From dd05add7b2b6004c5fa3a1f276f56d8668f86b65 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Sat, 26 Sep 2026 19:20:30 -0300 Subject: netfs: zero the tail of a short DIO/unbuffered read The buffered read collector zero-fills the tail of a short read that stops below the inode's i_size (netfs_clear_unread()), so a read that races an extending write still returns the expected number of bytes. The non-buffered collector path does no such thing: it just records how much was transferred. Add the same zero-fill for the non-buffered case, gated on NETFS_SREQ_CLEAR_TAIL: a subreq's source sets that flag when a short result from it is known to be safe to treat as a hole, as opposed to NETFS_SREQ_HIT_EOF, which means the read genuinely ran off the end of the file and should be reported short as-is. Only CLEAR_TAIL should zero-fill here; a real EOF must stay a real short read. No source currently sets CLEAR_TAIL on an unbuffered/DIO subrequest, so this is inert on its own -- a following change teaches cifs to set it in the one case that needs it. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Reviewed-by: David Howells Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara Cc: Christian Brauner Cc: Matthew Wilcox Cc: Ronnie Sahlberg Cc: Shyam Prasad N Cc: Tom Talpey Cc: Bharath SM Cc: stable@vger.kernel.org --- Documentation/driver-api/hte/hte.rst | 79 ++++++++++++++++++++++++++++++ Documentation/driver-api/hte/index.rst | 22 +++++++++ Documentation/driver-api/hte/tegra-hte.rst | 47 ++++++++++++++++++ 3 files changed, 148 insertions(+) create mode 100644 Documentation/driver-api/hte/hte.rst create mode 100644 Documentation/driver-api/hte/index.rst create mode 100644 Documentation/driver-api/hte/tegra-hte.rst (limited to 'Documentation/driver-api/hte') diff --git a/Documentation/driver-api/hte/hte.rst b/Documentation/driver-api/hte/hte.rst new file mode 100644 index 000000000..153f3233c --- /dev/null +++ b/Documentation/driver-api/hte/hte.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +============================================ +The Linux Hardware Timestamping Engine (HTE) +============================================ + +:Author: Dipen Patel + +Introduction +------------ + +Certain devices have built in hardware timestamping engines which can +monitor sets of system signals, lines, buses etc... in realtime for state +change; upon detecting the change they can automatically store the timestamp at +the moment of occurrence. Such functionality may help achieve better accuracy +in obtaining timestamps than using software counterparts i.e. ktime and +friends. + +This document describes the API that can be used by hardware timestamping +engine provider and consumer drivers that want to use the hardware timestamping +engine (HTE) framework. Both consumers and providers must include +``#include ``. + +The HTE framework APIs for the providers +---------------------------------------- + +.. kernel-doc:: drivers/hte/hte.c + :functions: devm_hte_register_chip hte_push_ts_ns + +The HTE framework APIs for the consumers +---------------------------------------- + +.. kernel-doc:: drivers/hte/hte.c + :functions: hte_init_line_attr hte_ts_get hte_ts_put devm_hte_request_ts_ns hte_request_ts_ns hte_enable_ts hte_disable_ts of_hte_req_count hte_get_clk_src_info + +The HTE framework public structures +----------------------------------- +.. kernel-doc:: include/linux/hte.h + +More on the HTE timestamp data +------------------------------ +The ``struct hte_ts_data`` is used to pass timestamp details between the +consumers and the providers. It expresses timestamp data in nanoseconds in +u64. An example of the typical timestamp data life cycle, for the GPIO line is +as follows:: + + - Monitors GPIO line change. + - Detects the state change on GPIO line. + - Converts timestamps in nanoseconds. + - Stores GPIO raw level in raw_level variable if the provider has that + hardware capability. + - Pushes this hte_ts_data object to HTE subsystem. + - HTE subsystem increments seq counter and invokes consumer provided callback. + Based on callback return value, the HTE core invokes secondary callback in + the thread context. + +HTE subsystem debugfs attributes +-------------------------------- +HTE subsystem creates debugfs attributes at ``/sys/kernel/debug/hte/``. +It also creates line/signal-related debugfs attributes at +``/sys/kernel/debug/hte//