From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- Documentation/driver-api/xilinx/eemi.rst | 40 +++++++++++++++++++++++++++++++ Documentation/driver-api/xilinx/index.rst | 9 +++++++ 2 files changed, 49 insertions(+) create mode 100644 Documentation/driver-api/xilinx/eemi.rst create mode 100644 Documentation/driver-api/xilinx/index.rst (limited to 'Documentation/driver-api/xilinx') diff --git a/Documentation/driver-api/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst new file mode 100644 index 000000000..c1bc47b90 --- /dev/null +++ b/Documentation/driver-api/xilinx/eemi.rst @@ -0,0 +1,40 @@ +==================================== +Xilinx Zynq MPSoC EEMI Documentation +==================================== + +Xilinx Zynq MPSoC Firmware Interface +------------------------------------- +The zynqmp-firmware node describes the interface to platform firmware. +ZynqMP has an interface to communicate with secure firmware. Firmware +driver provides an interface to firmware APIs. Interface APIs can be +used by any driver to communicate with PMC(Platform Management Controller). + +Embedded Energy Management Interface (EEMI) +---------------------------------------------- +The embedded energy management interface is used to allow software +components running across different processing clusters on a chip or +device to communicate with a power management controller (PMC) on a +device to issue or respond to power management requests. + +Any driver who wants to communicate with PMC using EEMI APIs use the +functions provided for each function. + +IOCTL +------ +IOCTL API is for device control and configuration. It is not a system +IOCTL but it is an EEMI API. This API can be used by master to control +any device specific configuration. IOCTL definitions can be platform +specific. This API also manage shared device configuration. + +The following IOCTL IDs are valid for device control: +- IOCTL_SET_PLL_FRAC_MODE 8 +- IOCTL_GET_PLL_FRAC_MODE 9 +- IOCTL_SET_PLL_FRAC_DATA 10 +- IOCTL_GET_PLL_FRAC_DATA 11 + +Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs. + +References +---------- +[0] Embedded Energy Management Interface (EEMI) API guide: + https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf diff --git a/Documentation/driver-api/xilinx/index.rst b/Documentation/driver-api/xilinx/index.rst new file mode 100644 index 000000000..c95bda55d --- /dev/null +++ b/Documentation/driver-api/xilinx/index.rst @@ -0,0 +1,9 @@ + +=========== +Xilinx FPGA +=========== + +.. toctree:: + :maxdepth: 1 + + eemi -- cgit v1.3.1