From 836b2fe544a5e9b5ce116622cb36fba33838c6fd Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Fri, 4 Sep 2026 01:33:23 -0700 Subject: selftests/bpf: Check that JMP32 pointer vs zero jumps are not predicted Add jmp32_ptr_vs_zero_jne: the fall-through of the 32-bit compare, which the verifier used to skip, contains an out of bounds map value access, hence w/o the previous patch the program is accepted. See previous patch for detailed description. Reported-by: Nicholas Carlini Suggested-by: Nicholas Carlini Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/bpf/20260904083325.2083493-6-eddyz87@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi --- .../devicetree/bindings/regmap/regmap.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/regmap/regmap.txt (limited to 'Documentation/devicetree/bindings/regmap') diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 000000000..873096be0 --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -0,0 +1,29 @@ +Devicetree binding for regmap + +Optional properties: + + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition + +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. + +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianness +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. + +Examples: +Scenario 1 : a register set in big-endian mode. +dev: dev@40031000 { + compatible = "syscon"; + reg = <0x40031000 0x1000>; + big-endian; + ... +}; -- cgit v1.3.1