From 8d836581f9b1f57ceaa2b47654754ef1260b410b Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Wed, 16 Sep 2026 15:00:32 +0200 Subject: ata: libata-scsi: fix ata_dsm_trim_pages() kernel-doc make htmldocs fails with: Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301: ERROR: Unexpected indentation. [docutils] The Return: section of ata_dsm_trim_pages() ends its first sentence with a colon and continues with an indented bullet list. reStructuredText requires a blank line before an indented block, so docutils chokes on the list. Simply adding the missing blank line does not work either: Return: is a kernel-doc "special section", which is terminated by the first blank line, so the bullet list would end up in the Description section, detached from the sentence introducing it. Spell the two bounds out as prose instead, so that the Return: section stays self-contained. Documentation-only change. Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND") Reported-by: Thomas Huth Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/ Reviewed-by: Damien Le Moal Reviewed-by: Thomas Huth Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org Signed-off-by: Niklas Cassel --- .../driver-api/backlight/lp855x-driver.rst | 81 ++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/driver-api/backlight/lp855x-driver.rst (limited to 'Documentation/driver-api/backlight') diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst new file mode 100644 index 000000000..1e0b224fc --- /dev/null +++ b/Documentation/driver-api/backlight/lp855x-driver.rst @@ -0,0 +1,81 @@ +==================== +Kernel driver lp855x +==================== + +Backlight driver for LP855x ICs + +Supported chips: + + Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 + +Author: Milo(Woogyom) Kim + +Description +----------- + +* Brightness control + + Brightness can be controlled by the pwm input or the i2c command. + The lp855x driver supports both cases. + +* Device attributes + + 1) bl_ctl_mode + + Backlight control mode. + + Value: pwm based or register based + + 2) chip_id + + The lp855x chip id. + + Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557 + +Platform data for lp855x +------------------------ + +For supporting platform specific data, the lp855x platform data can be used. + +* name: + Backlight driver name. If it is not defined, default name is set. +* device_control: + Value of DEVICE CONTROL register. +* initial_brightness: + Initial value of backlight brightness. +* period_ns: + Platform specific PWM period value. unit is nano. + Only valid when brightness is pwm input mode. +* size_program: + Total size of lp855x_rom_data. +* rom_data: + List of new eeprom/eprom registers. + +Examples +======== + +1) lp8552 platform data: i2c register mode with new eeprom data:: + + #define EEPROM_A5_ADDR 0xA5 + #define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */ + + static struct lp855x_rom_data lp8552_eeprom_arr[] = { + {EEPROM_A5_ADDR, EEPROM_A5_VAL}, + }; + + static struct lp855x_platform_data lp8552_pdata = { + .name = "lcd-bl", + .device_control = I2C_CONFIG(LP8552), + .initial_brightness = INITIAL_BRT, + .size_program = ARRAY_SIZE(lp8552_eeprom_arr), + .rom_data = lp8552_eeprom_arr, + }; + +2) lp8556 platform data: pwm input mode with default rom data:: + + static struct lp855x_platform_data lp8556_pdata = { + .device_control = PWM_CONFIG(LP8556), + .initial_brightness = INITIAL_BRT, + .period_ns = 1000000, + }; -- cgit v1.3.1