From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- Documentation/fb/arkfb.rst | 68 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/fb/arkfb.rst (limited to 'Documentation/fb/arkfb.rst') diff --git a/Documentation/fb/arkfb.rst b/Documentation/fb/arkfb.rst new file mode 100644 index 000000000..aeca8773d --- /dev/null +++ b/Documentation/fb/arkfb.rst @@ -0,0 +1,68 @@ +======================================== +arkfb - fbdev driver for ARK Logic chips +======================================== + + +Supported Hardware +================== + + ARK 2000PV chip + ICS 5342 ramdac + + - only BIOS initialized VGA devices supported + - probably not working on big endian + + +Supported Features +================== + + * 4 bpp pseudocolor modes (with 18bit palette, two variants) + * 8 bpp pseudocolor mode (with 18bit palette) + * 16 bpp truecolor modes (RGB 555 and RGB 565) + * 24 bpp truecolor mode (RGB 888) + * 32 bpp truecolor mode (RGB 888) + * text mode (activated by bpp = 0) + * doublescan mode variant (not available in text mode) + * panning in both directions + * suspend/resume support + +Text mode is supported even in higher resolutions, but there is limitation to +lower pixclocks (i got maximum about 70 MHz, it is dependent on specific +hardware). This limitation is not enforced by driver. Text mode supports 8bit +wide fonts only (hardware limitation) and 16bit tall fonts (driver +limitation). Unfortunately character attributes (like color) in text mode are +broken for unknown reason, so its usefulness is limited. + +There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with +packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode +with interleaved planes (1 byte interleave), MSB first. Both modes support +8bit wide fonts only (driver limitation). + +Suspend/resume works on systems that initialize video card during resume and +if device is active (for example used by fbcon). + + +Missing Features +================ +(alias TODO list) + + * secondary (not initialized by BIOS) device support + * big endian support + * DPMS support + * MMIO support + * interlaced mode variant + * support for fontwidths != 8 in 4 bpp modes + * support for fontheight != 16 in text mode + * hardware cursor + * vsync synchronization + * feature connector support + * acceleration support (8514-like 2D) + + +Known bugs +========== + + * character attributes (and cursor) in text mode are broken + +-- +Ondrej Zajicek -- cgit v1.3.1