ifconfig eth0:0 200.1.1.1 etc,etc.... + ~~ -> request alias #0 creation (if not yet exists) for eth0 + +The corresponding route is also set up by this command. Please note: +The route always points to the base interface. + + +Alias deletion +============== + +The alias is removed by shutting the alias down:: + + # ifconfig eth0:0 down + ~~~~~~~~~~ -> will delete alias + + +Alias (re-)configuring +====================== + +Aliases are not real devices, but programs should be able to configure +and refer to them as usual (ifconfig, route, etc). + + +Relationship with main device +============================= + +If the base device is shut down the added aliases will be deleted too. -- cgit v1.3.1