From e1c13aed4a1641550e8c9518c96f016e1d52d09b Mon Sep 17 00:00:00 2001 From: Yijie Yang Date: Tue, 11 Aug 2026 16:46:47 +0800 Subject: dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible Add the Qualcomm Maili SoC compatible string for the CPU bandwidth monitor (BWMONv4). This falls back to the sdm845-bwmon compatible, consistent with the existing pattern used by other recent SoCs such as sm8750 and kaanapali. Signed-off-by: Yijie Yang Acked-by: Krzysztof Kozlowski Reviewed-by: Jingyi Wang Link: https://patch.msgid.link/20260811-bwmon-v2-1-80f7f150ab9e@oss.qualcomm.com Signed-off-by: Rob Herring (Arm) --- .../devicetree/bindings/regmap/regmap.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/regmap/regmap.txt (limited to 'Documentation/devicetree/bindings/regmap') diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 000000000..873096be0 --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -0,0 +1,29 @@ +Devicetree binding for regmap + +Optional properties: + + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition + +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. + +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianness +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. + +Examples: +Scenario 1 : a register set in big-endian mode. +dev: dev@40031000 { + compatible = "syscon"; + reg = <0x40031000 0x1000>; + big-endian; + ... +}; -- cgit v1.3.1