From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/fb/arkfb.rst | 68 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/fb/arkfb.rst (limited to 'Documentation/fb/arkfb.rst') diff --git a/Documentation/fb/arkfb.rst b/Documentation/fb/arkfb.rst new file mode 100644 index 000000000..aeca8773d --- /dev/null +++ b/Documentation/fb/arkfb.rst @@ -0,0 +1,68 @@ +======================================== +arkfb - fbdev driver for ARK Logic chips +======================================== + + +Supported Hardware +================== + + ARK 2000PV chip + ICS 5342 ramdac + + - only BIOS initialized VGA devices supported + - probably not working on big endian + + +Supported Features +================== + + * 4 bpp pseudocolor modes (with 18bit palette, two variants) + * 8 bpp pseudocolor mode (with 18bit palette) + * 16 bpp truecolor modes (RGB 555 and RGB 565) + * 24 bpp truecolor mode (RGB 888) + * 32 bpp truecolor mode (RGB 888) + * text mode (activated by bpp = 0) + * doublescan mode variant (not available in text mode) + * panning in both directions + * suspend/resume support + +Text mode is supported even in higher resolutions, but there is limitation to +lower pixclocks (i got maximum about 70 MHz, it is dependent on specific +hardware). This limitation is not enforced by driver. Text mode supports 8bit +wide fonts only (hardware limitation) and 16bit tall fonts (driver +limitation). Unfortunately character attributes (like color) in text mode are +broken for unknown reason, so its usefulness is limited. + +There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with +packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode +with interleaved planes (1 byte interleave), MSB first. Both modes support +8bit wide fonts only (driver limitation). + +Suspend/resume works on systems that initialize video card during resume and +if device is active (for example used by fbcon). + + +Missing Features +================ +(alias TODO list) + + * secondary (not initialized by BIOS) device support + * big endian support + * DPMS support + * MMIO support + * interlaced mode variant + * support for fontwidths != 8 in 4 bpp modes + * support for fontheight != 16 in text mode + * hardware cursor + * vsync synchronization + * feature connector support + * acceleration support (8514-like 2D) + + +Known bugs +========== + + * character attributes (and cursor) in text mode are broken + +-- +Ondrej Zajicek -- cgit v1.3.1