From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/pps/pps-gpio.yaml | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/pps/pps-gpio.yaml (limited to 'Documentation/devicetree/bindings/pps') diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.yaml b/Documentation/devicetree/bindings/pps/pps-gpio.yaml new file mode 100644 index 000000000..383a83874 --- /dev/null +++ b/Documentation/devicetree/bindings/pps/pps-gpio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pps/pps-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PPS Signal via GPIO + +maintainers: + - Fabio Estevam + +properties: + compatible: + const: pps-gpio + + gpios: + description: The GPIO that provides the PPS signal. + maxItems: 1 + + echo-gpios: + description: The GPIO that provides the PPS ECHO signal. + maxItems: 1 + + echo-active-ms: + description: Duration in ms of the active portion of the echo pulse. + + assert-falling-edge: + description: Indicates a falling edge assert, when present. Rising edge if absent. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + assert-falling-edge; + echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + echo-active-ms = <100>; + }; -- cgit v1.3.1