From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/driver-api/serial/driver.rst | 105 +++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/driver-api/serial/driver.rst (limited to 'Documentation/driver-api/serial/driver.rst') diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst new file mode 100644 index 000000000..c1db6a1a6 --- /dev/null +++ b/Documentation/driver-api/serial/driver.rst @@ -0,0 +1,105 @@ +==================== +Low Level Serial API +==================== + + +This document is meant as a brief overview of some aspects of the new serial +driver. It is not complete, any questions you have should be directed to + + +The reference implementation is contained within amba-pl011.c. + + + +Low Level Serial Hardware Driver +-------------------------------- + +The low level serial hardware driver is responsible for supplying port +information (defined by uart_port) and a set of control methods (defined +by uart_ops) to the core serial driver. The low level driver is also +responsible for handling interrupts for the port, and providing any +console support. + + +Console Support +--------------- + +The serial core provides a few helper functions. This includes +decoding command line arguments (uart_parse_options()). + +There is also a helper function (uart_console_write()) which performs a +character by character write, translating newlines to CRLF sequences. +Driver writers are recommended to use this function rather than implementing +their own version. + + +Locking +------- + +It is the responsibility of the low level hardware driver to perform the +necessary locking using port->lock. There are some exceptions (which +are described in the struct uart_ops listing below.) + +There are two locks. A per-port spinlock, and an overall semaphore. + +From the core driver perspective, the port->lock locks the following +data:: + + port->mctrl + port->icount + port->state->xmit.head (circ_buf->head) + port->state->xmit.tail (circ_buf->tail) + +The low level driver is free to use this lock to provide any additional +locking. + +The port_sem semaphore is used to protect against ports being added/ +removed or reconfigured at inappropriate times. Since v2.6.27, this +semaphore has been the 'mutex' member of the tty_port struct, and +commonly referred to as the port mutex. + + +uart_ops +-------- + +.. kernel-doc:: include/linux/serial_core.h + :identifiers: uart_ops + +Other functions +--------------- + +.. kernel-doc:: drivers/tty/serial/serial_core.c + :identifiers: uart_update_timeout uart_get_baud_rate uart_get_divisor + uart_match_port uart_write_wakeup uart_register_driver + uart_unregister_driver uart_suspend_port uart_resume_port + uart_add_one_port uart_remove_one_port uart_console_write + uart_parse_earlycon uart_parse_options uart_set_options + uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change + uart_try_toggle_sysrq + +.. kernel-doc:: include/linux/serial_core.h + :identifiers: uart_port_tx_limited uart_port_tx + +Other notes +----------- + +It is intended some day to drop the 'unused' entries from uart_port, and +allow low level drivers to register their own individual uart_port's with +the core. This will allow drivers to use uart_port as a pointer to a +structure containing both the uart_port entry with their own extensions, +thus:: + + struct my_port { + struct uart_port port; + int my_stuff; + }; + +Modem control lines via GPIO +---------------------------- + +Some helpers are provided in order to set/get modem control lines via GPIO. + +.. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c + :identifiers: mctrl_gpio_init mctrl_gpio_to_gpiod + mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms + mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync -- cgit v1.3.1