From a5bde5d8fde8a8cb28e59a672d5ddc5b9c1e7656 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 5 Aug 2026 07:52:36 -0700 Subject: workqueue: skip the node_nr_active update for non-unbound workqueues apply_wqattrs_commit() updates node_nr_active->max unconditionally. wq->node_nr_active[] is only allocated for unbound workqueues, so guard the call before per-cpu workqueues start using this path. No functional change: only unbound workqueues reach apply_wqattrs_*() today. Signed-off-by: Breno Leitao Signed-off-by: Tejun Heo --- Documentation/hwmon/tmp464.rst | 73 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/hwmon/tmp464.rst (limited to 'Documentation/hwmon/tmp464.rst') diff --git a/Documentation/hwmon/tmp464.rst b/Documentation/hwmon/tmp464.rst new file mode 100644 index 000000000..7596e7623 --- /dev/null +++ b/Documentation/hwmon/tmp464.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver tmp464 +==================== + +Supported chips: + + * Texas Instruments TMP464 + + Prefix: 'tmp464' + + Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html + + * Texas Instruments TMP468 + + Prefix: 'tmp468' + + Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html + +Authors: + + Agathe Porte + Guenter Roeck + +Description +----------- + +This driver implements support for Texas Instruments TMP464 and TMP468 +temperature sensor chips. TMP464 provides one local and four remote +sensors. TMP468 provides one local and eight remote sensors. +Temperature is measured in degrees Celsius. The chips are wired over +I2C/SMBus and specified over a temperature range of -40 to +125 degrees +Celsius. Resolution for both the local and remote channels is 0.0625 +degree C. + +The chips support only temperature measurements. The driver exports +temperature values, limits, and alarms via the following sysfs files: + +**temp[1-9]_input** + +**temp[1-9]_max** + +**temp[1-9]_max_hyst** + +**temp[1-9]_max_alarm** + +**temp[1-9]_crit** + +**temp[1-9]_crit_alarm** + +**temp[1-9]_crit_hyst** + +**temp[2-9]_offset** + +**temp[2-9]_fault** + +Each sensor can be individually disabled via Devicetree or from sysfs +via: + +**temp[1-9]_enable** + +If labels were specified in Devicetree, additional sysfs files will +be present: + +**temp[1-9]_label** + +The update interval is configurable with the following sysfs attribute. + +**update_interval** -- cgit v1.3.1