From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/gpu/amdgpu/process-isolation.rst | 60 ++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/gpu/amdgpu/process-isolation.rst (limited to 'Documentation/gpu/amdgpu/process-isolation.rst') diff --git a/Documentation/gpu/amdgpu/process-isolation.rst b/Documentation/gpu/amdgpu/process-isolation.rst new file mode 100644 index 000000000..03c4288aa --- /dev/null +++ b/Documentation/gpu/amdgpu/process-isolation.rst @@ -0,0 +1,60 @@ +.. _amdgpu-process-isolation: +.. SPDX-License-Identifier: GPL-2.0 + +========================= + AMDGPU Process Isolation +========================= + +The AMDGPU driver includes a feature that enables automatic process isolation on the graphics engine. This feature serializes access to the graphics engine and adds a cleaner shader which clears the Local Data Store (LDS) and General Purpose Registers (GPRs) between jobs. All processes using the GPU, including both graphics and compute workloads, are serialized when this feature is enabled. On GPUs that support partitionable graphics engines, this feature can be enabled on a per-partition basis. + +In addition, there is an interface to manually run the cleaner shader when the use of the GPU is complete. This may be preferable in some use cases, such as a single-user system where the login manager triggers the cleaner shader when the user logs out. + +Process Isolation +================= + +The `run_cleaner_shader` and `enforce_isolation` sysfs interfaces allow users to manually execute the cleaner shader and control the process isolation feature, respectively. + +Partition Handling +------------------ + +The `enforce_isolation` file in sysfs can be used to enable process isolation and automatic shader cleanup between processes. On GPUs that support graphics engine partitioning, this can be enabled per partition. The partition and its current setting (0 disabled, 1 enabled) can be read from sysfs. On GPUs that do not support graphics engine partitioning, only a single partition will be present. Writing 1 to the partition position enables enforce isolation, writing 0 disables it. + +Example of enabling enforce isolation on a GPU with multiple partitions: + +.. code-block:: console + + $ echo 1 0 1 0 > /sys/class/drm/card0/device/enforce_isolation + $ cat /sys/class/drm/card0/device/enforce_isolation + 1 0 1 0 + +The output indicates that enforce isolation is enabled on zeroth and second partition and disabled on first and third partition. + +For devices with a single partition or those that do not support partitions, there will be only one element: + +.. code-block:: console + + $ echo 1 > /sys/class/drm/card0/device/enforce_isolation + $ cat /sys/class/drm/card0/device/enforce_isolation + 1 + +Cleaner Shader Execution +======================== + +The driver can trigger a cleaner shader to clean up the LDS and GPR state on the graphics engine. When process isolation is enabled, this happens automatically between processes. In addition, there is a sysfs file to manually trigger cleaner shader execution. + +To manually trigger the execution of the cleaner shader, write `0` to the `run_cleaner_shader` sysfs file: + +.. code-block:: console + + $ echo 0 > /sys/class/drm/card0/device/run_cleaner_shader + +For multi-partition devices, you can specify the partition index when triggering the cleaner shader: + +.. code-block:: console + + $ echo 0 > /sys/class/drm/card0/device/run_cleaner_shader # For partition 0 + $ echo 1 > /sys/class/drm/card0/device/run_cleaner_shader # For partition 1 + $ echo 2 > /sys/class/drm/card0/device/run_cleaner_shader # For partition 2 + # ... and so on for each partition + +This command initiates the cleaner shader, which will run and complete before any new tasks are scheduled on the GPU. -- cgit v1.3.1