From 55fc280e951ab2b39f3dcb640edc1b1eebc6d173 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 31 Aug 2026 14:43:51 -0500 Subject: Input: tsc2007 - read "ti,poll-period" as u32 The "ti,poll-period" property is documented as a normal uint32 cell. The driver used a u64 helper, which makes the helper type disagree with the schema even though the stored value is still small. Read "ti,poll-period" with the u32 helper matching the documented DT cell size. Assisted-by: Codex:gpt-5-5 Signed-off-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260831194352.1185860-1-robh@kernel.org Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/regmap/regmap.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/regmap/regmap.txt (limited to 'Documentation/devicetree/bindings/regmap') diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 000000000..873096be0 --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -0,0 +1,29 @@ +Devicetree binding for regmap + +Optional properties: + + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition + +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. + +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianness +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. + +Examples: +Scenario 1 : a register set in big-endian mode. +dev: dev@40031000 { + compatible = "syscon"; + reg = <0x40031000 0x1000>; + big-endian; + ... +}; -- cgit v1.3.1