From 5febf432df1cfa5b25d99b54c32103fafbdd0eb9 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Sun, 16 Aug 2026 15:32:33 +0200 Subject: kbuild: rust: keep Rust objects out of Clang LTO with inline helpers Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit `objtool` errors such as: vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a: can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd The reason is that in such builds, the Clang invocation that compiles the combined Rust plus helpers bitcode emits LLVM bitcode (again) -- the final code generation happens in the linker's LTO step, which the `-mllvm` trap options passed to Clang do not reach. This, in turn, means that unreachable traps are missing, and the impossible paths do not merely fallthrough to the next symbol, but past the end of their own section, since LTO builds place each function in its own section. Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always emits machine code directly, with the traps in place. Assisted-by: LLM Cc: Gary Guo Cc: Boqun Feng Cc: Alice Ryhl Cc: Matthew Maurer Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: stable@vger.kernel.org Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust") Acked-by: Gary Guo Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda --- Documentation/driver-api/hsi.rst | 88 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/driver-api/hsi.rst (limited to 'Documentation/driver-api/hsi.rst') diff --git a/Documentation/driver-api/hsi.rst b/Documentation/driver-api/hsi.rst new file mode 100644 index 000000000..01b6bebfb --- /dev/null +++ b/Documentation/driver-api/hsi.rst @@ -0,0 +1,88 @@ +High Speed Synchronous Serial Interface (HSI) +============================================= + +Introduction +--------------- + +High Speed Synchronous Interface (HSI) is a full duplex, low latency protocol, +that is optimized for die-level interconnect between an Application Processor +and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and +implemented by multiple vendors since then. + +The HSI interface supports full duplex communication over multiple channels +(typically 8) and is capable of reaching speeds up to 200 Mbit/s. + +The serial protocol uses two signals, DATA and FLAG as combined data and clock +signals and an additional READY signal for flow control. An additional WAKE +signal can be used to wakeup the chips from standby modes. The signals are +commonly prefixed by AC for signals going from the application die to the +cellular die and CA for signals going the other way around. + +:: + + +------------+ +---------------+ + | Cellular | | Application | + | Die | | Die | + | | - - - - - - CAWAKE - - - - - - >| | + | T|------------ CADATA ------------>|R | + | X|------------ CAFLAG ------------>|X | + | |<----------- ACREADY ------------| | + | | | | + | | | | + | |< - - - - - ACWAKE - - - - - - -| | + | R|<----------- ACDATA -------------|T | + | X|<----------- ACFLAG -------------|X | + | |------------ CAREADY ----------->| | + | | | | + | | | | + +------------+ +---------------+ + +HSI Subsystem in Linux +------------------------- + +In the Linux kernel the hsi subsystem is supposed to be used for HSI devices. +The hsi subsystem contains drivers for hsi controllers including support for +multi-port controllers and provides a generic API for using the HSI ports. + +It also contains HSI client drivers, which make use of the generic API to +implement a protocol used on the HSI interface. These client drivers can +use an arbitrary number of channels. + +hsi-char Device +------------------ + +Each port automatically registers a generic client driver called hsi_char, +which provides a character device for userspace representing the HSI port. +It can be used to communicate via HSI from userspace. Userspace may +configure the hsi_char device using the following ioctl commands: + +HSC_RESET + flush the HSI port + +HSC_SET_PM + enable or disable the client. + +HSC_SEND_BREAK + send break + +HSC_SET_RX + set RX configuration + +HSC_GET_RX + get RX configuration + +HSC_SET_TX + set TX configuration + +HSC_GET_TX + get TX configuration + +The kernel HSI API +------------------ + +.. kernel-doc:: include/linux/hsi/hsi.h + :internal: + +.. kernel-doc:: drivers/hsi/hsi_core.c + :export: + -- cgit v1.3.1