From 0d6526f82c3cdefcca47f73f5fc08dc6f335eac6 Mon Sep 17 00:00:00 2001 From: Tim Chen Date: Mon, 21 Sep 2026 17:37:22 -0700 Subject: sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling bug alb_break_llc() decides whether to break LLC preference during active load balance. It does so by testing that every runnable fair task on the source rq prefers its LLC: env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable But the two counters cover different sets. nr_pref_llc_running is updated in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued, so it follows queued tasks. h_nr_runnable is updated in set_delayed()/ clear_delayed() and drops delay-dequeued tasks. So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks, alb_break_llc() returns false, and active balance is free to pull a task off its preferred LLC. Active balance only moves runnable tasks, and this is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB skips the per-task test in can_migrate_task(). The runnable set is the one we want. Fix it on the counter side. A task should be counted in nr_pref_llc_running exactly while it is both queued on its preferred LLC (pref_llc_queued) and runnable (!sched_delayed). Define that membership once in task_pref_llc_runnable(), and adjust the counter only through pref_llc_running_inc()/pref_llc_running_dec() from the four sites that change either input: account_llc_enqueue(), account_llc_dequeue(), set_delayed() and clear_delayed(). Gating every update on the same predicate keeps the delay, wake and dequeue paths from double-counting or underflowing; see the comments at those sites for the ordering. nr_llc_running and sd->llc_counts are not touched and stay on queued semantics. Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC") Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/ Reported-by: Zhan Xusheng Suggested-by: Chen Yu Signed-off-by: Tim Chen Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Kayra Cizmeci Cc: # v7.2.x Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com --- Documentation/driver-api/fpga/fpga-programming.rst | 107 +++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 Documentation/driver-api/fpga/fpga-programming.rst (limited to 'Documentation/driver-api/fpga/fpga-programming.rst') diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst new file mode 100644 index 000000000..fb4da4240 --- /dev/null +++ b/Documentation/driver-api/fpga/fpga-programming.rst @@ -0,0 +1,107 @@ +In-kernel API for FPGA Programming +================================== + +Overview +-------- + +The in-kernel API for FPGA programming is a combination of APIs from +FPGA manager, bridge, and regions. The actual function used to +trigger FPGA programming is fpga_region_program_fpga(). + +fpga_region_program_fpga() uses functionality supplied by +the FPGA manager and bridges. It will: + + * lock the region's mutex + * lock the mutex of the region's FPGA manager + * build a list of FPGA bridges if a method has been specified to do so + * disable the bridges + * program the FPGA using info passed in :c:expr:`fpga_region->info`. + * re-enable the bridges + * release the locks + +The struct fpga_image_info specifies what FPGA image to program. It is +allocated/freed by fpga_image_info_alloc() and freed with +fpga_image_info_free() + +How to program an FPGA using a region +------------------------------------- + +When the FPGA region driver probed, it was given a pointer to an FPGA manager +driver so it knows which manager to use. The region also either has a list of +bridges to control during programming or it has a pointer to a function that +will generate that list. Here's some sample code of what to do next:: + + #include + #include + + struct fpga_image_info *info; + int ret; + + /* + * First, alloc the struct with information about the FPGA image to + * program. + */ + info = fpga_image_info_alloc(dev); + if (!info) + return -ENOMEM; + + /* Set flags as needed, such as: */ + info->flags = FPGA_MGR_PARTIAL_RECONFIG; + + /* + * Indicate where the FPGA image is. This is pseudo-code; you're + * going to use one of these three. + */ + if (image is in a scatter gather table) { + + info->sgt = [your scatter gather table] + + } else if (image is in a buffer) { + + info->buf = [your image buffer] + info->count = [image buffer size] + + } else if (image is in a firmware file) { + + info->firmware_name = devm_kstrdup(dev, firmware_name, + GFP_KERNEL); + + } + + /* Add info to region and do the programming */ + region->info = info; + ret = fpga_region_program_fpga(region); + + /* Deallocate the image info if you're done with it */ + region->info = NULL; + fpga_image_info_free(info); + + if (ret) + return ret; + + /* Now enumerate whatever hardware has appeared in the FPGA. */ + +API for programming an FPGA +--------------------------- + +* fpga_region_program_fpga() - Program an FPGA +* fpga_image_info() - Specifies what FPGA image to program +* fpga_image_info_alloc() - Allocate an FPGA image info struct +* fpga_image_info_free() - Free an FPGA image info struct + +.. kernel-doc:: drivers/fpga/fpga-region.c + :functions: fpga_region_program_fpga + +FPGA Manager flags + +.. kernel-doc:: include/linux/fpga/fpga-mgr.h + :doc: FPGA Manager flags + +.. kernel-doc:: include/linux/fpga/fpga-mgr.h + :functions: fpga_image_info + +.. kernel-doc:: drivers/fpga/fpga-mgr.c + :functions: fpga_image_info_alloc + +.. kernel-doc:: drivers/fpga/fpga-mgr.c + :functions: fpga_image_info_free -- cgit v1.3.1