From 263f7d61a4201cde16849b2d016251806e7418be Mon Sep 17 00:00:00 2001 From: Fan Wu Date: Thu, 20 Aug 2026 13:53:06 +0000 Subject: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queued from the set_cc() and start_toggling() callbacks, which run from TCPM's kthread worker. port_stop() returns before tcpm_unregister_port() destroys that worker. Flushing the worker during unregister may therefore run a callback which queues the delayed work after port_stop() has returned. The delayed work can then run after devres has freed pmic_typec_port. Use disable_delayed_work_sync() in port_stop() to cancel a pending instance and prevent the TCPM callbacks from queueing another one. This issue was found by an in-house static analysis tool. Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Cc: stable # v6.10+ Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/regmap/regmap.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/regmap/regmap.txt (limited to 'Documentation/devicetree/bindings/regmap') diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 000000000..873096be0 --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -0,0 +1,29 @@ +Devicetree binding for regmap + +Optional properties: + + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition + +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. + +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianness +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. + +Examples: +Scenario 1 : a register set in big-endian mode. +dev: dev@40031000 { + compatible = "syscon"; + reg = <0x40031000 0x1000>; + big-endian; + ... +}; -- cgit v1.3.1