From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/driver-api/wbrf.rst | 78 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/driver-api/wbrf.rst (limited to 'Documentation/driver-api/wbrf.rst') diff --git a/Documentation/driver-api/wbrf.rst b/Documentation/driver-api/wbrf.rst new file mode 100644 index 000000000..6b18833e2 --- /dev/null +++ b/Documentation/driver-api/wbrf.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +================================= +WBRF - Wifi Band RFI Mitigations +================================= + +Due to electrical and mechanical constraints in certain platform designs +there may be likely interference of relatively high-powered harmonics of +the GPU memory clocks with local radio module frequency bands used by +certain Wifi bands. + +To mitigate possible RFI interference producers can advertise the +frequencies in use and consumers can use this information to avoid using +these frequencies for sensitive features. + +When a platform is known to have this issue with any contained devices, +the platform designer will advertise the availability of this feature via +ACPI devices with a device specific method (_DSM). +* Producers with this _DSM will be able to advertise the frequencies in use. +* Consumers with this _DSM will be able to register for notifications of +frequencies in use. + +Some general terms +================== + +Producer: such component who can produce high-powered radio frequency +Consumer: such component who can adjust its in-use frequency in +response to the radio frequencies of other components to mitigate the +possible RFI. + +To make the mechanism function, those producers should notify active use +of their particular frequencies so that other consumers can make relative +internal adjustments as necessary to avoid this resonance. + +ACPI interface +============== + +Although initially used by for wifi + dGPU use cases, the ACPI interface +can be scaled to any type of device that a platform designer discovers +can cause interference. + +The GUID used for the _DSM is 7B7656CF-DC3D-4C1C-83E9-66E721DE3070. + +3 functions are available in this _DSM: + +* 0: discover # of functions available +* 1: record RF bands in use +* 2: retrieve RF bands in use + +Driver programming interface +============================ + +.. kernel-doc:: drivers/platform/x86/amd/wbrf.c + +Sample Usage +============= + +The expected flow for the producers: +1. During probe, call `acpi_amd_wbrf_supported_producer` to check if WBRF +can be enabled for the device. +2. On using some frequency band, call `acpi_amd_wbrf_add_remove` with 'add' +param to get other consumers properly notified. +3. Or on stopping using some frequency band, call +`acpi_amd_wbrf_add_remove` with 'remove' param to get other consumers notified. + +The expected flow for the consumers: +1. During probe, call `acpi_amd_wbrf_supported_consumer` to check if WBRF +can be enabled for the device. +2. Call `amd_wbrf_register_notifier` to register for notification +of frequency band change(add or remove) from other producers. +3. Call the `amd_wbrf_retrieve_freq_band` initially to retrieve +current active frequency bands considering some producers may broadcast +such information before the consumer is up. +4. On receiving a notification for frequency band change, run +`amd_wbrf_retrieve_freq_band` again to retrieve the latest +active frequency bands. +5. During driver cleanup, call `amd_wbrf_unregister_notifier` to +unregister the notifier. -- cgit v1.3.1