From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- Documentation/driver-api/zorro.rst | 104 +++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 Documentation/driver-api/zorro.rst (limited to 'Documentation/driver-api/zorro.rst') diff --git a/Documentation/driver-api/zorro.rst b/Documentation/driver-api/zorro.rst new file mode 100644 index 000000000..664072b01 --- /dev/null +++ b/Documentation/driver-api/zorro.rst @@ -0,0 +1,104 @@ +======================================== +Writing Device Drivers for Zorro Devices +======================================== + +:Author: Written by Geert Uytterhoeven +:Last revised: September 5, 2003 + + +Introduction +------------ + +The Zorro bus is the bus used in the Amiga family of computers. Thanks to +AutoConfig(tm), it's 100% Plug-and-Play. + +There are two types of Zorro buses, Zorro II and Zorro III: + + - The Zorro II address space is 24-bit and lies within the first 16 MB of the + Amiga's address map. + + - Zorro III is a 32-bit extension of Zorro II, which is backwards compatible + with Zorro II. The Zorro III address space lies outside the first 16 MB. + + +Probing for Zorro Devices +------------------------- + +Zorro devices are found by calling ``zorro_find_device()``, which returns a +pointer to the ``next`` Zorro device with the specified Zorro ID. A probe loop +for the board with Zorro ID ``ZORRO_PROD_xxx`` looks like:: + + struct zorro_dev *z = NULL; + + while ((z = zorro_find_device(ZORRO_PROD_xxx, z))) { + if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE, + "My explanation")) + ... + } + +``ZORRO_WILDCARD`` acts as a wildcard and finds any Zorro device. If your driver +supports different types of boards, you can use a construct like:: + + struct zorro_dev *z = NULL; + + while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { + if (z->id != ZORRO_PROD_xxx1 && z->id != ZORRO_PROD_xxx2 && ...) + continue; + if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE, + "My explanation")) + ... + } + + +Zorro Resources +--------------- + +Before you can access a Zorro device's registers, you have to make sure it's +not yet in use. This is done using the I/O memory space resource management +functions:: + + request_mem_region() + release_mem_region() + +Shortcuts to claim the whole device's address space are provided as well:: + + zorro_request_device + zorro_release_device + + +Accessing the Zorro Address Space +--------------------------------- + +The address regions in the Zorro device resources are Zorro bus address +regions. Due to the identity bus-physical address mapping on the Zorro bus, +they are CPU physical addresses as well. + +The treatment of these regions depends on the type of Zorro space: + + - Zorro II address space is always mapped and does not have to be mapped + explicitly using z_ioremap(). + + Conversion from bus/physical Zorro II addresses to kernel virtual addresses + and vice versa is done using:: + + virt_addr = ZTWO_VADDR(bus_addr); + bus_addr = ZTWO_PADDR(virt_addr); + + - Zorro III address space must be mapped explicitly using z_ioremap() first + before it can be accessed:: + + virt_addr = z_ioremap(bus_addr, size); + ... + z_iounmap(virt_addr); + + +References +---------- + +#. linux/include/linux/zorro.h +#. linux/include/uapi/linux/zorro.h +#. linux/include/uapi/linux/zorro_ids.h +#. linux/arch/m68k/include/asm/zorro.h +#. linux/drivers/zorro +#. /proc/bus/zorro + -- cgit v1.3.1