From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/driver-api/serial/driver.rst | 105 +++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/driver-api/serial/driver.rst (limited to 'Documentation/driver-api/serial/driver.rst') diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst new file mode 100644 index 000000000..c1db6a1a6 --- /dev/null +++ b/Documentation/driver-api/serial/driver.rst @@ -0,0 +1,105 @@ +==================== +Low Level Serial API +==================== + + +This document is meant as a brief overview of some aspects of the new serial +driver. It is not complete, any questions you have should be directed to + + +The reference implementation is contained within amba-pl011.c. + + + +Low Level Serial Hardware Driver +-------------------------------- + +The low level serial hardware driver is responsible for supplying port +information (defined by uart_port) and a set of control methods (defined +by uart_ops) to the core serial driver. The low level driver is also +responsible for handling interrupts for the port, and providing any +console support. + + +Console Support +--------------- + +The serial core provides a few helper functions. This includes +decoding command line arguments (uart_parse_options()). + +There is also a helper function (uart_console_write()) which performs a +character by character write, translating newlines to CRLF sequences. +Driver writers are recommended to use this function rather than implementing +their own version. + + +Locking +------- + +It is the responsibility of the low level hardware driver to perform the +necessary locking using port->lock. There are some exceptions (which +are described in the struct uart_ops listing below.) + +There are two locks. A per-port spinlock, and an overall semaphore. + +From the core driver perspective, the port->lock locks the following +data:: + + port->mctrl + port->icount + port->state->xmit.head (circ_buf->head) + port->state->xmit.tail (circ_buf->tail) + +The low level driver is free to use this lock to provide any additional +locking. + +The port_sem semaphore is used to protect against ports being added/ +removed or reconfigured at inappropriate times. Since v2.6.27, this +semaphore has been the 'mutex' member of the tty_port struct, and +commonly referred to as the port mutex. + + +uart_ops +-------- + +.. kernel-doc:: include/linux/serial_core.h + :identifiers: uart_ops + +Other functions +--------------- + +.. kernel-doc:: drivers/tty/serial/serial_core.c + :identifiers: uart_update_timeout uart_get_baud_rate uart_get_divisor + uart_match_port uart_write_wakeup uart_register_driver + uart_unregister_driver uart_suspend_port uart_resume_port + uart_add_one_port uart_remove_one_port uart_console_write + uart_parse_earlycon uart_parse_options uart_set_options + uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change + uart_try_toggle_sysrq + +.. kernel-doc:: include/linux/serial_core.h + :identifiers: uart_port_tx_limited uart_port_tx + +Other notes +----------- + +It is intended some day to drop the 'unused' entries from uart_port, and +allow low level drivers to register their own individual uart_port's with +the core. This will allow drivers to use uart_port as a pointer to a +structure containing both the uart_port entry with their own extensions, +thus:: + + struct my_port { + struct uart_port port; + int my_stuff; + }; + +Modem control lines via GPIO +---------------------------- + +Some helpers are provided in order to set/get modem control lines via GPIO. + +.. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c + :identifiers: mctrl_gpio_init mctrl_gpio_to_gpiod + mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms + mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync -- cgit v1.3.1