From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/gpu/amdgpu/ptl.rst | 94 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 Documentation/gpu/amdgpu/ptl.rst (limited to 'Documentation/gpu/amdgpu/ptl.rst') diff --git a/Documentation/gpu/amdgpu/ptl.rst b/Documentation/gpu/amdgpu/ptl.rst new file mode 100644 index 000000000..c7f16dea7 --- /dev/null +++ b/Documentation/gpu/amdgpu/ptl.rst @@ -0,0 +1,94 @@ +======================================= +Peak Tops Limiter (PTL) sysfs Interface +======================================= + +Overview +-------- +The Peak Tops Limiter (PTL) sysfs interface enables users to control and +configure the PTL feature for each GPU individually. All PTL-related +sysfs files are located under `/sys/class/drm/cardX/device/ptl/`, where +`X` is the GPU index. Through these files, users can enable or disable +PTL, set preferred data formats, and query supported formats for each GPU. + +PTL sysfs files +---------------- +The following files are available under `/sys/class/drm/cardX/device/ptl/`: + +- `ptl_enable` +- `ptl_format` +- `ptl_supported_formats` + +PTL Enable/Disable +------------------ +File: `ptl_enable` +Type: Read/Write (rw) + +Read: Returns the current PTL status as a string: `enabled` if PTL +is active, or `disabled` if inactive. + +Write: + +- Write `1` or `enabled` to enable PTL +- Write `0` or `disabled` to disable PTL + +Examples:: + + # Query PTL status + cat /sys/class/drm/card1/device/ptl/ptl_enable + # Output: enabled + + # Enable PTL + sudo bash -c "echo 1 > /sys/class/drm/card1/device/ptl/ptl_enable" + + # Disable PTL + sudo bash -c "echo 0 > /sys/class/drm/card1/device/ptl/ptl_enable" + +PTL Format (Preferred Data Formats) +----------------------------------- +File: `ptl_format` +Type: Read/Write (rw) + +Read: Returns the two preferred formats, e.g. `I8,F32`. + +Write: Accepts two formats separated by a comma, e.g. `I8,F32`. + +- Both formats must be supported and different. +- If an invalid format is provided (not supported, or both formats are the + same), the driver will return "write error: Invalid argument". + +Examples:: + + # Query PTL formats + cat /sys/class/drm/card1/device/ptl/ptl_format + # Output: I8,F32 + + # Set PTL formats + sudo bash -c "echo I8,F32 > /sys/class/drm/card1/device/ptl/ptl_format" + +Supported Formats +----------------- +File: `ptl_supported_formats` +Type: Read-only (r) + +Read: Returns a comma-separated list of supported formats, e.g. +`I8,F16,BF16,F32,F64`. + +Example:: + + # Check supported formats + cat /sys/class/drm/card1/device/ptl/ptl_supported_formats + # Output: I8,F16,BF16,F32,F64 + +Behavioral Notes +---------------- +- PTL formats can only be set when PTL is enabled. +- If PTL is disabled, `ptl_format` returns `N/A`. +- Only two formats can be set at a time, and they must be from the supported set and different.. +- All commands support per-GPU targeting. +- Root permission is required to enable/disable PTL or change formats. +- If the hardware does not support PTL, the PTL sysfs directory will not + be created. + +Implementation +-------------- +The PTL sysfs nodes are implemented in `drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c`. -- cgit v1.3.1