From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/driver-api/hw-recoverable-errors.rst | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/driver-api/hw-recoverable-errors.rst (limited to 'Documentation/driver-api/hw-recoverable-errors.rst') diff --git a/Documentation/driver-api/hw-recoverable-errors.rst b/Documentation/driver-api/hw-recoverable-errors.rst new file mode 100644 index 000000000..fc526c345 --- /dev/null +++ b/Documentation/driver-api/hw-recoverable-errors.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================================= +Recoverable Hardware Error Tracking in vmcoreinfo +================================================= + +Overview +-------- + +This feature provides a generic infrastructure within the Linux kernel to track +and log recoverable hardware errors. These are hardware recoverable errors +visible that might not cause immediate panics but may influence health, mainly +because new code path will be executed in the kernel. + +By recording counts and timestamps of recoverable errors into the vmcoreinfo +crash dump notes, this infrastructure aids post-mortem crash analysis tools in +correlating hardware events with kernel failures. This enables faster triage +and better understanding of root causes, especially in large-scale cloud +environments where hardware issues are common. + +Benefits +-------- + +- Facilitates correlation of hardware recoverable errors with kernel panics or + unusual code paths that lead to system crashes. +- Provides operators and cloud providers quick insights, improving reliability + and reducing troubleshooting time. +- Complements existing full hardware diagnostics without replacing them. + +Data Exposure and Consumption +----------------------------- + +- The tracked error data consists of per-error-type counts and timestamps of + last occurrence. +- This data is stored in the `hwerror_data` array, categorized by error source + types like CPU, memory, PCI, CXL, and others. +- It is exposed via vmcoreinfo crash dump notes and can be read using tools + like `crash`, `drgn`, or other kernel crash analysis utilities. +- There is no other way to read these data other than from crash dumps. +- These errors are divided by area, which includes CPU, Memory, PCI, CXL and + others. + +Typical usage example (in drgn REPL): + +.. code-block:: python + + >>> prog['hwerror_data'] + (struct hwerror_info[HWERR_RECOV_MAX]){ + { + .count = (int)844, + .timestamp = (time64_t)1752852018, + }, + ... + } + +Enabling +-------- + +- This feature is enabled when CONFIG_VMCORE_INFO is set. + -- cgit v1.3.1