From 4617721c502b2ddaa4e324e86da4997edf738fa5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 2 Sep 2026 09:55:01 -0400 Subject: ftrace: Synchronize the initialization of ftrace_ops There's some internal state that ftrace_ops needs to have set, but since it can be declared outside of the ftrace.c code, it calls ftrace_ops_init() on the ops in every global function. The issue is that if two tasks call it on the same ops at the same time it is possible to have the initialization of one corrupt the initialization of the other call. Create a ops_mutex to use to synchronize every initialization of the ftrace_ops. The mutex is taken within checking the ftrace_ops flag that states it was initializied but the flag is checked again after the mutex has been taken. Checking first outside the mutex allows it to shortcut having to take the mutex. But then the check needs to be done again after the mute is taken in case of races. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock") Reported-by: sashiko-bot@kernel.org Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/ Signed-off-by: Steven Rostedt --- Documentation/i2c/functionality.rst | 156 ++++++++++++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100644 Documentation/i2c/functionality.rst (limited to 'Documentation/i2c/functionality.rst') diff --git a/Documentation/i2c/functionality.rst b/Documentation/i2c/functionality.rst new file mode 100644 index 000000000..377507c56 --- /dev/null +++ b/Documentation/i2c/functionality.rst @@ -0,0 +1,156 @@ +======================= +I2C/SMBus Functionality +======================= + +INTRODUCTION +------------ + +Because not every I2C or SMBus adapter implements everything in the +I2C specifications, a client can not trust that everything it needs +is implemented when it is given the option to attach to an adapter: +the client needs some way to check whether an adapter has the needed +functionality. + + +FUNCTIONALITY CONSTANTS +----------------------- + +For the most up-to-date list of functionality constants, please check +! + + =============================== ============================================== + I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus + adapters typically can not do these) + I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions + I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK, + I2C_M_REV_DIR_ADDR and I2C_M_NO_RD_ACK + flags (which modify the I2C protocol!) + I2C_FUNC_NOSTART Can skip repeated start sequence + I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command + I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command + I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command + I2C_FUNC_SMBUS_READ_BYTE_DATA Handles the SMBus read_byte_data command + I2C_FUNC_SMBUS_WRITE_BYTE_DATA Handles the SMBus write_byte_data command + I2C_FUNC_SMBUS_READ_WORD_DATA Handles the SMBus read_word_data command + I2C_FUNC_SMBUS_WRITE_WORD_DATA Handles the SMBus write_byte_data command + I2C_FUNC_SMBUS_PROC_CALL Handles the SMBus process_call command + I2C_FUNC_SMBUS_READ_BLOCK_DATA Handles the SMBus read_block_data command + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA Handles the SMBus write_block_data command + I2C_FUNC_SMBUS_READ_I2C_BLOCK Handles the SMBus read_i2c_block_data command + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK Handles the SMBus write_i2c_block_data command + =============================== ============================================== + +A few combinations of the above flags are also defined for your convenience: + + ========================= ====================================== + I2C_FUNC_SMBUS_BYTE Handles the SMBus read_byte + and write_byte commands + I2C_FUNC_SMBUS_BYTE_DATA Handles the SMBus read_byte_data + and write_byte_data commands + I2C_FUNC_SMBUS_WORD_DATA Handles the SMBus read_word_data + and write_word_data commands + I2C_FUNC_SMBUS_BLOCK_DATA Handles the SMBus read_block_data + and write_block_data commands + I2C_FUNC_SMBUS_I2C_BLOCK Handles the SMBus read_i2c_block_data + and write_i2c_block_data commands + I2C_FUNC_SMBUS_EMUL Handles all SMBus commands that can be + emulated by a real I2C adapter (using + the transparent emulation layer) + ========================= ====================================== + +In kernel versions prior to 3.5 I2C_FUNC_NOSTART was implemented as +part of I2C_FUNC_PROTOCOL_MANGLING. + + +ADAPTER IMPLEMENTATION +---------------------- + +When you write a new adapter driver, you will have to implement a +function callback ``functionality``. Typical implementations are given +below. + +A typical SMBus-only adapter would list all the SMBus transactions it +supports. This example comes from the i2c-piix4 driver:: + + static u32 piix4_func(struct i2c_adapter *adapter) + { + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; + } + +A typical full-I2C adapter would use the following (from the i2c-pxa +driver):: + + static u32 i2c_pxa_functionality(struct i2c_adapter *adap) + { + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + } + +I2C_FUNC_SMBUS_EMUL includes all the SMBus transactions (with the +addition of I2C block transactions) which i2c-core can emulate using +I2C_FUNC_I2C without any help from the adapter driver. The idea is +to let the client drivers check for the support of SMBus functions +without having to care whether the said functions are implemented in +hardware by the adapter, or emulated in software by i2c-core on top +of an I2C adapter. + + +CLIENT CHECKING +--------------- + +Before a client tries to attach to an adapter, or even do tests to check +whether one of the devices it supports is present on an adapter, it should +check whether the needed functionality is present. The typical way to do +this is (from the lm75 driver):: + + static int lm75_detect(...) + { + (...) + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + (...) + } + +Here, the lm75 driver checks if the adapter can do both SMBus byte data +and SMBus word data transactions. If not, then the driver won't work on +this adapter and there's no point in going on. If the check above is +successful, then the driver knows that it can call the following +functions: i2c_smbus_read_byte_data(), i2c_smbus_write_byte_data(), +i2c_smbus_read_word_data() and i2c_smbus_write_word_data(). As a rule of +thumb, the functionality constants you test for with +i2c_check_functionality() should match exactly the i2c_smbus_* functions +which you driver is calling. + +Note that the check above doesn't tell whether the functionalities are +implemented in hardware by the underlying adapter or emulated in +software by i2c-core. Client drivers don't have to care about this, as +i2c-core will transparently implement SMBus transactions on top of I2C +adapters. + + +CHECKING THROUGH /DEV +--------------------- + +If you try to access an adapter from a userspace program, you will have +to use the /dev interface. You will still have to check whether the +functionality you need is supported, of course. This is done using +the I2C_FUNCS ioctl. An example, adapted from the i2cdetect program, is +below:: + + int file; + if (file = open("/dev/i2c-0", O_RDWR) < 0) { + /* Some kind of error handling */ + exit(1); + } + if (ioctl(file, I2C_FUNCS, &funcs) < 0) { + /* Some kind of error handling */ + exit(1); + } + if (!(funcs & I2C_FUNC_SMBUS_QUICK)) { + /* Oops, the needed functionality (SMBus write_quick function) is + not available! */ + exit(1); + } + /* Now it is safe to use the SMBus write_quick command */ -- cgit v1.3.1