From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- Documentation/i2c/old-module-parameters.rst | 55 +++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/i2c/old-module-parameters.rst (limited to 'Documentation/i2c/old-module-parameters.rst') diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst new file mode 100644 index 000000000..b08b6daab --- /dev/null +++ b/Documentation/i2c/old-module-parameters.rst @@ -0,0 +1,55 @@ +================================================================ +I2C device driver binding control from user-space in old kernels +================================================================ + +.. NOTE:: + Note: this section is only relevant if you are handling some old code + found in kernel 2.6. If you work with more recent kernels, you can + safely skip this section. + +Up to kernel 2.6.32, many I2C drivers used helper macros provided by + which created standard module parameters to let the user +control how the driver would probe I2C buses and attach to devices. These +parameters were known as ``probe`` (to let the driver probe for an extra +address), ``force`` (to forcibly attach the driver to a given device) and +``ignore`` (to prevent a driver from probing a given address). + +With the conversion of the I2C subsystem to the standard device driver +binding model, it became clear that these per-module parameters were no +longer needed, and that a centralized implementation was possible. The new, +sysfs-based interface is described in +Documentation/i2c/instantiating-devices.rst, section +"Method 4: Instantiate from user-space". + +Below is a mapping from the old module parameters to the new interface. + +Attaching a driver to an I2C device +----------------------------------- + +Old method (module parameters):: + + # modprobe probe=1,0x2d + # modprobe force=1,0x2d + # modprobe force_=1,0x2d + +New method (sysfs interface):: + + # echo 0x2d > /sys/bus/i2c/devices/i2c-1/new_device + +Preventing a driver from attaching to an I2C device +--------------------------------------------------- + +Old method (module parameters):: + + # modprobe ignore=1,0x2f + +New method (sysfs interface):: + + # echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe + +Of course, it is important to instantiate the ``dummy`` device before loading +the driver. The dummy device will be handled by i2c-core itself, preventing +other drivers from binding to it later on. If there is a real device at the +problematic address, and you want another driver to bind to it, then simply +pass the name of the device in question instead of ``dummy``. -- cgit v1.3.1