From 78004e9a87f240df03e2f73120d291763c32e0a7 Mon Sep 17 00:00:00 2001 From: Ali Ahmet Memis Date: Fri, 21 Aug 2026 01:45:27 +0000 Subject: openrisc: fix arbitrary kernel memory access via or1k_atomic syscall sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user pointers, v1 and v2, and swaps the words they point to in hand-written assembly. l.lwz r29,0(r4) l.lwz r27,0(r5) l.sw 0(r4),r27 l.sw 0(r5),r29 The pointers are not checked with access_ok(). The four memory accesses also have no exception table entries. A caller passes a kernel address as either pointer, and the syscall reads from and writes to it directly. This gives an unprivileged process a kernel read/write primitive. It overwrites kernel data such as the sys_call_table, gaining code execution in kernel context. Check both pointers before entering the critical section. Add fixups for the four memory accesses so faults on valid but unmapped user addresses return -EFAULT. [shorne@gmail.com: fix comment style] Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis Signed-off-by: Stafford Horne --- Documentation/driver-api/tty/index.rst | 75 ++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/driver-api/tty/index.rst (limited to 'Documentation/driver-api/tty/index.rst') diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst new file mode 100644 index 000000000..c1ffe3d1e --- /dev/null +++ b/Documentation/driver-api/tty/index.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=== +TTY +=== + +Teletypewriter (TTY) layer takes care of all those serial devices. Including +the virtual ones like pseudoterminal (PTY). + +TTY structures +============== + +There are several major TTY structures. Every TTY device in a system has a +corresponding struct tty_port. These devices are maintained by a TTY driver +which is struct tty_driver. This structure describes the driver but also +contains a reference to operations which could be performed on the TTYs. It is +struct tty_operations. Then, upon open, a struct tty_struct is allocated and +lives until the final close. During this time, several callbacks from struct +tty_operations are invoked by the TTY layer. + +Every character received by the kernel (both from devices and users) is passed +through a preselected :doc:`tty_ldisc` (in +short ldisc; in C, struct tty_ldisc_ops). Its task is to transform characters +as defined by a particular ldisc or by user too. The default one is n_tty, +implementing echoes, signal handling, jobs control, special characters +processing, and more. The transformed characters are passed further to +user/device, depending on the source. + +In-detail description of the named TTY structures is in separate documents: + +.. toctree:: + :maxdepth: 2 + + tty_driver + tty_port + tty_struct + tty_ldisc + tty_buffer + tty_ioctl + tty_internals + console + +Writing TTY Driver +================== + +Before one starts writing a TTY driver, they must consider +:doc:`Serial <../serial/driver>` and :doc:`USB Serial <../../usb/usb-serial>` +layers first. Drivers for serial devices can often use one of these specific +layers to implement a serial driver. Only special devices should be handled +directly by the TTY Layer. If you are about to write such a driver, read on. + +A *typical* sequence a TTY driver performs is as follows: + +#. Allocate and register a TTY driver (module init) +#. Create and register TTY devices as they are probed (probe function) +#. Handle TTY operations and events like interrupts (TTY core invokes the + former, the device the latter) +#. Remove devices as they are going away (remove function) +#. Unregister and free the TTY driver (module exit) + +Steps regarding driver, i.e. 1., 3., and 5. are described in detail in +:doc:`tty_driver`. For the other two (devices handling), look into +:doc:`tty_port`. + +Other Documentation +=================== + +Miscellaneous documentation can be further found in these documents: + +.. toctree:: + :maxdepth: 2 + + moxa-smartio + n_gsm + n_tty -- cgit v1.3.1