From 33a154a96e71a34a1bcca9f40da343dbbf7b38b4 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 1 Oct 2026 14:52:55 +0000 Subject: selftests/bpf: Test packet range of pointers sharing an id Add tests where two packet pointers share an id and tightening one pointer's umax from its var_off would put it less than their constant distance from the other's umax: with an index & 0x38 capped at 50, the base pointer keeps umax 50, so the pointer 8 bytes further on must keep umax 58, even though its known bits allow at most 56. These refused a valid program or accepted an out-of-bounds access before the fix: - check the advanced copy, load through the base: valid, was refused; - check the base, load the byte at base + 1 through a copy advanced by 8: was accepted; - check base + 4, load 4 bytes at base + 2 through base + 8: reads two bytes past the checked range, was accepted; - the same as the second with data_meta pointers checked against data: was accepted. These pass with and without the fix and cover nearby paths: - subtract an unknown scalar from a checked pointer and load below it (the range is kept across a new id); - reach a load through two paths whose checks cover 8 and 7 bytes after the loaded pointer; the second path must not be pruned by the first; - spill a copy of a pointer, check the pointer, fill the copy and load one byte past the checked range: the load is refused, and the copy has the range of the check. Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20261001145255.855630-2-alexei.starovoitov@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi --- .../driver-api/backlight/lp855x-driver.rst | 81 ++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/driver-api/backlight/lp855x-driver.rst (limited to 'Documentation/driver-api/backlight') diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst new file mode 100644 index 000000000..1e0b224fc --- /dev/null +++ b/Documentation/driver-api/backlight/lp855x-driver.rst @@ -0,0 +1,81 @@ +==================== +Kernel driver lp855x +==================== + +Backlight driver for LP855x ICs + +Supported chips: + + Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 + +Author: Milo(Woogyom) Kim + +Description +----------- + +* Brightness control + + Brightness can be controlled by the pwm input or the i2c command. + The lp855x driver supports both cases. + +* Device attributes + + 1) bl_ctl_mode + + Backlight control mode. + + Value: pwm based or register based + + 2) chip_id + + The lp855x chip id. + + Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557 + +Platform data for lp855x +------------------------ + +For supporting platform specific data, the lp855x platform data can be used. + +* name: + Backlight driver name. If it is not defined, default name is set. +* device_control: + Value of DEVICE CONTROL register. +* initial_brightness: + Initial value of backlight brightness. +* period_ns: + Platform specific PWM period value. unit is nano. + Only valid when brightness is pwm input mode. +* size_program: + Total size of lp855x_rom_data. +* rom_data: + List of new eeprom/eprom registers. + +Examples +======== + +1) lp8552 platform data: i2c register mode with new eeprom data:: + + #define EEPROM_A5_ADDR 0xA5 + #define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */ + + static struct lp855x_rom_data lp8552_eeprom_arr[] = { + {EEPROM_A5_ADDR, EEPROM_A5_VAL}, + }; + + static struct lp855x_platform_data lp8552_pdata = { + .name = "lcd-bl", + .device_control = I2C_CONFIG(LP8552), + .initial_brightness = INITIAL_BRT, + .size_program = ARRAY_SIZE(lp8552_eeprom_arr), + .rom_data = lp8552_eeprom_arr, + }; + +2) lp8556 platform data: pwm input mode with default rom data:: + + static struct lp855x_platform_data lp8556_pdata = { + .device_control = PWM_CONFIG(LP8556), + .initial_brightness = INITIAL_BRT, + .period_ns = 1000000, + }; -- cgit v1.3.1