From e873c74132f0c5f1452816cd9bb26208f0bba1e1 Mon Sep 17 00:00:00 2001 From: Shivank Garg Date: Sat, 22 Aug 2026 19:22:05 +0000 Subject: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before the put so the trailing module_put() does not need chan->device. Fixes: 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct") Suggested-by: Sashiko Link: https://sashiko.dev/#/patchset/20260518-dmaengine-kref-fix-v1-1-4d6125048fb7@amd.com Reviewed-by: Frank Li Reviewed-by: Logan Gunthorpe Signed-off-by: Shivank Garg Link: https://patch.msgid.link/20260822-dmaengine-kref-fix-v5-3-d4a4ee47d927@amd.com Signed-off-by: Vinod Koul --- .../devicetree/bindings/regmap/regmap.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/regmap/regmap.txt (limited to 'Documentation/devicetree/bindings/regmap') diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 000000000..873096be0 --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -0,0 +1,29 @@ +Devicetree binding for regmap + +Optional properties: + + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition + +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. + +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianness +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. + +Examples: +Scenario 1 : a register set in big-endian mode. +dev: dev@40031000 { + compatible = "syscon"; + reg = <0x40031000 0x1000>; + big-endian; + ... +}; -- cgit v1.3.1