From 836b2fe544a5e9b5ce116622cb36fba33838c6fd Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Fri, 4 Sep 2026 01:33:23 -0700 Subject: selftests/bpf: Check that JMP32 pointer vs zero jumps are not predicted Add jmp32_ptr_vs_zero_jne: the fall-through of the 32-bit compare, which the verifier used to skip, contains an out of bounds map value access, hence w/o the previous patch the program is accepted. See previous patch for detailed description. Reported-by: Nicholas Carlini Suggested-by: Nicholas Carlini Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/bpf/20260904083325.2083493-6-eddyz87@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi --- .../driver-api/backlight/lp855x-driver.rst | 81 ++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/driver-api/backlight/lp855x-driver.rst (limited to 'Documentation/driver-api/backlight') diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst new file mode 100644 index 000000000..1e0b224fc --- /dev/null +++ b/Documentation/driver-api/backlight/lp855x-driver.rst @@ -0,0 +1,81 @@ +==================== +Kernel driver lp855x +==================== + +Backlight driver for LP855x ICs + +Supported chips: + + Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 + +Author: Milo(Woogyom) Kim + +Description +----------- + +* Brightness control + + Brightness can be controlled by the pwm input or the i2c command. + The lp855x driver supports both cases. + +* Device attributes + + 1) bl_ctl_mode + + Backlight control mode. + + Value: pwm based or register based + + 2) chip_id + + The lp855x chip id. + + Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557 + +Platform data for lp855x +------------------------ + +For supporting platform specific data, the lp855x platform data can be used. + +* name: + Backlight driver name. If it is not defined, default name is set. +* device_control: + Value of DEVICE CONTROL register. +* initial_brightness: + Initial value of backlight brightness. +* period_ns: + Platform specific PWM period value. unit is nano. + Only valid when brightness is pwm input mode. +* size_program: + Total size of lp855x_rom_data. +* rom_data: + List of new eeprom/eprom registers. + +Examples +======== + +1) lp8552 platform data: i2c register mode with new eeprom data:: + + #define EEPROM_A5_ADDR 0xA5 + #define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */ + + static struct lp855x_rom_data lp8552_eeprom_arr[] = { + {EEPROM_A5_ADDR, EEPROM_A5_VAL}, + }; + + static struct lp855x_platform_data lp8552_pdata = { + .name = "lcd-bl", + .device_control = I2C_CONFIG(LP8552), + .initial_brightness = INITIAL_BRT, + .size_program = ARRAY_SIZE(lp8552_eeprom_arr), + .rom_data = lp8552_eeprom_arr, + }; + +2) lp8556 platform data: pwm input mode with default rom data:: + + static struct lp855x_platform_data lp8556_pdata = { + .device_control = PWM_CONFIG(LP8556), + .initial_brightness = INITIAL_BRT, + .period_ns = 1000000, + }; -- cgit v1.3.1