From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 19 Aug 2026 10:09:22 -0700
Subject: Merge tag 'media/v7.3-1' of
 git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...
---
 Documentation/driver-api/hte/hte.rst       | 79 ++++++++++++++++++++++++++++++
 Documentation/driver-api/hte/index.rst     | 22 +++++++++
 Documentation/driver-api/hte/tegra-hte.rst | 47 ++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 Documentation/driver-api/hte/hte.rst
 create mode 100644 Documentation/driver-api/hte/index.rst
 create mode 100644 Documentation/driver-api/hte/tegra-hte.rst

(limited to 'Documentation/driver-api/hte')

diff --git a/Documentation/driver-api/hte/hte.rst b/Documentation/driver-api/hte/hte.rst
new file mode 100644
index 000000000..153f3233c
--- /dev/null
+++ b/Documentation/driver-api/hte/hte.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+============================================
+The Linux Hardware Timestamping Engine (HTE)
+============================================
+
+:Author: Dipen Patel
+
+Introduction
+------------
+
+Certain devices have built in hardware timestamping engines which can
+monitor sets of system signals, lines, buses etc... in realtime for state
+change; upon detecting the change they can automatically store the timestamp at
+the moment of occurrence. Such functionality may help achieve better accuracy
+in obtaining timestamps than using software counterparts i.e. ktime and
+friends.
+
+This document describes the API that can be used by hardware timestamping
+engine provider and consumer drivers that want to use the hardware timestamping
+engine (HTE) framework. Both consumers and providers must include
+``#include <linux/hte.h>``.
+
+The HTE framework APIs for the providers
+----------------------------------------
+
+.. kernel-doc:: drivers/hte/hte.c
+   :functions: devm_hte_register_chip hte_push_ts_ns
+
+The HTE framework APIs for the consumers
+----------------------------------------
+
+.. kernel-doc:: drivers/hte/hte.c
+   :functions: hte_init_line_attr hte_ts_get hte_ts_put devm_hte_request_ts_ns hte_request_ts_ns hte_enable_ts hte_disable_ts of_hte_req_count hte_get_clk_src_info
+
+The HTE framework public structures
+-----------------------------------
+.. kernel-doc:: include/linux/hte.h
+
+More on the HTE timestamp data
+------------------------------
+The ``struct hte_ts_data`` is used to pass timestamp details between the
+consumers and the providers. It expresses timestamp data in nanoseconds in
+u64. An example of the typical timestamp data life cycle, for the GPIO line is
+as follows::
+
+ - Monitors GPIO line change.
+ - Detects the state change on GPIO line.
+ - Converts timestamps in nanoseconds.
+ - Stores GPIO raw level in raw_level variable if the provider has that
+ hardware capability.
+ - Pushes this hte_ts_data object to HTE subsystem.
+ - HTE subsystem increments seq counter and invokes consumer provided callback.
+ Based on callback return value, the HTE core invokes secondary callback in
+ the thread context.
+
+HTE subsystem debugfs attributes
+--------------------------------
+HTE subsystem creates debugfs attributes at ``/sys/kernel/debug/hte/``.
+It also creates line/signal-related debugfs attributes at
+``/sys/kernel/debug/hte/<provider>/<label or line id>/``. Note that these
+attributes are read-only.
+
+`ts_requested`
+		The total number of entities requested from the given provider,
+		where entity is specified by the provider and could represent
+		lines, GPIO, chip signals, buses etc...
+                The attribute will be available at
+		``/sys/kernel/debug/hte/<provider>/``.
+
+`total_ts`
+		The total number of entities supported by the provider.
+                The attribute will be available at
+		``/sys/kernel/debug/hte/<provider>/``.
+
+`dropped_timestamps`
+		The dropped timestamps for a given line.
+                The attribute will be available at
+		``/sys/kernel/debug/hte/<provider>/<label or line id>/``.
diff --git a/Documentation/driver-api/hte/index.rst b/Documentation/driver-api/hte/index.rst
new file mode 100644
index 000000000..29011de9a
--- /dev/null
+++ b/Documentation/driver-api/hte/index.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+The Linux Hardware Timestamping Engine (HTE)
+============================================
+
+The HTE Subsystem
+=================
+
+.. toctree::
+   :maxdepth: 1
+
+   hte
+
+HTE Tegra Provider
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+   tegra-hte
+
diff --git a/Documentation/driver-api/hte/tegra-hte.rst b/Documentation/driver-api/hte/tegra-hte.rst
new file mode 100644
index 000000000..85e654772
--- /dev/null
+++ b/Documentation/driver-api/hte/tegra-hte.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+HTE Kernel provider driver
+==========================
+
+Description
+-----------
+The Nvidia tegra HTE provider also known as GTE (Generic Timestamping Engine)
+driver implements two GTE instances: 1) GPIO GTE and 2) LIC
+(Legacy Interrupt Controller) IRQ GTE. Both GTE instances get the timestamp
+from the system counter TSC which has 31.25MHz clock rate, and the driver
+converts clock tick rate to nanoseconds before storing it as timestamp value.
+
+GPIO GTE
+--------
+
+This GTE instance timestamps GPIO in real time. For that to happen GPIO
+needs to be configured as input. Only the always on (AON) GPIO controller
+instance supports timestamping GPIOs in real time as it is tightly coupled with
+the GPIO GTE. To support this, GPIOLIB adds two optional APIs as mentioned
+below. The GPIO GTE code supports both kernel and userspace consumers. The
+kernel space consumers can directly talk to HTE subsystem while userspace
+consumers timestamp requests go through GPIOLIB CDEV framework to HTE
+subsystem. The hte devicetree binding described at
+``Documentation/devicetree/bindings/timestamp`` provides an example of how a
+consumer can request an GPIO line.
+
+See gpiod_enable_hw_timestamp_ns() and gpiod_disable_hw_timestamp_ns().
+
+For userspace consumers, GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE flag must be
+specified during IOCTL calls. Refer to ``tools/gpio/gpio-event-mon.c``, which
+returns the timestamp in nanoseconds.
+
+LIC (Legacy Interrupt Controller) IRQ GTE
+-----------------------------------------
+
+This GTE instance timestamps LIC IRQ lines in real time. The hte devicetree
+binding described at ``Documentation/devicetree/bindings/timestamp``
+provides an example of how a consumer can request an IRQ line. Since it is a
+one-to-one mapping with IRQ GTE provider, consumers can simply specify the IRQ
+number that they are interested in. There is no userspace consumer support for
+this GTE instance in the HTE framework.
+
+The provider source code of both IRQ and GPIO GTE instances is located at
+``drivers/hte/hte-tegra194.c``. The test driver
+``drivers/hte/hte-tegra194-test.c`` demonstrates HTE API usage for both IRQ
+and GPIO GTE.
-- 
cgit v1.3.1