From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/netlink/specs/dev-energymodel.yaml | 175 +++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 Documentation/netlink/specs/dev-energymodel.yaml (limited to 'Documentation/netlink/specs/dev-energymodel.yaml') diff --git a/Documentation/netlink/specs/dev-energymodel.yaml b/Documentation/netlink/specs/dev-energymodel.yaml new file mode 100644 index 000000000..11faabfdf --- /dev/null +++ b/Documentation/netlink/specs/dev-energymodel.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) +# +# Copyright (c) 2025 Valve Corporation. +# +--- +name: dev-energymodel + +doc: | + Energy model netlink interface to notify its changes. + +protocol: genetlink + +uapi-header: linux/dev_energymodel.h + +definitions: + - + type: flags + name: perf-state-flags + entries: + - + name: perf-state-inefficient + doc: >- + The performance state is inefficient. There is in this perf-domain, + another performance state with a higher frequency but a lower or + equal power cost. + - + type: flags + name: perf-domain-flags + entries: + - + name: perf-domain-microwatts + doc: >- + The power values are in micro-Watts or some other scale. + - + name: perf-domain-skip-inefficiencies + doc: >- + Skip inefficient states when estimating energy consumption. + - + name: perf-domain-artificial + doc: >- + The power values are artificial and might be created by platform + missing real power information. + +attribute-sets: + - + name: perf-domain + doc: >- + Information on a single performance domains. + attributes: + - + name: pad + type: pad + - + name: perf-domain-id + type: u32 + doc: >- + A unique ID number for each performance domain. + - + name: flags + type: u64 + doc: >- + Bitmask of performance domain flags. + enum: perf-domain-flags + - + name: cpus + type: u64 + multi-attr: true + doc: >- + CPUs that belong to this performance domain. + - + name: perf-table + doc: >- + Performance states table. + attributes: + - + name: perf-domain-id + type: u32 + doc: >- + A unique ID number for each performance domain. + - + name: perf-state + type: nest + nested-attributes: perf-state + multi-attr: true + - + name: perf-state + doc: >- + Performance state of a performance domain. + attributes: + - + name: pad + type: pad + - + name: performance + type: u64 + doc: >- + CPU performance (capacity) at a given frequency. + - + name: frequency + type: u64 + doc: >- + The frequency in KHz, for consistency with CPUFreq. + - + name: power + type: u64 + doc: >- + The power consumed at this level (by 1 CPU or by a registered + device). It can be a total power: static and dynamic. + - + name: cost + type: u64 + doc: >- + The cost coefficient associated with this level, used during energy + calculation. Equal to: power * max_frequency / frequency. + - + name: flags + type: u64 + doc: >- + Bitmask of performance state flags. + enum: perf-state-flags + +operations: + list: + - + name: get-perf-domains + attribute-set: perf-domain + doc: Get the list of information for all performance domains. + do: + request: + attributes: + - perf-domain-id + reply: + attributes: &perf-domain-attrs + - pad + - perf-domain-id + - flags + - cpus + dump: + reply: + attributes: *perf-domain-attrs + - + name: get-perf-table + attribute-set: perf-table + doc: Get the energy model table of a performance domain. + do: + request: + attributes: + - perf-domain-id + reply: + attributes: + - perf-domain-id + - perf-state + - + name: perf-domain-created + doc: A performance domain is created. + notify: get-perf-table + mcgrp: event + - + name: perf-domain-updated + doc: A performance domain is updated. + notify: get-perf-table + mcgrp: event + - + name: perf-domain-deleted + doc: A performance domain is deleted. + attribute-set: perf-table + event: + attributes: + - perf-domain-id + mcgrp: event + +mcast-groups: + list: + - + name: event -- cgit v1.3.1