From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- Documentation/driver-api/rfkill.rst | 132 ++++++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/driver-api/rfkill.rst (limited to 'Documentation/driver-api/rfkill.rst') diff --git a/Documentation/driver-api/rfkill.rst b/Documentation/driver-api/rfkill.rst new file mode 100644 index 000000000..7d3684e81 --- /dev/null +++ b/Documentation/driver-api/rfkill.rst @@ -0,0 +1,132 @@ +=============================== +rfkill - RF kill switch support +=============================== + + +.. contents:: + :depth: 2 + +Introduction +============ + +The rfkill subsystem provides a generic interface for disabling any radio +transmitter in the system. When a transmitter is blocked, it shall not +radiate any power. + +The subsystem also provides the ability to react on button presses and +disable all transmitters of a certain type (or all). This is intended for +situations where transmitters need to be turned off, for example on +aircraft. + +The rfkill subsystem has a concept of "hard" and "soft" block, which +differ little in their meaning (block == transmitters off) but rather in +whether they can be changed or not: + + - hard block + read-only radio block that cannot be overridden by software + + - soft block + writable radio block (need not be readable) that is set by + the system software. + +The rfkill subsystem has two parameters, rfkill.default_state and +rfkill.master_switch_mode, which are documented in +admin-guide/kernel-parameters.rst. + + +Implementation details +====================== + +The rfkill subsystem is composed of three main components: + + * the rfkill core, + * the deprecated rfkill-input module (an input layer handler, being + replaced by userspace policy code) and + * the rfkill drivers. + +The rfkill core provides API for kernel drivers to register their radio +transmitter with the kernel, methods for turning it on and off, and letting +the system know about hardware-disabled states that may be implemented on +the device. + +The rfkill core code also notifies userspace of state changes, and provides +ways for userspace to query the current states. See the "Userspace support" +section below. + +When the device is hard-blocked (either by a call to rfkill_set_hw_state() +or from query_hw_block), set_block() will be invoked for additional software +block, but drivers can ignore the method call since they can use the return +value of the function rfkill_set_hw_state() to sync the software state +instead of keeping track of calls to set_block(). In fact, drivers should +use the return value of rfkill_set_hw_state() unless the hardware actually +keeps track of soft and hard block separately. + + +Kernel API +========== + +Drivers for radio transmitters normally implement an rfkill driver. + +Platform drivers might implement input devices if the rfkill button is just +that, a button. If that button influences the hardware then you need to +implement an rfkill driver instead. This also applies if the platform provides +a way to turn on/off the transmitter(s). + +For some platforms, it is possible that the hardware state changes during +suspend/hibernation, in which case it will be necessary to update the rfkill +core with the current state at resume time. + +To create an rfkill driver, driver's Kconfig needs to have:: + + depends on RFKILL || !RFKILL + +to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL +case allows the driver to be built when rfkill is not configured, in which +case all rfkill API can still be used but will be provided by static inlines +which compile to almost nothing. + +Calling rfkill_set_hw_state() when a state change happens is required from +rfkill drivers that control devices that can be hard-blocked unless they also +assign the poll_hw_block() callback (then the rfkill core will poll the +device). Don't do this unless you cannot get the event in any other way. + +rfkill provides per-switch LED triggers, which can be used to drive LEDs +according to the switch state (LED_FULL when blocked, LED_OFF otherwise). + + +Userspace support +================= + +The recommended userspace interface to use is /dev/rfkill, which is a misc +character device that allows userspace to obtain and set the state of rfkill +devices and sets of devices. It also notifies userspace about device addition +and removal. The API is a simple read/write API that is defined in +linux/rfkill.h, with one ioctl that allows turning off the deprecated input +handler in the kernel for the transition period. + +Except for the one ioctl, communication with the kernel is done via read() +and write() of instances of 'struct rfkill_event'. In this structure, the +soft and hard block are properly separated (unlike sysfs, see below) and +userspace is able to get a consistent snapshot of all rfkill devices in the +system. Also, it is possible to switch all rfkill drivers (or all drivers of +a specified type) into a state which also updates the default state for +hotplugged devices. + +After an application opens /dev/rfkill, it can read the current state of all +devices. Changes can be obtained by either polling the descriptor for +hotplug or state change events or by listening for uevents emitted by the +rfkill core framework. + +Additionally, each rfkill device is registered in sysfs and emits uevents. + +rfkill devices issue uevents (with an action of "change"), with the following +environment variables set:: + + RFKILL_NAME + RFKILL_STATE + RFKILL_TYPE + +The content of these variables corresponds to the "name", "state" and +"type" sysfs files explained above. + +For further details consult Documentation/ABI/stable/sysfs-class-rfkill. -- cgit v1.3.1